RESUME - CURRICULUM VITAEmyweb.utem.edu.my/myweb/ariff/CV File/CV PM M. ARIF HANAFIAH-2… · RESUME - CURRICULUM VITAE PERSONAL DESCRIPTION ... 11- Jawatankuasa Penasihat Kurikulum

RESUME - CURRICULUM VITAE

PERSONAL DESCRIPTION

Name : Mohd.Ariff Bin Mat. Hanafiah

Date of Birth : 10th

August 1964

Marital Status : Married

Place Of Birth : Kuala Lumpur, Wilayah Persekutuan.

Religion : Islam

I/C No. : 640810-10-8079

Nationality : Malaysian

Present Corresponding Address :

Office: Faculty of Engineering Technology,

Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya,

76100, Durian Tunggal, Melaka,

Malaysia.

Home: Lot 2746, Kampung Jus Permai,

77500, Selandar, Melaka.

Malaysia.

Telephone No. : 606-5552302/2345 (Off.)

019-6687420 (H/P)

Fax : 606-5552222/2266

E-mail : [email protected]

A C A D E M I C Q U A L I F I C A T I O N

Universiti Teknologi Malaysia 1998 to 2000 Skudai, Johor.

MASTER IN EDUCATION

SPECIALIZATION : TECHNICAL AND VOCATIONAL EDUCATION .

SUBJECT COVERED :

i Foundation of Technical and Vocational Education

ii Curriculum and Instructional Design in Technical & Vocational Education

iii Organization and Administration in Technical & Vocational Education

iv Evaluation and Assessement in Technical & Vocational Education

v Research in Education

vi Current Issues in Technical & Vocational Education

vii Human Resource and Management

viii Teaching Methodology in Technical & Vocational Education

University of Brighton 1995 to 1997 Brighton, United Kingdom.

DEGREE OF BACHELOR OF ENGINEERING

SPECIALIZATION : ELECTRICAL AND ELECTRONIC ENGINEERING

SUBJECT COVERED :

i Engineering Management v Power Electronics

ii Broadcast Engineering vi Project

iii Digital Control of Engineering Systems

iv Power and Machines

The Metallurgical Industry Training and Promotion 1992 to 1993

Society Technical Institute. Lyon, France.

PROFESSIONAL BACCALAUREAT D IPLOMA

SPECIALIZATION : MAINTENANCE OF THE AUTOMATED AND

MECHANICAL SYSTEM (MECHATRONIC).

SUBJECT COVERED :

- Automation - Electrotechnique

- Electronic - Computing (Autocad)

- Physics - Programmable Logical Controller

- Applied Mathematic - Study of Mechanism

- Engineering Drawing

- Mechanic

Allien Franchais October to December, 1991

Jalan Semarak, Kuala Lumpur.

FRENCH LANGUAGE CERTIFICATE

MARA Technical Institute ( I.K.M. ) 1986 to 1987 Petaling Jaya, Selangor.

MARA TECHNICAL INSTITUTE CERTICATE

MALAYSIAN NATIONAL VOCATIONAL TRAINING ORGANIZATION

CERTIFICATE ( MLVK INTERMEDIATE )

SPECIALIZATION : INDUSTRIAL ELECTRONIC .

Sekolah Menengah Keat Hwa 1977 to 1982 ALOR SETAR, KEDAH .

S IJ IL PELAJARAN MALAYSIA .

S IJ IL RENDAH PELAJARAN MALAYSIA .

Sekolah Rendah Jenis Kebangsaan (Cina) Sin Min 1971 to 1976 ALOR SETAR, KEDAH .

C O M P U T E R L I T E R A C Y

Operating Systems : Windows 95/98, Windows NT/2000/XP/7/8 Windows Programming Languages : VB, C, C++ Word Processing : MS Word, Power point Spread Sheet : MS - Excel Database : MS - Access Internet : HTML and JAVA Engineering Software : Matlab, PSPICE, and Work Bench, Visio,AutoCAD, Applications OrCad Machine Programming : Ladder Diagram, SFC, Instruction List (IL), FBD Langguage

P R O F E S S I O N A L Q U A L I F I C A T I O N

/ M E M B E R S H I P / A F F I L I A T I O N 1. To be the member of - Professional Engineer, Board of Engineers Malaysia 2. Malaysian Robotic and Industial Automation Interest Group (MyRaig)

A R E A S O F I N T E R E S T S

1. Industrial Automation 2. Renewable Energy 3. Power Electronics – converters design. 4. Engineering Education – OBE, POPBL etc.

PROFESSIONAL WORKING EXPERIENCE

Universiti Teknikal Malaysia Melaka Dec. 2002 to Present Faculty of Electrical Engineering

Locked Bag 1200, Ayer Keroh, 75450, Melaka.

POSITION HELD: LECTRURER / HEAD OF DEPARTMENT

CONTROL, INSTRUMENTATION & AUTOMATION

RESPONSIBILITY :

Teaching engineering subjects.

- Control Systems

- Power Electronics

- Industrial Automation

- Electrical Actuators and Drives

Involve with management, development and planning activities for the Faculty and University.

Upgrading teaching materials.

Review the syllabus and curriculum.

Conducting short/customized courses involving various public and private sectors.

Head of Department for 2 terms (2003 – 2006)

Malaysia France Institute November, 1997 to Dec. 2002 Section 14, Jalan Teras Jernang, 43650, Bandar Baru Bangi, Selangor Darul Ehsan.

POSITION HELD: LECTRURER in Automated System and Maintenance Technology.

RESPONSIBILITY :

Teaching Engineering Technology subjects:

- Automation and Industrial Controls

- Electrical Machines

- Electrical & Electronics

- Power Electronics

Upgrading teaching materials.

Review the syllabus and curriculum.

Advisor for a co-curriculum club activities.

Conducting short/customized courses involving various public and private sectors.

Developing the Technology Degree programs. (Involved both for GMI and MFI).

Motorola Malaysia Semiconductor June,1988 to September,1995 No.2, Jln. SS8/2, 47300, Petaling Jaya, Sungai Way Free Trade Zone, P.O. Box 1001, Jalan Semangat, 46960, Petaling Jaya, Selongor D. Ehsan, Malaysia.

POSITION HELD: ELECTRO-MECHANICAL TECHNICAL SPECIALIST

( ASSISTANT ENGINEER)

RESPONSIBILITY :

Conduct training for the technicians.

Scheduling the preventive Maintenance activities.

Upgrading the performance of the production machines.

Involve with the project activities.

Support the production line.

COURSES TAUGHT AT UTeM

1 - BEKC 2313: Asas Sistem Kawalan

Sesi 2002/2003 – Semester II (61 pelajar)

2 - BEKE 2443: Elektronik Kuasa

Sesi 2003/2004 – Semester I (61 pelajar)

3 - BEKE 2443: Elektronik Kuasa

Sesi 2003/2004 – Semester II (60 pelajar)

4 - BEKU 1124: Amalan Kejuruteraan

Sesi 2003-2004 – Semester III (180 pelajar)

5 - BEKE 2443: Elektronik Kuasa

Sesi 2004/2005 – Semester I (57 pelajar)

6 - BEKE 2543: Elektronik Kuasa 1

Sesi 2004/2005 – Semester II (51 pelajar)

7 - BEKC 3553: PLC & Kawalan Proses

Sesi 2005/2006 – Semester I (85 pelajar)

8 - BEKE 2533: Pemacu dan Penggerak Elektrik

Sesi 2005/2006 – Semester II (72 pelajar)

9 - BEKU 1124: Amalan Kejuruteraan

Sesi 2005-2006 – Semester III (180 pelajar)

10 - BEKE 2533: Pemacu dan Penggerak Elektrik

Sesi 2006/2007 – Semester I (64 pelajar)

11 - BEKE 2533: Pemacu dan Penggerak Elektrik

Sesi 2006/2007 – Semester 2 (64 pelajar)

12 - BEKE 2533: Pemacu dan Penggerak Elektrik

Sesi 2007/2008 – Semester I (62 pelajar)

13 - BEKE 2533: Pemacu dan Penggerak Elektrik

Sesi 2007/2008 – Semester 2 (62 pelajar)

14 - BKKS 2141 & DKKS 2141: SENI SILAT GAYUNG

Sesi 2007/2008 – Semester 2 (26 pelajar)

15- BEKE 3643: Pemacu dan Penggerak Elektrik

Sesi 2012/2013 – Semester 2 (99 pelajar)

16- BEKU 3531- Electrical Engineering Laboratory II

Sesi 2013/2014 – Semester 1 (50 pelajar)

17- BEKC 4753 - PLC & Automasi

Sesi 2013/2014 – Semester 1 (64 pelajar)

18- BEKE 3643: Pemacu dan Penggerak Elektrik

Sesi 2013/2014 – Semester 2 (68 pelajar)

19- Bengkel Semester Khas Sesi 2013/2014

30 jun – 29 Ogos 2014

20- BEKC 4753 - PLC & Automasi

Sesi 2014/2015 – Semester 1 (62 pelajar)

21- BEKE 3643: Pemacu dan Penggerak Elektrik

Sesi 2014/2015 – Semester 2 (65 pelajar)

22- BETI 4803 - Operasi & Automasi Sistem Kuasa

SESI 2015/2016 – Semester 1 (66 pelajar)

23- BETR3414 - PLC & APLIKASI

Sesi 2015/2016 – Semester 1 (77 pelajar)

24- BKKC1141 - SILAT GAYONG

(KOKURIKULUM) Sesi 1-2015/2016 (43 pelajar)

MANAGEMENT POSITIONS HELD

1. Ketua Jabatan ‘Kawalan, Instrumentasi & Automasi’ Fakulti Kejuruteraan Elektrik.

- Lantikan Pertama:1 Februari 2003 hingga 31 Januari 2005 - Lantikan Kedua: 1 Februari 2005 hingga 31 Januari 2007.

2. Penyelaras Diploma – Februari 2008 hingga September 2009

3. Jawatankuasa

Universiti:

1- Jawatankuasa Pelaksana Pengajaran dan Pembelajaran 2- Jawatankuasa Teknikal Pelan Integriti Nasional Bagi Strategi

Meningkatkan Integriti Akademik’. 3- Jawatankuasa Kerja Perhubungan Industri KUTKM. 4- Jawatankuasa Pameran Sempena Lawatan Rasmi T.Y.T. Yang Dipertua

Negeri Melaka Ke Kampus Tetap KUTKM. 5- Jawatankuasa Majlis Bersama Jabatan (MBJ)- Setiausaha Kehormat

UTeMASA. 6- Jawatankuasa Pelan Strategi Universiti. 7- Jawatankuasa Penubuhan ‘Industrial Automation and Robotic Center

(IARC)’. 8- Jawatankuasa Kumpulan Proses Pengajaran dan Pembelajaran ISO

9001-2000. 9- Jawatankuasa Pelaksana Majlis Keraian Canselor KUTKM.

10- Pensyarah Pembimbing dan Mentor kepada Pensyarah- Pensyarah Baru KUTKM.

11- Jawatankuasa Tetap Senat Pengajaran dan Pembelajaran 12- Jawatankuasa Mesyuarat ‘Outcome-Based Education’ 13- Jawatankuasa Pertandingan ROBOCON Peringkat UTeM 14- Jawatankuasa Mesyuarat Pelaksanaan Kemahiran Insaniah Fakulti: 1- Jawatankuasa Exco Dekan 2- Jawatankuasa Pengajian Siswazah 3- Jawatankuasa Penerbitan Fakulti 4- Jawatankuasa Jaminan Kualiti & Pengiktirafan

5- Jawatankuasa Penilai Tender & Penentuan Teknikal 6- Jawatankuasa Pameran. 7- Jawatankuasa Bengkel Perancangan Strategik FKE. 8- Jawatankuasa Pemeriksa & Penilaian Kertas Peperiksaan 9- Jawatankuasa Pengurusan Kampus Tetap 10- Jawatankuasa kumpulan proses Pengajaran dan Pembelajaran

peringkat Fakulti (ISO 9001-2000). 11- Jawatankuasa Penasihat Kurikulum Dan Silibus Program Mekatronik. 12- Jawatankuasa Pelaksanaan OBE. 13- Jawatankuasa Akreditasi Kursus BEKE dan BEKC 14- Jawatankuasa Pengurusan, Pembangunan IT & E-Learning 15- Jawatankuasa Pengajaran dan Pembelajaran 16- Naib Pengerusi Jawatankuasa Sekretariat Program Pembangunan

Sahsiah Fakulti Kejuruteraan Elektrik 17- Jawatankuasa Khidmat Masyarakat & Promosi 18- Jawatankuasa Penasihat Akademik & Pembangunan Pelajar

SEMINARS AND WORKSHOPS IN UTEM

1. Penceramah Program Universal Pelajar Diploma FKE.- 9 Mac 2003. Dewan Majlis Gabungan Belia Melaka, Ayer Keroh, Melaka.

2. Bengkel Penghayatan Akademik. 4-5 April 2003. Hotel Corus Paradise, P. Dickson.

3. Colloquium on Engineering Educators Should Practice Engineering. 30 April 2003. Putrajaya.

4. Bengkel ‘KUTKM Strategy Planning’. 29 Jun-2Julai 2003. Marriot Hotel, Putrajaya.

5. Bengkel Mewujudkan Budaya Kerja Berpasukan Ke Arah Kecemerlangan Akademik Siri 1. (Penggunaan Bloom Taxonomi dalam Pembinaan Soalan-TOS). – 2003. Pulau Besar, Melaka.

6. Konvensyen Kebangsaan Pendidikan Kejuruteraan: Pendekatan Berorientasi Profesion. 7-9 Julai 203. Putrajaya.

7. Pembentangan Manual Prosedure Kerja (MPK) dan Fail Meja (FM) Fakulti. 16-16 Julai 2003. KUTKM.

8. Bengkel Pemurnian Cadangan Penyelidikan Geran IRPA. 14 Ogos 2003. Hotel Renaissance, Melaka.

9. Promosi dan Pameran Sempena Melaka International Electronic & Electrical Fair. 11-14 Sept. 2003. MITC, Ayer Keroh, Melaka.

10. Ceramah Majlis Perasmian Program Universal II 2003 bagi Pelajar FKE. 14 Okt. 2003. Dewan KM Chalet, Kuala Linggi, N. Sembilan.

11. Promosi dan Pameran Sempena Persidangan OIC. – 17 Okt. 2003. Putrajaya Convention Centre, Putrajaya.

12. Bengkel Penyediaan Dokumen Akreditasi Program Akademik KUTKM. – 21 Okt. 2003. Riviera Bay Resort, Melaka.

13. Bengkel Akreditasi Program Kejuruteraan. 12 Dis. 2003. Kementerian Kerja Raya Jln Salahuddin.

14. Promosi dan Pameran – Pameran Melaka International Education Fair 2003. – 11-14 Dis. 2003. MITC, Melaka.

15. Ceramah Kerjaya di Kolej Matrikulasi Pahang. 9 Jan. 2004.

16. Bengkel Sistem Penilaian Prestasi & Penyediaan Sasaran Kerja Tahunan. 15-16 Jan. 2004. Hotel Regency, Port Dickson.

17. Bengkel Dokumentasi ISO 9001:2000. – 19-20 Jan.2004. Hotel Century Mahkota, Melaka.

18. Ceramah Kerjaya – 27 Jan. Kolej Matrikulasi Johor, Tangkak. 19. Bengkel ISO 9001:2000. – 2 Mac 2004. KUTKM. 20. Promosi dan Pameran KUTKM di Karnival Pendidikan MARA, Tahun 2004. –

13 Mac 2004.PWTC, K. Lumpur. 21. Pembentangan MPK & FM. – 25-26 April 2004. Puteri Resort, Melaka. 22. Wakil Mesyuarat Jemaah Dekan Kejuruteraan Malaysia Ke-32. – 10 April

2004, Eden Garden Hotel, Johor Bahru. 23. Perbincangan SIRIM BERHAD dengan Kumpulan Pemilik Proses MS ISO

9001:2000. – 14 April-2 May 2004. KUTKM. 24. Post Mortem Jawatankuasa Kerja Proses Pengajaran & Pembelajaran. 23

April 2004. KUTKM. 25. Pembentangan MPK & FM. – 25-26 April 2004. Puteri Resort, Ayer Keroh,

Melaka. 26. Bengkel Pemurnian Peraturan Akademik. – 6-9 Mei 2004.Concorde Inn,

KLIA. 27. Ceramah Kerjaya – 10 Mei 2004.Politeknik Seberang Perai, Pulau Pinang. 28. Ceramah Kerjaya – 11 Mei 2004. Politeknik Sultan AbduHalim Mua’adzam

Shah, Jitra, Kedah. 29. Promosi dan Pameran di Minggu Haluan Siswa KUTKM 2004/2005. 13 Jun

2004. KUTKM. 30. Juri Pertandingan Debat Teknikal Interfakulti KUTKM 2004. 16-17 Julai 2004.

KUTKM. 31. Bengkel Pelan Tindakan Universiti 2005 (Pra Mesyuarat Peringkat Fakulti). –

29 Nov. 2004. Puteri Resort, Ayer Keroh, Melaka. 32. Workshop 1 ‘ OBE-setting Objectives and Outcomes’. – 15-17 Feb. 2005.

Pan Pacific, KLIA. 33. Penceramah Jemputan Siri Penerangan Konsep Pendidikan Teknikal yang

Berorientasikan Aplikasi dan Amalan – PBL. – 23 Feb. 2005. Puteri Resort, Ayer Keroh,Melaka.

34. Ceramah Promosi – Pameran Pendidikan & Kerjaya Penyayang 2005. 26-28 Feb. 2005. Pusat Budi Penyayang, Kepala Batas, P. Pinang.

35. Bengkel Pelan Integriti Nasional (PIN) Strategi 6. – 14-16 Mac 2005. Corus Paradise Resort, P. Dickson.

36. Wakil Mesyuarat Jemaah Dekan Kejuruteraan Malaysia ke-36. – 23 April 2005. Hotel Armada, Petaling Jaya, Selangor.

37. Seminar On Strategy Management On Intelligent Property Assets.- 25 April 2005. Marriot Putrajaya, IOI Resort.

38. Workshop 2 ‘Implementing of OBE in Curriculum Design’. – 13-14 April 2005. Equatorial Hotel, Bandar Baru Bangi, Selangor.

39. Bengkel Mewujudkan Budaya Kerja Berpasukan Ke Arah Kecemerlangan Akademik Siri 2. (Assessment and Evaluation- Subject Level). – 6-8 Mei 2005. Kayn Resort, P. Dickson.

40. Ceramah Kepentingan Penyelidikan dan Pembangunan (R&D) – 2005. MRSM, Jasin, Melaka.

41. Fasilitator Bengkel “Post Workshop OBE” FKE. – 10 Jun 2005. Mahkota Century Hotel, Melaka.

42. Penyediaan Gimik untuk Majlis Makan Malam Sempena Pengisytiharan Perlantikan Canselor dan Majlis Konvokesyen Pertama KUTKM. 21 Jun-30 Julai 2005.

43. Pameran FKE Sempena Pesta Konvokesyen Pertama KUTKM 2005. 28-30 Julai 2005. Padang Dataran Sejarah, Melaka.

44. Bengkel Penasihat Kurikulum BPL(Kemahiran) MARA.-19-22 Julai 2005. 45. Promosi dan Pameran – Pesta Konvokesyen 2005. 28-30 Julai 2005.

Dataran Sejarah, Ayer Keroh, Melaka. 46. Bengkel Penasihat Kurikulum BPL(Kemahiran) MARA.-13-26 September

2005. 47. Seminar Pencapaian Penyelidikan KUTKM 2005- Enhancing Research for

Excellence. – 9-11 Sept. 2005. Swiss Garden Resort & Spa, Kuantan, Pahang.

48. Petugas Pilihanraya Majlis Perwakilan Pelajar Sesi 2005/2006.- 29 Sept. 2005. KUTKM.

49. Course on Supervision and Evaluation of Graduate Research. – 14-15 Nov. 2005. Century Mahkota, Melaka.

50. Promosi dan Pameran – Sempena Lawatan TYT Yang Dipertua Negeri Melaka ke Kampus Tetap KUTKM. 13 Dis. 2005.

51. Bengkel ‘Effective College Teaching’. – 14-15 Dis. 2005. UTM, Skudai, Johor Bahru.

52. Bengkel Jawatankuasa Penasihat Kurikulum Bahagian Pendidikan dan Latihan (Kemahiran) MARA. 14-16 Feb. 2006. Petaling Jaya, Selangor.

53. Promosi dan Pameran – 11th

Sarawak Education Exhibition and Career Guidance 2006. – 2-4 Mac 2006. Kuching, Sarawak.

54. Juri Pertandingan Debat Inter-Fakulti Piala Y.Bhg. Datuk Prof. Ismail Hassan Sesi 2005/2006. – 1 April 2006, KUTKM.

55. Pameran Sempena Hari Kantin dan Majlis Penutup Bulan Ekspresi Seni dan Eureka 2006 S.M.K. Iskandar Shah, Jasin, Melaka.

56. Bengkel Mewujudkan Budaya Kerja Berpasukan Ke Arah Kecemerlangan Akademik Siri 3. (Pengujian,Pengukuran dan Penilaian dalam pendekatan OBE). – 12-14 Mei 2006. Tanjung Bidara, Melaka.

57. Bengkel OBE Fakulti Kejuruteraan Pembuatan. – 28 Jun 2006. Century Mahkota Hotel, Melaka.

58. Bengkel Pemurnian ‘Subject Handbook’ peringkat FKE. 26 Ogos 2006. KUTKM.

59. Fasilitator Bengkel Pemurnian ‘Matrix Subjects LO’s versus PO’s’ FKE. 5 September 2006. KUTKM.

60. Bengkel Penghasilan “Learning Outcome” untuk subject Elektif BEKC. 8 Sept. 2006. FKE, KUTKM.

61. OBE- Closing the Loop (CQI). 25/09/2013.

62. Bengkel Penulisan Tesis Pantas. Murni International College, Putra Jaya.12 September 2013.

63. Kongres Majlis Profesor Negara – Istana Hotel, Kuala Lumpur. 2013. 64. Mesyuarat Agung UTeMASA. 11 September 2013. 65. Pegarah Kejohanan Silat Melayu Pertubuhan Seni Gayung Fatani Malaysia

Sempena Kejohanan Seni Mempertahankan (SMD) 2013. Anjuran Bersama Kementerian Belia dan Sukan, PESAKA Melaka dan Kerajaan Negeri Melaka. 28-29 September 2013.

66. Festival Pendekar dan Busana Tradisi Nusantara 2014, AJK dan Penasihat program Wacana Ilmu. 10-11 Mei 2014. Perkampungan Hang Tuah Duyung, Duyung, Melaka.

67. FORUM PERSIDANGAN PENSYARAH TEKNIKAL MARA (PeTMa) 2014, “

INOVASI PENDIDIKAN TEKNOLOGI KEJURUTERAAN ELEKTRIK”, 16 APRIL 2014, HOTEL ISTANA, KUALA LUMPUR.

68. Pengurus Pasukan Pertubuhan Seni Gayung Fatani Malaysia Negeri Melaka dalam Kejohan Silat Piala Tun Ali dan Tun Fatimah 2015 anjuran PESAKA Malaysia, 20-22 Feb. 2015. Melaka Mall, Melaka.

69. Penceramah “ Asas Elektrik Serta Perkembangannya Pada Masa Kini” . 28 Mac 2015. MRSM Terendak, Melaka.

70. Program AKEPT “ research and Innovation Circle (A-RIC) – Writing and Publication : Introductory (Level 1). 8 – 9 April 2015. Kampus AKEPT, Bandar Enstek, Negeri Sembilan.

71. Bengkel Semakan dan Persediaan NOSS Technical Lecturer, 27 julai 2015, Kings Hotel, Melaka.

CURRENT POSITION

1. ASSOCIATE PROFESSOR

AWARDS

1. Anugerah Khidmat Cemerlang 2004 2. Gold Medal ITEX 2008 3. 2 Bronze Medal in UTeMEX 2008 4. Silver Medal ITEX 2010 5. Bronze Medal ITEX 2010 6. Gold Medal in UTeMEX 2014 7. I-ENVEX 2014 – Gold Medal 8. ITEX 2014 – Gold Medal 9. ITEX 2014 - Brussels Special Award 10. SEOUL INTERNATIONAL INVENTION FAIR (SIIF) 2014 – Silver Medal 11. UTeMEX 2015 – Bronze Medal

PAPERS PUBLISHED / PRESENTED

1. Mohd Ruddin Ab. Ghani; Wan Nor Shela Ezwane W. Jusoh; Mohd Ariff

M.Hanafiah;Siti Hajar Raman; Jano, Zanariah, A Review of Communications

Protocol for Intelligent Remote Terminal Unit Development, International

Journal of Power Electronics and Drive System (IJPEDS), Vol.3 No.4

December 2013.

2. W.N.S.E Wan Jusoh, M.A. Mat Hanafiah, M.R Ab Ghani, and S.H Raman,

Development of a New Modeling Circuit for the Remote Terminal Unit (RTU)

with GSM Communication, 2013 IEEE Conferences on Clean Energy and

Technology (CEAT 2013) November 2013.

3. W.N.S.E Wan Jusoh, M.A. Mat Hanafiah, M.R Ab Ghani, and S.H Raman,

Remote Terminal Unit Developed for Distribution Automation System (DAS)

using MPLAB Software, 3rd

International Conferences and Exhibition on

Sustainable Energy and Advanced Material, October 2013.

4. S.H.Raman, W.N.S.E Wan Jusoh, M.A. Mat Hanafiah, and M.R Ab Ghani, A

Low Cost Wireless Data Acquisition System for Distribution Automation

System, 3rd

International Conferences and Exhibition on Sustainable Energy

and Advanced Material, October 2013.

5. M.A. Mat Hanafiah, S.H Raman, W.N.S.E Wan Jusoh, M.R Ab Ghani, and

Z.A. Baharudin, Development of a Novel Fault Management in Distribution

System using Distribution Automation System in Conjunction with GSM

Communication, International Journal of Smart Grid and Clean Energy, vol.2,

no. 3, October 2013, 330-335.

6. W.N.S.E Wan Jusoh, M.A. Mat Hanafiah, M.R Ab Ghani, and S.H Raman,

Remote Terminal Unit (RTU) Hardware Design and Implementation Efficient

in Difference Application, 2013 IEEE 7th International Power Engineering and

Optimization Conference (PEOCO), Langkawi Malaysia, 3-4 June 2013, 570-

573.

7. W.N.S.E Wan Jusoh, M.A. Mat Hanafiah, M.R Ab Ghani, and S.H Raman,

Development of Remote Terminal Unit (RTU) for the New Function of

Distribution Automation System (DAS), Power and Energy Conversion

Symposium (PECS 2012), Melaka Malaysia, 17 December 2012, 310-312.

8. S.H Raman, W.N.S.E Wan Jusoh, M.A. Mat Hanafiah, and, M.R Ab Ghani, The Implementation of fault Management in distribution Automation System Using Distribution Automation System (DAS) in Conjunction with SCADA, Power and Energy Conversion Symposium (PECS 2012), Melaka Malaysia, 17 December 2012, 305-309.

9. S.H. Raman*, M.A.M. Hanafiah, M.R. Ab Ghani, W.N.S.E. Wan Jusoh (Universiti Teknikal Malaysia Melaka, Malaysia) “A Human Machine Interface (HMI) Framework for Smart Grid System”, ISGT14 1569884909, 23-25 May

2014, Berjaya Time Square, Kuala Lumpur, Malaysia.

10. W. N. S. E. Wan Jusoh*, M.R. Ab. Ghani, M.A. Mat Hanafiah, S.H. Raman, “ Remote Terminal Unit (RTU) Hardware Design And Development For Distribution Automation System” ISGT14 1569886201, 23-25 May 2014, Berjaya Time Square, Kuala Lumpur, Malaysia.

11. Raja Roslan Raja Abd. Rahman, Mohd Taib Hj. Dora, Othman Aman, Hassan

Adnan, Mohd. Ariff Mat Hanafiah, Mohd Amin Ahmad, Norazlina Mohd

Darus “The Influenced Of Marketing Ethics Indicators Among The

Academicians In Malaysia And China”, Persidangan Antarabangsa Pengajian

Melayu 2014: Hubungan Malaysia-China, 29 May – 1 June 2014, Beijing

Foreign Studies University, China.

12. Raja Roslan Raja Abd. Rahman, Mohd Taib Hj. Dora, Othman Aman, Hassan

Adnan, Mohd. Ariff Mat Hanafiah, Mohd Amin Ahmad, Norazlina Mohd

Darus “Penggunaan Bahasa Melayu Pasar Di Kalangan Masyarakat

Malaysia”, Persidangan Antarabangsa Pengajian Melayu 2014: Hubungan

Malaysia-China, 29 May – 1 June 2014, Beijing Foreign Studies University,

China.

SUPERVISION FOR FINAL YEAR STUDENTS

1. LIEW TYE LEONG (Development of a 3 Level Elevator Car Park System Controlled

by PLC))

2. JOSEPHENE J.ENDAM (3-Phase 115-230 Volts 0.5Hp Variable Speed Drive Controller )

3. MUHAMMAD BIN ZAKARIA (Design and build the DC-DC Buck Converter for Domestic and

Industrial application)

4. MOHD FADIR BIN SIDI (Design and build the Object Recognition and Sorting System

using Pneumatic Manipulator and PLC)

5. MOHD YUSAIRI BIN YAHYA (Servo Motor Speed controller)

6. MEMORIA ANAK JANGOH (Design and Implementation of An Automated Workpiece

Pattern Recognition System Using Sensors and PLC)

7. DORA JAU (Design and Implementation of An Automated Workpiece

Loader Indexer-Table Station Using Sensors and PLC)

8. ZAIAYU BINTI A.RAHMAN (Design and Implementation of An Automated Liquid Level

Controller Using Ultrasonic Sensor and PLC)

9. MASRURUL AZNI BIN ABDUL AZIZ (Design and Implementation of An Automated Temperature

Controller Using Sensor and PLC)

10. AZMAN BIN HAMZAH (Design and Implementation of An XY Servo Palletizing

Machine)

11. MOHD HELMI BIN SUID (Design and Implementation of Pick and Place System Using

Controlled Robotic Arm)

12. MOHD SAIFULDDIN BIN PUTEH

(Energy Efficiency IN Office Building – Practical Case Study)

13. HAZWAN RODZI BIN AHMAD SAPUAN (Design and Implementation of An Automatic Storage and

Retrieval Station)

14. MUHAMMAD MUIZZ BIN MOHD NAWAWI (Smart Greenhouse Using PIC16F877A Microcontroller)

15. MUHAMMAD FAIZAL BIN ZAINAL ABIDEEN (PC-Based 3 Axes Robot Arm Control System)

16.ASMA BINTI ZULKIFLI (Automated Storage and Retrieval System)

17.MOHD AIZAT BIN AHMAD MURAD (Automatic Can System)

18.MOHD ASNAWI BIN SAIMON (Automated Filling and Caping Machine)

19.MOHD ASRAF BIN JASNI (Automated Guided Vehicle (AGV) Using PLC)

20.MOHD HAYATULNIZAM BIN MOHD NASIR (Moving Train-Car Traffic Controller)

21.MOHD SYAHID BIN ALWI (Moving Train-Car Traffic Controller)

22.MOHD ZULFADLI BIN ABDULLAH (Design and Implementation of Smart Home Security System)

23.ROZANA BINTI ABDULLAH (Automated Storage and Retrieval System)

24. MOHAMMAD YAZID BIN ABDUL RAZAK (The development of Low Voltage Distribution Automation System Based on Remote Terminal Unit ABB RTU211)

25. MUHAMMAD SYAFIQ BIN MOHAMMAD ROSLAN (Communication Protocol Via Wireless LAN To Communicate Between Master and Slave of RTU System)

26. NUR FATIHAH BINTI MOHD MARZUKI (A Smart Home Security System Based on ZigBee )

27. MOHAMMAD HARIZ BIN ZAHIR (Development of Human machine Interface (HMI) and Interfacing for Low Voltage Distribution Automation System (DAS) )

28. NUR ATIQAH BINTI MAT YAMAN (Data Acquisition of Distribution Automation System (Das) for GSM Communication)

29. MOHAMMAD SYAMIL AZIZI BIN ARIFFIN (Data Acquisition of Distribution Automation System (Das) for GSM Communication)

30. MUHAMMAD AZLAN ARIF BIN SA’ADON (Human Machine Interface development for A Distribution Automation System)

31. NOOR AMIRAH BINTI ABD HALIM (Microcontroller-Based Automated Manipulator system)

32. ALI KHALED ALI AL-FARAWI (Microcontroller and Zigbee-Based Public Transportation (Bus) Awareness System)

33. MOAYAD ELNOUR AHMED ELNOUR (RFID-Based Price Tag Scanner)

SUPERVISION FOR POSTGRADUATE STUDENTS

MASTER:

1.THOMAS WEE HENG BOON – Main Supervisor

2. NORASID BIN MAJID – Co. Supervisor

3. AHMAD FARIZ BIN FAUZI – Co. Supervisor

4.WAN NOR SHELA EZWANI BINTI WAN JUSOH - Co. Supervisor

5. SITI HAJAR BINTI RAMAN - Co. Supervisor

6. PUTERI NORSUHAILA BINTI AB RAHMAN - Co. Supervisor

PROFESSIONAL TRAINING AND WORKSHOP

Kolej Universiti Teknikal Kebangsaan Malaysia 2-3 November 2004 Ayer Keroh, Melaka.

TRAINING: Train The Technical Trainer (FMM Institute of Manufacturing)

IPC – Association Connecting Electronics Industries 26 April - 2 May 2004 Melbourne, Australia

TRAINING: IPC-A-610, Acceptability of Electronic assemblies – Class A Instructor

Kolej Universiti Teknikal Kebangsaan Malaysia 19-20 January 2004 Ayer Keroh, Melaka.

TRAINING: Dokumentasi ISO 9001:2000 (SIRIM)

Multimedia University 18-19 December 2003 Cyberjaya, Putrajaya.

TRAINING: Power Electronics & Electrical Drives – Theoretical and Experimental Approaches

Kolej Universiti Teknikal Kebangsaan Malaysia 14 April 2003 Ayer Keroh, Melaka.

TRAINING: Conducting Research and Writing Technical Journal/Conference Papers of International Standard Workshop

Kolej Universiti Teknikal Kebangsaan Malaysia April, 2003 Ayer Keroh, Melaka.

TRAINING: Dynamic Use of English for Lecturers

Kolej Universiti Teknikal Kebangsaan Malaysia March, 2003 Ayer Keroh, Melaka.

TRAINING: Protocol and Social Etiquette Skill

Kolej Universiti Teknikal Kebangsaan Malaysia January, 2003 Ayer Keroh, Melaka.

TRAINING: Basic Teaching Methodology and Pedagogy for Lecturers (Organized by UTM)

Malaysia France Institute April, 2002 Bandar Baru Bangi, Selangor.

TRAINING: Variable Speed Drive On AC Motor

University Kebangsaan Malaysia October, 2000 The Faculty of Engineering, Bandar Baru Bangi, Selangor Darul Ehsan.

TRAINING: Matlab Applications in Engineering.

Malaysia France Institute September, 2000 Bandar Baru Bangi, Selangor.

ROBOTIC TRAINING: Operating, Programming and Maintenance of Robotic.

Institute of Professional Advancement June, 1999

Petaling Jaya, Malaysia

TRAINING: Effective Maintenance and Operations of Electrical Plants and Equipment.

University Kebangsaan Malaysia April, 1999 The Faculty of Education, Bandar Baru Bangi, Selangor Darul Ehsan.

TRAINING: Course Development

University Kebangsaan Malaysia Mac, 1999 The Faculty of Education, Bandar Baru Bangi, Selangor Darul Ehsan.

TRAINING: Counselling and Motivation

Malaysia France Institute October, 1998 Bandar Baru Bangi, Selangor.

TRAINING: Motor Starter and Equipment

GEC – ALSTHOM VELAN July to September, 1992

Nuclear Electric Valves Manufacture July to September, 1993 Lyon, France.

INDUSTRIAL ATTACHMENT : Repairing, Servicing and Maintaining The

CNC Milling Machines.

CONSULTATIONS/SHORT

COURSES/SEMINARS/WORKSHOPS

Course Leader/Trainer for Malaysia France Institute (MFI) Customised/Short

Courses

- SENSORS AND INDUSTRIAL PROCESS CONTROL , SELECTION

AND S IZING (MAPA) 2 – 3 MAY 2001

- INDUSTRIAL AUTOMATION (M INISTRY OF EDUCATION) 3 – 14 SEPTEMBER 2001

- SENSORS (NATIONAL SEMICONDUCTORS) 2 & 16 MARCH 2002

- INDUSTRIAL ROBOTICS AND ITS APPLICATION (JABATAN TENAGA

RAKYAT) 3 – 21 JUNE 2002

- INDUSTRIAL AUTOMATION AND ROBOTICS (SLDP) 5 – 23 AUGUST 2002

- SENSORS IN INDUSTRIAL PROCESS CONTROL (ASIAN NDK CRYSTAL

SDN BHD) 12 – 14 NOVEMBER 2002

Kolej Universiti Teknikal Kebangsaan Malaysia (KUTKM)

- IPC – A – 610C W ORKER PROFICIENCY TRAINING COURSE

(KUTKM LECTURERS ANDTEACHING ENGINEERS)

- EXPO SCIENCE , TECHNOLOGY & INNOVATION 2004

- CONFERENCE ON ENGINEERING EDUCATION 2004 (IMPLEMENTING

PROBLEM-BASED LEARNING IN POW ER ELECTRONICS-KUTKM

EXPERIENCE).

- SEMINAR ON BLOOM TAXONOMY FOR CONSTRUCTING THE

EXAMINATION QUESTIONS (STAFF OF FACULTY OF ELECTRICAL

ENGINEERING) 2005.

- SEMINAR ON PROBLEM-BASED LEARNING (PBL) APPROACH FOR

ENGINEERING EDUCATION ( FKE AND FKEKK STAFF) 2005.

- SEMINAR ON ASSESSMENT , MEASUREMENT AND EVALUATION IN

ENGINEERING EDUCATION (STAFF OF FACULTY OF ELECTRICAL

ENGINEERING) 2005.

- W ORKSHOP ON OUTCOME-BASED EDUCATION (OBE) – DEVELOPING

THE LEARNING OUTCOMES (STAFF OF FACULTY OF ELECTRICAL

ENGINEERING) 2005.

Universiti Teknikal Malaysia Melaka (UTeM)

- TECHNOLOGY PROVIDER FOR KKTM GAMBANG, KUANTAN ,

PAHANG.

- PENASIHAT AKADEMIK UNTUK PROGRAM D IPLOMA HND,

WIT, PANDAMARAN , KELANG.

- PEMBANGUN NOSS JPK

COMMUNITY SERVICES

1. Setiausaha Agung Pertubuhan Seni Gayung Fatani Malaysia (Sessi 2013 – 2015).

2. Pengerusi dan Guru Negeri Pertubuhan Seni Gayung Fatani Malaysia- Negeri Melaka.

3. Presiden UTeMASA (UTeM Academic Staff Association). 4. Penolong Setiausaha “Majlis Bersama Badan Berkanun Malaysia” 5. Ahli Majlis Persatuan Akademik Malaysia (MAAC). 6. Penolong Pengerusi AJK Surau An Nur, Selandar, Melaka. 7. AJK Pertubuhan Yayasan Warisan Ummah Malaysia. 8. Ahli Jawatankuasa EXCO PESAKA (Persekutuan Silat Kebangsaan

Malaysia) – Biro Silat Seni

OTHERS

Speaking/Writing language

Malay.

French.

English

Mandarin - speaking

Hokkien - speaking

Bearer of Malaysian Driving Licence D and U.K International Licence.

Interests:

Reading.

Football

Badminton

Martial Art ( Seni Gayung Fatani Malaysia)

Referees :

DOCTOR Z IKRI ABADI B IN BAHARUDIN

LECTURER

FACULTY OF ENGINEERING TECHNOLOGY

UNIVERSITI TEKNIKAL MALAYSIA MELAKA

HANG TUAH JAYA, 76100,DURIAN TUNGGAL ,MELAKA.

AHMAD IDIL B IN ABUL RAHMAN

LECTURER

FACULTY OF ENGINEERING TECHNOLOGY

UNIVERSITI TEKNIKAL MALAYSIA MELAKA

HANG TUAH JAYA, 76100,DURIAN TUNGGAL ,MELAKA.