This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Headquaters10141 Olney StreetEl Monte, CA 91731Made in the USA REVISED: 03/17/2021
resourcesmounting hardwarePlease consult factory regarding any questions or inquires about mounting optionsNot all mounting hardware options are suitable for all fixtures.
SWING-OUT JACKS• Compatible with selecte type of recessed flanged fixtures• Spring loaded adjustable mounting bracket for mounting in drywall or plaster type ceiling• Two (2) brackets on each side of fixture housing• Four (4) per fixture
HANGER YOKES• Compatible with all types of recessed flanged fixtures• 1/4” - 20 x 21/2” machine screws located into knockouts on back of fixture housings• Two (2) per fixture
43/8"
X
Y
CHAIN MOUNT COUPLING• Chain mount coupling with lift-up tabs for installation of V-Hooks when
Headquaters10141 Olney StreetEl Monte, CA 91731Made in the USA REVISED: 03/17/2021
CEILING SPACERS• Minimum one (1) of each per fixture• May need to drill own holes
FIS-7• Feed-in spacer mounts to junction box, spaces fixture
11/2” from ceiling
CS-3• Closed spacer, spaces fixture 11/2” from ceiling
CANOPY SUSPENSION• Ball action joint provides a full circumferential 45° swivel action• Canopy bowls turn-lock onto bracket• Baked white enamel (other finishes available as specified)• Minimum one (1) of each per fixture
Headquaters10141 Olney StreetEl Monte, CA 91731Made in the USA REVISED: 03/17/2021
CS10V4CS10V6CS10
VTCS10 V-HOOK• Hooks install at end of fixture and
in “CMC” tabs between fixtures when chain mounted in rows
• Two (2) per fixtureSelf-locking device• Secures free end to ceiling
10' Cable Standard• One-end free, other end
secured within the fixture• 100lbs work load• 500lbs break load
V-Hook
Self-locking device• Secures free end to ceiling
10' Cable Standard• One-end free, other end
secured within the fixture• 100lbs work load• 500lbs break load
Fixture housing
Toggle Plates• Toggle plates through 3/8" passing holes and
anchored in the fixture housing
Y-TOGGLE-END / CABLE SUSPENSION SYSTEM
CAT. NO FOR FIXTURE SERIES
V4 4” LEG HEIGHT(100/200/240/500) Series
V6 6” LEG HEIGHT(300/400) Series
V-HOOK / CABLE SUSPENSION SYSTEM
ROTATABLE HOOK / CABLE MOUNTING SYSTEM• Hook / cable mounting system designed for single point hook mounting applications• Rotatable plate allows fixture to rotate for final adjustment• Ideal for retrofit project when round shaped HID fixtures are replaced by rectangular shaped fluorescent highbay
RHC-F36• Hook / cable system with fixed length cables
3/8” passing-holes and anchored in fixture housing and the rotatable mtg. plate
RHC-A60/F12• Hook / cable system with adjustable length cables
60” Cable, 2x• 60” cable standard• One end free & the other
end with toggle plate installed
• Other lengths as specified• 100lbs. work load• 500lbs. break load
Hook Assembly
Toggle Plates• Toggle plates through
3/8” passing-holes and anchored in fixture housing and the rotatable mtg. plate
Self-locking device• Secures free end to ceiling
45° MOUNTING BRACKET45MB
• 45° mounting bracket designed for mounting lighting fixtures at 45° angle• Ideal for wall or ceiling mount applications• 18 ga. electro-galvanized steel• Baked white powder coated finish
Note: must drill own holes for 45° mounting bracket