Repositionable Woodworking Tapes Easy to reposition Reduces or eliminates clamping Removes cleanly* Tears easily by hand Multi-purpose double sided tape for templates, jigs, pattern routing, planer or drum sander shaping, and the fixation or alignment of parts. Ideal for professionals and all woodworkers! *Adhesive may react differently to different substrates or wood types, test small surface area prior to use for adhesive residue and removability. Wear ANSI approved safety glasses with side shields and gloves when cutting or handling wood or other materials. For projects generating dust or nuisance vapors, a NIOSH approved dust mask should also be worn. Removable adhesive next to liner, permanent adhesive on the opposite side Removable liner DOUBLE SIDED TAPE
2
Embed
Repositionable Woodworking Tapes...Repositionable Woodworking Tapes Easy to reposition Reduces or eliminates clamping Removes cleanly* Tears easily by hand Multi-purpose double sided
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Repositionable Woodworking Tapes
Easy to reposition
Reduces or eliminates clamping
Removes cleanly*
Tears easily by hand
Multi-purpose double sided tape for templates, jigs, pattern routing, planer or drum sander shaping, and the fixation or alignment of parts.
Ideal for professionals and all woodworkers!
*Adhesive may react differently to different substrates or wood types, test small surface area prior to use for adhesive residue and removability.
Wear ANSI approved safety glasses with side shields and gloves when cutting or handling wood or other materials. For projects generating dust or nuisance vapors, a NIOSH approved dust mask should also be worn.
Removable adhesive next to liner, permanent adhesive on the opposite side
Please refer to Tapes.AveryDennison.com for complete terms and conditions, including warranty terms, relating to this product. You should periodically review the site as terms and conditions are subject to change without notice.
For more information on our bonding tapes and adhesive solutions, visit Tapes.AveryDennison.com
Instructions for use (machining applications)
1. Make sure all working surfaces are clean, dry and dust free.
2. Remove the tape roll from the re-sealable package and cut to the required length, return the roll to the package to keep it clean and protected.
3. Press the exposed adhesive side to the surface material or template where a semi-permanent bond is required, applying even pressure along the tape to remove air gaps.
4. Pull the liner backing off to expose the repositionable adhesive side.
5. Place the template onto your material or place the material to be machined directly onto the taped surface.
6. Verify alignment and positioning.
7. If not aligned properly, remove and reposition.
8. Proceed with the machine operation.
9. Remove the finished piece from the taped surface.
10. If the removable surface side of the tape is clean, reattach to the next part to be machined and repeat steps 6 to 10 making sure to test that the bond is strong enough to not slip during the machining process. The number of uses of the same piece of tape depends on how clean it remains. Do not repeat procedures if the adhesive does not hold properly.
Instructions for use (fixation of precisely aligned parts such as drawer fronts)
1. Make sure all working surfaces are clean, dry and dust free.
2. Remove the tape roll from the re-sealable package and cut to the required length, return the roll to the package to keep it clean and protected.
3. Press the exposed adhesive side to the surface material or template where a semi-permanent bond is required, applying even pressure along the tape to remove air gaps.
4. Pull the liner backing off to expose the repositionable adhesive side.
5. Place the part to be attached (like a drawer front) onto the tape surface.
6. Verify alignment and positioning.
7. If not aligned properly, remove and reposition.
8. Attach the two parts permanently with a mechanical fastener.
Tape can be doubled or tripled if there is a gap due to uneven or warped surfaces.