Top Banner
OEM names and part numbers are used to identify part numbers. Our products are not affiliated with, sponsored or approved by the original equipment manufacturer. Replacement spare parts for FETTE tablet compression equipment INTERNATIONAL INVENTORY MANAGEMENT 456 MANNING AVENUE ELON, NC 27244 TEL 001 336 584 4777 FAX 001 336 584 9540 410 NORTH 1650 WEST SPRINGVILLE, UT 84663 TEL 001 801 491 7022 FAX 001 801 491 7014 www.iimnc.com rev 120816
18

Replacement spare parts for FETTE · Replacement spare parts for FETTE tablet compression equipment ... 17857 Plate, Wear 3200 3090 24660 ... Take off arm, with air assist . 3200

Apr 20, 2018

Download

Documents

buidiep
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
  • OEM names and part numbers are used to identify part numbers. Our products are not affiliated with, sponsored or approved by the original equipment manufacturer.

    Replacement spare parts for

    FETTE tablet compression equipment

    INTERNATIONAL INVENTORY MANAGEMENT 456 MANNING AVENUE

    ELON, NC 27244

    TEL 001 336 584 4777

    FAX 001 336 584 9540

    410 NORTH 1650 WEST SPRINGVILLE, UT 84663

    TEL 001 801 491 7022

    FAX 001 801 491 7014

    www.iimnc.com

    rev 120816

  • 456 MANNING AVENUE ELON, NC 27244 USA

    TEL 001 336 584 4777 FAX 001 336 584 4950

    Fette Spare Parts Catalog

    Table of Contents

    Section 1 Pages 3-4 Lubrication felts

    Section 2 Page 5 Seals

    Section 3 Pages 6-10 Cams, rails etc.

    Section 4 Pages 11-16 Feed frames & related components

    Section 5 Pages 17-18 Dust cups

    Notice to copyright: this publication, including all portions hereof, is copyrighted by IIM and is protected by the copyright laws of the United States and other respecting Proprietary rights. No part of this publication, including any portion herein, may be reproduced, transmitted, or redistributed in any form, or by any means, electronic or mechanical or otherwise, including photocopying, recording, or use in any information storage and retrieval system, without written permission from IIM. Such unauthorized reproduction, transfer, and/or use may be a violation of criminal and civil law.

  • Section 1: lubrication felts

    Picture IIM p/n Description Model

    14996 Felt, Lube, 1.25 x 3 3200

    3090

    15451 Felt, Lube, 1.375 x 2.75 3200

    3090

    25050 Felt, Lube, for holder 3109768 3200

    3090

    24496 Felt, Lube, B-Size 3200

    3090

    15452 Felt, Lube, B-Size 3200

    3090

    14997 Felt, Lube, B-Size 3200

    3090

    Page 3www.iimnc.com (336) 584-4777 x 2229 Page 3

  • Picture IIM p/n Description Model

    25051 Felt, Lube, B-Size, for holder 3109768 3200

    3090

    24470 Felt, Lube, D-Size 3200

    3090

    24497 Felt, Lube, D-Size 3200

    3090

    Page 4www.iimnc.com (336) 584-4777 x 2229 Page 4

  • Section 2: seals

    Picture IIM p/n Description Model

    403 Seal, punch, B-size,upgraded 3200 3100 3090 3000 2200 2090

    24586 Seal, punch, D-size, metal rim 3200 3100 3090 3000 2090

    25952 Seal, punch, D-size, metal rim, slightly smaller OD and lower profile for newer turrets

    3200 3100 3090 3000 2090

    23203 Seal, punch, D-size, old style 3200 3100 3090 3000 2090

    10247 Tool, seal installation and removal, B & D size tooling

    3200 3090 2200 2090

    Page 5www.iimnc.com (336) 584-4777 x 2229 Page 5

  • Section 3: cams

    Picture IIM p/n Description Model

    20958 Rail, Hold Down 3200

    3090

    17857 Plate, Wear 3200

    3090

    24660

    17837

    Rail, catch, IPT 1 (D size)

    Rail, catch, IPT19 (B size)

    3200

    3090

    24209 Rail, catch, IPT19 (B size) 2200

    2090

    24577 Ledge, Pulldown, IPT-1, D-size 3200

    3090

    16950 Cam, lowering bar, B-size 3200 3090

    23584 Cam, lowering bar, B-size 2200 2090

    Page 6www.iimnc.com (336) 584-4777 x 2229 Page 6

  • Picture IIM p/n Description Model

    24657 Cam, Shank Lube, Inside, IPT 1 3200

    3090

    24658 Insert cam, B-size 3200 3090

    25735 Insert cam, D-size 3200 3090

    26361 Ledge, holding, upper, D-size 2200 2090

    17846

    25736

    Ledge, Plastic, IPT-19 (B-size)

    Ledge, Plastic, IPT-1 (D-size)

    3200

    3090

    24576 Ledge, compression, B-size 3200 3090

    24574 Ledge, compression, D-size 3200 3090

    Page 7www.iimnc.com (336) 584-4777 x 2229 Page 7

  • Picture IIM p/n Description Model

    24194

    24273

    Ledge, pre-pressure, plastic

    Ledge, pre-pressure, plastic, older version

    3200 3090

    26395

    Cam, Flight, Plastic 2200 2090

    15062

    15063

    Cam, Flight, bronze

    Cam, Flight, plastic

    2200 2090

    24661 Plate, Cover, small B-size 3200 3090

    24659 Plate, Cover, Large D-size 3200 3090

    24573 Punch Head Lube Cam, D-size 3200 3090

    Page 8www.iimnc.com (336) 584-4777 x 2229 Page 8

  • Picture IIM p/n Description Model

    26215

    25612

    Punch Head Lube Cam, B-size, Bronze

    Punch Head Lube Cam, B-size, Plastic

    3090

    25308

    25412

    Tight punch control/ejection cam assembly with removable insert

    Customer base provided: modified, insert/hardware added

    3200 3090 2200 2090

    25309 Insert for tight punch control/ejection cam assembly

    Used in assembly #25308

    3200 3090 2200 2090

    943 Tight punch control/ejection cam, original one-piece version

    See #25308 for upgrade

    3200 3090 2200 2090

    20956 Cam, Transition 3090

    24536 Load cell ramp, original one-piece version

    See #25432 for upgrade

    3200 3090

    Page 9www.iimnc.com (336) 584-4777 x 2229 Page 9

  • Picture IIM p/n Description Model

    25432

    25434

    Load cell ramp assembly, with removable insert

    Customer base provided: modified, insert/hardware added

    3200 3090

    15471 Insert, removable, for upgraded load cell ramp assembly

    3200 3090

    Page 10www.iimnc.com (336) 584-4777 x 2229 Page 10

  • Section 4: feed frames and related components

    Picture IIM p/n Description Model

    316 Base, feed frame, aluminum 3200 3090

    26506

    26424

    Base, feed frame, UHMW

    Base, feed frame, Delrin

    3200 3090

    16092 Base, feed frame, aluminum 2200 2090

    25061

    25062

    Base, feed frame, bi-layer

    Insert, feed frame, bi-layer

    3090

    25427

    25428

    Base, feed frame, bi-layer

    Insert kit, 3 piece, feed frame

    3090 3200

    317 Base, feed frame, aluminum 3000

    www.iimnc.com (336) 584-4777 x 2229 Page 11

  • Picture IIM p/n Description Model

    27863

    25874

    Insert, wear strip, delrin

    Insert, wear strip, feed frame, for use with feed frame FA39033

    3090

    25874 Insert, wear strip, 26mm 3090

    27256 Insert, wear strip, 11mm 2090

    27257 Insert, wear strip, 16mm 2090

    132 Strip, F.O.M seal, 5 x 9 x 610

    5077

    5805

    Drive shaft, Fill-O-Matic, plastic

    O-ring

    3090

    25481 Paddle wheel 2090 3090

    www.iimnc.com (336) 584-4777 x 2229 Page 12

  • Picture IIM p/n Description Model

    24499 Sleeve, paddle wheel 2090 3090

    24471 Screw, shroud fastener 3200 3090

    350 Screw, die lock 2090 3090

    25508 Pre-compression roller 3000

    7668

    24972

    Compression roller with bearing

    Compression roller only without bearing

    3200 3090

    24633 Bearing, compression roller 3200 3090

    12981 Punch retaining strip 3200 3090

    www.iimnc.com (336) 584-4777 x 2229 Page 13

  • Picture IIM p/n Description Model

    17858 Gate, fast 3200 3090

    24686 Cover, re-circulation scoop 3200 3090

    17889 Cover, scraper 3200 3090

    24197 Scoop, re-circulation 3200 3090

    976

    26417

    Scraper, bronze

    Scraper, titanium

    3200 3090

    21592 Scraper, plastic 3200 3090

    5078

    27392

    Scraper, bronze

    Scraper, plastic

    2090 2200

    www.iimnc.com (336) 584-4777 x 2229 Page 14

  • Picture IIM p/n Description Model

    25409 Scraper, plastic 2090 2200

    25410

    26418

    Scraper, bronze

    Scraper, titanium

    3000 3100

    24923 Take off arm, with air assist 3200 3090

    25035 Take off arm, without air assist 3200 3090

    25411 Take-off arm, with air assist 3090

    25087 Take off arm, without air assist, stainless steel

    3200 3090

    28171 Take-off arm, with air assist, plastic 3090

    www.iimnc.com (336) 584-4777 x 2229 Page 15

  • Picture IIM p/n Description Model

    31128 Take-off arm, with air assist, stainless steel 3090

    365 Tail over die, upgraded 3200 3090

    13368 Tail Over Die 3000 3100

    25413 Tail Over Die 2200

    www.iimnc.com (336) 584-4777 x 2229 Page 16

  • Section 5: dust cups

    Picture IIM p/n Description

    6087

    BB2, 29mm, #1, food grade blue

    6088

    D3, 35mm, #2, food grade blue

    6089

    D3, 41mm, #3, food grade blue

    25344

    25mm, clear, blank, replaces Natoli #1

    www.iimnc.com (336) 584-4777 x 2229 Page 17

  • Picture IIM p/n Description

    21751

    31mm, clear, replaces Natoli #2

    21747

    35mm, clear, replaces Natoli #3

    25698

    28mm, clear, 18mm hole, Euro style

    26301

    31mm, clear, 0.3437 hole

    www.iimnc.com (336) 584-4777 x 2229 Page 18

    Section 3 cams.pdfFits base #25307