Top Banner
24 24 REPAINT DOORS WITH AURA ® GRAND ENTRANCE Remove accents. Protect hardware from drips and leaks. Clean the surface. Remove any loose dirt or mildew. Tape off the surface. Prevent drips and spatters on seams and remaining hardware. Prime your door. Use Fresh Start® Primer to create the ideal base surface for the new paint. Sand lightly. Use 220-grit sandpaper to smooth out the surface. Apply second coat. Fully cover the door for the best coverage and finish. Let the paint dry for 24 hours. 2 1 4 8 7 Scrape and sand away paint. Focus on old drips or chips that make the surface uneven. Sand down the surface with the right grit sandpaper. Apply the first coat. Cut in nooks and trim with an angled brush. Use a roller for flat surfaces. Let the paint dry for 24 hours. Reinstall the hardware. See this and other How-To videos at YouTube.com/BenjaminMoore 3 9 5 6 ©2017 Benjamin Moore & Co., Limited. Aura, Benjamin Moore, Fresh Start, Paint Like No Other and the triangle “M” symbol are registered trademarks of Benjamin Moore & Co., Limited.
1

REPAINT DOORS WITH AURA GRAND ENTRANCE

Dec 18, 2021

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: REPAINT DOORS WITH AURA GRAND ENTRANCE

24

24

REPAINT DOORS WITH AURA®

GRAND ENTRANCE

Remove accents. Protect hardware from drips and leaks.

Clean the surface. Remove any loose dirt or mildew.

Tape o� the surface. Prevent drips and spatters on seams and remaining hardware.

Prime your door. Use Fresh Start® Primer to create the ideal base surface for the new paint.

Sand lightly. Use 220-grit sandpaper to smooth out the surface.

Apply second coat. Fully cover the door for the best coverage and finish. Let the paint dry for 24 hours.

21

4

87

Scrape and sand away paint. Focus on old drips or chips that make the surface uneven. Sand down the surface with the right grit sandpaper.

Apply the first coat. Cut in nooks and trim with an angled brush. Use a roller for flat surfaces. Let the paint dry for 24 hours.

Reinstall the hardware.

See this and other How-To videos at YouTube.com/BenjaminMoore

3

9

5 6

©2017 Benjamin Moore & Co., Limited. Aura, Benjamin Moore, Fresh Start, Paint Like No Other and the triangle “M” symbol are registered trademarks of Benjamin Moore & Co., Limited.