REMOVAL & INSTALLATION WARNING: This application is an interference engine. DO NOT rotate camshafts or crankshaft when timing belt is removed, or engine damage may occur. REMOVAL & INSTALLATION > FRONT TIMING BELT Tip: safe mark CAUTION: DO NOT rotate crankshaft or camshafts with timing belt removed and cylinder heads installed. CAUTION: Camshaft timing belt must be replaced if cylinder head is to be removed or if drive gears, tensioner or coolant pump are to be replaced. Camshaft timing belts must be stored and handled with care. Always store a camshaft timing belt on its edge with a bend radius greater than 2.0" (50 mm). DO NOT use a camshaft timing belt that has been twisted or bent double, as this will damage reinforcing fibers. DO NOT use a camshaft timing belt if debris other than belt dust is found in timing belt covers. DO NOT use a camshaft timing belt if partial engine seizure has occurred. DO NOT reuse a camshaft timing belt if mileage exceeds 45,000 miles. DO NOT use an oil or coolant contaminated timing belt (cause of contamination must be rectified). REMOVAL & INSTALLATION > FRONT TIMING BELT > REMOVAL TIMING BELT REPLACEMENT 2002 Land Rover Freelander 2.5L Eng S Printer Friendly View http://www1.prodemand.com/Print/Index?content=tabs&module=true&tab=true&terms=true&y... 1 of 46 8/23/2014 3:14 PM Edited with the trial version of Foxit Advanced PDF Editor To remove this notice, visit: www.foxitsoftware.com/shopping
14
Embed
REMOVAL & INSTALLATION > FRONT TIMING BELT · REMOVAL & INSTALLATION WARNING: This application is an interference engine. DO NOT rotate camshafts or crankshaft when timing belt is
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
REMOVAL & INSTALLATION
WARNING: This application is an interference
engine. DO NOT rotate camshafts or crankshaft when
timing belt is removed, or engine damage may occur.
REMOVAL & INSTALLATION > FRONT TIMING BELT
Tip: safe mark
CAUTION: DO NOT rotate crankshaft or camshafts
with timing belt removed and cylinder heads installed.
CAUTION: Camshaft timing belt must be replaced if
cylinder head is to be removed or if drive gears,
tensioner or coolant pump are to be replaced. Camshaft
timing belts must be stored and handled with care.
Always store a camshaft timing belt on its edge with a
bend radius greater than 2.0" (50 mm). DO NOT use a
camshaft timing belt that has been twisted or bent
double, as this will damage reinforcing fibers. DO NOT
use a camshaft timing belt if debris other than belt dust is
found in timing belt covers. DO NOT use a camshaft
timing belt if partial engine seizure has occurred. DO
NOT reuse a camshaft timing belt if mileage exceeds
45,000 miles. DO NOT use an oil or coolant
contaminated timing belt (cause of contamination must
be rectified).
REMOVAL & INSTALLATION > FRONT TIMING BELT > REMOVAL