Rehabilitation of Sick Industry Financed by Bangladesh Development Bank Ltd CHAPTER ONE INTRODUCTION 1.1 Background of the Study: With a view to acquiring in-depth knowledge about practical aspect of modem business I was attached with Bangladesh Development Bank Ltd for the purpose of internship program. The academic program of Accounting Department requires every MBA Student to undergo an Internship Program. Keeping this view in consideration, students of MBA are advised to visit Organizations/Institutions and discuss with management personnel for gathering practical knowledge. After completion my study and field work. I would write up an internship report under supervision of the Assistant Professor Rumana Ahmed, Department of Accounting & Information Systems, University of Dhaka. I have made this report under his guidance and supervision on the rehabilitation of sick industries financed by Bangladesh Development Bank Ltd. Bangladesh Development Bank Ltd was setup for the purpose of industrialization of our country after liberation. Our economic growth rate is very low. So for the economic development, industrial growth is obligatory. More or less Bangladesh is an agricultural
57
Embed
Rehabilitation of Sick Industry Financed by Bangladesh Development Bank Ltd
With a view to acquiring in-depth knowledge about practical aspect of modem business I was attached with Bangladesh Development Bank Ltd for the purpose of internship program. The academic program of Accounting Department requires every MBA Student to undergo an Internship Program. Keeping this view in consideration, students of MBA are advised to visit Organizations/Institutions and discuss with management personnel for gathering practical knowledge.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Rehabilitation of Sick Industry Financed by Bangladesh Development Bank Ltd
CHAPTER ONE
INTRODUCTION
1.1 Background of the Study:
With a view to acquiring in-depth knowledge about practical aspect of modem business I was
attached with Bangladesh Development Bank Ltd for the purpose of internship program. The
academic program of Accounting Department requires every MBA Student to undergo an
Internship Program. Keeping this view in consideration, students of MBA are advised to visit
Organizations/Institutions and discuss with management personnel for gathering practical
knowledge. After completion my study and field work. I would write up an internship report
under supervision of the Assistant Professor Rumana Ahmed, Department of Accounting &
Information Systems, University of Dhaka. I have made this report under his guidance and
supervision on the rehabilitation of sick industries financed by Bangladesh Development
Bank Ltd. Bangladesh Development Bank Ltd was setup for the purpose of industrialization
of our country after liberation. Our economic growth rate is very low. So for the economic
development, industrial growth is obligatory. More or less Bangladesh is an agricultural
country. But now a day Bangladesh is trying to shift this philosophy, and wanted to enter a
new dimension. This dimension is industrialization. To become an industrialized country,
Bangladesh Govt. set up many types of industries e.g. large-scale jute, textile, spinning and
packaging, non-metal products. etc. If these industries run well, then it will provide great
contribution to develop the country. But we can see that all these industries are not
contributing well. Even they are not profitable and became burden for the country in the form
of sick industry. Sick industry does not bring good result for the developing country like
Bangladesh.
1.2 Statement of the problem:
There are different industries in Bangladesh. Performance of the entire industrial sector is not
satisfactory. Many firms in different industries are becoming increasingly sick. Some of these
firms were liquidated or closed and some are on the verge of being closed. Why firms are
increasingly becoming sick and what action to be taken to ensure their survival and growth
are yet to be discovered. This study addresses the issues pertaining to the above-mentioned
problems.
1.3 Objectives of the study:
The main objectives of my studies are to find out how the overall operation of BSB is
performed and to examine the sick industries. To what extent it is successful to achieve its
goals and why many of its industries are become sick. The prime objectives of this report are
-
• To get an overall idea about the operation of BSB
• To examine the success status of loan recovery
• To know how they identify a sick firm.
• To identify the causes behind sickness of enterprises.
• To know what types of measurement are taken to rehabilitate the sick industries?
• To know which firms are rehabilitate and which are not.
• To observe the existing rules, regulation, theories and practices for BSB.
• To recommend some steps to overcome such problem
1.4 Rational of the study:
Industrialization is the main indicator to develop a country, so Govt. has established
Bangladesh Development Bank Ltd (BDBL) to dispense the loan and other technical facilities
among the entrepreneurs to develop industry. Since Bangladesh is a developing country, and
the present economic situation of Bangladesh is of open market in nature so in this situation
the specialized Bank like BSB can play necessary role toward the economic improvement.
The types of organizations in which BSB finance are - large-scale jute, textile spinning and
weaving, composite textile, cinema halls, water transport (both passenger and cargo),
computer software, fish processing, etc. Many of the sponsoring borrowers of BSB financed
projects have now become the most successful entrepreneurs of the country. In working with
the BSB I found that some of its financed industry is unable to operate in the market. These
industries are recognized as sick industry. So, at once I determined to find out the reasons of
sickness and how to overcome this. That's why I select this topic “Rehabilitation of Sick
Industry" financed by BSB.
1.5 Scope of the Study:
This report will mainly focus on the rehabilitation of sick industry financed by Bangladesh
Development Bank Ltd. This study covers the causes of sickness, different aspects of
sickness, habilitation policy; management of rehabilitation; rehabilitation between appraisal
success & failure of rehabilitation. My study is mainly related with practical oriented case, I
have studied on the Faridpur Textile Mills Limited, Khulna. Flow it went into sick and how it
rehabilitated.
1 .6 Methodology of the Study:
The area of my study has been encompassed the operation area of Bangladesh Shilpa
Bank, Dilkusha, Motijheel, Dhaka. The report is based on both primary and secondary data
and interviewing the mangers and officers if the bank, employees of the related parties have
provided the primary sources of information. Further more the secondary sources of
information are the 1ifferent annual reports, guide about activities of bank and financial
institution.
The sources of primary data are:
• Official records & documents of BSB.
• Face to face interview.
• Communication with other respective personnel of BSB.
The sources of secondary data are:
• Annual report & rehabilitation manual of BSB
• Project rehabilitation documents of Faridpur Textile Mills Limited
• Journals and relevant books.
• Website of BSB
1.7 Justification of the Study:
This study will have both practical and academic value. It will help to get a clear idea about
the rehabilitation procedure of sick industry of BSB. On the other hand, the findings of this
study will help to take appropriate actions and steps for the betterment of the existing
practice, which basically help the industrial development of the country.
1.8 Limitation of the Study:
This Internship Report is my first assignment outside our course curriculum in the practical
life. I, the students of “Department of Accounting & Information Systems”, just have
completed our formal education stage. After completing the institutional experience, Practical
performance in the formal stages become difficult. So in performing this report our lack of
practical knowledge greatly influenced in this performance. Besides above, other limitations
that were faced are:
1. Lack of availability of data
2. Many personnel of BSB were reluctant to provide useful information.
3. They are in government employee so have no eagerness to supply more because of extra
hardness.
4. Up-to-date information was not available.
5. Sufficient records, publications, facts and figures are not available.
6. For the reason of confidentiality, some useful information cannot be expressed in this
report.
7. Limitation of time.
8. No hypothesis has been drawn for this report.
CHAPTER TWO
OVERVIEW OF BAGLADESH SHILPA BANK
2.1 Introduction
2.2 Vision, Mission & Prime Coal
2.3 Institutional overview of BSB
2.4 Capital structure and sources of fund
2.5 Ownership of BSB
2.6 Management
2.7 Operational Activities of BSB
2.8 Steps Taken to Gear-up the Bank’s Activities
2.9 Bangladesh Development Bank Ltd: At a glance
2.1 Introduction:
The Bangladesh economy is confronted with the stiff competitive challenge in the context of
the free market economy and present globalization. The economic crisis is further aggravated
by the persistent hike of oil price and some other necessary importable items in the
international market as well as political unrest along with many other internal shocks.
Accommodating the challenges alongside for maintaining macro economic stabilization as
well as moderate CPI inflation and for achieving desired economic growth, various measures
are undertaken by the Government and the Central Bank like, cautious and restrained
Monetary Policy, reality based Fiscal Policy, strong participation of private sector in the
manufacturing sub-sector aided by continued growth of the Ready Made Garments industry
despite phasing out of global Multi Fibre Arrangement, highest growth in the remittance flow
has made possible to achieve a sustainable economic stabilization for the country. Industries
play a pivotal role in the economic development of every country. This is why
industrialization has been adopted as a vital instrument of economic development in many
developing countries. The former Industrial development Bank of Pakistan (IDBP) and The
Equity Participation Fund (EPF) both of which were established for the industrial
development of Pakistan were converted into a single institution named Bangladesh
Development Bank Ltd (BDBL). I3SB comes into existence on October 31, 1972 by the
promulgamation of BSB order 1972 under the president Order No. 129 of 1972 with a
mission of “accelerating the process of industrialization of the country by providing financial
assistance and equity support to the enthusiastic and skilled entrepreneurs “The BSB order,
1972 was amended subsequently by the parliament to provide more operational autonomy to
its management. It has been extending long and medium term loan facilities in local and
foreign currencies to industrialize projects, both new and Balancing, Modernization,
Replacement and Expansion (BMRE), in the private and public sectors.
The main objective of BSB is to provide finance both in local and foreign currencies for
establishment of new industrial projects as well as to Balancing, Modernization, Replacement
and Expansion (BMRE) of existing industrial units in Bangladesh both in private and public
sectors. It also provides other types of financial assistances like guarantees for credit/loans,
equity-support, underwriting of shares for other parties and working capital loans to the BSB
financed projects. BSB also provide banking business of limited scales.
2.2 Vision, Mission & Prime Goal:
Vision: To broaden the country’s industrial base for enhancing the contribution of industrial
sector to Gross Domestic Product (GDP) in congruence with the national policies.
Mission: Accelerating the pace of industrialization of the country by providing financial
assistance and equity support to the enthusiastic and skilled entrepreneur.
Prime Goal: Like the glorious past, Bangladesh Development Bank Ltd is committed to fulfill
customers’ needs and satisfaction as the trusted partner in industrial financing.
2.3 Institutional overview of BSB:
Established October 31, 1972
Organization Head office Dhaka
Division 5
Department 21
Zonal Office 3
Branch Office 15
Personnel 725
2.4 Capital structure and sources of fund:
Authorized capital : Tk 2000 million
Paid up capital : Tk 2000 million
The sources of bank’s fund are the government, Bangladesh Bank, Commercial Bank,
Local/Overseas financial institution and suppliers’ credit.
2.5 Ownership of BSB:
At least 51 percent of the Authorized capital of BSB be subscribed by Bangladesh
government and remaining 49 percent be subscribed by Bangladeshi nationals or by financial
institutions local or foreign. Presently, 100 percent ownership of the Bank belongs to the
government.
2.6 Management:
The overall policy formulation and the general direction of Banks operation vest on a board
of directors appointed by the government. The board of Directors consists of nine (9)
members including the chairman and the Managing director. Non- government shareholder
subscribing to the capital of the Bank shall eventually elect four (4) Directors from amongst
themselves. The Managing Director is the chief conducting the overall Banking business.
2.7 Operational activities of BSB:
Bangladesh Development Bank Ltd being the prime development financing institutional
continued its effort to make on effective contribution towards expansion of industrialization
process of the country. It emphasized on long term lending to the viable new projects having
comparative advantages, export prospects, forward and backward linkage and local
technology as well as raw materials based projects. Fop priority has been given for realization
of its loans towards augmenting and recycling of the invertible funds and maintaining
satisfactory loan portfolio for increasing profitability. With this end in view the Bank has
undertaken some realistic steps towards replacement. Rescheduling and liquidating of loan
accounts of sick / closed / stuck-up projects with waiver facilities where deemed appropriate.
2.8 Steps taken to Gear-up the bank’s activities:
To make the bank a vibrant one, a pragmatic business Program is now under implementation.
The main features of the plan are as under: -
• Gear-up recovery through setting up of pragmatic recovery targets.
• Expansion of new area of investment.
• Cleaning of loan ledger with exit facilities.
• All out efforts for deposit mobilization.
• Undertake need-based training Program including computer training to all officers &
develop a computerized data-base system and
• Full computerization of bank’s activities.
2.9 Bangladesh Development Bank Ltd : At a glance
2003-04 2004-05 2005-06 2006-07 2007-08
No. of
Projects
Loan application
received
51 83 96 51 47
Term loan sanctioned:
New 21 34 45 37 12
BMRE 3 1 2 - -
Additional 3 3 5 2 8
Total 27 38 52 39 20
Term loan disbursed 14 23 43 53 45
Working capital loan
sanctioned
5 3 9 15 3
Start of commercial
operation
4 7 12 8 27
Inclusion in loan
portfolio
6 14 23 31 14
Rephasement /
Rescheduling
17 23 16 13 16
Liquidation of loan 22 41 20 20 21
liablilities
Loan Portfolio 308 166 164 179 177
Write-off ledger - 281 283 278 321
No. of total projects 308 447 447 457 498
Million
Taka
Term Loan Sanctioned 989 1009 1311 1006 918
Term Loan Disbursed 297 144 485 534 384
Working Capital Loan
Sanctioned
19 14 232 105 3
Working Capital Loan
Disbursed
28 21 32 196 33
Loan Recovered 1124 1391 1159 1065 981
Rephased/Rescheduled 149 259 790 280 423
CHAPTER THREE
LITERATURE REVIEW
3. 0 LITERATURE REVIEW
Bangladesh Development Bank Ltd was established to stimulate industrialization in the
country. So, it financed in various types of industries. The industries on which it financed, all
are not a successful one. Some of them are fail to gain success and identified as a sick
industry. Rehabilitation Department is mainly deals with this sick industry. They find out the
causes of sickness of a project. Some time they reschedule loan according to the capabilities
of the project. Moreover more information and advices may be given so that the entrepreneur
may run the business more effectively; sufficient return may gain and contribute to the
economy. It basically needs to be satisfied about the overall viability of a project to be
financed. For this purpose, an objective assessment of the viability of the project is required
to be examined by BSB from various points of view. Project appraisal cover five different
aspects of a project: Management and Organization, Technical, Market, Economic, and
Financial. Although, the above five steps are followed in case of implement a project or to
finance a project, hut these five steps cannot always ensure that a project should be
successful. There are many odd or uncertain situation may happen, which can make a project
sick or unsuccessful. If the project is not rehabilitable, then send it to the Law Department
and finally sued against the project.
Sick industries mean the industries, which either become stuck-up during construction or
could not operate successfully after implementation. These projects could neither pay back
the bank’s dues nor make any contribution to the national economy. These projects were
identified as sick due to their inability to generate sufficient fund for debt servicing.
The Ministry of Finance and the Ministry of Industries co-operate to provide debt relief and
other financing assistance to bail out failing firms in a specific industry that has been
identified by the government as a “Sick Industry”. Assistance may include waiver of interest,
reduction in principal, repeated rescheduling of overdue loans, of combinations of these.
There are some specific criteria’s to identify a sick industry. They are
a) On the Basis of Cost Benefit Analysis
b) On the basis of Break Even Analysis
There are various reasons of sick firm. But to discuss it easily I classify it in two classes.
They are-
a) The reasons that are beyond die control of the project owner; and
h) The reasons that arc under control of the project owner
The above causes are further divided into seven (7) causes such as financial, marketing,
technological, administrative & managerial, economic, political and other causes of sickness.
Rehabilitation of a project means to reshape the existing industries or project that is diagnosis
a weak or sick project, so that it may operate successfully in future.
All sick industry is not rehabilitated because all sick industry has not all possibilities to
rehabilitate. It’s mainly depends on the nature of the sickness. The sick industry that is
probable to rehabilitate by providing and assisting some predefined criterion. The predefined
criterion are based particularly on
a. Management Perspective
b. Technological Perspective
c. Financial Perspective.
After considering a industry as sick, then the industry are taken into rehabilitation by aiding
additional support of those the sick industry that can recovers the additional investment then
it seems to he as rehabilitated industry otherwise not. in some extraordinary case they were
bound to take some terrible decision because of sonic political pressure.
Under recommendation of Govt’s special committee for waiver of interest the bank’s Board
of Director approved liquidation of 53 Bank-financed sick, problem rider and stuck-up
projects. The BSB also puts realistic efforts to rehabilitate its sick, problem-ridden and stuck-
up projects. In this perspective BSB has taken three-dimensional measures comprising of
debt relief, injection of additional funds, and direct management
The bank for the rehabilitation of the sick project took these three steps. The compensation
amount of Tk. 29.06 crores (in the form of bond) was obtained from Government against
waiver of interest. Under this scheme 23 projects liquidated their loan, 30 projects are LD1
and remaining 3 in LD2. It is mentionable that with a view to making such projects capable
of debt servicing through profitable operation, the bank tried to solve their problems through
a combination of measures including a financial package.
The bank also made a program of taking over management of the sick projects directly where
the above measures were not considered sufficient due to inefficient management/
mismanagement. So they created a department called “Sick Project Management
Department” for ensuring efficient management of such sick projects. The responsibility of
this department is to make such projects capable of debt servicing through profitable
operation. So the bank continued sanctioning of term loans during FY 2007-2008. This year
local currency loan of TK. 918 million has been sanctioned to 20 projects and short-term loan
(C.C. loan) of TK 3 million to 3 projects. Of the total sanctioned long-term loan, TK 538
million is for 12 new projects and an additional loan of TK. 380 million for 8 existing
projects. Under rehabilitation program BSB has taken so many measures to rehabilitate the
sick industries. I have elaborately discussed these measures by chart and table in the report.
The success and failure of rehabilitation is depends on how many projects the bank are
rehabilitated and amongst the rehabilitated projects from how many it would able to recollect
its money back. According to some records BSB has already rehabilitated some of 53
projects that are identified by the Govt. of Bangladesh. The lists of these projects are given in
details by table in the report.
CHAPTER FOUR
SICK INDUSTRY
4.1 Introduction
4.2 Method used to identify a Sick Industry
4.3 Precautions about Sick Industry
4.4 The Symptoms of Sick Industry
4.5 Sick Industry Classification
4.6 Causes of Sickness
4.6.1 Financial Problems/Shortage of Working Capital
4.6.2 Marketing Problem
4.6.3 Technological Problem
4.6.4 Administrative and Managerial Problem
4.6.5 Economic Problem
4.6.6 Political Problem
4.6.7 Other reasons of sickness
4.7 Sick Situation
4.8 Sick Industries
4.9 Impact of Sick Industry in Bangladesh or BSB
4.1 Introduction:
Sick industries mean the industries, which either become stuck-up during construction or
could not operate successfully after implementation. These projects could neither pay back
the bank’s dues nor make any contribution to the national economy. These projects were
identified as sick due to their inability to generate sufficient fund for debt servicing.
4.2 Method used to identify a Sick Industry:
There are some specific criteria’s to identify a sick industry. They are —
a) On the Basis of Cost Benefit Analysis:
For identifying a sick industry the following criteria may be considered by cost benefit
analysis. If the cost of the project is more/greater than the benefit then the industry is to be
considered as a sick industry. Some time the industry can’t recover the cost (labor, material)
for this reason the industry goes into loss.
b) On the basis of Break-Even Analysis:
An industry should produce up to break-even point because to recover the fixed cost or
overhead cost. If they can’t recover fixed cost then we can consider this industry as a sick
industry.
4.3 Precautions about Sick Industry:
Sick situation arises in an industry in some abnormal period. But if the rate of sickness is
overwhelming then it becomes a matter of fact. So before providing loan importance must be
given on evaluation. If the evaluation procedure is correct, sick industry situation may avoid
quite easily. So at pre-investment stage the following things must be considered-
Examine the project is done appropriately.
The project cost is calculated in a proper way.
The proper place is selected.
Defect machineries must not be purchased.
Ensure that skilled and experienced personnel are easily found.
Proper stapes are taken to protect uneven breakdown of electricity.
Ensure that proper people arc involved in the managing committee.
Ensure the financial capability of the initiator.
Ensure the procedure of makeup the preliminary cost and the doubtful loss.
Ensure the quality of the produced product.
Ensure the proper way to marketing the produced products.
Consider the change of test of customer.
Proper plan is taken to implement the project.
Steps are taken to avoid the potential conflict
4.4 The Symptoms of Sick Industry:
The symptoms of sick industry are as follows:
The initiator is unable to pay sufficient money at the implementation stage.
The delay of implementation increases the project cost. It also creates many problems
and the burden of loan interest is increased.
Lack of full production or frequent obstruction of industry.
The initiator is unable to pay the loan installment and other liability.
The failure in payment of loan installment in time increases the burden of loan.
Inability to submit the financial statement in time.
Increase the tendency of undertaking unfair means in preparing the papers of stock
materials.
Profit from investment is decrease gradually.
The project faces loss gradually.
The production level decreases gradually.
Taking loan from various sources at a high rate.
Applied for a large amount of loan.
Non-cooperating tendency with the loan providing bankers.
Lacking of perfection in the market.
4.5 Sick Industry Classification:
The Ministry of Finance and the Ministry of Industries co-operate to provide debt relief and
other financing assistance to bail out failing firms in a specific industry that has been
identified by the government as a “Sick Industry”. Assistance may include waiver of interest,
reduction in principal, repeated rescheduling of overdue loans, of combinations of these. A
‘Sick Industry” classification may be purchased with a suitable bribe to the appropriate
ministry, Ministries, the PMO, and the Standing committee of Parliament on Finance may be
lobbied and bribed to obtain such a classification. Billions of BDT of NCB loans are written
down using this technique.
4.6 Causes of Sickness:
Bangladesh Development Bank Ltd undertakes various projects by providing finance,
machinery and other aids, some projects are implemented and successful and some projects
are failed to attain the goal and these firms are called sick firm. There are various reasons of
sick firm. But to discuss it easily I classify it in two classes. They are-
The reasons that are beyond die control of the project owner; and
The reasons that arc under control of the project owner
The above causes are further divided into seven (7) causes. The causes are discussed below
according to their importance though all of the causes are important.
4.6.1 Financial Problems/Shortage of Working Capital:
The shortage of working capital is the most acute problem for majority of the sick industries.
Working capital is required to finance purchase of required raw materials and other short
term needs of a project after it is implemented. A survey shows that 17% of the projects
suffered due to shortage of capital. The problems, which lead an industry towards sick, are as
follows-
Measurement of investment outlay and cost of the project are not appropriate.
When the means of financing is not available.
When the project is not profitable.
When the production is not reached at the break-even point.
Loan application with insufficient amount of money that would not meet fixed and
operation cost.
When they can’t calculate appropriate risk level of sick.
Cash flow of the project is not available.
If actual cost of the project is more than the budgeted cost.
Shortage of working capital, i.e. if they do not manage the sufficient working capital.
If market interest rat increase, cost of working capital increase as a result the project
may become in sick.
Lack of operating capital.
Higher fixed cost. i.e. increase fixed cost as a result of increasing of the price of
machinery, land or any other fixed items.
When variable cost increase.
Does not ensure sufficient mortgage.
Improper inspection of Bank financed project.
Insufficient insurance facility.
Economic problem comes from the social cost benefit analyses.
4.6.2 Marketing problem:
Marketing problems are the next serious problem. This problem occurs due to a large number
of similar industries and the availability of the products in the secondary market by
unauthorized import of such products. A survey reveals that 24% of the projects are suffered
due to marketing problem. The marketing problems, which lead an industry towards sick, are
as follows:
The aggregate demand of the proposed project is not possible to till up.
When the market share of project is under low appraisal
When change the consumption trends in the past and present consumption level
If the changes occurred in the import and export policies
Change of customer behavior, intention, attitude, motivation, preferences,
requirements, distribution channel and marketing policy.
Administrative problems and legal constrains.
Introduction of new brand of product
Wrong forecasting about the market. Smuggling of substitute goods
If the raw material of the product is not purchase at appropriate time
If the market is not monitor properly
Improper market justification
Lack of market expansion and product diversification
Hugh competition in the market
If income level of the people in a society is decrease then demand of the product will
be decrease
Cheap price of the foreign product
Cost of production is high.
4.6.3 Technological Problem:
Machinery imbalance causing lower capacity utilization is the major technical problem of
many projects. Some are also suffered for faulty technical design. A survey reveals that 13%
of the projects are suffered due to technological problem. The technological problems, which
lead an industry towards sick, are as follows:
Whether the preliminary lest and studies are not appropriate.
Availability of raw materials, powers and other infra-structural facilities have not
been established.
The selected scale of operation is not optimal.
The production process chosen is not suitable.
The equipment and machine chosen are not appropriate.
Lack of modem technology, like incapable to use the computer and modem
machinery.
If the selection of machinery becomes faulty, it will not ensure the achievement of
objectives.
Wrongly or inappropriate selection of the machinery.
Lower capacity of the machine resulting price will be higher, ie. Production cost
high.
Inconsistency between the origin of raw materials arid the factory location,
production of products and final consumption adversely affect the business.
Lack of communication system.
Lack of infrastructure facilities.
In availability of supply of gas, electricity and water etc.
Selection of old and backdated technologies to be used in production.
Delay of machinery procurement & rapidly change in technological environment.
4.6.4 Administrative and Managerial Problem:
There are also some internal conflict between the worker and manager. A survey reveals that
22% of the projects are suffered due to administrative and managerial problem. The
administrative problems, which lead an industry towards sick, are as follows-
Weak management of the project.
Lack of efficiency of employment as well as management.
Conflict and also death of management partner’s.
Death of main entrepreneur of the project.
Insufficient appointment of employee
Unskilled human resources
Corruption and intentional misuse of organizational assets.
Lack of proper planning, organizing, controlling, administrating and monitoring.
4.6.5 Economic Problem:
The economic problems, which lead an industry towards sick, are as follows:
Economical problem comes from the social Cost Benefit Analysis.
It does not impact of the project on the distribution of the income in the society as
well as the level of saving and investment.
4.6.6 Political Problem:
The political problems, which lead an industry towards sick, are as follows:
Political pressure
Political instability which disrupt the production
Insufficient facilities provided by govt. to industrialist like tax rebate etc.
Political problem like unrest, hartal etc.
Political pressure to loan procurement
In appropriate action taken by govt. to protect smuggling
Political terrorism
4.6.7 Other reasons of sickness:
Except the above problems there are also some problems, which lead an industry towards
sick. A survey reveals that 10% of the projects are suffered due to other problem. They are as
follows:
Selection of in appropriate industrial unit which is not financial and logically viable in
concerned country
Delay of loan application
Internal delay of industries construction after loan sanction
If a portion of loan amount used for personal use
Delay of operation start
Over estimation of mortgage value
Delay of loan procurement and sanctioning process
Delay of documentation formalities in respect of loan
Causing of rehabilitation measures
Insufficient enforcement of law for recovery of loan
Inappropriate location of industries
Insufficient infrastructure facilities
Natural disaster that hampered production
Terrorism that hampered to establish an industry
Delay of implementation
4.7 Sick Situation:
Normally, BSB meets the long-term credit needs for implementation of its projects. BSB
charter provides for extending working capital to its financed projects only to a limited scale.
While sanctioning loans by BSB, provision is made for commercial banks to provide 70% of
the working capital needs. But in most cases, it is found that the project management either
can’t al all raise the required working capital from the commercial banks, or they can’t raise
required amount in due time. As a result these projects could not go into operation on
schedule time and they were unable to pay the interest and the principal amount. At last they
are treated as sick industry. There are 53 projects which are named as sick by the BSB.
4.8 Sick Industries:
In Bangladesh there are so many sick industries. The sick industry concept is not the newest
one. It is occurring from the pre-independence of Bangladesh and Bangladesh inherent some
sick industries from its birth. After independence this is also continuing. The exact figure of
sick industry is not identified. There 53 sick industries that are financed by BSB. Some of
them are stated below:
G.M.K.Textile Ltd. United Company J.K.K. lndustiy Ltd.Meraj Fabrics Ltd Malik Auto Rice Mill Mitaly Enterprise Pvt. Ltd.Nima Corporation Ltd. Au & Sons Ltd Shardar Textile Mills Ltd.Jahan Group of Printing &Packaging
Al-Amin ice Factory Riad Products Pvt. Ltd.
Al-Amin Printing &Packaging
Helal Engineering Pvt. Ltd. Grand Dhaka Hotel Pvt. Ltd
Hossain Electric Corn. Bancharampur Textile National Cold StoragePadma Tyer Retrading Industry Pvt. Ltd.
Hotel Konic Pvt. Ltd. Quick Canier Ltd.
Khan & KhanIndustry Pvt. Ltd.
North Bengal Silicate Industry Pvt. Ltd.
Uttaran Engineering Complex
Mohadevpur Auto Rice Mill Mocca Mills Ltd. D&S Auto Rice MillLakshani flour Mills Rangpur food Company Altaf Rice MillsNoor Cold Storage Rangpur Poly corn. Noor Rice MillsAllama Nails Allied Industry Pvt. Ltd.
Coxesbazer Aqua Resources Oriental Foundry
Jahanara Moulding & Engineering Workshop
Nakko Ice Mill Ltd. South East Enterprise
Brick Linker Ltd. Shovo Auto Rice Industry Diamond Industry Pvt. LtdTas Toys Pvt. Ltd. Toronodoy Water Ways