Regional Radiocommunication Conference Regional Radiocommunication Conference (RRC-06) (RRC-06) 15 May - 16 June 2006, Geneva, Switzerland 15 May - 16 June 2006, Geneva, Switzerland RRC-06 Planning Interface Miroslav Ćosić, Andrea Manara Radiocommunication Bureau
87
Embed
Regional Radiocommunication Conference (RRC-06) 15 May - 16 June 2006, Geneva, Switzerland
Regional Radiocommunication Conference (RRC-06) 15 May - 16 June 2006, Geneva, Switzerland. RRC-06 Planning Interface. Miroslav Ćosić, Andrea Manara Radiocommunication Bureau. Outline. Introduction Input data Service areas/Coverage analysis General analysis/Compatibility status - PowerPoint PPT Presentation
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Regional Radiocommunication Conference (RRC-06)Regional Radiocommunication Conference (RRC-06)15 May - 16 June 2006, Geneva, Switzerland15 May - 16 June 2006, Geneva, Switzerland
RRC-06 Planning Interface
Miroslav Ćosić, Andrea ManaraRadiocommunication Bureau
GUI application for Windows PCsRAD based on Microsoft .NET Formerly known as RRC06 Display 2Introduced during IPG1
(see document IPG-1/20-E)Ongoing improvements in features
and performance
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Installation Installation
Windows 2000 or XP Min. 1 GHz processor + 512 MB RAM Latest version available at:
http://www.itu.int/ITU-R/conferences/rrc/rrc-04/intersession/progs/RRC_output_display/rrc_display.zipor from the PCs in the CICG Cyber-Café (level -1)
No need for administrator privileges (only one time for .NET framework install)
In case of installation (or any other) problem, contact [email protected]
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Release Notes and HelpRelease Notes and Help
Release notes are in 5 languageshttp://www.itu.int/ITU-R/conferences/rrc/rrc-04/intersession/progs/RRC_output_display/index.htmlhttp://www.itu.int/ITU-R/conferences/rrc/rrc-04/intersession/progs/RRC_output_display/index-fr.htmlhttp://www.itu.int/ITU-R/conferences/rrc/rrc-04/intersession/progs/RRC_output_display/index-es.htmlhttp://www.itu.int/ITU-R/conferences/rrc/rrc-04/intersession/progs/RRC_output_display/index_ar.htmlhttp://www.itu.int/ITU-R/conferences/rrc/rrc-04/intersession/progs/RRC_output_display/index-ru.html
or from the Help->Release Notes menu item in the application itself
Feature set evolves faster than the help can be updated and translated
Help is available in the main Help menu and in the PE and AD tools
Exporting to HTML, CSV or ExcelExporting input data subset to MDBPrinting of graphics Per-table column positions, widths
and visible/hidden are rememberedPer-table sorting by up to 5 criteria
can be saved as preferences
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Input DataInput Data
– Viewing notices from MDB file– Viewing notices from online database– Subsets of input data• Digital requirements• Administrative declarations (if available)• Analogue TV broadcasting assignments• Other primary services assignments
– Allotment area displayed on map
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Selection of CNG Geo AreasSelection of CNG Geo Areas
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Types of RequirementsTypes of Requirements
There are 4 main types of standalone and “linked” requirements – Standalone allotment (DT2 or DS2)– Standalone assignment (DT1 or DS1)– Single Frequency Network (SFN)– Assignment linked to an allotment
Starting points:– Input data summary table or SFN parts list
(new menu item available on right-click)– Compatibility status– Channel distribution statistics (if synthesis
results are available)– General analysis per requirement
General Analysis display for a particular requirement under investigation
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Compatibility StatusCompatibility Status
Lists all incompatibilities within one administration or between two adms
5 types of incompatibility:– Digital-to-Digital (d2d)– Analogue TV-to-Digital (a2d)– Digital-to-Analogue TV (d2a)– Other Services-to-Digital (o2d)– Digital-to-Other Services (d2o)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Compatibility Status - UsabilityCompatibility Status - Usability
Sorting and hiding columns may be used to better manage the amount of data displayed
Right-click to access input data details or general analysis results
Convenient way to generate additional admin declarations
Draft Plan Case 1: > 6,7 M incompatibilities
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Compatibility Status - HintsCompatibility Status - Hints
To get the full status of Case 1 self- incompatibilities, do the 5 queries, for each band (i.e. total 10 queries)
To get the status of compatibility with another adm, do the 10 queries for B to A (i.e. administration A is submitting/affected) and then another 10 for A to B (i.e. 20 in all)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Channel Distribution StatisticsChannel Distribution Statistics
Quick access to lists of requirements which did not get a channel assigned
Future improvements– Distinguish between requirements with
no assigned channel and those with no available channel, in a new column
– Improve support for different types of linked sets of requirements
RRC-06 15 May – 16 June 2006 Geneva Switzerland
General AnalysisGeneral Analysis
All direct incompatibilities for a requirement at a glance
Easy access to input data and general analysis results of others
Improved support for linked setsConvenient way to generate new
Digital-to-Digital admin declarations for one requirement (other types TBD)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
General Analysis – DT2/DS2General Analysis – DT2/DS2
RRC-06 15 May – 16 June 2006 Geneva Switzerland
General Analysis – DT1/DS1General Analysis – DT1/DS1
RRC-06 15 May – 16 June 2006 Geneva Switzerland
GA – DT2/DS2 Part of SFN DT2/SFN DS2GA – DT2/DS2 Part of SFN DT2/SFN DS2
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Parts of SFN DT2/SFN DS2Parts of SFN DT2/SFN DS2
RRC-06 15 May – 16 June 2006 Geneva Switzerland
GA – DT1/DS1 Part of SFN DT1/SFN DS1GA – DT1/DS1 Part of SFN DT1/SFN DS1
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Parts of SFN DT1/SFN DS1Parts of SFN DT1/SFN DS1
RRC-06 15 May – 16 June 2006 Geneva Switzerland
GA – DT2/DS2 Part of SFN DT2+DT1/SFN DS2+DS1GA – DT2/DS2 Part of SFN DT2+DT1/SFN DS2+DS1
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Parts of SFN DT2+DT1/SFN DS2+DS1Parts of SFN DT2+DT1/SFN DS2+DS1
RRC-06 15 May – 16 June 2006 Geneva Switzerland
GA – DT1/DS1 Part of SFN DT2+DT1/SFN DS2+DS1GA – DT1/DS1 Part of SFN DT2+DT1/SFN DS2+DS1
RRC-06 15 May – 16 June 2006 Geneva Switzerland
GA – DT2/DS2 Part of DT2+DT1/DS2+DS1GA – DT2/DS2 Part of DT2+DT1/DS2+DS1
RRC-06 15 May – 16 June 2006 Geneva Switzerland
GA – DT1/DS1 Part of DT2+DT1/DS2+DS1GA – DT1/DS1 Part of DT2+DT1/DS2+DS1
RRC-06 15 May – 16 June 2006 Geneva Switzerland
GA – Detailed AnalysisGA – Detailed Analysis
For any incompatibility, additional data can be calculated in real-time by right-clicking on “Detailed analysis”
For d2a details, the directory with the pre-calculated analogue reference situation binary file must be given (if not detected in the same directory as the results database)
All incompatibilities are presented in all cases (1, 2, 3 and 4), even if they have administrative declarations
Sorting may be used to focus on those without declarations
Sorting on “descending” values of margin and CNFS will place rows with missing values first, since these are cases of service area overlaps and “Tx inside”
RRC-06 15 May – 16 June 2006 Geneva Switzerland
General Analysis – More HintsGeneral Analysis – More Hints
In cases 1/2/3, some d2d results shown have no adverse effect, since there are no common or overlapping available channels
Draft Plan Case 1: 2,8 M (or 52 %) d2d incompatibilities with no effect because of less available spectrum
RRC-06 15 May – 16 June 2006 Geneva Switzerland
GA Case 1– No Common Av. Ch.GA Case 1– No Common Av. Ch.
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Synthesis ResultsSynthesis Results
Channel distribution statistics Coverage analysis – option to limit the
display to assigned channels Service areas – option to limit the display
to assigned channels Future work: right-click menu must show
the available channels/blocks and the assigned channel/block in addition to the acceptable channels/blocks
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Planning Exercise ToolPlanning Exercise Tool
GUI for EBU TD planning softwareSupports 5 types of analysis and
(optional) synthesisSupports new format of admin
declarations (CR/254 addendum 1)If using admin declarations, a new
window will show which declarations have been validated/pair-checked
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – Input DataPE Tool – Input Data
Input data can come from input data or results MDB files from BR web site
RRC_Requirements must be used to edit/merge digital requirements data
For d2a analysis, it is possible to use pre-calculated analogue TV reference situation binary files provided by BR
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – Admin DeclarationsPE Tool – Admin Declarations
Administrative declarations can be copied from a results database, or taken from one or more CSV files, or both (a CSV file must be for one adm)
For testing, the PE tool can consider all declarations to be pair-checked, or it can enforce strict pair-checking
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool d2d Example - InputPE Tool d2d Example - Input
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool d2d Example – Input (2)PE Tool d2d Example – Input (2)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool d2d Example – Input (3)PE Tool d2d Example – Input (3)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool d2d Example – Input (4)PE Tool d2d Example – Input (4)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example – Step 1PE Tool – d2d Example – Step 1
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example – Step 2PE Tool – d2d Example – Step 2
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – Review ADsPE Tool – Review ADs
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example – RunPE Tool – d2d Example – Run
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – Digital Reqs ValidationPE Tool – Digital Reqs Validation
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d – Must Include AnaloguePE Tool – d2d – Must Include Analogue
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example – Step 2 (2)PE Tool – d2d Example – Step 2 (2)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example – Run (2)PE Tool – d2d Example – Run (2)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – Analogue ValidationPE Tool – Analogue Validation
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example – OKPE Tool – d2d Example – OK
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE - Compatibility Status PE - Compatibility Status
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE - Compatibility Status (2)PE - Compatibility Status (2)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool - HintsPE Tool - Hints
For the next PE, the previous small results MDB can now serve as the input MDB
After selecting an admin declarations CSV file, make sure to click on “Add file”
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example 2 PE Tool – d2d Example 2
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example 2 (2)PE Tool – d2d Example 2 (2)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example 2 (3)PE Tool – d2d Example 2 (3)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example 2 (4)PE Tool – d2d Example 2 (4)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example 2 (5)PE Tool – d2d Example 2 (5)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example 2 (6)PE Tool – d2d Example 2 (6)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example 2 (7)PE Tool – d2d Example 2 (7)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example 2 (8)PE Tool – d2d Example 2 (8)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example 2 (9)PE Tool – d2d Example 2 (9)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example 2 (10)PE Tool – d2d Example 2 (10)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example 2 (11)PE Tool – d2d Example 2 (11)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example 2 (12)PE Tool – d2d Example 2 (12)
RRC-06 15 May – 16 June 2006 Geneva Switzerland
PE Tool – d2d Example 2 (13)PE Tool – d2d Example 2 (13)
Supports new format of admin declarations (CR/254 addendum 1)
Supports editing comments in placeSupports opening a file in the old
format and saving in the new formatCan ensure creation of all possible
1-to-1 declarations among parts of sets of linked requirements
RRC-06 15 May – 16 June 2006 Geneva Switzerland
AD Tool – AD RulesAD Tool – AD Rules
File must have only one administration code on the left
Conditional self-declarations are saved to file as un-conditional
Declarations for analogue assignments only created for those assignments included in the planning (BC6=TRUE)
Can ensure creation of all possible declarations among 2 sets of linked requirements, if requested
RRC-06 15 May – 16 June 2006 Geneva Switzerland
AD Tool – AD Rules (cont’d)AD Tool – AD Rules (cont’d)
Self-declarations are saved to file only in one direction, the other direction being considered as a duplicate
Creating new duplicate declarations updates the intent (ADD/MOD/SUPP), the conditional flag, and the remark for the existing declaration
RRC-06 15 May – 16 June 2006 Geneva Switzerland
AD Tool – AD Rules for 1-to-1AD Tool – AD Rules for 1-to-1
D2D/O2D/D2O must have common or overlapping bandwidths
A2D/D2A must have adjacent or common/overlapping bandwidths
Self-declarations within a linked set are not created
A2D/D2A declarations not created when D is a conversion from A
RRC-06 15 May – 16 June 2006 Geneva Switzerland
AD Tool - HintsAD Tool - Hints
The AD tool can be used to quickly generate many syntactically correct declarations, but that doesn’t mean it should be used that way
Exporting reciprocal declarations, importing (reciprocal) declarations are time-saving features found in the File menu
RRC-06 15 May – 16 June 2006 Geneva Switzerland
Future ImprovementsFuture Improvements
Display of each requirement’s worst MIG according to the RSD (%) criteria
Display of MIGs for an administration– Global MIGs with admin declarations– Global MIGs without self-declarations– Internal MIGs with admin declarations– Internal MIGs without self-declarations