Refrigeration brochure 3

Refrigerant Leak Detection System Solutions

Project Management:

• Every project is fully supported by a dedicated project manager to provide one point of contact throughout every phase through to completion and thereafter

Design:

• In-house design team provides initial drawings following full site survey

• Consultation & troubleshooting to meet specific design/application requirements

Build:

• All systems are configured to specified requirements by factory trained engineers

• Factory Acceptance Tests (FAT’s) are conducted at our in-house facilities with you prior to installation, with all relevant inspection certification issued

Service & Support:

Service & support is integral to the a1-cbiss offering. With one of the largest service networks in the industry and nationwide coverage, our dedicated team of service engineers provide service, repair and maintenance on all equipment supplied.

1

Company OverviewWe have over 20 years experience,specialising in the design, manufacture and installation of custom built gas monitoring systems.

All systems are supported by our comprehensive nationwide service and support team.

Reduce Your Carbon Footprint

2

Leak Detection Overview

There are different reasons why gas leak detection is needed and an endless list of benefits from having a solution in place. Here are some of the key reasons:

• Compliance with relevant legislation - EN378 & F-Gas

• Maximise energy efficiency of refrigerant system. 15% gas loss = 100% increase in energy consumption

• Reduced service costs (cost of replacement gas and the service call)

• Minimise risk of stock/product loss

• Personnel and customer protection

• Supports commitment to reducing carbon footprint

3

Applications including: Supermarkets • Refrigerated Storage/Distribution Centres • Chiller Plant Rooms Air Conditioning • Hotels • Marine • Food Manufacture & ProcessingARMSCurrently operational on over 150 sites across Europe, the future-proof, legislation driven, Automatic Refrigerant Monitoring System 2 (ARMS) is a proven fixed gas leak detection system for commercial and industrial applications.

Benefits:

• Simultaneous multi-gas IR detection eradicates need for multiple systems and supports site changes

• Unique detection of up to 32 individual points to enable accurate identification of leak location

• Flexible system communication and intuitive touch screen user interface

• Bypass pump feature to minimise system cycle time and response time

• Designed, manufactured and fully supported in the UK

• Listed on the Energy Technology List to benefit from 100% first year Enhanced Capital Allowances

Gases:

• HFC/HCFC’s • CO2 • NH3 Hydrocarbons • CH4

4

RMS8000

The a1-cbiss RMS8000 offers a robust, easy to use, cost effective approach to providing an effective refrigerant gas monitoring system. The RMS8000 is a wall mounted monitoring system used to monitor concentrations of carbon dioxide, ammonia, HCFC/ HFC or combustible gases in refrigerant applications.

Benefits:

• Ideally suited to small/medium sized applications requiring up to 8 points of detection

• Low cost solution for sites requiring minimal number of monitoring points

• Compact design and easy to operate, reduced installation and training

• 4-digit, 7-segment display while another 2-character alphanumeric display indicates instrument status

• Sensors operational from -18ºC to +60ºC allows usage in a broad range of applications

Gases:

• HFC/HCFC’s • CO2 • NH3 • Hydrocarbons • CH4

Inficon Handheld Leak DetectorsThe Inficon TEK-Mate & D-TEK CO2 offer industry proven solutions for handheld refrigerant leak detection. Both detectors have developed a strong reputation for high reliability and sensitivity in the field.

Benefits:

• The D-TEK CO2 is the only handheld refrigerant leak detector designed specifically for CO2

• 2 year warranty as standard, for increased peace of mind

• Highly sensitive with background zero function to minimise false alarms

• Built to last - Rugged design - Reduced operational failures and cost of ownership

• The TEK-Mate offers patented heated diode sensor technology

Gases:

• HFC/HCFC’s - TEK-Mate

• CO2 - D-TEK CO2

Applications including: Supermarkets • Refrigerated Storage/Distribution Centres • Chiller Plant Rooms Air Conditioning • Hotels • Marine • Food Manufacture & Processing

5

Our Service Philosophy

Service & support is integral to the a1-cbiss offering. With one of the largest service networks in the industry and nationwide coverage, our dedicated team of service engineers provide service, repair & maintenance on all equipment supplied. With a comprehensive service and support offering, there are a number of options available to meet site specific, legislative, or budgetary requirements. We offer peace of mind that equipment is covered for all eventualities, with service costs remaining fixed for the contract period.

Typical Service Contract Comprises:

• 1 scheduled service and calibration visit per year in compliance with F-Gas Regulation

• All labour and consumable parts inclusive

• Issue of full service documentation

• Standard 1 year warranty (option available to extend warranty)

• Call-out response times tailored to meet specific site requirements

• 24/7 regional service cover with locations in Merseyside, Surrey and Glasgow

• Comprehensive stockists of critical spare parts and consumables

• Fully factory trained and time served engineers (with average length of service greater than 5 years)

The a1-cbiss philosophy dictates that quality should continue far beyond the production phase

All systems are supported by our dedicated service department to provide repair, calibration, preventative maintenance, software support and remote diagnostics.

All of our proposals offer tried and tested technology with proven reliability. All systems are fully supported in the UK by industry specialist engineers, giving peace of mind that your instrument is receiving the most comprehensive maintenance programme available.

6

Client Testimonials

“”

”””

“““

We are extremely pleased with the a1-cbiss gas leak detection system. It is both compact and easy to install with a choice of 16, 24 or 32 sampling channels. It is extremely versatile with its ability to sample two different gases simultaneously from one sensor, utilising a vast list of refrigerant gas types. This makes it unique within its competition base.

The door mounted user screen is clear and easy to configure, with step-by-step instructions to follow. Another unique feature of the a1-cbiss gas leak detection system is the ability to configure each of the 16 volt-free relays to be triggered from any single or multiple sampling channels.

But the great advantage this system has over all of its rivals is the ability to connect via a local IP network to an RDM Data Manager (widely used world-wide for monitoring and controlling refrigeration systems), giving the user/s the ability to configure it, monitor and report the complete gas detection system from both the RDM Data Manager and remotely via the internet.

Colin Brown Head of Controls, NCS (Cumbria) Ltd

The response and approach we have received from Karl and the team at a1-cbiss has been extremely positive and showed real professionalism. As a result, we look forward to strengthening our relationship in the months ahead.

Daniel Byrne Active Control Engineer, Marks & Spencer

Oaksmere has developed a strong relationship with a1-cbiss over recent years and worked closely to provide a flexible, robust and extremely reliable refrigerant leak detection solution for our mutual clients. The ARMS system offers flexibility in terms of multi-gas measurement (Combined CO2 & HFC’s or Hydrocarbons), integration with control/management systems and this, combined with excellent system support, ensures that a1-cbiss can be trusted to deliver an efficient/effective leak detection solution for their clients.

Gerrard Elliott Electrical Design Engineer, Oaksmere

We have developed a strong rapport with Karl over the past 3 years to ensure a professional relationship. I have found the a1-cbiss panel to be practical and easy to use thanks to onboard software and the touch screen interface. The service back up team has been excellent and fully supportive when servicing the refrigerant monitoring systems.

Bruce McIntosh Director, Technical Retail Services Ltd

Contact Us:

Karl RobertsRefrigerant Leak Detection Sales Manager

Mobile: 07899 021144

Email: [email protected]

Office Details

a1-cbiss Ltd

11 Ark Royal Way

Lairdside Technology Park

Tranmere

Wirral

CH41 9HT

Tel: 0151 666 8300

Fax: 0151 666 8329

Buy online: www.shop.a1-cbiss.com