274 REFERENCES 1. Adibi – Sedeh, A.H., Vaziri, M., Pednekar, V., Madhavan, V. and Ivester, R. “Investigation of the effect of using different material models on the finite element simulations of machining”, 8 th CIRP international workshop on modelling of machining operations, Chemnitz, Germany, 2005. 2. Adibi – Sedeh, A.H., Madhavan, V. and Bahr, B. “Extension of Oxley’s Analysis of machining to use different material models”, Transactions of ASME, Vol. 125, pp. 656-666, 2003. 3. Al Bawaneh, M. “Determination of material constitutive models using orthogonal machining tests”, PhD thesis, Wichita State University, 2007. 4. Altan, T. “Comparison of results between FEM predictions and experiments”, ERC/NSM report, Ohio State University, 2002. 5. Altan, T. and Eugene, Y. “Modelling of metal cutting using FEM”, CIRP Workshop on FEM modelling and Machining operations, France, 2003. 6. Altintas, Y and Budak, E. “Analytical Prediction of Stability Lobes in Milling”, CIRP Annals-Manufacturing Technology, Vol. 44, pp. 357-362, 1995. 7. Anurag, S. and Guo, Y.B. “A modified micro mechanical approach to determine flow stress of work materials experiencing complex deformation histories in manufacturing processes”, International Journal of Mechanical Sciences, Vol. 49, pp. 909-918, 2007. 8. Armarego, E.J.A. and Brown, R.H “The Machining of metals”, Prentice Hall, Englehood cliffs, NJ, 1969. 9. Arrazola, P.J., Ugarte, D. and Dominguez, X. “A new approach for the friction identification during machining through the use of finite element modeling”, International Journal of Machine Tools and Manufacture, Vol. 48, pp.173-183, 2008.
23
Embed
REFERENCES - Information and Library Network Centreshodhganga.inflibnet.ac.in/bitstream/10603/11707/13/13_references.pdf · minimum energy principle for the cutting process in theory
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
274
REFERENCES
1. Adibi – Sedeh, A.H., Vaziri, M., Pednekar, V., Madhavan, V. and
Ivester, R. “Investigation of the effect of using different material
models on the finite element simulations of machining”, 8th
CIRP
international workshop on modelling of machining operations,
Chemnitz, Germany, 2005.
2. Adibi – Sedeh, A.H., Madhavan, V. and Bahr, B. “Extension of
Oxley’s Analysis of machining to use different material models”,
Transactions of ASME, Vol. 125, pp. 656-666, 2003.
3. Al Bawaneh, M. “Determination of material constitutive models using
orthogonal machining tests”, PhD thesis, Wichita State University,
2007.
4. Altan, T. “Comparison of results between FEM predictions and
experiments”, ERC/NSM report, Ohio State University, 2002.
5. Altan, T. and Eugene, Y. “Modelling of metal cutting using FEM”,
CIRP Workshop on FEM modelling and Machining operations,
France, 2003.
6. Altintas, Y and Budak, E. “Analytical Prediction of Stability Lobes
in Milling”, CIRP Annals-Manufacturing Technology, Vol. 44,
pp. 357-362, 1995.
7. Anurag, S. and Guo, Y.B. “A modified micro mechanical approach to
determine flow stress of work materials experiencing complex
deformation histories in manufacturing processes”, International
Journal of Mechanical Sciences, Vol. 49, pp. 909-918, 2007.
8. Armarego, E.J.A. and Brown, R.H “The Machining of metals”,
Prentice Hall, Englehood cliffs, NJ, 1969.
9. Arrazola, P.J., Ugarte, D. and Dominguez, X. “A new approach for the
friction identification during machining through the use of finite
element modeling”, International Journal of Machine Tools and
Manufacture, Vol. 48, pp.173-183, 2008.
275
10. Arrazola, P.J. and Ozel, T. “Investigations on the effects of friction
modeling in finite element simulation of machining”, International
Journal of Mechanical Sciences, Vol. 52, pp. 31- 42, 2010.
11. Astakhov, V.P. and Shvets, S. “The assessment of plastic deformation
in metal cutting”, Journal of Materials Processing Technology,
Vol. 146, pp.193-202, 2004.
12. Baker, M. “Finite element investigation of the flow stress dependence
of chip formation”, Journal of Materials Processing Technology,
Vol. 167, pp.1-13, 2005.
13. Baker, M. “Finite element simulation of high-speed cutting forces”,
Journal of Materials Processing Technology, Vol. 176, pp. 117-126,
2006.
14. Baker, M., Rosler, J. and Siemers, C. “Finite element simulation of
segmented chip formation of Ti6Al4V”, Journal of Manufacturing
Science and Engineering, Vol. 124, pp. 485-488, 2002.
15. Barge, M., Hamdi, H., Rech, J. and Bergheau, J.M. “Numerical
modelling of orthogonal cutting: influence of numerical parameters”,
Journal of Materials Processing Technology, Vol. 164-165,
pp.1148-1153, 2005.
16. Bariani, P.F., Dal Negro, T. and Bruschi, S. “Testing and modelling of
material response to deformation in bulk metal forming”, CIRP
Annals-Manufacturing Technology, Vol. 53, pp. 573-595, 2004.
17. Batra, R.C. “Steady State Penetration of Thermoviscoplastic Targets”,
Computational Mechanics, Vol. 3, pp. 1-12, 1988.
18. Benson, D.J. and Okazawa, S. “Contact in a multi-material Eulerian
finite element formulation”, Computational Methods in Applied
Mechanical Engineering, Vol.193, pp. 4277-4298, 2004.
19. Bodner, S. R. and Partom, Y. “Constitutive Equations for Elastic-
Viscoplastic Strain-Hardening Materials”, ASME Journal of Applied
Mechanics, Vol. 56, pp. 385-389, 1975.
20. Bonnet, C., Valiorgue, F., Rech, J. and Hamdi, H. “Improvement of the
numerical modeling in orthogonal dry cutting of an AISI 316 L
stainless steel by the introduction of a new friction model”, CIRP
Journal of Manufacturing Science and Technology, Vol. 1, pp. 114-118,
2008.
276
21. Boothroyd, G. and Knight, W.A. “Fundamentals of machining and
machine tools”, Third edition, CRC Press, 2006.
22. Borouchaki, H., Cherouat, A., Laug, P. and Saanouni, K. “Adaptive
remeshing for ductile fracture prediction in metal forming”, Comptes
Rendus Mec, Vol. 330, pp.709 -716, 2002.
23. Brozzo, P., De Luca, B. and Rendina, R. “A new method for the
prediction of formability limit of metal sheet”, In: Veerman C (ed)
Proceedings of the 7th Biennial Conference of the International Deep
Drawing Research Group, IDDRG, pp. 3.1-3.5, 1972.
24. Budak, E., Altintas, Y. and Armarego, E.J.A. “Prediction of milling
force coefficients from orthogonal cutting data”, Transactions of
ASME Journal of Manufacturing Science Engineering, Vol. 118,
pp. 216-224, 1996.
25. Burns, T.J. and Davies, M.A “Non linear dynamics model for
chip segmentation in machining”, Physical review letters, Vol. 79,
pp. 447-450, 1997.
26. Calamaz, M., Coupard, D. and Girot, F. “A new material model for 2D
numerical simulation of serrated chip formation when machining
titanium alloy Ti-6Al-4V”, International Journal of Machine Tools and
Manufacture, Vol. 48, pp. 275-288, 2008.
27. Carroll, J. T. and Strenkowski, J.S “Finite element models of
orthogonal cutting with application to single point diamond turning”,
International Journal of Mechanical Sciences, Vol. 30, pp. 899-920,
1988.
28. Ceretti, E., Fallbohmer, P., Wu, W.T and Altan, T. “Application of 2D
FEM to chip formation in orthogonal cutting”, Journal of Materials
Processing Technology, Vol. 59, pp. 169-180, 1996.
29. Ceretti, E., Lucchi, M and Altan, T. “FEM simulation of orthogonal
cutting: serrated chip formation”, Journal of Materials Processing
Technology, Vol. 95, pp. 17-26, 1999.
30. Chandrasekaran, H., Saoubi, R.M. and Chazal, H. “Modelling of
material flow stress in chip formation process from orthogonal milling
and split hopkinson bar tests”, Machining Science and Technology,
Vol. 9, pp. 131-145, 2005.
277
31. Chandrasekharan, V., Kapoor, S.G. and DeVor, R.E. “A Mechanistic
approach to predicting the cutting forces in drilling; with application to
fiber reinforced composite materials”, ASME Journal of Engineering
for Industry, Vol. 117, pp. 559-570, 1995.
32. Childs, T.H.C. “Numerical experiments on the influence of material
and other variables on plane strain continuous chip formation in metal
machining”, International Journal of Mechanical Sciences, Vol. 48,
pp. 307-322, 2006.
33. Childs, T.H.C. “Material Property Requirements for Modelling Metal
Machining”, Journal of Physics IV France 7, pp. 21-36, 1997.
34. Childs, T.H.C. and Rahmad, R. “Modelling orthogonal machining of
carbon steels Part II: Comparisons with experiments”, International
Journal of Mechanical Sciences, Vol. 51, pp. 465-472, 2009.
35. Childs, T.H.C., Maekawa, K., Obikawa, T. and Yamane, Y. “Metal
machining: theory and applications”, Arnold, Paris, 2000.
36. Childs, T.H.C. and Maekawa, K. “Computer-aided simulation and
experimental studies of chip flow and tool wear in the turning of low
alloy steels by cemented carbide tools”, Wear, Vol. 139, pp. 235-250,
1990.
37. Childs, T.H.C. “Material property needs in modeling metal machining”
Proceedings of the CIRP International Workshop on Modeling of
Machining Operations, Atlanta, GA, pp. 193-202, 1998.
38. Chineseta, F., Filice, L., Micari, F., Rizzuti, S. and Umbrello, D.
“Assessment of material models through simple machining tests”,
International Journal of Material Forming, Vol. 1, pp. 507-510, 2008.
39. Cockroft, M.G and Latham, D.J “Ductility and workability of metals”,
Journal of Institute of Metals, Vol. 96, pp. 33-39, 1968.
96. Koenigsberger, F. and Sabberwal, A.J.P. “An investigation into the
cutting force pulsations during milling operations”, International
Journal of M.T.D.R., Vol. 1, pp.15-33, 1961.
97. Komanduri, R. and Hou, Z.B. “Thermal modelling of the metal cutting
process Part I: Temperature rise distribution due to shear plane heat
source”, International Journal of Mechanical Sciences, Vol. 42,
pp.1715-1752, 2001 a.
98. Komanduri, R. and Hou, Z.B. “Thermal modelling of the metal cutting
process Part II: Temperature rise distribution due to frictional heat
source at the tool chip interface”, International Journal of Mechanical
Sciences, Vol. 43, pp.57-88, 2001 b.
99. Komanduri, R. and Hou, Z.B “Thermal modelling of the metal cutting
process Part III: Temperature rise distribution due to the combined
effects of shear plane heat source and tool chip interface frictional
heat source”, International Journal of Mechanical Sciences, Vol. 43,
pp. 89-107, 2001 c.
100. Komvopoulos, K. and Erpenbeck, S.A. “Finite element modeling of
orthogonal metal cutting”, Journal of Engineering Industry,
Transactions of ASME, Vol. 113, pp. 253-267, 1991.
284
101. Kopac, J., Korosec, K. and Kuzman, K. “Determination of flow stressproperties of machinable materials with help of simple compressionand orthogonal machining test”, International Journal of MachineTools and Manufacture, Vol. 41, pp.1275-1282, 2001.
102. Kumar, S., Fallbohmer, P. and Altan, T. “Computer simulation oforthogonal cutting process: determination of material properties andeffects of tool geometry on chip flow”, Technical Paper NAMRI/SMEXXV, Vol.177, pp.1-6, 1997.
103. Lalwani, D.I., Mehta, N.K. and Jain, P.K. “Extension of Oxley’spredictive machining theory for Johnson and Cook flow stress model”,Journal of Materials Processing Technology, Vol. 209, pp.5305-5312,2009.
104. Lee, E.H. and Shaffer, B.W. “The theory of plasticity applied toa problem of machining’ Journal of Applied Mechanics, Vol. 18,
pp.405-413, 1961.
105. Lee, P. and Altintas, Y. “Prediction of ball-end milling forces fromorthogonal cutting data”, International Journal of Machine Tools andManufacture, Vol. 36, pp.1059-1072,1996.
106. Lee, W.S. and Lin, C.F. “High temperature deformation behaviour ofTi6Al4V alloy evaluated by high strain rate compression tests”,Journal of Materials Processing Technology, Vol.75, pp.127-136,1998.
107. Lei, S., Shin, Y.C and Incropera, F.P. “Thermo-mechanical modelingof orthogonal machining process by finite element analysis”,International Journal of Machine Tools and Manufacture, Vol. 39,pp.731-750, 1999.
108. Lei, S., Shin, Y.C., and Incropera, F.P. “Material ConstitutiveModeling under High strain rates and Temperatures throughOrthogonal Machining Tests”, ASME Journal of ManufacturingScience Engineering, Vol.121, pp. 577-585, 1999.
109. Lemaitre, J. “A continuous damage mechanics model for ductilefracture”, Journal of Engineering Materials Technology, Transactionsof ASME, Vol.107, pp.83-89, 1991.
110. Lesuer, D.R. “Experimental investigations of material models for Ti-6Al-4V titanium and 2024-T3 aluminum”, In: Final Report,DOT/FAA/AR-00/25, US Department of Transportation, FederalAviation Administration, 2000.
285
111. Li, K., Gao, X.L. and Sutherland, J.W. “Finite element simulation of
the orthogonal metal cutting process for qualitative understanding of
the effects of crater wear on the chip formation process”, Journal of
149. Osakada, K., Watadani, A. and Sekiguchi, H. “Ductile fracture
of carbon steel under cold metal forming conditions”, Bull JSME,
Vol. 20, pp.1557-1565, 1977.
150. Ott, E. R. “Process Quality Control”, McGraw-Hill Kogakusha Ltd.,
Tokyo, 1975.
151. Owen, D.R.J and Vaz, Jr M. “Computational techniques applied tohigh-speed machining under adiabatic strain localization conditions”,Computational Methods in Applied Mechanical Engineering, Vol. 171,pp.445-461, 1999.
152. Oxley, P.L.B. “Mechanics of machining, an analytical approach toassessing machinability”, Ellis Harwood Limited, 1989.
289
153. Oyane, M., Takashima, F., Osakada, K. and Tanaka, H. “The behaviorof some steels under dynamic compression”, in: Proceedings of 10thJapan Congress on Testing Materials, pp. 72-76, 1967.
154. Ozel, T. “Development of a predictive machining simulator fororthogonal metal cutting process”, 4
th International conference on
Engineering Design and Automation, Orlando, Florida, USA, pp.1-7,2000.
155. Ozel, T. “The influence of friction models on finite elementsimulations of machining”, International Journal of Machine Tools andManufacture, Vol. 46, pp.518-530, 2006.
156. Ozel, T. and Altan, T. “Process simulation using finite element method-prediction of cutting forces, tool stresses and temperatures in highspeed flat end milling”, International Journal of Machine Tools andManufacture, Vol.40, pp.713-738, 2000.
157. Ozel, T. and Karpat, Y. “Identification of Constitutive Material modelParameters for High-Strain Rate Metal Cutting Conditions UsingEvolutionary Computational Algorithms”, Materials andManufacturing Processes, Vol. 22, pp. 659-667, 2007.
158. Ozel, T. “Modelling of hard part machining: effect of insert edgepreparation for CBN cutting tools”, Journal of Materials ProcessingTechnology, Vol. 141, pp.284-93, 2003.
159. Ozel, T. “Investigation of High Speed Flat End Milling Process”,PhD Dissertation, The Ohio State University, Columbus, Ohio, 1998.
160. Ozel, T. and Zeren, E. “Determination of work material flow stress andfriction for FEA of machining using orthogonal cutting tests”, Journalof Materials Processing Technology, Vol. 153-154, pp.1019-1025,2004.
161. Ozel, T. and Zeren, E. “A methodology to determine work material
flow stress and tool-chip interfacial friction properties by using
analysis of machining”, Journal of Manufacturing Science and
Engineering, Vol. 128, pp.119-129, 2006.
162. Ozlu, E., Budak, E. and Molinari, A. “Analytical and experimentalinvestigation of rake contact and friction behavior in metal cutting”,International Journal of Machine Tools and Manufacture, Vol.49,
pp. 865-875, 2009.
290
163. Pantale, O., Bacaria, J.L., Dalverny, O., Rakotomalala, R. and Caperaa,S. “2D and 3D numerical models of metal cutting with damageeffects”, Computational Methods in Applied Mechanical Engineering,
Vol.193, pp.4383-4399, 2004.
164. Parakkal, G., Zhu, R., Kapoor, S.G. and DeVor, E. “Modelling ofturning process cutting forces for grooved tools”, International Journal
of Machine Tools and Manufacture, Vol.42, pp. 179-191, 2002.
165. Peters, J. and Vanherck, P. “Machine tool stability tests and the
incremental stiffness”, Annals of CIRP, Vol. 17, pp.225-232, 1969.
166. Peters, J., Vanherck, P. and Van Brussel, H. “The measurement of thedynamics cutting coefficients”, Annals of CIRP, Vol.20, pp.129-136,
1971.
167. Phaniraj, M.P and Lahiri, A.K. “The applicability of neural networkmodel to predict flow stress for carbon steels”, Journal of Materials
Processing Technology, Vol.141, pp. 219-227, 2003.
168. Ross, Phillip J. “Taguchi techniques for quality engineering”, Tata
McGraw Hil1, 1996.
169. Pietrzyk, M. “Through–process modelling of microstructure evolutionin hot forming of steels”, Journal of Material Processing Technology,
Vol.125 -126, pp. 53-62, 2002.
170. Pujana, J., Arrazola, P.J., Saoubi, R.M. and Chandrasekaran, H.“Analysis of the inverse identification of constitutive equations appliedin orthogonal cutting process”, International Journal of Machine Tools
and Manufacture, Vol.47, pp. 2153-2161, 2007.
171. Raczy, A., Elmadagli, M., Altenhof, W.J. and Alpas, A.T. “AnEulerian finite-element model for determination of deformation state ofa copper subjected to orthogonal cutting”, Metallurgical and Material
Transactions A, Vol. 35, pp.2393-2400, 2004.
172. Rakotomalala, R., Joyot, P. and Touratier, M. “Arbitrary Lagrangian-Eulerian thermo mechanical finite element model of material cutting”,Computational Numerical Methods in Engineering, Vol.9, pp.975-987,
1993.
173. Rao, C.V. “Analysis of Means-A Review”, Journal of QualityTechnology, Vol. 37, pp.308-315, 2005.
291
174. Rhim, S-H and Oh, S-I “Prediction of serrated chip formation in metal
cutting process with new flow stress model for AISI 1045 steel”,
Journal of Materials Processing Technology, Vol.171, pp.417-422,
2006.
175. Sartkulvanich, P., Altan, T. and Gocmen, A. “Effects of the flow stress
and friction models in finite element simulation of orthogonal cutting-a
sensitivity analysis”, Machining Science and Technology, Vol. 9,
pp.1-26, 2005.
176. Sartkulvanich, P., Koppka, F. and Altan, T. “Determination of flow
stress for metal cutting simulation-a progress report”, Journal of
177. Seah, K.W.H., Raheman, M., Li, X.P and Zhang, X.D. “A three
dimensional model of chip flow, chip curl and chip breaking for
oblique cutting”, International Journal of Machine Tools and
Manufacture, Vol.36, pp.1385-1400, 1996.
178. Sekhon, G.S. and Chenot, J-L “Numerical simulation of continuous
chip formation during non-steady orthogonal cutting’ Engineering
Computation”, Vol. 10, pp.31- 48, 1993.
179. Shatla, M., Christian, K. and Altan, T. “Process modeling in
machining. Part I: determination of flow stress data”, International
Journal of Machine Tools and Manufacture, Vol.41, pp. 1511-1534,
2001 a.
180. Shatla, M., Christian, K. and Altan, T. “Process modeling in
machining. Part II: validation and applications of the determined flow
stress data”, International Journal of Machine Tools and Manufacture,
Vol. 41, pp. 659-1680, 2001 b.
181. Shatla, M., Yen, Y.C. and Altan, T. “Tool-workpiece interface in
orthogonal cutting-application of FEM modelling”, Transactions of
NAMRI/SME XXVII, pp.173-178, 2000.
182. Shaw, M.C. “Metal Cutting Principles”, Second ed., Oxford Science
Publications, Oxford, 2005.
183. Shet, C. and Deng, X. “Finite element analysis of the orthogonal
metal cutting process”, Journal of Materials Processing Technology,
Vol. 105, pp.95-109, 2000.
292
184. Shet, C. and Deng, X. “Residual stresses and strains in orthogonalmetal cutting”, International Journal of Machine Tools and
Manufacture, Vol.43, pp.573-587, 2003.
185. Shi, B., Attia, H. and Tounsi, N. “Identification of MaterialConstitutive Laws for Machining-Part I: An Analytical ModelDescribing the Stress, Strain, Strain Rate, and Temperature Fields inthe Primary Shear Zone in Orthogonal Metal Cutting”, Journal ofManufacturing Science and Engineering, Vol.132, 051008, pp. 1 – 11,
2010 a.
186. Shi, B., Attia, H. and Tounsi, N. “Identification of MaterialConstitutive Laws for Machining-Part II: Generation of the constitutivedata and validation of the constitutive law”, Journal of Manufacturing
Science and Engineering, Vol.132, 051009, pp. 1-9, 2010 b.
187. Shi, G., Deng, X. and Shet, C. “A finite element study of the effect offriction in orthogonal metal cutting”, Finite Elements Analysis and
Design, Vol.38, pp.863-883, 2002.
188. Shi, J. and Richard Liu, C. “The Influence of Material Models onFinite Element Simulation of Machining”, Journal of Manufacturing
Science and Engineering, Vol. 126, pp. 849-857, 2004.
189. Shih, A.J., Chandrasekar, S. and Yang, H.T. “The finite elementsimulation of metal cutting processes with strain-rate and temperatureeffects”, In: Klamecki B.E, Weinmann KJ (eds) Fundamental issues inmachining, Proceedings of the winter annual meeting of the AmericanSociety of Mechanical Engineers, PED, ASME, New York, Vol. 43,
pp. 11-24, 1990.
190. Shih, A.J. “Finite element analysis of orthogonal metal cuttingmechanics”, International Journal of Machine Tools and Manufacture,
Vol.36, pp. 255-273, 1996.
191. Shih, A.J. “Finite element simulation of orthogonal metal cutting”,
ASME Journal of Engineering for Industry, Vol.117, pp. 84-93, 1995.
192. Shirakashi, T. and Obikawa, T. “Recent progress and some difficultiesin computational modelling of machining”, Machining Science and
Technology, Vol. 2, pp.277-301, 1998.
193. Shirakashi, T. and Usui, E. “Simulation analysis of orthogonal metalcutting mechanism” In: Proceedings of the First International
conference on Production engineering, Part I, pp. 535-540, 1974.
293
194. Shirakashi, T., Maekawa, K. and Usui, E. “Flow stress of low carbon
steel at high temperature and strain rate”, (Parts I-II), Bulletin of the
Japan Society of Precision Engineering, Vol.17, pp.161-172, 1983.
195. Sima, M. and Ozel, T. “Modified material constitutive models for
serrated chip formation simulations and experimental validation in
machining of titanium alloy Ti-6Al-4V”, International Journal of
Machine Tools and Manufacture, Vol.50, pp. 943-960, 2010.
196. Soo, S.L., Aspinwall, D.K. and Dewes, R.C. “3D FE modelling of the
cutting of Inconel 718”, Journal of Materials Processing Technology,
Vol.150, pp.116-123, 2004 a.
197. Soo, S.L., Aspinwall, D.K. and Dewes, R.C. “Three-dimensional finite
element modelling of high-speed milling of Inconel 718”, Proceedings
of the Institution of Mechanical Engineers-B, Journal of Engineering
Manufacture Vol.218, pp.1555-1561, 2004 b.
198. Stevenson, M. G. and Oxley, P. L. B. “Experimental Investigation on
the Influence of Speed and Scale on the Strain-Rate in a Zone of
Intense Plastic Deformation”, Proceedings of the Institution of
Mechanical Engineers, Vol.184, pp. 561-576, 1970.
199. Strenkowski, J.S. and Athavale, S.M. “A partially constrained Eulerian
orthogonal cutting model for chip control tools”, Journal of
Manufacturing Science and Engineering, Transactions of ASME,
Vol.119, pp.681-688, 1997.
200. Strenkowski, J.S. and Moon, K.J. “Element prediction of chip
geometry and tool/workpiece temperature distributions in orthogonal
metal cutting”, Journal of Engineering Industry, Transactions of
ASME, Vol.112, pp.313-318, 1990.
201. Strenkowski, J. S. and Carroll III, J. T. “A Finite Element Model of
Orthogonal Metal Cutting”, ASME Journal of Engineering Industry,
Vol.107, pp. 349-354, 1985.
202. Sun, J. and Guo, Y.B. “Material flow stress and failure in multiscale
machining of titanium alloy Ti-6Al-4V”, International Journal of