-
EM 385-1-1 15 Sep 08
APPENDIX S
REFERENCES AND RESOURCES
SECTION A. REFERENCES
1. NUMBERED PUBLICATIONS
ACI 347 Guide to Formwork for Concrete
ANSI 01.1 Woodworking Machinery
ANSI A10.3 Safety Requirements for Powder-Activated Fastening
Systems
ANSI A10.4 Safety Requirements for Personnel Hoists and Employee
Elevators for Construction and Demolition Operations
ANSI A10.5 Safety Requirement for Material Hoists
ANSI A10.6 Safety Requirements for Demolition
ANSI A10.7 Safety Requirements for Commercial Explosives and
Blasting Agents
ANSI A10.8 Safety Requirements for Scaffolding
ANSI A10.22 Safety Requirements for Rope-Guided and Non Guided
Worker’s Hoists
ANSI A10.34 Protection of the Public on or Adjacent to
Construction Sites
ANSI A14.1 Ladders – Wood – Safety Requirements
S-1
-
EM 3851-1 15 Sep 08
ANSI A14.2 Ladders – Portable Metal – Safety
Requirements
ANSI A14.3 -2008 Ladders – Fixed – Safety Requirements
ANSI A14.4 Safety Requirements for Job Made Wooden Ladders
ANSI B74.2 Specifications for Shapes and Sizes of Grinding
Wheels, and for Shapes and Sizes and Identifications of Mounted
Wheels
ANSI C95.4 Radio Frequency Antennas When Using Electric Blasting
Caps During Explosive Operations
ANSI D6.1 Manual on Uniform Traffic Control Devices for Streets
and Highways
ANSI Z41 Personnel Protection – Protective Footwear
ANSI Z80.3 Requirements for Nonprescription Sunglasses and
Fashion Eyewear
ANSI Z88.2 Practices for Respiratory Protection
ANSI Z89.1 Personal Protection - Protective Headwear for
Industrial Workers
ANSI Z117.1 Confined Spaces
ANSI Z136.1 Safe Use of Lasers
ANSI Z244.1 Personnel Protection – Lockout/Tagout of Energy
Sources
S-2
-
EM 385-1-1 15 Sep 08
ANSI Z308.1 Minimum Requirements for Workplace First Aid
Kits
ANSI Z358.1 Emergency Eyewash and Shower Equipment
ANSI Z490.1 Accepted Practices for Safety, Health and
Environmental Training
ANSI Z535.1 Safety Color Code
ANSI Z535.2 Environmental and Facility Safety Signs
ANSI Z535.5 Accident Prevention Tags (for temporary hazards)
ANSI/ACDE-01 Divers – Commercial Diver Training – Minimum
Standard
ANSI/AGA GPTC GPTC Guide for the Gas Transmission Z380.1 and
Distribution Piping System
ANSI/API 2C Specification for Offshore Cranes
ANSI/ASME A13.1 Scheme for the Identification of Piping
Systems
ANSI/ASME A17.1 Safety Code for Elevators and Escalators
ANSI/ASME B30.2 Overhead and Gantry Cranes, Top Running Bridge,
Single or Multiple Girder, Top Running Trolley Hoist
ANSI/ASME B30.3 Construction Tower Cranes
ANSI/ASME B30.4 Portal, Tower, and Pedestal Cranes
S-3
-
EM 3851-1 15 Sep 08
ANSI/ASME B30.5 Mobile and Locomotive Cranes
ANSI/ASME B30.6 Derricks
ANSI/ASME B30.8 Floating Cranes and Floating Derricks
ANSI/ASME B30.9 Slings
ANSI/ASME B30.10 Hooks
ANSI/ASME B30.11 Monorails and Underhung Cranes
ANSI/ASME B30.12 Handling Loads Suspended from Rotorcraft
ANSI/ASME B30.17 Overhead and Gantry Cranes (Top Running Bridge,
Single Girder, Underhung Hoist)
ANSI/ASME B30.22 Articulating Boom Cranes
ANSI/ASME B30.26 Rigging Hardware
ANSI/ASME B31.1 Power Piping
ANSI/ASME B56.1 Safety Standard for Low Lift and High Lift
Trucks
ANSI/ASSE A10.38 Basic Elements of an Employer’s Program to
Provide a Safe and Healthful Work Environment
ANSI/ASSE A10.44 Control of Energy Sources (Lockout/Tagout) for
Construction and Demolition
S-4
-
EM 385-1-1 15 Sep 08
ANSI/ASSE Z87.1 Practice for Occupational and Educational Eye
and Face Protection
ANSI/ASSE Z359 Fall Protection Code
ANSI/ASSE Z359.0 Definitions and Nomenclature Used for Fall
Protection and Fall Arrest
ANSI/ASSE Z359.1 Safety Requirements for Personal Fall Arrest
Systems, Subsystems and Components
ANSI/ASSE Z359.2 Minimum Requirements for a Comprehensive
Managed Fall Protection Program
ANSI/ASSE Z359.3 Safety Requirements for Positioning and Travel
Restraint Systems
ANSI/ASSE Z359.4 Safety Requirements for Assisted-Rescue and
Self-Rescue systems, Subsystems and Components
ANSI/AWS D1.0 Code for Welding in Building Construction
ANSI/AWS D1.1 Structural Welding Code - Steel
ANSI/AWS F4.1 Recommended Safe Practices for Preparation for
Welding and Cutting of Containers and Piping
ANSI/AWS Z49.1 Safety in Welding, Cutting and Allied
Processes
ANSI/IEEE C95.2 Standard for Radio Frequency Energy and Current
Flow Symbols
S-5
-
EM 3851-1 15 Sep 08
ANSI/IESNA RP-1 Practice for Office Lighting
ANSI/IESNA RP-8 Roadway Lighting ANSI Approved
ANSI/IESNA RP-12 Marine Lighting
ANSI/ISEA 105 Hand Protection Selection Criteria
ANSI/ISEA 107 High Visibility Safety Apparel
ANSI/SIA A92.2 Vehicle-Mounted Elevating and Rotating Aerial
Devices
ANSI/SIA A92.3 Manually Propelled Elevating Aerial Platforms
ANSI/SIA A92.5 Boom-supported Elevated Working Platforms
ANSI/SIA A92.6 Self-Propelled Elevating Work Platforms
ANSI/UL 1313 Nonmetallic Safety Cans for Petroleum Products
AR 11-9 The Army Radiation Safety Program
AR 11-34 The Army Respiratory Protection Program
AR 40-5 Preventive Medicine
AR 95 Series Aviation
AR 200-1 Environmental Protection and Enhancement
AR 385-10 The Army Safety Program
S-6
-
EM 385-1-1 15 Sep 08
AR 385-11 Ionizing Radiation Protection
AR 385-40 Accident Reporting and Records
AR 385-55 Prevention of Motor Vehicle Accidents
AR 700-136 Tactical Land Based Water Resources Management in
Contingency Operations
ASCE 7-98 Guide to the Use of Wind Load Provisions
ASTM D120 Standard Specification for Rubber Insulating
Gloves
ASTM D1051 Standard Specification for Rubber Insulating
Sleeves
ASTM F496 Standard Specification for In-Service Care of
Insulating Gloves and Sleeves
ASTM F696 Standard Specification for Leather Protectors for
Rubber Insulating Gloves and Mittens
ASTM F852 Standard Specification for Portable Gasoline
Containers for Consumer Use
ASTM F976 Standard Specification for Portable Kerosine
Containers for Consumer Use
ASTM F1117 Standard Specification for Dielectric Overshoe
Footwear
S-7
-
EM 3851-1 15 Sep 08
ASTM F1166 Standard Practice for Human
Engineering Design for Marine Systems, Equipment and
Facilities
ASTM F1236 Standard Guide for Visual Inspection of Electrical
Protective Rubber Products
ASTM F1506 Standard Performance Specification for Flame
Resistant Textile Materials for Wearing Apparel for Use by
Electrical Workers Exposed to Momentary Electric Arc and Related
Thermal Hazards
ASTM F1897 Standard Specification for Leg Protection for Chain
Saw Users
ASTM F2412 Standard Test Methods for Foot Protection
ASTM F2413 Standard Specification for Performance Requirements
for Foot Protection
CGA C6 Standard for Visual Inspection of Steel Compressed Gas
Cylinders
CGA C8 Standard for Requalification of DOT-3HT, CTC-3HT, and
TC-3HTM Seamless Steel Cylinders
CGA G7.1 Commodity Specification for Air
CMAA 70 Multiple Girder Electric Overhead Traveling Cranes
S-8
-
EM 385-1-1 15 Sep 08
DDESB TP No. 18 Minimum Qualifications for UXO Technicians and
Personnel, Dec 2004
DFARS Subpart Drug-Free Work Force 252.223-7004
DOD 6055.09-STD DOD Ammunition and Explosives Safety Standards,
Feb 08
DODI 4715.5-G Overseas Environmental Baseline Guidance
Document
DODI 6055.1 DOD Safety and Occupational Health Program
DODI 6055.3 Hearing Conservation
DODI 6055.12 DOD Hearing Conservation Program
EM 385-1-97 Munitions and Explosives Response Actions
EO 12196 Occupational Safety and Health Programs for Federal
Employees
EP 75-1-2 Unexploded Ordnance (UXO) Support During Hazardous,
Toxic and Radioactive Waste (HTRW) and Construction Activities
EP 75-1-3 Recovered Chemical Warfare Materiel
(RCWM) Responses
EP 310-1-6A Sign Standards Manual, Volume 1
EP 310-1-6B Sign Standards Manual, Volume 2
S-9
-
EM 3851-1 15 Sep 08
EP 385-1-95a Basic Safety Concepts and
Considerations for OE Operations EP 385-1-95b Explosives Safety
Submissions EP 1130-2-500 Inspection and Certification
Agreement
Appendix L Between USACE and USCG
EP 1130-2-540 Project Operations and Environmental Stewardship
Operations and Maintenance Guidance and Procedures
ER 95-1-1 Control and Use of Aircraft
ER 385-1-6 Standard Color and Markings for Hardhats
ER 385-1-91 Training, Testing, and Licensing of Boat
Operators
ER 385-1-95 Safety and Health Requirements for Munitions and
Explosives of Concern (MEC) Operations
FAR Clause 52.236-13 Accident Prevention
Federal Aviation General Operating and Flight Rules Regulation
91
Federal Aviation Rotorcraft External-Load Operations Regulation
133
Federal Aviation Operating Requirements: Commuter Regulation 135
and On Demand Operations and Rules Governing Persons On Board Such
Aircraft
S-10
-
EM 385-1-1 15 Sep 08
FM 10-52 Water Supply in Theaters of Operations
FM 21-10/ Field Hygiene and Sanitation MCRP 4-11.1D
MIL-STD 101B Color Code for Pipelines and for Compressed Gas
Cylinders
NAVMED P-5010- Manual of Naval Preventive Medicine
010-LP-207-1300
NAVSEA S9074-AQ Requirements for Welding GIB-010/248 Brazing
Procedure and Performance Qualifications
NEC 250 Grounding
NEC 250.30 Grounding of Transformers and Generators
NEC 250.34 Grounding of Services Equipment
NEC 410 Lighting Fixtures, Lampholders, Lamps, and
Receptacles
NEC 502 Class II Locations
NFPA 10 Portable Fire Extinguishers
NFPA 30 Flammable and Combustible Liquids Code
NFPA 30A Automotive and Marine Service Station Code
S-11
-
EM 3851-1 15 Sep 08
NFPA 51 Standard Design and Installation of
Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied
Processes
NFPA 58 Liquefied Petroleum Gas Code
NFPA 70E Standard for Electrical Safety Requirements for
Employee Workplaces
NFPA 101 Life Safety Code
NFPA 241 Safeguarding Construction, Alteration, and Demolition
Operations
NFPA 295 Wildfire Control
NFPA 302 Pleasure and Commercial Motor Craft
NFPA 327 Cleaning or Safeguarding Small Tanks and Containers
without Entry
NFPA 386 Portable Shipping Tanks for Flammable and Combustible
Liquids
NFPA 1977 Protective Clothing and Equipment for Wildland Fire
Fighting
NIST Voluntary Product American Softwood Lumber Standard
Standard DOC PS 20
Power Crane and Draglines Shovel Association Standard No. 4
SAE J167 Overhead Protection for Agricultural Tractors - Test
Procedures and Performance Requirements
S-12
-
EM 385-1-1 15 Sep 08
SAE J220 Crane Boom Stops
SAE J231 Minimum Performance Criteria for Falling Object
SAE J386 Operator Restraint System for Off-Road Work
Machines
SAE J1040 Performance Criteria for Rollover Protective
Structures (ROPS) for Construction, Earthmoving, Forestry, and
Mining Machines
SAE J1042 Operator Protection for General-Purpose Industrial
Machines
SAE J1043 Minimum Performance Criteria for Falling Object
Protective Structure (FOPS) for Industrial Machines
SAE J1084 Operator Protective Structure Performance Criteria for
Certain Forestry Equipment
SAE J1194 Roll Over Protective Structures (ROPS) for Wheeled
Agricultural Tractors
SAE J1366 Rating Lift Cranes Operating on Platforms in the Ocean
Environment
TB MED 577 Sanitary Control and Surveillance of Field Water
Supplies
UFGS 01525 Safety Requirements
UL 943 Ground-Fault Circuit-Interrupters
S-13
-
EM 3851-1 15 Sep 08
5 CFR 293 Personnel Records
10 CFR 20 Standards for Protection Against Radiation
10 CFR 20 Assigned Protection Factors for Appendix A
Respirators
10 CFR 20 Annual Limits on Intake (ALIs) and Appendix B Derived
Air Concentrations (DACs) of Radionuclides for Occupational
Exposure; Effluent Concentrations; Concentrations for Release of
Sewerage
10 CFR Energy
10 CFR 20 Quantities of Licensed Material Appendix C Requiring
Labels
10 CFR 20.1906 Procedures for Receiving and Opening Packages
14 CFR Aeronautics and Space
14 CFR 91 General Operating and Flight Rules
14 CFR 133 Rotorcraft External-Load Operations
14 CFR 135 Operating Requirements: Commuter and On Demand
Operations and Rules Governing Persons On Board Such Aircraft
27 CFR Alcohol, Tobacco Products and Firearms
27 CFR 555 Commerce in Explosives
S-14
-
EM 385-1-1 15 Sep 08
29 CFR Labor
29 CFR 1904 Recording and Reporting Occupational Injuries and
Illnesses
29 CFR 1910 Occupational Safety and Health Standards
29 CFR 1910 Commercial Diving Operations Subpart T
29 CFR 1910.94 Ventilation
29 CFR 1910.25 Portable Wood Ladders
29 CFR 1910.95 Noise Exposure Computation Appendix A
29 CFR 1910.109 Explosives and Blasting Agents
29 CFR 1910.119 Process Safety Management of Highly Hazardous
Chemicals
29 CFR 1910.120 Hazardous Waste Operations and Emergency
Response
29 CFR 1910.134 Respiratory Protection
29 CFR 1910.134 User Seal Check Procedures Appendix B-1
29 CFR 1910.134 OSHA Respirator Medical Evaluation Appendix C
Questionnaire
29 CFR 1910.134 Information for Employees Using Appendix D
Respirators When Not Required Under the Standard
S-15
-
EM 3851-1 15 Sep 08
29 CFR 1910.141 Sanitation
29 CFR 1910.145 Specifications for Accident Prevention Signs and
Tags
29 CFR 1910.146 Permit-Required Confined Spaces
29 CFR 1910.155 Scope, Application and Definitions Applicable to
Subpart L
29 CFR 1910.178 Powered Industrial Trucks
29 CFR 1910.213 Woodworking Machinery Requirements
29 CFR 1910.219 Mechanical Power-Transmission Apparatus
29 CFR 1910.1000 Air contaminants
29 CFR 1910.1000 Mineral Dusts Table Z-3
29 CFR 1910.1001 Asbestos
29 CFR 1910.1020 Access to Employee Exposure and Medical
Records
29 CFR 1910.1025 Lead
29 CFR 1910.1030 Bloodborne Pathogens
29 CFR 1910.1096 Ionizing Radiation
29 CFR 1910.1200 Hazard Communication
29 CFR 1915 Occupational Safety and Health Standards for
Shipyard Employment
S-16
-
EM 385-1-1 15 Sep 08
29 CFR 1915 Confined and Enclosed Spaces for Subpart B Other
Dangerous Atmospheres in Shipyard Employment
29 CFR 1918.66 Cranes and Derricks Other Than Vessel’s Gear
29 CFR 1926 Safety and Health Regulations for Construction
29 CFR 1926 Excavations Subpart P
29 CFR 1926 Steel Erection Subpart R
29 CFR 1926 Blasting and the Use of Explosives Subpart U
29 CRF 1926.35 Employee Emergency Action Plans
29 CFR 1926.59 Hazard Communication
29 CFR 1926.62 Lead
29 CFR 1926.64 Process Safety Management of Highly Hazardous
Chemicals
29 CFR 1926.65 Hazardous Waste Operations and Emergency
Response
29 CFR 1926.754 Structural Steel Assembly
29 CFR 1926.803 Compressed Air
29 CFR 1926.1101 Asbestos
29 CFR 1960 Basic Program Elements for Federal Employees
OSHA
S-17
-
EM 3851-1 15 Sep 08
30 CFR Mineral Resources
30 CFR 36 Approval Requirements for Permissible Mobile
Diesel-Powered Transportation Equipment
30 CFR 56 Safety and Health Standards--Surface Metal and
Nonmetal Mines
30 CFR 57 Safety and Health Standards--Underground Metal and
Nonmetal Mines
30 CFR 70 Mandatory Health Standards-- Underground Coal
Mines
30 CFR 71 Mandatory Health Standards--Surface Coal Mines and
Surface Work Areas of Underground Coal Mines
33 CFR Navigation and Navigable Waters
33 CFR 88.13 Lights on Moored Barges
33 CFR 88.15 Lights on Dredge Pipelines
33 CFR 155 Oil or Hazardous Material Pollution Prevention
Regulations for Vessels
33 CFR 155.320 Fuel Oil and Bulk Lubricating Oil Discharge
Containment
33 CFR 156 Oil and Hazardous Material Transfer Operations
33 CFR 156.120 Requirements for Transfer
33 CFR 183 Boats and Associated Equipment
S-18
-
EM 385-1-1 15 Sep 08
40 CFR Protection of Environment
40 CFR 61 National Emission Standard for Subpart M Asbestos
40 CFR 141 National Primary Drinking Water Regulations
40 CFR 143 National Secondary Drinking Water Regulations
40 CFR 302 Designation, Reportable Quantities, and
Notification
42 CFR Public Health
42 CFR 84 Approval of Respiratory Protective Devices
46 CFR Shipping
46 CFR 25.30-15 Fixed Fire Extinguishing Systems
46 CFR 45.115 Bulwarks and Guardrails
46 CFR 58.50-10 Diesel Fuel Tanks
46 CFR 64 Marine Portable Tanks and Cargo Handling Systems
46 CFR 98.30 Handling and Storage of Portable Tanks
46 CFR 160 Lifesaving Equipment
46 CFR 173 Special Rules Pertaining to Vessel Use
S-19
-
EM 3851-1 15 Sep 08
49 CFR Transportation
49 CFR U.S. DOT Hazardous Materials Chapter 1 Regulations
49 CFR 171 General Information, Regulations, and Definitions
49 CFR 172 Hazardous Materials Table, Special Provisions,
Hazardous Materials Communications, Emergency Response Information
and Training Requirements
49 CFR 173 Shipping Container Specification Regulations of the
Department of Transportation
49 CFR 174 Carriage by Rail
49 CFR 175 Carriage by Aircraft
49 CFR 176 Carriage by Vessel
49 CFR 177 Carriage by Public Highway
49 CFR 177.835 Class 1 (Explosive) Materials
49 CFR 178 Specifications for Packaging
49 CFR 179 Specifications for Tank Cars
49 CFR 192 Welding of Steel in Pipelines
49 CFR 571 Federal Motor Vehicle Safety Standards
S-20
-
EM 385-1-1 15 Sep 08
2. UNNUMBERED PUBLICATIONS
ABS, Guide for Certification of Cranes.
ACGIH, Threshold Limit Values and Biological Exposure
Indices.
AIHA, Welding Health and Safety: A Field Guide for OEHS
Professionals.
ASME, Boiler and Pressure Vessel Code.
ASME, Code for Unfired Pressure Vessels.
DOT Federal Highway Administration's, Manual on Uniform Traffic
Control Devices for Streets and Highways.
ILO International Classification of Radiographs of
Pneumoconioses, most recent edition.
National Classification Committee, National Motor Freight
Classification, National Motor Freight Traffic Association,
Alexandria, VA.
NBBI, National Board Inspection Code.
NIOSH, Respirator Decision Logic.
NIOSH, Work Practice Guide for Manual Lifting.
Occupational Safety and Health Act of 1970.
Oil Pollution Act of 1990.
Uniform Classification Committee, Uniform Freight
Classification, National Railroad Freight Committee, Atlanta,
GA.
United Nations, Recommendations on the Transport of Dangerous
Goods, United Nations, New York, 1995.
S-21
-
EM 3851-1 15 Sep 08
U.S. Navy Diving Manual.
3. FORMS
ENG Form 5044-R USACE Entry Permit (LRA)
NRC Form 3 Notice to Employees
NRC Form 241 Report of Proposed Activities in Non- Agreement
States, Areas of Exclusive Federal Jurisdiction, or Offshore
Waters
OSHA 300 Form Log of Work-Related Injuries and Illnesses
OSHA 300A Form Summary of Work-Related Injuries and
Illnesses
SF 46 U.S. Government Motor Vehicle Operator’s Identification
Card
USCG Form 835 Notice of Merchant Marine Inspection
Requirements
SECTION B. RESOURCES
Acoustical Society of America (ASA), 2 Huntington Quadrangle,
Suite 1N01, Melville, NY 11747-4502; (516) 576-2360, (516) 576-2377
(fax)
American Association of State Highway and Transportation
Officials (AASHTO), 444 N. Capitol St., N.W., Washington, DC 20001;
(202) 624-5800, (202) 624-5806 (fax)
American Bureau of Shipping (ABS), 16855 Northchase Dr.,
Houston, TX 77060; (281) 877-5800
S-22
-
EM 385-1-1 15 Sep 08
American Concrete Institute (ACI), 38800 Country Club Dr.,
Farmington Hills, MI 48331; (248) 848-3700, (248) 848-3701
(fax)
American Conference of Governmental Industrial Hygienists
(ACGIH), 1330 Kemper Meadow Dr., Cincinnati, OH 45240; (513)
742-2020
American Gas Association (AGA), 400 N. Capitol St., N.W.,
Washington, DC 20001; (202) 824-7000, (202) 824-7115 (fax)
American Industrial Hygiene Association (AIHA), 2700 Prosperity
Ave, Suite 250, Fairfax, VA 22031; (703) 849-8888, (703) 207-3561
(fax)
American Institute of Steel Construction (AISC), One East Wacker
Dr., Suite 3100, Chicago, IL 60601-2001; (312) 670-2400, (312)
670-5403 (fax)
American Institute of Timber Construction (AITC), 7012 S. Revere
Pkwy, Suite 140, Englewood, CO 80112; (303) 792-9559, (303)
792-0669 (fax)
American National Standards Institute (ANSI), 25 West 43rd St.,
New York, NY 10036; (212) 642-4900, (212) 398-0023 (fax)
American Petroleum Institute (API), 1220 L St., NW, Washington,
DC 20005-4070; (202) 682-8000, (202) 682-8232 (fax)
American Society of Civil Engineers (ASCE), 1801 Alexander Bell
Dr., Reston, VA 20191-4400; (703) 295-6300, (703) 295-6222
(fax)
American Society of Heating, Refrigerating and Air-Conditioning
Engineers (ASHRAE), 1791 Tullie Circle, N.E., Atlanta, GA
30329-2305; (404) 636-8400, (404) 321-5478 (fax)
American Society of Mechanical Engineers (ASME), Three Park
Ave., New York, NY, 10016-5990; (212) 591-7722, (212) 591-7674
(fax)
S-23
-
EM 3851-1 15 Sep 08
American Society of Safety Engineers (ASSE), 1800 E. Oakton St.,
Des Plaines, IL 60018-2187 ; (847) 699-2929, (847) 768-3434
(fax)
American Society for Testing and Materials (ASTM), 100 Barr
Harbor Dr., West Conshohocken, PA 19428-2959; (610) 832-9585, (610)
832-9555 (fax)
American Welding Society (AWS), 550 LeJeune Rd., N.W., Miami FL
33126; (305) 443-9353, (305) 443-7559 (fax)
Association of Diving Contractors (ADC), 5206 FM 1960 West,
Suite 202, Houston, TX 77069; (281) 893-8388, (281) 893-5118
(fax)
Compressed Air and Gas Institute (CAGI), 1300 Sumner Ave.,
Cleveland, OH 44115-2851; (216) 241-7333, (216) 241-0105 (fax)
Compressed Gas Association (CGA), 4221 Walney Rd., 5th Floor,
Chantilly, VA 20151-2923; (703) 788-2700, (703) 961-1831 (fax)
Concrete Reinforcing Steel Institute (CRSI), 933 Plum Grove Rd.,
Schaumberg, IL 60173; (847) 517-1200, (708) 517-1206 (fax) Conveyor
Equipment Manufacturers Association (CEMA), 6724 Lone Oak Blvd,
Naples, FL 34109; (239) 514-3441, (239) 514-3470 (fax) Gas Piping
Technology Committee (GPTC, ANSI Z380.1), American Gas Association,
400 N. Capitol Street, N.W., Washington, DC 20001; (202)
824-7000
Grinding Wheel Institute (GWI), 30200 Detroit Rd., Cleveland, OH
44115-1967; (216) 899-0010, (216) 892-1404 (fax)
Hardwood Plywood and Veneer Association. 1825 Michael Faraday
Dr., Reston, VA 20195-0789; (703) 435-2900, (703) 435-2537
(fax)
S-24
-
EM 385-1-1 15 Sep 08
Human Factors and Ergonomics Society, P.O. Box 1369, Santa
Monica, CA 90406-1369; (310) 394-1811, (310) 394-2410 (fax)
Illuminating Engineering Society of North America (IESNA), 120
Wall St., Floor 17, New York, NY 10005; (212) 248-500, (212)
248-5017 (fax)
Institute of Electrical and Electronics Engineers (IEEE), 3 Park
Ave, 17th Floor, New York, NY 10016-5997; (212) 419-7900, (212)
752-4929 (fax)
Institute of Makers of Explosives (IME), 1120 19th St., N.W.,
Suite 310, Washington, DC 20036; (202) 429-9280, (202) 293-2420
(fax)
International Organization for Standardization, 1, rue de
Varembé, Case postale 56, CH-1211 Geneva 20, Switzerland; +41 22
749 01 11, +41 22 7333 34 30 (fax)
International Safety Equipment Association, 1901 N. Monroe St.,
Arlington, VA 22209-1762; (703) 525-1695, (703) 528-2148 (fax)
Material Handling Institute (MHI), 8720 Red Oak Blvd., Suite
201, Charlotte, NC 28217; (704) 676-1190, (704) 676-1199 (fax)
Mine Safety and Health Administration (MSHA), 1100 Wilson Blvd.,
21st Floor, Arlington, VA 22209-3939; (202) 693-9400, (202)
693-9401 (fax)
National Association of Marine Surveyors, P.O. Box 9306,
Chesapeake, VA 23321-9306; (757) 488-9538, (757) 488-0584 (fax)
National Association of Safe Boating Law Administrator (NASBLA),
1500 Leestown Rd., Suite 330, Lexington, KY 40511; (859) 225-9487,
(859) 231-6403 (fax)
S-25
-
EM 3851-1 15 Sep 08
National Board of Boiler and Pressure Vessel Inspectors (NBBI),
1055 Crupper Ave., Columbus, OH 43229; (614) 888-8320, (614)
888-0750 (fax)
National Bureau of Standards (NBS). See National Institute for
Standards and Technology (NIST)
National Electrical Manufacturers Association (NEMA), 1300 N.
17th St., Suite 1847, Rosslyn, VA, 22209; (703) 841-3200, (703)
841-5900 (fax)
National Fire Protection Association (NFPA), 1 Batterymarch
Park, P.O. Box 9101, Quincy, MA 02169-7471; (617) 770-3000, (617)
770-0700 (fax)
National Institute for Occupational Safety and Health, 200
Independence Ave, S.W., Rm 715H, Washington, DC 20201; (202)
401-6997
National Institute for Standards and Technology (NIST), 100
Bureau Dr., Stop 3460, Gaithersburg, MD 20899-6478; (301) 975-6478,
(301) 975-2128 (fax)
National Safety Council (NSC), 1121 Spring Lake Dr., Itasca, IL
60143-3201; (630) 285-1121, (630) 285-1315 (fax)
Naval Sea Systems Command (NAVSEA), 1333 Isaac Hull Ave, S.E.,
Washington Navy Yard, DC 20376; (202) 781-000
Occupational Safety and Health Administration (OSHA), 200
Constitution Avenue, NW, Washington, DC 20210; 1-800-321-6742
Power Tool Institute (PTI), 1300 Sumner Ave, Cleveland, OH
44115-2851; (216) 241-7333, (216) 241-0105 (fax)
Scaffold Industry Association (SIA), 20335 Ventura Blvd., Suite
420, Woodland Hills, CA 91364; (818) 610-0320, (818) 610-0323
(fax)
S-26
-
EM 385-1-1 15 Sep 08
Scaffold, Shoring, and Forming Institute (SSFI), 1300 Sumner
Ave, Cleveland, OH 44115-2851; (216) 241-7333, (216) 241-0105
(fax)
Society of Automotive Engineers (SAE), 400 Commonwealth Dr.,
Warrendale, PA 15096-0001; (724) 776-4841, (724) 776-0790 (fax)
Underwriters Laboratory (UL). 333 Pfingsten Rd., Northbrook,
IL60062; (847) 282-8800, (847) 407-1395 (fax)
United States Government Printing Office (GPO), Superintendent
of Documents, U.S. Government Printing Office, Washington, DC
20402; (202) 512-1530, (202) 512-1262 (fax)
S-27
-
EM 3851-1 15 Sep 08
S-28
BLANK
REFERENCES AND RESOURCES49 CFR Transportation