This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Index
Smart 3D 2014R1 New Functionality
Smart 3D 2014 New Functionality
SP3D 2011 R1
SP3D 2011 SP1
SP3D 2009.1
Smart 3D 2014R1 New Functionality
Hangers & Supports 2014R1
Reports 2014R1
Smart 3D 2014 New Functionality
AllCodeLists_2014
Hangers & Supports 2014
Hvac_2014
Other_2014
Reports_2014
Structure_2014
SP3D 2011R1 New Functionality
AllCodeLists_2011R1
Geometric_2011R1
Hangers&Supports_2011R1
Other_2011R1
Reports_2011R1
SP3D 2011SP1 New Functionality
AllCodeLists_2011SP1
Equipment_2011SP1
Geometric_2011SP1
Hangers&Supports_2011SP1
Other_2011SP1
Piping_2011SP1
Reports_2011SP1
Structure_2011SP1
SP3D 2009 SP1
SP3D 2009.1 New Functionality
AllCodeLists_2009.1
Geometric_2009.1
Hangers&Supports_2009.1
NamingRules_2009.1
Other_2009.1
Structure_2009.1
SP3D 2009 SP1 New Functionality
AllCodeLists_2009SP1
Electrical_2009SP1
Equipment_2009SP1
Geometric_2009SP1
Hangers&Supports_2009SP1
HVAC_2009SP1
NamingRules_2009SP1
Other_2009SP1
Piping_2009SP1
Reports_2009SP1
Structure_2009SP1
Functionality Workbook
HS_Assembly.xlsConvert Prog IDs and Symbols to .NET
Worksheet Change Implemented
Modified VB Prog ID to .NET Prog IDConduitHangerStandard, PipeMiscellaneousStd
221545 New BeltTypeClass for SmartPlant Materials Handling
AllCodeLists
Worksheet(s)
JointRequirement AllCodeLists.xls
SelectionBasis AllCodeLists.xls
SelectionBasisperPCF AllCodeLists.xls
BoltLengthRoundOffBasis AllCodeLists.xls
GasketRequirementOverride AllCodeLists.xls
Reference Data Changes (Version 2011 R1 to 2014)
Applicable Workbooks
BranchReinforcementType AllCodeLists.xls
PipingCommodityType AllCodeLists.xls
SelectionBasis AllCodeLists.xls
StructFootingCompSizingRule AllCodeLists.xls
PartClassTypes AllCodeLists.xls
PartClassTypes AllCodeLists.xls
PropertyCategories AllCodeLists.xls
PartClassTypes AllCodeLists.xls
BranchFittingPlacementType AllCodeLists.xls
HVACCrosssectionOverrideOpt AllCodeLists.xls
HVACRunChangeAtCSChangeOpt AllCodeLists.xls
PartClassTypes AllCodeLists.xls
Value changed
Added JointRequirement worksheet.
Added BoltLengthRoundOffBasis worksheet.
Added "Pipe stock push-on bell end to be cut as plain end" and "Pipe stock to be grooved at one plain end" selection basis.
Added "Pipe stock push-on bell end to be cut as plain end" and "Pipe stock to be grooved at one plain end" selection basis.
Added a new gasket requirement, "Gasket is not required for lined, flanged joints, but is required at unlined spec boundaries, including
nozzles."
Added BranchReinforcementType worksheet.
Added 1210 and 1220 codelists for piping commodity sub class.
Removed "Derived" StructFootingCompSizingRule.
Added StructPositionRuleClass with a code list value of 505.
Added GeometricConstructionItem with a code list value of 510.
Added new Codelist values 206, 207, 208, 209, 210, 211, 212, and 213 to SelectionBasis sheet.
Added 2 new Property Categories, "Corporate Load Data" and "Nuclear Load Data."
Added .BranchFittingPlacementType worksheet.
Added HVACCrosssectionOverrideOpt worksheet.
Added HVACRunChangeAtCSChangeOpt worksheet.
Added 1 new Part Class Types for MHE, "BeltTypeClass."
Added 4 new Part Class Types for Trenches, "TrenchTypeClass," "TrenchCompositionClass," TrenchTurnPartClass," and
"TrenchCrossSectionClass."
Workflow to implement changes
Copy the JointRequirement worksheet from the 2014 All Codeslist workbook
and paste it into the 2011R1 All Codelist workbook. Add an 'A' in
column A for all rows in the pasted sheet. Bulkload in Add, Modify, Delete
mode.
Copy rows 46 and 47 from the 2014 All Codelist SelectionBasis worksheet and
paste the rows into the 2011R1 workbook. Add an 'A' in column A for those rows. Bulkload in Add, Modify,
Delete mode.
Copy rows 46 and 47 from the 2014 All Codelist SelectionBasisperPCF
worksheet and paste the rows into the 2011R1 workbook. Add an 'A' in
column A for those rows. Bulkload in Add, Modify, Delete mode.
Copy the BoltLengthRoundOffBasis worksheet from the 2014 All Codeslist workbook and paste it into the 2011R1
All Codelist workbook. Add an 'A' in column A for all rows in the pasted
sheet. Bulkload in Add, Modify, Delete mode.
Copy row 8 from the GasketRequirementOverride worksheet
from the 2014 and paste the row into the 2011R1 worksheet. Add an 'A' in
column A for that row. Bulkload in Add, Modify, Delete mode.
Copy the BranchReinforcementType worksheet from the 2014 All Codeslist
and paste it into the 2011R1 All Codelist workbook. Add an 'A' in
column A for all rows in the pasted sheet. Bulkload in Add, Modify, Delete
mode.
Copy rows 1127-1130 and 1131-1135 from the 2014 All Codelist
PipingCommodityType worksheet and paste those rows under the Branch
Fittings piping commodity class in the 2011R1 PipingCommodityType
worksheet. Add an 'A' in column A for these rows. Bulkload in Add, Modify,
Delete mode.
Copy rows 48-55 from the 2014 All Codelist SelectionBasis worksheet and
paste those rows in the 2011R1 worksheet. Add an 'A' in column A for these rows. Bulkload in Add, Modify,
Delete mode.
Add a 'D' in column A for row 5 in the 2011R1 worksheet. Bulkload in Add,
Modify, Delete mode.
Copy row 53 from the 2014 All Codelist PartClassTypes worksheet and paste
that row in the 2011R1 worksheet. Add an 'A' in column A for this row. Bulkload
in Add, Modify, Delete mode.
Copy row 54 from the 2014 All Codelist PartClassTypes worksheet and paste
that row in the 2011R1 worksheet. Add an 'A' in column A for this row. Bulkload
in Add, Modify, Delete mode.
Copy rows 91 and 92 from the 2014 All Codelist PropertyCategories worksheet and paste those rows in the 2011R1 worksheet. Add an 'A' in column A for these rows. Bulkload in Add, Modify,
Delete mode.
Copy rows 99-102 from the 2014 All Codelist PartClassTypes worksheet and paste those rows in the 2011R1
worksheet. Add an 'A' in column A for these rows. Bulkload in Add, Modify,
Delete mode.
Copy the BranchFittingPlacementType worksheet from the 2014 All Codeslist and paste the rows into the 2011R1 workbook. Add an 'A' in column A for
rows 5 and 6. Bulkload in Add, Modify, Delete mode.
Copy the HVACCrosssectionOverrideOpt
worksheet from the 2014 All Codeslist and paste the rows into the 2011R1 workbook. Add an 'A' in column A for
rows 5 and 6. Bulkload in Add, Modify, Delete mode.
Copy the HVACRunChangeAtCSChangeOpt
worksheet from the 2014 All Codeslist and paste the rows into the 2011R1 workbook. Add an 'A' in column A for
rows 5 and 6. Bulkload in Add, Modify, Delete mode.
Copy row 103 from the 2014 All Codelist PartClassTypes worksheet and paste that row in the 2011R1
worksheet. Add an 'A' in column A for this row. Bulkload in Add, Modify,
Copy Column DU, FormDefintion, from 2014 hsS3D_UFrameL and paste the column into
the 2011R1 worksheet after the "changesIJHgrBOMDefinition::BOMDefinition" column. Add an 'M' in column A for every row.
Bulkload in Add, Modify, Delete mode.
Copy Columns K and L from 2014 hsS3D_UFrameW and paste the columns into
the 2011R1 worksheet after the "IJUAhsIncludeInsulation::IncludeInsulation" column. Add an 'M' in column A in all rows.
Bulkload in Add, Modify, Delete mode.
No AMD required; these changes will be made when bulkloading.
Copy Columns U row 2 from the 2014 worksheet and paste into the 2011R1
worksheet after "oa:IJUAhsFrameLength2::Length2Value."
Copy Columns DV from 2014 worksheet and paste into the 2011R1 worksheet after newly added "FormDefinition" column. Add an 'M' in column A in all rows. Bulkload in Add, Modify,
Delete mode.
Copy Column BZ, FormDefintion, from 2014 RichHgrAisc31_W and paste the column into
the 2011R1 worksheet after the "IJHgrBOMDefinition::BOMType" column. Add
an 'M' in column A in every row. Bulkload in Add, Modify, Delete mode.
Copy the symbol defintion (column C row 7) from every worksheet in the 2014 workbook, and paste the new symbol definitions into the 2011R1 workbook in the appropriate sheets.
Add an 'A' in column A on every row for every worksheet. Bulkload in Add, Modify, Delete
mode.
No AMD required; these changes will be made when bulkloading.
Copy row 23-26 from 2014 hsSupCatalog and paste them into the 2011R1 worksheet. Add
an 'A' in column A in the pasted rows. Bulkload in Add, Modify, Delete mode.
Copy row 8-22 from 2014 hsSteelStandard and paste them into the 2011R1 worksheet. Add an 'A' in column A in the pasted rows.
Bulkload in Add, Modify, Delete mode.
Add an 'A' in column A for every row in the 2014 workbook. Bulkload in Add, Modify,
Delete mode.
Copy column AG from 2014 BP_ClevisWithPen worksheet, and paste into
2011 worksheet in front of column "IJUAhsPin1::Pin1Diameter." Add an 'M' in column A in rows 11-21. Bulkload in Add,
Modify, Delete mode.
On the Index Page under "struts," every part class name with "StrutB" in it gets 2 new
attributes added under the general section for reporting purposes. For each part number insert a "2" for both of the new attributes.
Then add an 'M' in column A to all affected rows. Bulkload in Add, Modify, Delete mode.
The part desciption has changed for every part class name with "StrutA" in it. The part
description is modified to no loger contain the "A" in "StrutA." Add an 'M' in column A to all
affected rows. Bulkload in Add, Modify, Delete mode.
Copy the new symbol definitons for each part classs from the 2014 worksheets and paste into the corresponding 2011R1 worksheets. Add an 'M' in column A to every row in the
workbooks. Bulkload in Add, Modify, Delete mode.
Copy BP_UnislideCradle sheet from 2014 and inserted it into the 2011R1
HS_S3DParts_BergenPowerNF09.3 workbook. Add an 'A' to every row on the
sheet. Bulkload in Add, Modify, Delete mode.
Copy BP_UnislideCradle_Ld sheet from 2014 and inserted it into the 2011R1
HS_S3DParts_BergenPowerNF09.3 workbook. Add an 'A' to every row on the
sheet. Bulkload in Add, Modify, Delete mode.
Copy rows 33-37 from the 2014 BPShape_Shoe worsheet and paste them at the bottom of the 2011R1 BPShape_Shoe worksheet. Add an 'A' to every pasted row.
Bulkload in Add, Modify, Delete mode.
Copy rows 25-38 from the 2014 BPShape_EndPlate worsheet and paste them
at the bottom of the 2011R1 BPShape_EndPlate worksheet. Add an 'A' to every pasted row. Bulkload in Add, Modify,
Delete mode.
Copy row 224 from the 2014 R-ClassNodeDescribes worsheet and paste it at
the bottom of the 2011R1 R-ClassNodeDescribes worksheet. Add an 'A' to
the pasted row. Bulkload in Add, Modify, Delete mode.
Copy the last eight rows from each constant spring sheet (see the list under constant
springs on the index) from the 2014 HS_S3DParts_BergenPowerNF09.3 workbook and paste the rows on the
appropriate sheets in the 2011R1 workbook. Add an 'A' to all of the pasted rows. Bulkload
in Add, Modify, Delete mode.
The S3Dhs_AdjRigidStrutB worksheet gets 2 new attributes added under the general
section for reporting purposes. For each part number insert a "2" for both of the new attributes. Add an 'M' in column A to all
affected rows. Bulkload in Add, Modify, Delete mode.
The part desciption has changed for every part class name with "StrutA" in it. The part
description is modified to no loger contain the "A" in "StrutA." Add an 'M' in column A to all
affected rows. Bulkload in Add, Modify, Delete mode.
Copy the new symbol Definitons for each part class from the 2014 worksheets and paste into the 2011R1 worksheets. Add an 'M' in
column A to every row in the workbook Bulkload in Add, Modify, Delete mode.
No AMD required; these changes will be made when bulkloading.
Copy the new symbol definitons for each part class form the 2014 worksheets and paste into the 2011R1 worksheets. Add an 'M' in
column A to every row in the workbook Bulkload in Add, Modify, Delete mode.
Copy the new symbol definitons for each of the specified worksheets form the 2014 worksheets and paste into the 2011R1
worksheets. Add an 'M' in column A to every row in the workbook Bulkload in Add, Modify,
Delete mode.
Copy the new symbol definitons for each part classs form the 2014 worksheets and paste into the 2011R1 worksheets. Add an 'M' in
column A to every row in the workbook Bulkload in Add, Modify, Delete mode.
Copy the new symbol definitons for each part classs form the 2014 worksheets and paste into the 2011R1 worksheets. Add an 'M' in
column A to every row in the workbook Bulkload in Add, Modify, Delete mode.
Copy the new symbol definitons for each of the specified worksheets form the 2014 worksheets and paste into the 2011R1
worksheets. Add an 'M' in column A to every row in the workbook Bulkload in Add, Modify,
Delete mode.
Copy the new symbol definitons for each part classs form the 2014 worksheets and paste into the 2011R1 worksheets. Add an 'M' in
column A to every row in the workbook Bulkload in Add, Modify, Delete mode.
No AMD required; these changes will be made when bulkloading.
Copy the new symbol definitons for each part classs form the 2014 worksheets and paste into the 2011R1 worksheets. Add an 'M' in
column A to every row in the workbook Bulkload in Add, Modify, Delete mode.
Copy column P row 7 from 2014 worksheet and paste into the 2011R1 worksheet after
"oa:IJUAHgrDrawingTemplate::DrawingTemplate." Add an 'M' in column A in all rows. Bulkload in Add, Modify, Delete mode.
Copy column AR row 10 from 2014 worksheet and paste into the 2011R1 worksheet after
"IJUAHgrDrawingTemplate::DrawingTemplate." Add an 'M' in column A in all rows. Bulkload
in Add, Modify, Delete mode.
No AMD required; these changes will be made when bulkloading.
No AMD required; these changes will be made when bulkloading.
Hvac
Number Description Worksheet(s) Applicable Workbooks
Copy row 12 from the 2014 PipeMfgRules worksheet and paste the row in the 2011R1 worksheet. Add an 'A' to the row. Bulkload in Add, Modify,
Delete mode.
Copy row 13 from the 2014 PipeMfgRules worksheet and paste the row in the 2011R1 worksheet. Add an 'A' to the row. Bulkload in Add, Modify,
Delete mode.
Copy the RuleProgID from the 2014 IFCPostProcessorRule worksheet and paste it in the 2011R1 worksheet. Add an 'A' to the row with the new ProgID. Bulkload in Add, Modify, Delete mode.
Copy rows 171-179 from the 2014 NamingRulesworksheet and paste
those rows in the 2011R1 NamingRules worksheet. Add an 'A' in column A for these rows. Bulkload in
Add, Modify, Delete mode.
Copy the ProIDs from rows 58, 61, 64, 67, 89, 92, 97, 100, 164, and 170 from the 2014 NamingRulesworksheet and paste them into the appropriate fields
in the 2011R1 NamingRules worksheet. Add an 'M' in column A for these rows. Bulkload in Add, Modify,
Delete mode.
Reports Number Description
145177 Added new SmartPlant Material report templates
145177 Added new SmartPlant Material report templates
145177 Added new SmartPlant Material report templates
192519 Added NPD Compatibility Exceptions rule
192519 Added NPD Compatibility Exceptions rule
210906 Added Bolt Length Lookup Rule
210906 Added Bolt Length Lookup Rule
211002 Added new SmartPlant Review Reference3D labels
Reference Data Changes (Version 2011 R1 to 2014)
211002 Added new SmartPlant Review Reference3D labels
Copy row 32 from the 2014 ClassNodeType worksheet and paste it under the appropriate header in the 2011R1
ClassNodeType worksheet. Add an 'A' to the pasted row. Bulkload in Add, Modify, Delete mode.
Copy rows 778-782 from the 2014 Reports worksheet and paste them under the appropriate headers in the 2011R1 reports worksheet. Add an 'A' to every pasted
row. Bulkload in Add, Modify, Delete mode.
Copy rows 785-788 from the 2014 R-Hierarchy worksheet and paste them under the appropriate
headers in the 2011R1 R-Hierarchy worksheet. Add an 'A' to every pasted row. Bulkload in Add, Modify, Delete
mode.
Copy row 551 from the 2014 Reports worksheet and paste it under the appropriate header in the 2011R1
reports worksheet. Add an 'A' to the pasted row. Bulkload in Add, Modify, Delete mode.
Copy row 572 from the 2014 R-Hierarchy worksheet and paste it under the appropriate header in the 2011R1
R-Hierarchy worksheet. Add an 'A' to the pasted row. Bulkload in Add, Modify, Delete mode.
Copy row 533 from the 2014 Reports worksheet and paste it under the appropriate header in the 2011R1
reports worksheet. Add an 'A' to the pasted row. Bulkload in Add, Modify, Delete mode.
Copy row 554 from the 2014 R-Hierarchy worksheet and paste it under the appropriate header in the 2011R1
R-Hierarchy worksheet. Add an 'A' to the pasted row. Bulkload in Add, Modify, Delete mode.
Copy rows 797-799 and 1050 from the 2014 Reports worksheet and paste them under the appropriate
headers in the 2011R1 reports worksheet. Add an 'A' to every pasted row. Bulkload in Add, Modify, Delete
mode.
Added 4 new relationships.
Added 1 new ClassNodeType.
Added 2 new report.
Added 3 new relationships.
Copy rows 830-832 and 1065 from the 2014 R-Hierarchy worksheet and paste them under the appropriate headers in the 2011R1 R-Hierarchy
worksheet. Add an 'A' to every pasted row. Bulkload in Add, Modify, Delete mode.
Copy row 63 from the 2014 ClassNodeType worksheet and paste it under the appropriate header in the 2011R1
ClassNodeType worksheet. Add an 'A' to the pasted row. Bulkload in Add, Modify, Delete mode.
Copy rows 774-776 from the 2014 Reports worksheet and paste them under the appropriate header in the 2011R1 reports worksheet. Add an 'A' to the pasted
rows. Bulkload in Add, Modify, Delete mode.
Copy rows 30, 41, and 42 from the 2014 R-Hierarchy worksheet and paste them under the appropriate header in the 2011R1 R-Hierarchy worksheet. Add an 'A' to the
pasted rows. Bulkload in Add, Modify, Delete mode.
Structure
Number Description
173426
212518 Modified sizing rule
208602, 223635 Added Align frame connections
215579, 216066 Added Tangent frame connections
213895 Added new codelist
Reference Data Changes (Version 2011 R1 to 2014)
Modified partclasses to inable the ability to set the bottom elevation of a footing by elevation value
Added two new attributes, "OA:IJStructElevationDatum::Use
ElevationDatum" and "OA:IJStructElevationDatum::Botto
mElevation"
Copy column M row 4 and column N row 4 from the 2014 worksheets and paste them into the 2011R1
worksheets after "OA:IJGenericVolume::Volume." Add an 'M' in column A for that row. Bulkload in Add, Modify,
Delete mode.
Changed sizing rule to Clearance (2) since sizing rule Derived (1)
has been removed.
Change the values for the GroutSizingRule and PierSizingRule for every entry in each spreadsheet list to 2. Add an 'M' to every row. Bulkload in Add, Modify,
Delete mode.
Added new "Align" frame connection
Copy the Align worksheet from the 2014R1 StructFrameConnections workbook and paste it into the 2011R1 StructFrameConnections workbook. Add an 'A' to every row in that spreadsheet. Copy line 22 from the
2014 R-Hierarchy worsksheet and paste it into the 2011R1 R-Hierarchy worksheet. Add an 'A' to that row
in the spreadsheet. Bulkload in Add, Modify, Delete mode.
Added new "Tangent" frame connection
Copy the Tangent worksheet from the 2014R1 StructFrameConnections workbook and paste it into the 2011R1 StructFrameConnections workbook. Add an 'A' to every row in that spreadsheet.Copy line 21 from the
2014 R-Hierarchy worsksheet and paste it into the 2011R1 R-Hierarchy worksheet. Add an 'A' to that row in the spreadsheet. Bulkload in Add, Modify, Delete
mode.
Added new "StructAlignTo" codelist
Copy the StructAlignTo worksheet from the 2014R1 StructCustomCodeList workbook and paste it into the
2011R1 StructCustomCodeList workbook. Add an 'A' to every row in that spreadsheet. Bulkload in Add, Modify,
Delete mode.
Added 22 new GUIDs
Added new "StructAlignWith," "StructAlignOrient," and
"StructAlignSideJustification" codelists
Copy the StructAlignWith, StructAlignOrient, and the StructAlignSideJustification worksheets from the
2014R1 StructCustomCodeList workbook and paste them into the 2011R1 StructCustomCodeList workbook. Add an 'A' to every row in each spreadsheet. Bulkload
in Add, Modify, Delete mode.
No AMD required; these changes will be made when bulkloading.
Functionality Workbook
AllCodelists.xls
AllCodelists.xls
New HS Frame Supports HS_S3DAssy_Codelist.xls
HS_S3DAssy.xls
HS_System.xls
New Hanger Riser Assembly HS_S3DAssy.xls
Ability to Approve Inconsistencies between SP3D and PID
Ability to report additional pipe length for reinforcing pad fabrication
…\Bulkload\SampleDataFiles\Sample data Reportable Piping Commodity Basis Reducing Fittings.xls
HS_S3DParts.xls
hsRiserLugSide
Reports.xlsNew labels and reports for S3D-SPR direct integration
Worksheet Change Implemented
EFWCorrelationApprovalStatus New codelist
RptPipingCommodityBasis New codelist
All New sample workbook
hsSelection Add new codelist
hsS3D_Tframe New worksheet for T Shaped Frame support
hsS3D_TFrame_Welds New worksheet for T Shaped Frame support
hsS3D_Lframe New worksheet for L Shaped Frame support
hsS3D_LFrame_Welds New worksheet for L Shaped Frame support
hsS3D_LVFrame New worksheet for L Shaped Frame support
hsS3D_LVFrame_Welds New worksheet for L Shaped Frame support
hsS3D_Iframe New worksheet for I Shaped Frame support
hsS3D_IFrame_Welds New worksheet for I Shaped Frame support
Add to Hierarchy
HgrSteelTypes Add W Steel Shape
CustomInterfaces New entries for Riser SmartParts
hsS3DStrut New worksheet for Riser SmartParts
hsS3D_Strut_Riser New worksheet for Riser SmartParts
Add to Hierarchy
ClassNodeType, R-ClassNodeDescribes, R-Hierarchy
ClassNodeType, R-ClassNodeDescribes, R-Hierarchy
CustomInterfaces New entries for Stopper
S3Dhs_Stopper
R-ClassNodeDescribes Add to Hierarchy
HS_S3DAssy_Codelist.xls Add new codelist
ClassNodeType, R-Hierarchy, Report New entries for SPR labels and reports
New worksheet for Stopper for Riser Strut Assembly
JTS Item Delta File?
120540
200712
200712
179004
179005 1_AMD_Delta_2011_2011R1_HS_S3DAssy.xls
179005 1_AMD_Delta_2011_2011R1_HS_S3DAssy.xls
179004 1_AMD_Delta_2011_2011R1_HS_S3DAssy.xls
179004 1_AMD_Delta_2011_2011R1_HS_S3DAssy.xls
179004 1_AMD_Delta_2011_2011R1_HS_S3DAssy.xls
179004 1_AMD_Delta_2011_2011R1_HS_S3DAssy.xls
179007 1_AMD_Delta_2011_2011R1_HS_S3DAssy.xls
179007 1_AMD_Delta_2011_2011R1_HS_S3DAssy.xls
1_AMD_Delta_2011_2011R1_HS_S3DAssy.xls
179004 1_AMD_Delta_2011_2011R1_HS_System.xls
203615 1_AMD_Delta_2011_2011R1_HS_S3DAssy.xls
203615 1_AMD_Delta_2011_2011R1_HS_S3DAssy.xls
203615 1_AMD_Delta_2011_2011R1_HS_S3DAssy.xls
203615 1_AMD_Delta_2011_2011R1_HS_S3DAssy.xls
179004, 179005, 179007
Indicates if Delta file is delivered with SP3D 2011R1
F1
Indicates if Delta file is delivered with SP3D 2011R1
203615 1_AMD_Delta_2011_2011R1_HS_S3DParts.xls
203615 1_AMD_Delta_2011_2011R1_HS_S3DParts.xls
203615 1_AMD_Delta_2011_2011R1_HS_S3DParts.xls
203615
200990 1_AMD_Delta_2011_2011R1_Reports.xls
AllCodeLists
Number Description
Add many new values
120540 Created new worksheet
200712 Created new worksheet
Add new entry for Maintenance Volume
Reference Data Changes (Version 2011 SP1 to 2011 R1)
203519 and others
AllCodeLists
Worksheet(s)
EquipmentTypes AllCodeLists.xls
EFWCorrelationApprovalStatus AllCodeLists.xls
RptPipingCommodityBasis AllCodeLists.xls
PropertyCategories AllCodeLists.xls
Reference Data Changes (Version 2011 SP1 to 2011 R1)
Applicable Workbooks
Geometric Number Description
175900, 201553 New workbook
202123, 204906 Added SurfaceBodyExtractor
Added CSAsRoot and SurfReorientate
New workbook
New workbook
New workbook
Reference Data Changes (Version 2011 SP1 to Version 2011 R1)
GeometricWorksheet(s) Applicable Workbooks
All
All GCGeomCmds.xls
All GCToolDefs.xls
All
Reference Data Changes (Version 2011 SP1 to Version 2011 R1)
Add .NET symbol and rules for Hanger parts and assemblies
Add report for Designed Handrails
Worksheet Change Implemented JTS Item
CustomInterfaces Add IJUASPSSplitByPoint interface 129985SplitByPoint New worksheetR-Hierarchy Add SplitByPoint to hierarchy
EccentricCone New worksheet
Add to hierarchy
InsulationData.xls 168586
BoltRequisitionClassification New codelist 168589BoltThreadDesignation New codelist 168589
BoltPartData 168589
GasketPartData
Add property MaterialsMgmtIDENT
HgrDisciplneFilter 169248
FootingGroutPad New part entryFootingPier New part entryFootingSlab New part entryPierAndSlabFooting New part entryPierAndSlabFootingAsm New part entry
141297, 174137
ClassNodeType, R-Hierarchy, R-ClassNodeDescribes
Add properties InsulationClassDescription and HeatTracingMedium
S3Dhs_YokeClamp New worksheet for YokeClamp SmartPart 178384
S3Dhs_ConstantTypeA 178385
S3Dhs_ConstantTypeB 178385
S3Dhs_ConstantTypeC 178385
S3Dhs_ConstantTypeD 178385
S3Dhs_ConstantTypeE 178385
S3Dhs_ConstantTypeF 178385
S3Dhs_ConstantTypeG 178385
S3Dhs_ConstantTypeU 178385S3Dhs_Shoe New worksheet for Shoe SmartPart 178386S3DhsShape_Clamp New worksheet for Shoe SmartPart 178386S3DhsShape_Shoe New worksheet for Shoe SmartPart 178386
S3Dhs_VariableType* 178387
S3DhsShape_Column 178387S3Dhs_SwivelRing New worksheet for SwivelRing SmartPart 178388S3Dhs_Shield New worksheet for Shield SmartPart 178390
S3Dhs_ProtectSaddle New worksheet for Protect Saddle SmartPart 179359S3Dhs_Pin New worksheet for Pin SmartPart 183883S3Dhs_ConnPlate1hole New worksheet for Plate SmartPart 185439S3Dhs_ConnPlate1hole New worksheet for Plate SmartPart 185439
S3Dhs_BlockClamp New worksheet for Block Clamp SmartPart 185677
New worksheet for Adjustable Clevis Hanger SmarPart
New worksheet for Welded Beam Attachment, Inverted, Rod Connection in Hole
New worksheet for Constant Spring SmartPart
New worksheet for Constant Spring SmartPart
New worksheet for Constant Spring SmartPart
New worksheet for Constant Spring SmartPart
New worksheet for Constant Spring SmartPart
New worksheet for Constant Spring SmartPart
New worksheet for Constant Spring SmartPart
New worksheet for Constant Spring SmartPart
New worksheet for Variable Spring SmartPart
New worksheet for Variable Spring SmartPart
S3DShape_Plate New worksheet for Plate shape 185677S3Dhs_SlidePlate New worksheet for Slide Plate Smartpart 185678
S3Dhs_BeamClamp New worksheet for Beam Clamp SmartPart 190402S3DhsShape_BeamClip New worksheet for Beam Clip shape 190402
S3Dhs_MalleableBeamCl 192190S3Dhs_ElbowLug New worksheet for Elbow Lug SmartPart 198853
hsSimpShapeType 178383
hsWBAHoleConfig 178383hsConstantAlignment New codelist for Constant Spring 178385hsConstantConfig New codelist for Constant Spring 178385hsConstantSuspension New codelist for Constant Spring 178385hsExtensionType New codelist for Shoe 178386hsShoeType New codelist for Shoe 178386hsSmartShapeType New codelist for Shoe 178386hsSpringMovementDir New codelist for Variable Spring 178387hsSmartShapeType New codelist for Plate shape 185677hsVertHoriz New codelist for Slide Plate 185678hsBeamClampBotShape New codelist for Beam Clamp 190402hsClipShape New codelist for Beam Clamp 190402hsSmartShapeType New codelist for Beam Clamp 190402hsMalleableConfig New codelist for Malleable Beam Clamp 192190hsLugShape New codelist for Elbow Lug 198853
HgrBOMRules Add new rules for Smart Parts 178387
All (New) 179003
All (New) 179004
hsFrameType Added entry for U Shaped Frame Support 179003hsFrameType Added entry for L Shaped Frame Support 179004
158913 Modified to add "DrawingTemplate" to all pipe assemblies158913 Added new codelist hsSupCatalog
158913
Modified to add "DrawingTemplate" Property to Design supports
162192 Corrected connection problems for Lisega and Utility parts
167082 Ability to attach washer to rod
169248 Ability to add supports to Circular and Curved pipe configurations
171786
Commented out the entry for CLASSNODE_PARTS_MISC
172042 Added Path for Symbol Icons
175138 Corrected problem with Reference Port Support for vertical pipe
176890 Add Standard Hexagon Bolts
177996
178382 Added Part class sheet for Adjustable Clevis Hanger
178383
178383
178384 Added Part class sheet for YokeClamp
178385 Added new sheets to the workbook
Reference Data Changes (Version 2009.1 to Version 2011 SP1)
Add PrimarySideActualLegLength and SecondarySideActualLegLength attributes to IJWeldingSymbol
interface
Added hsSimpShapeType, hsWBAHoleConfig sheets to the workbook
Added Part class sheet for Welded Beam Attachment, Inverted, Rod Connection in Hole
178385
178386
178386
178387 Added new rules for Smart Parts178387 Added hsSpringMovementDir sheet to the workbook
178387
178388 Added Part class sheet for SwivelRing
178390 Added Part class sheet for Shield
178919
Move Smart Steel to Deprecated folder of Catalog Hierarchy
179003Create workbook for U Shaped Frame Assembly
179004
Create workbook for L Shaped Frame Support179004 Create codelist workbook for L Shaped Frame Support
179180 Modified the MaterialType from Air to Steel - Carbon
179180 Modified the MaterialType from Air to Steel - Carbon
179359Added Part class sheet for Protect Saddle
180325 Modified to add "RulePriority" attribute to all the assemblies
Added new part class sheets and Service Classes required for Constant Spring SmartPart
Added new row in hsSmartShapeType and added hsShoeType, hsExtensionType sheets to the workbook
Added new part class sheets and Service Classes required for Shoe SmartPart
Added new part class sheets and Service Classes required for Variable Spring SmartPart
180758
181360 Added new rule to skip port connection check
181574
181603Added new interface IJUAHgrWeld and weld attributes
181603 Added new interface IJUAHgrWeld and weld attributes
181753 Modfied R, HOLE_DIA, OVER dimensions values
183883 Added Hs_Pin SmartPart
184251
184251
185439 Added new sheets for new Plate SmartPart.
185440Add Bergen Power SmartParts
185677 Added hsSmartShapeType sheet to the workbook
185677
185678 Added hsVertHoriz sheet to the workbook
185678 Added Part class sheet for Slide Plate
185883 Corrected the data for 'S' and 'I_TRANS' attributes
186027
Modified the Command Type to reflect new HgrCmdType Enum , Which Enables Placement of Supports By HgrReference Point
Cmd
Changes made for Port Types, Size and Port Location. Also changed SymbolIcon path for Clevis with Pin.
Added new interface IJUAhsSteelStd and used this interface instead of IJUAhsCatalog
Added new interface IJUAhsSteelStd and used this interface instead of IJUAhsCatalog
Added Part class sheet for Block Clamp and Service Class for Plate Shape
Added new attributes for U-Bolt SmartPart, modified port type and sizes for Yoke Clamp and Dry Weight Data has been modified for
some of the part classes
189117
Modified to allow droppingt of Std Support placed by reference cmd
190402
190402
190404
191547 Add .NET symbol and rules to the default catalog
191547 Add .NET symbol and rules to the default catalog191547 Add .NET symbol and rules to the default catalog191581 Added SymbolIcon paths192190 Added hsMalleableConfig sheet in the workbook
192190
192671 Added entries for PSL supports
195064 Added new Interface for Shoe Clamp Angle Attribute195617 Added new codelist table hsBOMLenUnits
195617
195617
196227
Corrected MultiLocateBy value from '0' to '-1'
196228 Corrected Undefined value of MultiLocateBy value from '0' to '-1'
196535 Added RodDiameter property
197004 Added Port Type
197004 Removed the unused port details
Added new Elbow Lug Partclass
Added hsLugShape codelist
Added new row in hsSmartShapeType and added hsClipShape, hsBeamClampBotShape sheets to the workbook
Added Part class for Beam Clamp Smart Part and Service class for Beam Clip Shape.
Modified the Command Type to reflect new HgrCmdType Enum , Which Enables Placement of Supports By HgrReference Point
Cmd
Added Part class for Malleable Beam Clamp Smart Part and Service class Entries for EyeNut and Nut
Added new interface "IJUAhsUnits" and new service class "HgrSrv_BOMUnits"
Deleted "hsBOMLenUnits" sheet from this work book and added in theHS_System_Codelist.xls
198853, 198854
198853, 198854
Change Angle3 attribute to Occurrence Attribute
Change Angle3 attribute to Occurrence Attribute
197162, 200025
197162, 200025
Hangers and SupportsWorksheet(s)
Several SheetshsSupCatalog
SupportJoints
SupportJoints
HgrDisciplneFilter
R-Hierarchy
All
Assy_RefPorts, Assy_BBX
S3Dhs_HexBolt
CustomInterfaces, S3Dhs_WeldPoint, S3Dhs_WeldRect
S3Dhs_ClevisHanger
hsSimpShapeType and hsWBAHoleConfig
S3Dhs_WBAInverted
S3Dhs_YokeClamp
Reference Data Changes (Version 2009.1 to Version 2011 SP1)
144080 Deliver GCDefs under GeometricConstructions
Reference Data Changes (Version 2007 to Version 2009 SP1)
Deliver new file for Geometric Construction Definitions
GeometricWorksheet(s) Applicable Workbooks
All GeomGCDefs.xls
All
Reference Data Changes (Version 2007 to Version 2009 SP1)
GCMemberDefs.xls, GCParamDefs.xls, GCPortDefs.xls
Hangers and Supports Number Description111818 Cannot place beam clamp on 3in wide beam122642 Generic Brace is missing preview126215 Check content of new HgrPipeSupportParent rule on xls
128845
135149
136853 Assy_RR_LR uses pipe OD with insulation rather than pipe OD139339 Misspelling for DryWeight entry in HS_Anvil.xls
139574 Provide Catalog data for sample named AIR
141415 Strut components fail to place on pipe with metric units as primary
142372 Need Catalog data to add sample Generic Guide support
142517 Assy_RR_SR_CL_2 uses wrong rod size for 8 in pipe142526 Utility parts have wrong unit type
147104 Require Smart Steel and Smart Cutback Steel parts148288 Anvil_FIG201 (Option 3) strut fails to place on 6 in. pipe
149777 Utility Cutback steel missing Neutral Port
151463154101 Column Data missing in Hgr AISC steel
155253 Renamed workbook
Reference Data Changes (Version 2007 to Version 2009 SP1)
Need to provide sample support, VesselGuide, that connects to curved surfaces
Modify Assy_FR_UC_LS to provide sample support that connects to curved surfaces
"Ports are not compatible" error when two hanger beams connect end to end
Hangers and SupportsWorksheet(s) Applicable Workbooks