This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Part No. Desc. Engine Model/ Application Alternator
3e5459 BRuSH A 3306, 3116, 3126, 3196 1077977, 1214134
1P1130 BRuSH KIT d342, d353, 3406 6n9294
1275953 BRuSH 323d, 323dL, 3066 2724754
tErMINal COnneCTOR KITS
deutsch™ dt series
deutsch™ Hd20 series
deutsch™ dT are an environmentally-sealed connectors designed specifically for cable to cable applications. These connectors provide an excellent connection for signal level circuits in harsh environmental conditions, where even a small degradation in connection may be critical.
The deutsch™ Hd (Heavy duty) Connector series was developed with the heavy-duty equipment and off highway industry in mind. Hd Series connectors are a thermoplastic cylindrical coupling that offers arrangements from 3 to 9 cavities for heavy-duty applications. These connectors are easy to install, environmentally sealed and compact in size. The simplicity of the Hd Series Connectors help reduce assembly difficulty, maintenance time, and are built to meet industry standards to provide sustainability in demanding environments.
The CTP Terminal Connector Kits come conveniently packed in a special protective suitcase.
features Hd20
part No. 1908900
Number of pieces 236
durability no electrical or mechanical defects after 100 cycles of engagement or disengagement.
moisture & corrosion Resistance
Water does not penetrate seals when submerged in 3 feet of water. no evidence of corrosion after exposure to 48 hours of salt spray testing.
fluid Resistance Connector show no damage when exposed to most fluids used in industrial applications.
vibration Maintains continuity and exhibits no mechanical or physical damage during or while subject to vibration.
tipical applications High current high current connections such as solenoids, relays and switches.
† To ensure proper electrical performance, contact terminals must be crimped using crimping tool part No. 1u5804, which needs to be ordered separately. See page 154 for more information.
features Hd20
part No. 1753700
Number of pieces 386
durability no electrical or mechanical defects after 100 cycles of engagement or disengagement.
moisture & corrosion Resistance
Thermoplastic (-550 C to + 1250 C rated) housings and silicone seals allow the connector to withstand conditions of extreme temperature and moisture.
fluid ResistanceProperly wired and mated connection will withstand immersion under three feet of water without loss of electronic qualities or leakage.
vibration no unlocking or unmating and exhibits no mechanical or physical damage after vibration level testing
tipical applications The chassis, in the cab, under the hood, on the engine and the transmission.
deuTSCH™ is a trademark used by Te Connectivity family of companies.
cIrcuIt BReAKeRS
AMP Part No.
10 AMP 6T3642
15 AMP 3T2662
15 AMP 4K5124
15 AMP 6n8589
20 AMP 6T3644
40 AMP 5M2555
50 AMP 1712206
60 AMP 1712208
60 AMP 2V2380
60 AMP 6T3645
80 AMP 1712210
80 AMP 9S4693
90 AMP 1712211
105 AMP 1712212
105 AMP 3e7294
150 AMP 1712215
arMaturEsPart No. Application Voltage
0949885 3066, S6K -
3e7855 322B, 325C, 926G, 928G, 950G, 960F 24 VOLT
3T0867 12G, 120G, 215/B, 518, 936/e, 3204 24 VOLT
3T5425 769, 823, 834, 983, 988, d353, 1693 24 VOLT
4M1868 12e, 16G, 623B, 824C, 826C, 1673 24 VOLT
5L8877 12G, 920, 930, 941/B, 950/B, 951B/C 24 VOLT
7M8651 627, 637, 641B, 650B, 651B, 657B, 66B 24 VOLT
7T3275 3176B, 3176C, C-10, C-12 12 VOLT
7T3276 621e, 623e, d8n, G916, G926, 3204 24 VOLT
7x1951 322C, 325C, 543, 3116, 3126/B, M325B 24 VOLT
8S1546 235, 528, 627B/e, 814/B, 815/B, 816B 24 VOLT
9x1280 910e, 918F, 924F, 3114, CB-434, e1108 24 VOLT
terminals
ElEctrIcal TeRMInALS
terminals kitsPart No.
1S7252
1254785
1636790
2L8058
2L8065
2L8066
2L8067
2L8069
2L8071
Part No.
2L8075
2L8076
2L8077
2L8078
2L8079
3n1915
4S1988
5P4571
6K0613
Part No.
1409944†
3n3763
7n7807
7n7808
7T2804
9G7559
9S2012
9S2013
† The CTP electrical terminal kit part # 1409944 includes: The most popular electrical terminals, the splice wires and the crimping tool. All in only one box.
standard lightsPart No. Voltage Wattage Light Len. Size
CTPxe12V3x3 12V 35 watts xenon 3x3
CTPxe24V3x3 24V 35 watts xenon 3x3
CTPH12V5x5 12V 55 watts Halogen 5x5
CTPH24V5x5 24V 65 watts Halogen 5x5
CTPH12V3x3 12V 55 watts Halogen 3x3
CTPH24V3x3 24V 65 watts Halogen 3x3
Part No. Voltage
1054849 24V 75/70W
1054850 24V 75/70W
1058069 12V 55W
1068964 24V 65W
1074401 25V 5W
1074402 24V 21W
1622073 24V 21W
1717214 24V 65W
1729973 24V
1760780 24V
2129347 12V 55W
2142968 12V 55W
2196485 24V 55W
2196486 24V 70W
2196487 24V 70W
2344323 24V
2344324 24V 70W
2344329 12V 55W
2423514 24V 70W
2423519 24V 70W
3329402 24V 35W
Part No. Voltage
3e7586 24V
3e9382 12V 21W
4n9303 24V
5I8250 24V 65W
9x1439 24V 70W
9x6853 12V 55W
9x7169 24V
9x7170 24V
9x7779 12V 55W
9x8179 12V 55W
9x8180 12V 55W
lamp groups
lamps assembly kits
Part No. Description
1M1882 LAMP ASSy
4K8033 LAMP ASSy 24V
5C9029 LAMP A
Part No. Description
1074402 LAMP - SIGnAL 24V 21W
2026611 LenS AS
3e6466 LAMP - SIGnAL 24V 21W
7M7147 LAMP AS - STOP & TAIL
9x4174 LenS A
9x7797 LenS A
9x7798 LenS A
stop lamps and lenses
Part No. Bulb Voltage
3e75879x346510032459x4493
24V 70/75W24V 0.17AMP24V 21W
1071301 9W0607 12V 55W
1076689 9x3463 24V 70W
1428637 9W0607 12V 55W
1717213 9x3463 24V 35W
1760311 9W0607 12V 55W
1993137 3519918 24V 70W
2108423 2096638 21/24V 35W
2142969 9W0607 12V 55W
2196488 3519918 24V 70W
2255075 3519918 24V 70W
2905749 3519918 24V 70W
2908118 2908160 24V
Brand New lamps
spark PLuGSthe new design has been improved to provide better reliability:
ü design optimized to only one piece to prevent possible failures. ü Teflon boot was eliminated. ü Sealing glue and screw joint were removed. ü The pre-chamber comes with only one welding. ü It comes with a black oxidized shield to improve antirust performance.
SAe and ASAe ü High/Low Beam, Pilot light, turn signal
and repeater ü Available in left hand and right hand
traffic
Part No. Voltage
1M5898 24V
1M5899 24V
1M5928 24V
2M4168 12V
2M4169 12V
2P7469 n/A
5S5149 24V
6n7982 24V
6n7987 24V
8T8753 24V
9W1280 24V
9W1281 24V
sealed lamps lamp Bulbs
Part No.
1003245
2d1959
3519918
3e8825
3H2691
3n5719
5d0019
5M8034
7H2976
7n1996
7n5876
Part No.
7n9943
7n9967
7x2058
8d1429
8L9801
8T9749
9W0607
9x3465
9x4492
9x4493
WarNINg LIGHTS
Part No. Description Features
CdLS306-AWAmber/White Black Bezel
» Kit includes a snap-on polycarbonate bezel that will hide the screw heads for a clean install. » 25 customer selectable flash patterns,
including steady on » Maximum light output in a minimum
package » no need to install a separate flasher unit;
it’s built into this miniature housing » Lens has diffusing optics for wider
coverage » Circuitry is fully encapsulated within the
housing for vibration and water resistance » Interior/exterior mount » 10-30V dC voltage » 1.2 amps max = Amp draw
CdLS306C-AWAmber/White Chrome Bezel
CdLS306-AAAmber/Amber Black Bezel
spherical led Head
Note: CdLS306-AW/CdLS306C-AW/CdLS306-AA are all the same. The difference is the color of the lights & the bezel. A =Amber W=White C=Chrome bezel
amber led
features: ü Snap-on bezel ü 25 customer selectable flash patterns, including steady-on ü Versatile Led warning lights that are built with fully encapsulated circuitry ü Can be mounted just about anywhere, interior or exterior ü Optional mounting brackets are also available (need to place a special order)
Part No. Description Voltage Amp. Draw
CdLx3-A 3 Amber Flush Mount 10-16V dC 0.29 amps
CdLx4C-AW 4 Amber/White Flush Mount 10-30V dC 0.7 amps @ 12V dC
0.3 amps @ 24V dC
CdLx6-AA* 6 Amber 10-30V dC 0.9 amps @ 12V dC 0.5 amps @ 24V dC
* designed for braket mounting only. Incorporates a Heavy duty heat Sink
Part No. Description Features
CdLxT-121-AAAmber/ Amber Black Bezel
» Standard warning Led light » 21 customer selectable flash patterns,
including steady-on » Only ½” thick » Can be mounted just about anywhere,
interior or exterior » Amber/Amber and Amber/White split
colors » Built with fully encapsulated circuitry » Optional brackets are available (special
order required) » Voltage = 10-16V dC » Amp draw = 0.3 amps @ 12V dC
CdLxT-121C-AAAmber/Amber Chrome Bezel
CdLxT-121-AWAmber/White Black Bezel
CdLxT-121C-AWAmber/White Chrome Bezel
thin aux. led with Rectangular Bezel
Note: CdLxT-121-AA/CdLxT-121C-AA/CdLxT-121-AW/CdLxT-121C-AW are all the same. The difference is the color of the lights & the bezel. A=Amber W=White C=Chrome bezel
Description Part No. Features
Led PAR36 WHITe HAZARd TuRn
CLdHT362-T-C
• Clear lens• Swivel mount• Quick installation in any situation• 32 customer selectable flash patterns, including steady-on• Turn signal input • Trapezoidal• Voltage = 10-30V dC• Amp draw = 1.1 amps max
AMBeR HALOGen TeARdROP LIGHT
C1166HMA-24
• Aerodynamic light is ideal for unmarked cars or volunteers• Voltage = 24V dC• Cigarette plug with light on/off switch• Magnet mount
AMBeR PAnCAKe LIGHT WITH MAGneT MOunT
C1169HMA-24
• Low profile design, allows it to fit under sloping windshields with minimum obstruction and visibility
• Wide angle reflector for longer flash duration and brighter pulse• Voltage = 24V dC• Cigarette plug with light on/off switch• Magnet mount
AMBeR COnTOuR M-TeCH PLuS MInIBAR
C9100LedV-A
• extremely low profile, made to “contour fit” to the roof of your vehicle• Super bright Led technology• Provides a superior warning light image• Injection molded polycarbonate base is combined with two rubber coated vacuum magnets
to “custom mount to your vehicle” • 12” cigarette plug with lighted on/off and pattern select switch• 20 customer selectable flash patterns• 10-16V dC voltage• 2.3 amps max = Amps draw
LAMP GROuP
1081029
• Revolving light• Magnet mount• Voltage = 24V dC• Amp draw = 4.0 amps (50 watt)• Rugged die-cast aluminum base• enclosed bottom• Patented shock mounted rotators with two sealed roller bearings provide quiet, smooth, and
maintenance free operation• Lock-and stay bulbs are field replaceable• durable polycarbonate plastic outer domes keep our lights corrosion, weather, and impact
resistant
LAMP GROuP
2843757
• Led• Amber lens• durable, lightweight polycarbonate, universal flange base: three-hole permanent mount• 28 customer selectable flash patterns including steady-on• Fully encapsulated circuitry for weather and shock resistance• Interchangeable lens• Voltage = 10-30V dC• Amp draw = 0.4 amps @ 12V dC, 0.8 amps max
ctp linear actuators feature: ü die-cast aluminum power heads available in several gear ratios
able to handle loads up to 4000 lbs. ü Motor voltages include 12, 24, 36 Volt dC or 110 and 220 volt AC. ü Acme and ball screws are available. ü dynamic load capacity of 3000 lbs. ü Static load capacity 5000 lbs. ü Temperature Range: 90°C, 194°F Maximum to -35°C, -30°F Minimum.
features: ü Sealed for use in air or gas applications. ü Offset design for simple mounting ü Powerful motors üMultiple offset gear ratios: B = 2.18:1; C = 2.53:1; C = 2.69:1;
d = 3.44:1, d = 3.94:1; e = 3.46:1 ü Backcap ports for injection lubricating