REC.: 9/30/2014

tdent

Typewritten Text

REC.: 9/30/2014

tdent

Typewritten Text

tdent

Typewritten Text

tdent

Typewritten Text

tdent

Typewritten Text

tdent

Typewritten Text

tdent

Typewritten Text

CLIENT

JOB NUMBER

JOB NAME

PROJECT MANAGER

This custom design is the exclusive property ofSigns of Success. All rights to its use are restricted.

CLIENT ACCEPTANCEDrawings must be signed, dated and returned toSigns of Success to commence fabrication.

Approved By

Date

REVISIONS

Description Date

DRAWN BY

SCALE

DATE

PAGE

247 Merrick Road, Suite 101Lynbrook, NY 11563T: 516 823-9000F: 516 823-1023www.signs-of-success.com

URGENT: ATTENTION ELECTRICIANSSign Transformer requires that allcircuits must have dedicated hot,

neutral ground, terminating at panel.Questions: call 516.823.9000

SIGN MUST BE GROUNDED IN COMPLIANCE WITH ARTICLE 600OF THE NATIONAL ELECTRIC CODE.

CIRCUITS REQUIREDOne [ 1 ] 20 AMP120 VOLT circuit

dedicatedto sign ONLYREQUIRED

MORGAN STANLEY

14.0419

107 Centennial Street, LaPlata, MD

Thomas Lipski

Marisally Santiago

1" = 1' - 0"

25 September 2014 rev.3

1 of 4

new sign type 5.12.14new elev 9.25.14

*NOTE: Sign placement and sizes are preliminarysuggestions and are NOT necessarily exact orallowed by local municipal sign ordinances.

Exterior Corporate ID - SOUTH ELEVATION

116-13/32" wide

13" cap17-3/16"

13.9 SQ FT

see Sign Speci�cations[ page 2 ]

Satin White

Proposed south Elevation Detail @ NTSProposed south Elevation @ NTS

CL

24"space 13"

cap

66'-6"+2

6'-1

"

CLIENT

JOB NUMBER

JOB NAME

PROJECT MANAGER



Approved By

Date

REVISIONS

Description Date

DRAWN BY

SCALE

DATE

PAGE


URGENT: ATTENTION ELECTRICIANSSign Transformer requires that allcircuits must have dedicated hot,

neutral ground, terminating at panel.Questions: call 516.823.9000

SIGN MUST BE GROUNDED IN COMPLIANCE WITH ARTICLE 600OF THE NATIONAL ELECTRIC CODE.

CIRCUITS REQUIREDOne [ 1 ] 20 AMP120 VOLT circuit

dedicatedto sign ONLYREQUIRED

MORGAN STANLEY

14.0419


Thomas Lipski

Marisally Santiago

1" = 1' - 0"


2 of 4

rev location & qty 5.12.14

*NOTE: Sign placement, sizes and site conditionsare preliminary suggestions and areNOT necessarily exact or allowed by localmunicipal sign ordinances.

Exterior Corporate ID - SPECIFICATIONS

1/4" diameter Stud[ 4" long - minimum ]

Power Supplywith UL Listed Box

Primary Electrical Feed

Disconnect Switch

Existing Steel-CladBuilding Fascia

Ground Wire

.063 Fabricated Aluminum,painted Satin White Returns

.090 Aluminum FaceWelded to Return

Stainless SteelSheet Metal Screw (#8 x 1/2")

Painted to match Returns

Interior PaintedStar Bright White

Tented 1/4" Weep Holes

Sloan Exterior GradeWhite L.E.D.s

3/16" thick Clear Lexan Back

Strap tiesConduit Connection

to Letter Returns

Clips Pop-Riveted to Lexan Back

13.9 SQ FT

116-13/32" wide

13" cap17-3/16"

• Signage will be comprised of internally-illuminated fabricated channel letters.• Face of all components will be 3/16" thick translucent White acrylic. • Letter returns will be 3-1/2" deep, welded to letter backs.• Returns and 3/4" trim caps will be painted with White acrylic polyurethane.• All letters will be illuminated with Sloan exterior grade White L.E.D.s.

• Mounting studs will be a minimum of 4" long x 1/4" diameter non-ferrous threaded, with stainless steel washers.

• Transformers will be concealed, mounted behind the wall facade.• Primary electrical service and timing device to be provided by others; electrical feed (in weather-tight J-box) to be within 3 feet of the proposed sign area.• All wires and transformers will be hidden from view.• All signs will be U.L. listed and labeled [ at the lower left corner of each letter ].• Quantity: [ 1 ] sign

CLIENT

JOB NUMBER

JOB NAME

PROJECT MANAGER



Approved By

Date

REVISIONS

Description Date

DRAWN BY

SCALE

DATE

PAGE


MORGAN STANLEY

14.0419


Thomas Lipski

Marisally Santiago

3" = 1' - 0"


3 of 4

new sign type 9.25.14

*NOTE: Sign placement and sizes are preliminarysuggestions and are NOT necessarily exact orallowed by local municipal sign ordinances.

Exterior Plaques - NORTH EAST & EAST ELEVATIONS

24"

2-3/16"cap

2"

1"

12"

2.0 SQ FT, each

• Signage will be comprised of a Brass plaque with etched graphics.• Plaque will be 24" wide x 12" high x 1/4" thick Brass.• Face of plaque will have a polished finish.• Graphics will be etched into the face of the plaque and paint-filled Black.• Signage will be mounted to exterior brick surface with concealed studs.• Signage mounting centered left-to-right on columns Location A height will be per per existing Northeast entry plaque. Location B height will be 66" AFF to center• Quantity: [ 1 ] plaque

Location A Layout Location B Layout

24"

2-3/16"cap

2-21/32"

1"

12"

Proposed North East Elevation, Location A @ NTS Proposed East Elevation, Location B @ NTS

CL

CL

CLIENT

JOB NUMBER

JOB NAME

PROJECT MANAGER



Approved By

Date

REVISIONS

Description Date

DRAWN BY

SCALE

DATE

PAGE


MORGAN STANLEY

14.0419


Thomas Lipski

Marisally Santiago

1" = 1' - 0"


4 of 4

new loc plan 9.25.14

40'-0

"

Location Plan - EXTERIOR CORPORATE ID & DIRECTIONAL PLAQUES

= 13.9 SQ FT

= 2.0 SQ FT

= 2.0 SQ FT

= 17.9 SQ FT TOTAL

South ElevationCorporate ID

Location ADirectional Plaque

Location BDirectional Plaque

SOUTH

EAST

NORTH

66'-6"

38'-0

"

SOUTH

EAST

NORTH

REC.: 9/30/2014

Documents