Rebar We supply rebar of standard diameters and lengths; the rebar can be supplied in the form of high tensile or mild steel. Mild steel can be supplied as standard lengths for all diameters. Length 9m, 10m, 11m, 12m and 13m, or can be supplied as special lengths as per customer’s requirements, not exceeding 13m. Applicable Standards • SANS 282: 2011 - Bending dimensions and scheduling Bar Sizes Mild and High Tensile Rebar Diameter AREA mm2 MASS PER METRE kg/m 6 mm 28.3 0.222 8 mm 50.3 0.395 10 mm 78.5 0.617 12 mm 113 0.888 16 mm 201 1.58 20 mm 314 2.47 25 mm 491 3.85 32 mm 804 6.31 40 mm 1260 9.86 Mild Steel Diameter Coils Available Straights Available R6 R 8 R 10 R 12 R 16 R 20 R 25 R 32 Bloemfontein Tel: 051 435 2885 East London Tel: 043 736 2200 Cape Town Tel: 021 534 2541 Durban Tel: 031 792 5300 Wadeville Tel: 011 865 8100 Kimberley Tel: 053 841 0467 George Tel: 044 874 2308 Port Elizabeth Tel: 041 463 1220 Lesotho Tel: 00 266 22 326 395 Meyerton Tel: 016 362 0544 Paarl Tel: 021 862 3868 PolokwaneTel: 015 293 1920 Pietermaritzburg Tel: 033 346 1491 Richards Bay Tel: 035 797 3316 Namibia Tel: 00 264 61 262 117 • SANS 920:2011 - Steel bars for concrete reinforcement
4
Embed
Rebar - Steeledalesteeledale.com/wp-content/uploads/2017/11/Rebar_HQ.pdf · Rebar We supply rebar of standard diameters and lengths; the rebar can be supplied in the form of high
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Rebar
We supply rebar of standard diameters and lengths; the rebar can be supplied in the form of high tensile or mild steel.
Mild steel can be supplied as standard lengths for all diameters. Length 9m, 10m, 11m, 12m and 13m, or can be supplied as special lengths as per customer’s requirements, not exceeding 13m.
Applicable Standards• SANS 282: 2011 - Bending dimensions and scheduling
Bar Sizes
Mild and High Tensile RebarDiameter AREA mm2 MASS PER METRE kg/m
6 mm 28.3 0.222
8 mm 50.3 0.395
10 mm 78.5 0.617
12 mm 113 0.888
16 mm 201 1.58
20 mm 314 2.47
25 mm 491 3.85
32 mm 804 6.31
40 mm 1260 9.86
Mild Steel Diameter Coils Available Straights AvailableR6
• SANS 920:2011 - Steel bars for concrete reinforcement
Rebar
High Tensile Rebar
Physical Properties of Reinforcing Steel: Mild
Physical Properties of Reinforcing Steel: High Tensile
High Tensile Diameter Coils Available Straights AvailableY6
Y8
Y10
Y12
Y16
Y20
Y25
Y32
Y40
Yield stress 250 MPa (minimum)
Elongation 22 % minimum
Dimensions in millimetres1 2 3
Method of forming Length Tolerance
CuttingStraight lengths
(including reinforcement for subsequent bending)
± 25
Bending
< 1 000 mm ± 5
> 1000 < 2000 mm + 5- 10
> 2000 mm + 5- 25
Yield stress 450 MPa (minimum)
Tensile strength + 15 % greater than the yield stress
Elongation 14 % ( minimum )
Bend/ re-bend A bar to withstand, without fracture
High tensile rebar can be supplied as standard lengths. Length 12m and 13m, or can be supplied as special lengths as per customers’ requirements, not exceeding 13m.
Cutting and Bending Tolerances as per SANS 282:2011
Minimum hook, bending and radius allowances
For high yield stress steel bars and cold worked steel bars that comply with SANS 920:2011
For hot rolled mild steel bars that comply with SANS 920:2011
Bend allowance n 100 100 100 100 100 120 160 200 240
Radius r 12 16 20 24 32 40 50 64 80
Transportation
Shape codes
For convenience in transporting bars, dimensions should not exceed the following.
All shape codes are as per SANS 282:2011 specification.
NB: Shape code 99 shall be used for all other shape codes. A dimensioned sketch of the shape shall be shown in the client’s bending schedule as per engineer. Radii of all bends are standard unless r is given in the bending schedule.