7/28/2019 realtek Manual
1/47
Realtek HD Audio Manager
June 6, 2008
Copy Rights of Realtek Semiconductor 2008
7/28/2019 realtek Manual
2/47
Table of Contents
Table of Contents
GETTING STARTED .......................................................................................4
INTRODUCTION .............................................................................................5
1. JACK AND DEVICE.................................................................................6
1.1. Advanced Setting ......................................................................................................... 8
2. APPLICATION ENHANCEMENT........................................................... 11
2.1. Speaker Configuration.................................................................................................11
2.2. Sound Effects ............................................................................................................. 14
2.3. Microphone Effects..................................................................................................... 16
2.4. Room Correction ........................................................................................................ 19
2.5. DOLBY........................................................................................................................ 20
DOLBY HOME THEATER ................................................................................................... 20
DOLBY MASTER STUDIO.................................................................................................. 24
2.6. Default Format............................................................................................................ 32
3. INFORMATION.......................................................................................34
4. FAQ ........................................................................................................35
4.1. No Sound Output........................................................................................................ 35
4.2. No Sound When Resuming From S3/S4....................................................................37
4.3. Sound Output Suddenly Stops ...................................................................................37
4.4. HDMI........................................................................................................................... 38
4.5. How to Perform Multistreaming.................................................................................. 40
4.6. How to Use Stereo Mix Recording............................................................................. 41
4.7. Set Up Home Theater Environments.......................................................................... 43
4.8. What Is Default Device............................................................................................... 45
4.9. Configure Rear Three J acks As Multiple Channel......................................................46
Realtek HD Audio Manager2
7/28/2019 realtek Manual
3/47
Figure Index
Figure Index
Figure 1.1-1 Set Default Device........................................................................................ 8
Figure 1.1-2 Device Advanced Settings............................................................................ 9
Figure 2.1-1 7.1 Speaker Setup.......................................................................................11
Figure 2.1-2 Stereo Speaker Setup................................................................................13
Figure 2.2-1 Sound Effects ............................................................................................. 14
Figure 2.2-2 karaoke mode.............................................................................................15
Figure 2.3-1 Microphone Effects.....................................................................................16
Figure 2.4-1 Room Correction........................................................................................ 19
Figure 2.5-1 Dolby Virtual Speaker in Dolby Home Theater........................................... 20
Figure 2.5-2 Dolby Headphone in Dolby Home Theater................................................. 21
Figure 2.5-3 Dolby Pro Logic II in Dolby Home Theater................................................. 22
Figure 2.5-4 Dolby Digital Live in Dolby Home Theater.................................................. 23
Figure 2.5-5 Dolby Virtual Speaker in Dolby Master Studio............................................ 24
Figure 2.5-6 Dolby Virtual Speakers advanced settings in Dolby Master Studio........... 25
Figure 2.5-7 Dolby Headphone in Dolby Master Studio ................................................. 26
Figure 2.5-8 Dolby Headphones advanced settings in Dolby Master Studio................. 27
Figure 2.5-9 Dolby Pro Logic IIx in Dolby Master Studio................................................ 28
Figure 2.5-10 Dolby Pro Logic IIxs advanced settings in Dolby Master Studio ............. 30
Figure 2.5-11 Dolby Digital Live in Dolby Master Studio................................................. 31Figure 2.6-1 Default Format............................................................................................32
Figure 4.1-1 Default Device Indication............................................................................ 35
Figure 4.1-2 Highlighted J acks Indicate The Device Is P lugged.................................... 35
Figure 4.3-1 Warning Message When Changing Speaker Mode or Device Default Format
Under Music Mode................................................................................................. 37
Figure 4.4-1 Systems With HDMI Tab ............................................................................ 38
Figure 4.4-2 Systems W/O HDMI tab, But A Digital Output............................................ 39
Figure 4.6-1 Show Disconnected Devices...................................................................... 41
Figure 4.6-2 Stereo Mix................................................................................................... 41
Figure 4.7-1 5.1 Speaker Placement In CE Environments............................................. 43
Figure 4.7-2 5.1 Speaker Placement In PC Environments............................................. 43
Figure 4.7-3 7.1 Speaker Setup......................................................................................44
Figure 4.8-1 Set Default Device......................................................................................45
Figure 4.9-1 Configure Rear Three J acks As Multiple Channel ..................................... 47
Realtek HD Audio Manager3
7/28/2019 realtek Manual
4/47
Getting Started
Getting Started
After Vista OS is initiated and Realtek HD Audio Driver is correctly installed, the Realtek HD
Audio Manager icon will appear at the notification area (lower right of the screen). You may
double click the icon and the GUI will pop up accordingly.
Double click to enable
Realtek HD Audio Manager
Copy Rights of Realtek Semiconductor 2008
7/28/2019 realtek Manual
5/47
0. Introduction
Introduction
As Vista OS brought users a newer interface, Realteks new Vista GUI provides users a more
convenient access for audio appreciation. This page will show you a quick glance with brief
note of major features and applications comprised by a sense of area allocation of the GUI.
I. Jack and Device: This area depicts all render and capture devices currently
connected w/ your PC; the check sign (in orange) indicates the devices as default
input/output setting. Additionally, more applications would be found at the option of
Device Advanced Settings.
II. Appl ication Enhancement : The array of options will provide you a complete
guidance of anticipated sound effect for both output and input device.
III. Information: Showing hardware, software information, and language setting.
II
I
I
III
Realtek HD Audio Manager5
7/28/2019 realtek Manual
6/47
1. J ack and Device
1. Jack and Device
All audio functions start with a correct device connection and Realtek HD Audio Manager
facilitates users with a series of friendly interface to ensure the device is connected. You may
figure out more tips with a demonstrated example below:
Example: How to Successfully Connect a Microphone
Step I: When you plug into the microphone at the pink jack of front panel, a dialogue window
will pop up asking you which device is current connected. As you know, each jack corresponds
to its default setting, and the pink jack represents Mic In.
Realtek HD Audio Manager6
7/28/2019 realtek Manual
7/47
1. J ack and Device
Step II: When you confirm its OK, a new device will be included in the Device area (upper of
the screen), which you could compare the previous figure and the one below.
Step III: Once the process is completed, you may click the pink jack of the front panel, the
Microphone page will pop up afterwards. Showing the connectivity is successfully
implemented.
Realtek HD Audio Manager7
7/28/2019 realtek Manual
8/47
1. J ack and Device
Jack and Device
1.1. Advanced Setting
Connector Setting
When you click the icon, namely, the yellow flag on the upper right of the screen, it will pop up
a dialogue window asking users their preference when system detects a device is plugged in.
Set Default Device
When more than 2 playback device plugged in, e.g. Digital output and Speaker, users need to
choose one and set it as default device. Same situation applies to the recording device.
Regarding how to set default device, please refer to P45 What Is Default Device.
Figure 1.1-1 Set Default Device
Realtek HD Audio Manager8
7/28/2019 realtek Manual
9/47
1. J ack and Device
Device Advanced Settings
The advanced setting provides the mechanism to deal with 2 independent audio streams.
Assuming that 2 devices already plugged in, say, a set of stereo speakers and headphone,
and you are about to use the speaker for a movie while using the headphone for the latest hit.
Select Make front and rear output devices playback 2 different audio streams after you click
the device advanced settings with a pop up window.Choose speaker and set it as default device.
Initiate any application program, e.g. media player, to playback the content.
Figure 1.1-2 Device Advanced Settings
Realtek HD Audio Manager9
7/28/2019 realtek Manual
10/47
1. J ack and Device
Choose the headphone and set it as default device, it will appear as HD Audio 2nd output.
After that, initiate an application program and playback the content.
Realtek HD Audio Manager10
7/28/2019 realtek Manual
11/47
2. Application Enhancement
2. Application Enhancement
2.1. Speaker Configuration
Realtek Audio facilitates users to best enjoy the listening appreciation with your available
equipments. We provide speaker settings spanning from 7.1channel, 5.1channel,
Quadraphonic (4 channel), stereo (2 channel). The following are two common scenarios.
Example I : 7.1ch. Speaker Set for Home Theater
Figure 2.1-1 7.1 Speaker Setup
Assuming you are building your home theater system with 7.1ch speaker set. Once you have
bought the speaker set with Realtek audio codec inside, you may follow the procedures to
correctly enable the speaker configuration.
Step I: Plug in the device in any available jack. Preferably at the default setting; e.g. the
default setting of the front speaker is the green jack of the rear panel.
Step II: A Dialogue Window of The current connected device will pop up for your selection.
You may click OK once you confirm it is an appropriate setting.
Step III: A useful check out icon (with circle above) is designed to help you hear and verify
Realtek HD Audio Manager11
7/28/2019 realtek Manual
12/47
2. Application Enhancement
the sound exactly from the designated speakers.
Additional Appl ications
Speaker Fill
Definition: Speaker Fill creates a virtual environment for playback of stereo audio sources
on surround speaker systems
Example: When you playback a MP3, and you will hear sound appear from every
speaker of a 7.1ch set once you enable the speaker fill
Swap center/subwoofer speakers
Definition: It is an option to make low frequency sound playback from subwoofer. Users
do not need to check this item if low frequency sound is from subwoofer already.
Bass Management
Definition: Bass Management enhances or redirects frequencies below crossover point
to reduce loss or distortion of bass signals. It will facilitate users to obtain the best bass
enjoyment.
Full Range Speaker
Definition: This is a reminder for users to confirm the speaker system is full or small
range, for small range speakers cant output full frequency audio streams.
Optional Speakers
Definition: The default setting is to assume users equip with subwoofer with their 7.1ch
speaker set, thats why you could see with a check sign. However, if users dont have
subwoofer, we need to blank the option and suggested to enable bass management to
make sure low frequency audio streams will be playback.
Realtek HD Audio Manager12
7/28/2019 realtek Manual
13/47
2. Application Enhancement
Example II: Stereo Speaker Set
Figure 2.1-2 Stereo Speaker Setup
Assuming that a set of front speakers with your Desktop at the study room is what you have.
You may follow the procedure to correctly enable the speaker configuration.
Step I: Plug in the device in any available jack. Preferably at the default setting; e.g. the
default setting of the front speaker is the green jack of the rear panel.
Step II: A Dialogue Window of The current connected device will pop up for your selection.
You may click OK once you confirm it is an appropriate setting.
Step III: A useful check out icon (highlight in yellow) is allocated at the bottom of the screen.
When you click it, you should be able to hear the sound exactly from the speakers.
Additional Appl ication
Headphone Virtualization Definition: Headphone Virtualization uses advanced processing to create the illusion of a
home theater while using stereo headphone.
Example: When you use a normal headphone to listen MP3, this option will provide a
surround quality music.
Virtual Surround
Definition: Virtual Surround encodes surround audio for transfer as stereo output to
receivers with a Matrix decoder.
Example: It will be beneficial for users to enjoy a surround sound with only stereo
speakers
Realtek HD Audio Manager13
7/28/2019 realtek Manual
14/47
2. Application Enhancement
2. Application Enhancement
2.2. Sound Effects
Once you click the Sound Effect tab, 3 clusters: Environment, Equalizer and Karaoke
are available for selection.
Figure 2.2-1 Sound Effects
Environment1. Realtek Audio provides total 23 different kinds of sound effects.
2. Five popular settings: Stone Room, Bathroom, Sewer pipe, Arena and Auditorium
for quick enjoyment.
3. This function is popular with gaming aimed to enhance the sound effect for more livingly.
Equalizer
1. Equalizer frees users from the default settings of the playback contents.
Realtek HD Audio Manager14
7/28/2019 realtek Manual
15/47
2. Application Enhancement
2. Realtek Audio provides you optimized settings with four frequently utilized buttons: Pop
Live Club & Rock for quick enjoyment.
3. This function is mostly utilized when you playback music and try to create some changes
on your own.
Karaoke
Figure 2.2-2 karaoke mode
1. Karaoke mode brings Karaoke fun back home.
2. Realtek Audio could assist you to eliminate the vocal of the song and adjust the key to
accommodate your range of voice.
3. Advanced settings:
Vocal Cancellation: When you click the mouth part of the model singer at the GUI,
the vocal of the song would be eliminated, while the background music is still in place.
You can be that singer!
Key Adjustment: By pulling + and to find out suitable key fitting your range of
voice.
Realtek HD Audio Manager15
7/28/2019 realtek Manual
16/47
2. Application Enhancement
2. Application Enhancement
2.3. Microphone Effects
With the growing demand of recording quality when using VoIP, Realtek is providing you a
complete set of functions to best benefit users communication experience.
Figure 2.3-1 Microphone Effects
How to start?
Once you plug into the microphone and set it as default device, it will appear a check on the
device area in the upper of the screen. Single click the microphone icon and the microphone
effect page will pop up.
Volume Control
Realtek HD Audio Manager16
7/28/2019 realtek Manual
17/47
2. Application Enhancement
A. Recording Volume
You are freely to move the bar up and down for suitable volume. It ranges from 0 to 100, while
bigger numbers indicates larger boost.B. Playback Volume
When you enable this function where the default setting is mute; you are able to hear your
sound from the speaker while its recorded through microphone. Most commonly seen when
you are singing Karaoke.
Noise Suppression(NS)
Realtek HD Audio Manager17
7/28/2019 realtek Manual
18/47
2. Application Enhancement
1. Uncomfortable with the background noise when you are SKYPE out? e.g. the unwanted
sound generated from the fan inside PC.
2. When you enable noise suppression, the static and fixed frequency will be suppressed
and the microphone quality will be upgraded.
Acoust ic Echo Cancel lat ion(AEC)
1. It prevents playback sound from being recorded by microphone together with your sound.
2. When VOIP with your friends, his/her voice will come from speakers (playback). However,
their voice might also be recorded into your microphone then return to your friend through
Internet. In that case, your friend will hear his/her own voice again.
3. With AEC enabled, your friend can enjoy the benefit with eliminated feedback echo.
Realtek HD Audio Manager18
7/28/2019 realtek Manual
19/47
2. Application Enhancement
2.Application Enhancement
2.4. Room Correction
Your speaker placement cannot be optimal because of room space limitation? Room
Correction is designed to solve this issue in a software way. You can adjust volume of every
single speaker as well as adjust distance to reach better speaker balance.
Figure 2.4-1 Room Correction
Volume
1. Each speaker volume could be adjusted individually to accommodate room placement and
audio source.
2. Realtek Audio provides volume range from -10 dB to 10 dB.
Distance
1. The sound-field could be adjusted individually by altering the distance between each
speaker and yourself.
2. The adjustment range varies from 0.5 M to 10 M (0Ft to30 Ft.).
Realtek HD Audio Manager19
7/28/2019 realtek Manual
20/47
2. Application Enhancement
2.Application Enhancement
2.5. DOLBY
DOLBY HOME THEATER & DOLBY MASTER STUDIO1mean to bring you a new class of
entertainment experience, by using home PCs.
DOLBY HOME THEATER contains 4 elements
1. DOLBY HEADPHONE
2. DOLBY VIRTUAL SPEAKER
3. DOLBY PRO LOGIC II
4. DOLBY DIGITAL LIVE
DOLBY MASTER STUDIO contains 4 elements
1. DOLBY HEADPHONE
2. DOLBY VIRTUAL SPEAKER
3. DOLBY PRO LOGIC IIx
4. DOLBY DIGITAL LIVE
DOLBY HOME THEATER
DOLBY VIRTUAL SPEAKER
This delivers a realistic 5-channel surround sound experience from just two speakers.
With following conditions, when DOLBY HOME THEATER is being enabled, it is DOLBY
VIRTUAL SPEAKER that is presented to users.
1. There is no headphone plugged in the system
2. Speaker configuration is at stereo mode
Note: To truly deliver 5.channel surround sound, please make sure the audio source that you
are about to play is recorded in 5 / 5.1 format.
Figure 2.5-1 Dolby Virtual Speaker in Dolby Home Theater
1Check on your system guide to learn which Dolby logo program your system complies
with
Realtek HD Audio Manager20
7/28/2019 realtek Manual
21/47
2. Application Enhancement
DOLBY HEADPHONE
DOLBY HEADPHONE delivers realistic 5 channel listening experience over any pair of
headphones
With following conditions, when DOLBY HOME THEATER is being enabled, it is DOLBY
HEADPHONE that is presented to users.
1. A headphone is plugged in the system
2. Speaker configuration is at stereo mode
Note: To truly deliver 5-channel surround sound, please make sure the audio source that you
are about to play is recorded in 5 / 5.1 format.
Figure 2.5-2 Dolby Headphone in Dolby Home Theater
Realtek HD Audio Manager21
7/28/2019 realtek Manual
22/47
2. Application Enhancement
DOLBY PRO LOGIC II
DOLBY PRO LOGIC II transforms stereo programs into a natural, realistic, and spacious 5 &
7.1 channel listening experience.
With following conditions, when DOLBY HOME THEATER is being enabled, it is DOLBY PRO
LOGIC II that is presented to users.
1. A headphone is NOT plugged in the system
2. Speaker configuration is at multi-channel (4/5.1/7.1) mode
Figure 2.5-3 Dolby Pro Logic II in Dolby Home Theater
Realtek HD Audio Manager22
7/28/2019 realtek Manual
23/47
2. Application Enhancement
DOLBY DIGITAL LIVE
DOLBY DIGITAL LIVE makes a seamless connection between your PCs and Home Theater
devices. DOLBY DIGITAL LIVE helps transform PCs audio data into Dolby Digital format and
moreover output it to the port S/PDIF out. This makes it possible to output your home PC data
to your Home Theater devices via S/PDIF
Upon the tab device format under the Digital Output, to enable Dolby Digital Live, please
single click the button Dolby Digital Live or drag the drop-down menu and choose the format
Dolby Digital Live (5.1 Surround)
Figure 2.5-4 Dolby Digital Live in Dolby Home Theater
Realtek HD Audio Manager23
7/28/2019 realtek Manual
24/47
2. Application Enhancement
DOLBY MASTER STUDIO
DOLBY VIRTUAL SPEAKER
This delivers a realistic 5-channel surround sound experience from just two speakers.
With following conditions, when DOLBY MASTER STUDIO is being enabled, it is DOLBY
VIRTUAL SPEAKER that is presented to users.
1. There is no headphone plugged in the system
2. Speaker configuration is at stereo mode
Note: To truly deliver 5.channel surround sound, please make sure the audio source
that you are about to play is recorded in 5 / 5.1 format.
Figure 2.5-5 Dolby Virtual Speaker in Dolby Master Studio
Realtek HD Audio Manager24
7/28/2019 realtek Manual
25/47
2. Application Enhancement
DOLBY VIRTUAL SPEAKER offers two virtualization modes that differ in surround effect and
apparent speaker localization. Each mode may be used with any type of program content.
Reference mode:This creates convincingly realistic five-speaker surround sound from two
speakers, with the apparent width of the surround across the front image defined by the
distance between two speakers.
Wide mode:This provides a wider, more spacious front image when the two speakers are
close together, with the same convincingly realistic five-speaker surround sound as the
reference mode.
Figure 2.5-6 Dolby Virtual Speakers advanced settings in Dolby Master Studio
Realtek HD Audio Manager25
7/28/2019 realtek Manual
26/47
2. Application Enhancement
DOLBY HEADPHONE
DOLBY HEADPHONE delivers realistic 5 channel listening experience over any pair of
headphones
With following conditions, when DOLBY MASTER SUTDIO is being enabled, it is DOLBY
HEADPHONE that is presented to users.
1. A headphone is plugged in the system
2. Speaker configuration is at stereo mode
Note: To truly deliver 5-channel surround sound, please make sure the audio source
that you are about to play is recorded in 5 / 5.1 format.
Figure 2.5-7 Dolby Headphone in Dolby Master Studio
Realtek HD Audio Manager26
7/28/2019 realtek Manual
27/47
2. Application Enhancement
DOLBY HEADPHONE
Studio: Small, acoustically damped room
Cinema: Slightly wetter or more reverberant room than Studio
Hall: Larger room than Studio; more distant and diffuse effect
Figure 2.5-8 Dolby Headphones advanced settings in Dolby Master Studio
Realtek HD Audio Manager27
7/28/2019 realtek Manual
28/47
2. Application Enhancement
DOLBY PRO LOGIC IIx
DOLBY PRO LOGIC IIx transforms stereo programs into a natural, realistic, and spacious 5 &
7.1 channel listening experience.
With following conditions, when Dolby Master Studio is being enabled, it is DOLBY PRO
LOGIC IIx that is presented to users.
1. A headphone is NOT plugged in the system
2. Speaker configuration is at multi-channel (4/5.1/7.1) mode
Figure 2.5-9 Dolby Pro Logic IIx in Dolby Master Studio
Realtek HD Audio Manager28
7/28/2019 realtek Manual
29/47
2. Application Enhancement
Movie mode
The movie mode is for use with stereo television shows and all programs encoded in Dolby
Surround. The result is enhanced soundfield directionality that approaches the quality of
discrete 5.1-channel sound
Music mode
The music mode is for use with any stereo music recordings, and provides a wide and deep
sound space. The Music mode includes controls that allow the sound to be tailored to
individual listening tastes.
Panorama control
This extends the front stereo image to include the surround speakers for an exciting
wraparound effect with side-wall imaging. It is particularly effective for recordings which
have left- or right- channel elements in the mix, as these are detected and accentuated
by the Panorama process.
Dimension control
This allows the user to gradually adjust the soundfield either towards the front or the rear.
This can be useful to help achieve the desired balance from all the speakers with certain
recordings that may contain either too much or too little special effect. Step 0 is the
recommended setting, which has no effect on the sound. Step 1, 2 and 3 gradually move
Realtek HD Audio Manager29
7/28/2019 realtek Manual
30/47
2. Application Enhancement
sound forward, and steps 1, 2, and 3 move the sound toward the surround.
Center Width control
This allows center-channel sound to be positioned between center speaker and left/right
speakers over a range of eight steps. Step 3 uses a combination of all three front
speakers to give the best vocal imaging and most seamless soundstage presentation,
and is recommended for most recordings. Step 0 places all center sound in the center
speaker. Step 7 places all center sound equally in the left/right speakers, just as in
conventional stereo.
All three of the above controls may be used alone or in any combination. It is recommended
that you try them on a few programs. After try, it is easier to find the settings that are
preferable.
Figure 2.5-10 Dolby Pro Logic IIxs advanced settings in Dolby Master Studio
DOLBY DIGITAL LIVE
DOLBY DIGITAL LIVE makes a seamless connection between your PCs and Home Theater
devices. DOLBY DIGITAL LIVE helps transform PCs audio data into Dolby Digital format and
moreover output it to the port S/PDIF out. This makes it possible to output your home PC data
to your Home Theater devices via S/PDIF
Realtek HD Audio Manager30
7/28/2019 realtek Manual
31/47
2. Application Enhancement
Upon the tab device format under the Digital Output, to enable Dolby Digital Live, please
single click the button Dolby Digital Live or drag the drop-down menu and choose the format
Dolby Digital Live (5.1 Surround)
Figure 2.5-11 Dolby Digital Live in Dolby Master Studio
Realtek HD Audio Manager31
7/28/2019 realtek Manual
32/47
2. Application Enhancement
2.Application Enhancement
2.6. Default Format
Default Format provides an advanced application settings which most benefit users with the
adequate and comfortable listening enjoyment.
Figure 2.6-1 Default Format
Restore Default
Here are some commonly seen users scenarios for this application.
1. CD Format: When you are loading CD for playback/recording, single click CD Format, it
will switch the setting to 24Bits, 44100Hz. It will facilitate users with the best quality if you
are using CD on the device.
2. DVD format: When you are loading DVD for playback/recording, single click DVD format,
it will switch the setting to 24Bits, 48000Hz. It will facilitate users with the best quality if
you are using DVD on the device.
3. The different Bits and Sampling Rate combinations are also available for users options.
Realtek HD Audio Manager32
7/28/2019 realtek Manual
33/47
2. Application Enhancement
S/PDIF-In to S/PDIF-Out pass through:
The data from S/PDIF-In can be real-time played from S/PDIF-Out.
Realtek HD Audio Manager33
7/28/2019 realtek Manual
34/47
3. Information
3. Information
Hardware / Software information
of your audio system
Display icon in notification area
Language setting
Autoindicates the language setting
is the same as your OS language
Realtek HD Audio Manager34
7/28/2019 realtek Manual
35/47
4. FAQ
4. FAQ
4.1. No Sound Output1. Check default device
Upon each speaker device, the v indicates the device is the default playback device. For
instance, Figure 4.1-1 indicates it is Speaker/Microphone the default playback/recording
device. In this case, the sound output should go from analog out. If you connect the system to
an AV receiver via S/PDIF; to get sound output, please make sure the default device is
changed to Digital Output. For how to set the default device, please refer to P45 What Is
Default Device
Figure 4.1-1 Default Device Indication
2. Check i f the speaker is well connected
In the case that speaker is well connected, you should be able to find the correspondent jack is
highlighted upon Realtek GUI.
Figure 4.1-2 Highlighted J acks Indicate The Device Is P lugged
Realtek HD Audio Manager35
7/28/2019 realtek Manual
36/47
4. FAQ
Realtek HD Audio Manager36
7/28/2019 realtek Manual
37/47
4. FAQ
4.2. No Sound When Resuming From S3/S4
When the system goes into hibernation/sleep, certain playback applications, such as Windows
Media Player, PowerDVD or WinDVD would stop playback. To resume the sound, please click
Play button.
Please note, the sound will re-start from the very beginning point, not where you stopped last
time.
4.3. Sound Output Suddenly Stops
Two event may cause sound output suddenly stops
Changing speaker mode (for how to change speaker mode, please refer to section 2.1
Speaker Configuration)
Changing default format (for how to change default format, please refer to section 2.6
Default Format)
Music Mode
When listening to music, if users change speaker mode or device default format in the middle
of playback, users would experience the music suddenly stops and be popped a dialogue as
Figure 4.3-1. To resume the music, please turn off the playback application, then turn it on
again.Figure 4.3-1 Warning Message When Changing Speaker Mode or Device Default Format Under Music Mode
DVD Mode
When watching DVD, if users change speaker mode or device default format in the middle of
playback, playback applications would stop audio output temporarily (however video playback
is still rolling). After several seconds, once after playback applications successfully re-create
the audio device, the audio would be resumed and match with video.
Realtek HD Audio Manager37
7/28/2019 realtek Manual
38/47
4. FAQ
4.4. HDMI
You may find your systems as below.
1. With HDMI tab
Set HDMI as the default device
Connect a system with a HDMI display via HDMI connector
The sound will be out from HDMI display
In the case no sound output when watching DVD, please check if your HDMI display is
capable of decoding AC3. If not, you could have sound output from following three ways.
1. Select PCM stream from the settings of software DVD decoder, i.e. WMP, WinDVD or
PowerDVD.
2. To enjoy AC3 stream, you could have sound outputted from S/PDIF-out; while video is
still through HDMI.
3. Connect the system to a HDMI AC3 decoder
Figure 4.4-1 Systems With HDMI Tab
2. Without HDMI tab, but a Digital Out
Set Digital Output as the default device
Realtek HD Audio Manager38
7/28/2019 realtek Manual
39/47
4. FAQ
Connect a system with a HDMI display via HDMI connector
The sound will be out from HDMI display
In the case no sound output when watching DVD, please check if your HDMI display is
capable of decoding AC3. If not, you could have sound output from following two ways.
1. Select PCM stream from the settings of software DVD decoder, i.e. WMP, WinDVD or
PowerDVD.
2. To enjoy AC3 stream, you could have sound outputted from S/PDIF-out; while video is
still through HDMI.
3. Connect the system to a HDMI AC3 decoder
Figure 4.4-2 Systems W/O HDMI tab, But A Digital Output
Realtek HD Audio Manager39
7/28/2019 realtek Manual
40/47
4. FAQ
4.5. How to Perform Multistreaming
Multistreaming Playback
1. Select Make front and rear output devices playback 2 different audio streams after you
click the Device Advanced Settings with a pop up window.
2. Click OK to confirm the setting.
3. Choose speaker and set it as default device.
4. Initiate any application program, e.g. SW DVD player, to playback DVD content.
5. Choose the headphone and set it as default device, it will appear as HD Audio 2nd
output.
After that, initiate an application program, e.g Media Player, and playback MP3 content.
Realtek HD Audio Manager40
7/28/2019 realtek Manual
41/47
4. FAQ
4.6. How to Use Stereo Mix Recording
1. Right click upon Vista Sound GUI to initiate a pop dialogue (as Figure 4.6-1)
2. Make Show Disconnected Devices checked
Figure 4.6-1 Show Disconnected Devices
3. Upon Recording tab, a new device named Stereo Mix appears, as Figure 4.6-2
Figure 4.6-2 Stereo Mix
Realtek HD Audio Manager41
7/28/2019 realtek Manual
42/47
4. FAQ
4. Initiate a playback application, e.g. Windows Media Player, and playback the audio steam
to speaker or headphone.5. Select Stereo Mix and set it as the default recording device
6. Initiate a recording application, e.g. Sound Recorder, to record the playback stream.
Realtek HD Audio Manager42
7/28/2019 realtek Manual
43/47
4. FAQ
4.7. Set Up Home Theater Environments
1. 5.1 Speaker placement
Consumer Electronics Setup
Front Left / Right
Center / Subwoofer (LFE)
Surround Left / Right
As Figure 4.7-1 indicates
Figure 4.7-1 5.1 Speaker Placement In CE Environments
PC Speaker Setup
Front Left / Right
Center / Subwoofer (LFE)
Rear Left / Right
Figure 4.7-2 5.1 Speaker Placement In PC Environments
Comparison between CE & PC 5.1
CE PC
CH 1/2 Front L/R Front L/R
CH 3/4 Cen/LFE Cen/LFE
CH 5/6 Surround L/R Rear L/R
Realtek HD Audio Manager43
7/28/2019 realtek Manual
44/47
4. FAQ
2. 7.1 Speaker placement
Consumer Electronics Setup
Front Left / Right
Center / Subwoofer (LFE)
Surround Left / Right
Surround Back Left / Right
PC Speaker Setup
Front Left / Right
Center / Subwoofer (LFE)
Rear Left / Right
Side Left / Right
Figure 4.7-3 7.1 Speaker Setup
CE PC
CH 1/2 Front L/R Front L/R
CH 3/4 Cen/LFE Cen/LFE
CH 5/6 Surround L/R Rear L/R
CH '7/8
Surround Back
L/R Side L/R
Realtek HD Audio Manager44
7/28/2019 realtek Manual
45/47
4. FAQ
4.8. What Is Default Device
To set default device is to determine from where sound should be outputted /inputted.
Two ways to set default device
I. Mouse over to device tab area (as Figure 4.8-1, part I), right click the mouse to
set the device to be the default device
II. Single click the button Set Default Device
Once the device has been set as the default device, you should be able to find a tick sign upon
the device tab.
Figure 4.8-1 Set Default Device
I.
II.
Realtek HD Audio Manager45
7/28/2019 realtek Manual
46/47
4. FAQ
4.9. Configure Rear Three Jacks As Multiple Channel
Your system has three jacks, i.e. blue, green and pink jacks, on the rear panel. These three
jacks each serve as Line In, Front Speaker and Microphone by default. With the help of
Retasking2, these three jacks can be free from its default function. Instead, you could
configure rear three jacks as below combinations.
Jack 2 channel 4 channel 6 channel
Rear Blue Line In Surround Speaker Surround Speaker
Rear Green Front Speaker Front Speaker Front Speaker
Rear Pink Microphone Microphone Center/Subwoofer
Taking 5.1 channel as an example.
Step I: Open the drop down menu and choose 5.1 Speaker
Step II: Plug in 5.1 channel speaker in rear three jacks based on the above table.
Step III: A useful check out icon (with circle above) is designed to help you hear and verify
the sound exactly from the designated speakers.
You could hear 5.1 channel sound from your 5.1 speakers.
To go back to 2 channel mode, choose 2ch from the drop down menu.
2Not every system supports retasking feature. If you can not find 4/5.1 channel options from the drop
down menu, it indicates your system does not support retasking.
Realtek HD Audio Manager46
7/28/2019 realtek Manual
47/47
4. FAQ
Figure 4.9-1 Configure Rear Three J acks As Multiple Channel