REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD ...

Laboratory Name : REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD, BENGALURU, KARNATAKA,INDIA

Accreditation Standard ISO/IEC 17025:2005Certificate Number TC-8039 Page No 1 of 33Validity 19/10/2018 to 18/10/2020 Last Amended on 13/04/2020

This is annexure to 'Certificate of Accreditation' and does not require any signature.

S.No Discipline / Group Materials or Products testedComponent, parameter or

characteristic tested / SpecificTest Performed / Tests or type of

tests performed

Test Method Specification against which tests areperformed and / or the techniques / equipment used

Permanent Facility

1 ELECTRONICS- AUDIOEQUIPMENT

Audio, Video and Similarelectronic apparatus

Antenna coaxial sockets- Endurance test

IEC 60065: 2014 IS 616:2017 (Clause12.5)


Audio, Video and Similarelectronic apparatus Bump Test IEC 60065: 2014 IS 616:2017 (Clause

12.1.2)



Constructionalrequirements with regardto the protection againstelectric shock - ForceTest

IEC 60065: 2014 IS 616:2017 (Clause8.12, 8.13)



Electrical shock hazardunder normal operatingcondition – Resistance toexternal forces

IEC 60065: 2014 IS 616:2017 (Clause9.1.7)



Electrical Shock hazardunder normal operatingconditions -Determination ofaccessible parts

IEC 60065: 2014 IS 616:2017 (Clause9.1.1.3)


Audio, Video and Similarelectronic apparatus Fault Conditions IEC 60065: 2014 IS 616:2017 (Clause

4.3)



Terminals for externalflexible cords and forpermanent connection tothe mains supply

IEC 60065: 2014 IS 616:2017 (Clause15.3.5, 15.3.6,15.3.7)



Wall or ceiling mountedequipment

IEC 60065: 2014 IS 616:2017 (Clause19.7)

9 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment Clause No: 10.2 - Surge

test IEC 60065

10 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment Clause No: 10.2 - Surge

Test IS 616

11 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment Clause No: 12.7.3.6 -

Crush Test IS 616

12 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment Clause No: 8.21 -

Mandrel Test IEC 60065






tests performed


13 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment Clause No:12.7.3.6 -

Crush Test IEC 60065

14 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment

Clause No:15.4 - Devicesforming a part of mainsplug

IEC 60065

15 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment

Clause No:15.4 - Devicesforming a part of mainsplug

IS 616

16 ELECTRONICS- AUDIOEQUIPMENT Audio Equipment Clause No:8.21 - Mandrel

Test IS 616



Antenna Coaxial socket –Impact test

IEC 60065: 2014 IS 616:2017 (Clause12.5)



Antenna Coaxial socket –Torque test

IEC 60065: 2014 IS 616:2017 (Clause12.5)


Audio, Video and Similarelectronic apparatus Clearances IEC 60065: 2014 IS 616:2017

(Clause13.1, 13.2)



Clearances and creepageDistances -Determination of workingvoltages

IEC 60065: 2014 IS 616:2017(Clause13.1, 13.2)



Constructionalrequirements with regardto the protection againstelectric shock

IEC 60065: 2014 IS 616:2017 (Clause8.1,8.7,8.15, 8.16, 8.18,8.19,8.20)



Constructionalrequirements with regardto the protection againstelectric shock - Test oninsulating material

IEC 60065: 2014 IS 616:2017 (Clause8.3)


Audio, Video and Similarelectronic apparatus Creepage Distances IEC 60065: 2014 IS 616:2017

(Clause13.4)


Audio, Video and Similarelectronic apparatus Drop Test IEC 60065: 2014 IS 616:2017 (Clause

12.1.5, 12.7.3.4)



Electrical connectionsand mechanical fixings

IEC 60065: 2014 IS 616:2017 (Clause17)






tests performed




Electrical shock hazardunder normal operatingcondition – Openings ofthe enclosure

IEC 60065: 2014 IS 616:2017 (Clause9.1.3)



Electrical shock hazardunder normal operatingcondition – Pre-setconditions

IEC 60065: 2014 IS 616:2017 (Clause9.1.4)



Electrical shock hazardunder normal operatingcondition – Terminals

IEC 60065: 2014 IS 616:2017 (Clause9.1.4)



Electrical shock hazardunder normal operatingcondition – Withdrawal ofMAINS plug

IEC 60065: 2014 IS 616:2017 (Clause9.1.6)



Electrical Shock hazardunder normal operatingconditions -Determination ofhazardous live parts

IEC 60065: 2014 IS 616:2017 (Clause9.1.1.1, 9.1.1.2, 9.1.2, 9.2)


Audio, Video and Similarelectronic apparatus External flexible cords IEC 60065: 2014 IS 616:2017 (Clause

16.2)


Audio, Video and Similarelectronic apparatus External flexible cords IEC 60065: 2014 IS 616:2017 (Clause

16.4)



Fault Condition - ElectricShock Hazard

IEC 60065: 2014 IS 616:2017 (Clause11.1)



Heating under normaloperating conditions IEC 60065: 2014 IS 616:2017 (Clause 7)


Audio, Video and Similarelectronic apparatus Humidity Treatment IEC 60065: 2014 IS 616:2017 (Clause

10.3)


Audio, Video and Similarelectronic apparatus Impact Test IEC 60065: 2014 IS 616:2017 (Clause

12.1.4, 12.7.3.5)



Insulation resistance andDielectric strength test

IEC 60065: 2014 IS 616:2017 (Clause10.4)



Marking and Instructions- General requirements

IEC 60065: 2014 IS 616:2017 (Clause5.1)






tests performed




Marking and Instructions- Identification andsupply ratings

IEC 60065: 2014 IS 616:2017 (Clause5.2 (g) & (h))



Measurement ofTransient Voltages

IEC 60065: 2014 IS 616:2017(Clause13.3.4)



Provision for protectiveearthing

IEC 60065: 2014 IS 616:2017 (Clause15.2)


Audio, Video and Similarelectronic apparatus Push pull tests

IEC 60065: 2014 IS 616:2017 (Clause12.2, 12.4, 12.6.2,15.3.2, 17.9, 19.3,19.7)



Stability and Mechanicalhazards - Test at 100 tohorizontal

IEC 60065: 2014 IS 616:2017 (Clause19.1,19.2)



Stability and Mechanicalhazards - Vertical Forcetest & Horizontal test

IEC 60065: 2014 IS 616:2017 (Clause19.3, 19.4)


Audio, Video and Similarelectronic apparatus Stress Relief Test IEC 60065: 2014 IS 616:2017 (Clause

12.1.6, 12.7.3.2)



Telescoping or rodantennas

IEC 60065: 2014 IS 616:2017 (Clause12.6.1, 12.6.2)


Audio, Video and similarelectronics apparatus Fault condition- Heating IEC 60065: 2015, IS 616: 2017 (Clause

7)


Audio, Video and Similarelectronics apparatus

Heating under normaloperating conditions IEC 60065: 2014, IS 616:2017 (Clause 7)

49ELECTRONICS-ENVIRONMENTAL TESTFACILITY

Electrical, Electronicsand Electro-mechanicalSub - Assemblies

Ingress Protection, 1stcharacteristic numeralIP1X

IEC 60529, IEC 60950- 22: 2013




IEC 60529, IEC 60950- 22: 2013




IEC 60529, IEC 60950- 22: 2013




IEC 60529, IEC 60950- 22: 2013






tests performed





IEC 60529, IEC 60950- 22: 2013, QM333, JSS 55555




IEC 60529, IEC 60950- 22: 2013, QM333, JSS 55555



Ingress Protection, 2ndcharacteristic numeralIPX1

IEC 60529, IEC 60950- 22: 2013




IEC 60529, IEC 60950- 22: 2013




IEC 60529, IEC 60950- 22: 2013




IEC 60529, IEC 60950- 22: 2013




IEC 60529, IEC 60950- 22: 2013




IEC 60529, IEC 60950- 22: 2013




IEC 60529, IEC 60950- 22: 2013



Damp heat cyclicIEC 60068-2-30:2001, IS 9000 (Part5/Sec 1&2) - 1981 (RA2016), QM 333Issue-2:2010 Test No.: 3 JSS55555:2000 Revision 2 Test 27



Damp Heat steady stateIEC 60068-2-78:2001 IS 9000 (Part4):2008 (RA2018), QM 333 Issue-2:2010Test No.:5 JSS 55555:2000 Revision 2Test 10






tests performed



Electronic & Electricalequipments, Sub-assemblies

Change of temperature

IEC 60068-2-14:2009 CL.4,5,6,7,8 IS9000 (Part 14/Sec 1 to 3):1988(RA2018), QM 333 Issue-2:2010 TestNo.4, JSS 55555:2000 Revision 2 Test22: 2016



Cold (Low Temperature)IEC 60068-2-1:2007, IS 9000 (Part 2/Sec1 to 4):1977 (RA2016), QM 333Issue-2:2010 Test No.:1, JSS55555:2000 Revision 2 Test 20



Dry Heat (HighTemperature)

IEC 60068-2-2:2007, IS 9000 (Part 3/Sec1 to 5):1977 (RA2016) QM 333Issue-2:2010 Test No.:2, JSS55555:2000 Revision 2 Test 17

67 ELECTRONICS- ITEQUIPMENT

Information Technologyequipments Electric strength

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Clause 5.2,2.1.1.6,2.3.2,2.3.4, 2.10.5,3.1.4,6.1.2,6.2.2.2


Information Technologyequipments Impact Test

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.4.2.5/


Information Technologyequipments

Inspection of AdjustableControls




Touch current andprotective conductorcurrent

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clause 5.1/


Information Technologyequipment

Limited current circuitsmeasurement test

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.2.4/






tests performed



Information Technologyequipment

Test for operatingvoltages generatedexternally




Abnormal operating andfault conditions





IS 13252 Part 1: 2010 A 1: 2013 + A 2:2015/ UL 60950-1:2017/ CSA C22.c No.60950-1-07/ IEC 60950-1:2005 &A1:2009 + A2:2013/ Cl. No. 5.3/:


Information Technologyequipments Access to ELV wiring

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.2.1.1.3/..



Access to energizedparts

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clause 2.1.1.1,2.8.2, 2.8.3, 4.2/



b. Transients fromTelecommunicationnetwork

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Cl.no.2.10.3.9/


Information Technologyequipments Clearances




Creepage and clearancemeasurement forSecuring of parts



Information Technologyequipments Creepage distances







tests performed




Determination of workingvoltage




Discharge of capacitorsin equipments

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.2.1.1.7/


Information Technologyequipments Drop test




Energy hazardmeasurement test

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clause2.1.1.5,2.1.1.8, 2.1.2,2.1.3/



Force test for Handlesand manual control




Force test for Wall orceiling mountedequipment



Information Technologyequipments Humidity conditioning




Inspection of Edges andcorners




Insulation betweenprimary circuits andcable distributionsystems (Voltage surgetest)

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.7.4/






tests performed




Limited power sourcesmeasurement test




Measurement ofTransient Voltages (a.Transients from Mainssupply)

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no. 2.10.3.9/


Information Technologyequipments Openings in enclosures

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clause 4.6/



Protection againsthazardous moving parts

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Cl.no.4.4



Protection fromhazardous voltages

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Cl.6.1.1/



Protection of equipmentusers from overvoltageson telecommunicationnetworks

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clause 6.2.2.1/



Protection requirementsfor safety interlocks

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no. 2.8.1, 2.8.2,2.8.3/



Protective earthingconductors andprotective bondingconductors

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no. 2.6.3.1,2.6.3.2, 2.6.3.3,2.6.3.4, 2.6.3.5/



Resistance to abnormalheat

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Clause.4.5.5






tests performed




SELV Circuitsmeasurement test

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clause 2.2.2, 2.2.3,2.2.4/


Information Technologyequipments Stability



Information Technologyequipments Steady force test

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no. 4.2.1, 4.2.2,4.2.2, 4.2.3, 4.2.4/


Information Technologyequipments Stress relief test

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Clno.4.2.7/


Information Technologyequipments Thermal requirements

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950- 1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Clause 4.5.1, 4.5.2,4.5.3, 4.5.4/:


Information Technologyequipments Thermal requirements

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Clause 4.5.1, 4.5.2,4.5.3, 4.5.4/



TNV circuits limitsmeasurement test

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.2.3.1/



Torque test for Directplug-in equipment







tests performed




Visual Inspection andData evaluation forBatteries

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Cl.no.4.3.8,



Visual Inspection andData evaluation for Oiland grease

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2:2013/Cl.no.4.3.9/



Visual Inspection ofConnection by plugs andsockets




Visual Inspection ofHeating elements inearthed equipments




Wiring, connections andsupplies: Cord anchorageand dimensionmeasurement

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.no.3/

112 ELECTRONICS- ITEQUIPMENT IT Equipment Input current

Measurement Test


113 ELECTRONICS- ITEQUIPMENT IT Equipment Verification of Durability

of Markings

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013

114 ELECTRONICS- ITEQUIPMENT IT Equipment Verification of Marking

and Instructions

IS 13252 part 1 : 2010 A1:2013 + A2:2015 / UL 60950-1:2017 / CSA C22.2No.60950-1-07/IEC 60950-1:2005 &A1:2009 + A2: 2013/Cl.1.7.2/

115 ELECTRONICS- POWERSUPPLIES & STABILIZERS

Uninterruptible PowerSystems (UPS)

Construction Details -Openings

IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 7.4.2)


Uninterruptible PowerSystems (UPS) Limited Current circuits IEC 62040-1: 2008 IS 16242(Part

1):2014 (Clause 5.2.3) (Clause 2.4/RD)






tests performed



Power converters for usein Photovoltaic PowerSystems

(Cl.: 7, 7.2) - Protectionagainst electric shock &Energy Hazard

IS 16221 (Part 2):2015/ IEC 62109-2:2011(Cl.:7) IS 16221 (Part 1):2016/ IEC62109-1 Ed. 1.0 2010-04, (Cl.:7.2)



Cl 4.4 - Testing in singlefault condition

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.4.4



Cl. 4.4.4.15.2.2 - Fault-Tolerance of AutomaticDisconnecting Means

IS 16221(Part 2):2015 IEC 62109-2:2011 (Cl. 4.4.4.15.2.2)



Cl. 4.4.4.15.2.3 -Automatic Checking ofthe Disconnect Means

IS 16221(Part 2):2015 IEC 62109-2:2011(Cl. 4.4.4.15.2.3)



Cl. 4.4.4.16 - Standaloneinverters - load transfertests

IS 16221(Part 2):2015 IEC 62109-2:2011 (Cl. 4.4.4.16)



Cl. 4.4.4.17 - Coolingsystem failure -Blanketing test

IS 16221(Part 2):2015 IEC 62109-2:2011 (Cl. 4.4.4.17)



Cl. 4.7.4 - Stand-aloneInverter AC outputvoltage and frequency

IS 16221(Part 2):2015 IEC 62109-2:2011



Cl. 4.7.5 - Stand-aloneInverter output voltagewaveform

IS 16221(Part 2):2015 IEC 62109-2:2011



Cl. 4.8.2.1 - Arrayinsulation resistancedetection for invertersfor ungrounded arrays

IS 16221(Part 2):2015 IEC 62109-2:2011



Cl. 4.8.3.2 - 30 mA touchcurrent type test forisolated inverters

IS 16221(Part 2):2015 IEC 62109-2:2011



Cl. 4.8.3.5 - Protection Byapplication of RCD’s

IS 16221(Part 2):2015 IEC 62109-2:2011



Cl. 5 - Marking andDocumentation

IS 16221(Part 2):2015 IEC 62109-2:2011






tests performed




Cl. 5.1.2 - Durability ofmarkings

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.2



Cl. 5.1.3 - Identification IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.3



Cl. 5.1.4 - Equipment’sRatings

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.4



Cl. 7.3.6.2 - InsulationBetween Live Parts andAccessible ConductiveParts

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 7.3.6.3 - ProtectiveClass I - Protectivebonding and earthing

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 7.3.6.3.7 - ExternalProtective EarthingConductor

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 7.3.7 - InsulationIncluding Clearance andCreepage distances

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 7.3.7.4 - ClearanceDistances

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 7.3.7.5 - CreepageDistances

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 7.3.7.8.2 -Requirements forElectrical WithstandCapability of SolidInsulation

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 7.3.8 - ResidualCurrent Detection (RCD)or Monitoring (RCM)device compatibility

IS 16221(Part 1):2016 IEC 62109-1:2010






tests performed




Cl. 7.3.9 - Protectionagainst shock hazarddue to stored energy

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 7.4 - Protectionagainst energy hazards

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 7.5.1- ImpulseVoltage Test

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 7.5.2 - Voltage Test IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 7.5.3 - PartialDischarge test

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 7.5.4 - Touch currentmeasurement

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 7.5.5 - Equipment’swith multiple sources ofsupply

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 8.2 - Moving Parts IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 8.3 - Stability IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 8.4 - Provisions fortilting and carrying

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl. 8.5 - Wall Mounting IS 16221(Part 1):2016 IEC 62109-1:2010 Cl. 8.5



Cl. 8.6 - Expelled Parts IS 16221(Part 1):2016 IEC 62109-1:2010






tests performed




Cl. 9.1.1, 9.1.2, 9.1.3 -Protection against fire

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.:11 & 12 - Protectionagainst liquid hazards &Chemical Hazards

IS 16221 (Part 2):2015/ IEC 62109-2:2011



Cl.:13 - Physicalrequirement

IS 16221 (Part 2):2015/ IEC 62109-2:2011 (Cl.:13) IS 16221 (Part 1):2016/IEC 62109-1 Ed. 1.0 2010-04, (Cl.:13.1,13.2,13.3,13.4,13.5,13.6,13.7,13.8)



Cl.:8 - Protection againstmechanical hazards

IS 16221 (Part 2):2015/ IEC 62109-2:2011



Cl.:9 - Protection againstFire Hazards

IS 16221 (Part 2):2015/ IEC 62109-2:2011



Cl.11 - Protection againstliquid hazards

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.11



Cl.12 - Chemical Hazard IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.13.1 - Handles andManual controls

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.13.2 - Securing ofparts

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.13.3.2 - Connection toan a.c mains supply

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.13.3.2.5 - Cordanchorages and strainrelief

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.13.3.3 - Wiringterminals for connectionof external conductors

IS 16221(Part 1):2016 IEC 62109-1:2010






tests performed




Cl.13.3.4 - Supply wiringspace

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.13.3.6 - Disconnectionfrom supply sources

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.13.3.7 - Connectors,Plugs and Sockets

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.13.3.8 - Direct plug-inequipment

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.13.4 - Internal wiringand connections

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.13.5 - Openings inenclosure

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.13.6.2.1 - Stress reliefTest

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.13.7 - Mechanicalresistance to deflection,impact, or drop

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.13.8 - Thicknessrequirement for metalenclosures

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.4.3 - Thermal Testing IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.4.3



Cl.4.5 - Humiditypreconditioning

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.4.5



Cl.4.6 - Back-feedvoltage protection

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.4.6






tests performed




Cl.4.7 - Electrical ratingstests

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.4.7



Cl.5 - Marking andDocumentation

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5



Cl.5.1.5 - FuseIdentification

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.5



Cl.5.1.6 - Terminals,Connections and controls

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.5.1.7 - Switches andCircuit breakers

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.7



Cl.5.1.8 - Class IIEquipment

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.8



Cl.5.1.9 - Terminal boxesfor external connections

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.1.9



Cl.5.2 - WarningMarkings

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.2



Cl.5.3 - Documentation IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.5.3



Cl.6, 6.1, 6.2, 6.3 -EnvironmentalCategories and minimumenvironmental conditions

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.6, 6.1, 6.2, 6.3



Cl.6, 6.1, 6.2, 6.3 -EnvironmentalCategories and minimumenvironmental conditions

IS 16221(Part 2):2015 IEC 62109-2:2011






tests performed




Cl.7.2 - Protectionagainst Electric Shockand Energy Hazards -Fault conditions

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.7.2



Cl.7.3.2.6 - Protectionagainst Electric Shockand Energy Hazards -Working voltage andDVC

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.7.3.2.6



Cl.7.3.4.2.3 - Protectionagainst Electric Shockand Energy Hazards -Access Probe tests

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.7.3.4.2.3



Cl.7.3.4.2.4 - Protectionagainst Electric Shockand Energy Hazards -Service access areas

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.7.3.4.3 - Protection bymeans of Insulation oflive parts

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.7.3.5.3.1 - Limitationof Current ThroughProtective Impedance

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.7.3.5.3.2 - Limitationof discharging energythrough protectiveimpedance

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.9.1.4 - Openings inenclosure

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.9.1.4



Cl.9.2 - Limited PowerSources

IS 16221(Part 1):2016 IEC 62109-1:2010



Cl.9.3 - Short-Circuit andovercurrent protection

IS 16221(Part 1):2016 IEC 62109-1:2010 Cl.9.3






tests performed



Uninterruptible PowerSystems (UPS) Capacity Test BEE schedule 17: 2016/ IS 13314



Cl.7.11 - Total HarmonicDistortion BEE schedule 17: 2016/ IS 13314


Uninterruptible PowerSystems (UPS) Cl.7.6 - High Voltage Test BEE schedule 17: 2016/ IS 13314



Cl.7.7 - Insulationresistance Test BEE schedule 17: 2016/ IS 13314



Cl.7.8,7.8.1,7.8.2 - No-Load test BEE schedule 17: 2016/ IS 13314


Uninterruptible PowerSystems (UPS) Cl.7.9.3 - Efficiency BEE schedule 17: 2016/ IS 13314


Uninterruptible PowerSystems (UPS) Power Factor BEE schedule 17: 2016/ IS 13314




IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 8.3) (Clause 5.3/RD)



AC and d.c. powerisolation



Uninterruptible PowerSystems (UPS) Backfeed Protection IEC 62040-1: 2008 IS 16242(Part

1):2014 (Clause 5.1.4 and Annex I)


Uninterruptible PowerSystems (UPS) Battery

IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 4.7.20) (Clause2.1.1.5/RD)


Uninterruptible PowerSystems (UPS) Case insulation IEC 62040-1: 2008 IS 16242(Part

1):2014 (Clause 7.6.4)



Clearances, creepagedistances and distancesthrough insulation




Connection to Power -General provisions forconnection to power

IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 6.2.1) (Clause 3.2/RD)



Connection totelecommunicationnetworks

IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 9) (Clause 6/RD,3.5/RD)






tests performed



Uninterruptible PowerSystems (UPS) Durability of markings

IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 4.7.16) (Clause1.7.11/RD)


Uninterruptible PowerSystems (UPS) Equipment movement IEC 62040-1: 2008 IS 16242(Part

1):2014 (Clause 7.4.4)


Uninterruptible PowerSystems (UPS) External Signaling Circuit IEC 62040-1: 2008 IS 16242(Part

1):2014 (Clause 5.2.4) (Clause 3.5/RD)



General provisions forearth leakage

IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 8.1) (Clause 5.1.1/RD)


Uninterruptible PowerSystems (UPS) High Leakage Current

IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 4.7.13) (Clause4.7.13/RD)


Uninterruptible PowerSystems (UPS) Limited Power sources IEC 62040-1: 2008 IS 16242(Part

1):2014 (Clause 5.2.5) (Clause 2.5/RD)


Uninterruptible PowerSystems (UPS) Mechanical Strength IEC 62040-1: 2008 IS 16242(Part

1):2014 (Clause 7.3) (Clause 4.2/RD)



Over current and earthfault protection



Uninterruptible PowerSystems (UPS) Power Interfaces IEC 62040-1: 2008 IS 16242(Part

1):2014 (Clause 4.6) (Clause 1.6.2/RD)



Protection for UPSintended to be used inoperator access areas

IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 5.1.1) (Clause 2.1.1/RD)



Protection for UPSintended to be used inrestricted access areas




Protection for UPSintended to be used inservice access areas



Uninterruptible PowerSystems (UPS) Protective bonding IEC 62040-1: 2008 IS 16242(Part

1):2014 (Clause 5.3.3) (Clause 2.6/RD)


Uninterruptible PowerSystems (UPS) Protective earthing IEC 62040-1: 2008 IS 16242(Part

1):2014 (Clause 5.3.2) (Clause 2.6/RD)



Protective earthing andprotective bonding







tests performed



Uninterruptible PowerSystems (UPS) Resistance to fire IEC 62040-1: 2008 IS 16242(Part

1):2014 (Clause 7.5) (Clause 4.7/RD)



Safety extra low voltagecircuits - SELV



Uninterruptible PowerSystems (UPS) Stability IEC 62040-1: 2008 IS 16242(Part

1):2014 (Clause 7.2) (Clause 4.1/RD)



Telephone networkvoltage circuits - TNV



Uninterruptible PowerSystems (UPS) Temperature rise IEC 62040-1: 2008 IS 16242(Part

1):2014 (Clause 7.7) (Clause 4.5/RD)



Verification of Markingsand Instructions

IEC 62040-1: 2008 IS 16242(Part1):2014 (Clause 4.7)



Wiring terminals forexternal powerconductors


234 ELECTRONICS- POWERSUPPLIES & STABILIZERS UPS / INVERTER

Clause No:5.6 -Protection of Personnel -Safety Interlocks

IS 16242 (Part 1)

235 ELECTRONICS- POWERSUPPLIES & STABILIZERS UPS / INVERTERS

Clause No:5.6 -Protection of Personnel -Safety Interlocks

IEC 62040-1

236 ELECTRONICS- POWERSUPPLIES & STABILIZERS UPS / INVERTERS Clause No:8.2 - Electric

strength IEC 62040-1

237 ELECTRONICS- POWERSUPPLIES & STABILIZERS UPS / Inverters Clause No:8.2 - Electric

strength IS 16242(Part 1)


Utility-InterconnectedPhotovoltaic Inverters

Clause 6 -Test for Singleor Multi-Phase Inverter

IS 16169:2014 (Clause. 6) IEC62116:2014 (Clause. 6)


Utility-InterconnectedPhotovoltaic Inverters

Clause 7 -Documentation

IS 16169:2014 (Clause. 7) IEC62116:2014 (Clause. 7)

240 ELECTRONICS- SAFETYTESTING FACILITY

Audio/Video, Informationand CommunicationTechnology Equipment

(Clause 4.2) - EnergySource Classifications IEC 62368-1 (ed 3:2018) (Clause 4.2)



(Clause 4.4.3.2, AnnexT3, T5) - Steady forcetests

IEC 62368-1 (ed 3:2018






tests performed




(Clause 4.4.3.3, AnnexT7) - Drop Tests IEC 62368-1 (ed 3:2018)



(Clause 4.4.3.4, AnnexT6) - Impact test IEC 62368-1 (ed 3:2018)



(Clause 4.4.3.6, AnnexT9) - Glass Impact Test IEC 62368-1 Ed 3:2018



(Clause 4.4.3.7, AnnexT9) - Glass fixation test IEC 62368-1 ed 3:2018



(Clause 4.4.3.8, AnnexT8) - Thermoplasticmaterial test

IEC 62368-1 ed 3:2018



(Clause 4.4.3.9, Annex T)- Air comprising asafeguard

IEC 62368-1 ed 3:2018



(Clause 4.4.5, Annex K) -Safety Interlocks IEC 62368-1 ed 3:2018



(Clause 4.6) - Fixing ofConductors IEC 62368-1 (ed 3:2018)



(Clause 4.7) - Equipmentfor direct insertion in tomains socket-outlets

IEC 62368-1 (ed 3:2018)



(Clause 4.8.4.6) - Crushtest IEC 62368-1(ed 3:2018)



(Clause 4.8.5) -Compliance criteria(Force test)

IEC 62368-1 (ed 3:2018)






tests performed




(Clause 5.4.10.1) -Safeguards againsttransient voltages fromexternal circuits(Requirements)

IEC 62368-1 (ed 3:2018)



(Clause 5.4.10.2.2) -Impulse test IEC 62368-1 (ed 3:2018)



(Clause 5.4.10.2.3) -Steady-state test(electric strength test)

IEC 62368-1 (ed 3:2018)



(Clause 5.4.10.3) -Compliance criteria (IRtester)

IEC 62368-1 (ed 3:2018)



(Clause 5.4.4.5) -Insulating compoundforming cemented joints

IEC 62368-1 (ed 3:2018)



(Clause 5.4.4.6.1,5.4.4.6.2, 5.4.4.6.3,5.4.4.6.4 ) - Thin sheetmaterial

IEC 62368-1 (ed 3:2018)



(Clause 5.4.4.6.5) -Mandrel test IEC 62368-1 (ed 3:2018)



(Clause 5.4.4.7) -Solidinsulation in woundcomponents

IEC 62368-1 (ed 3:2018)



(Clause 5.4.4.8) -Compliance criteria IEC 62368-1 (ed 3:2018)



(Clause 5.4.5.2) -Antenna TerminalInsulation- Test Method

IEC 62368-1 (ed 3:2018)



(Clause 5.4.6) -Insulation of internal wire IEC 62368-1 (ed 3:2018)






tests performed




(Clause 5.4.8) - Humidityconditioning IEC 62368-1 (ed 3:2018)



(Clause 5.5) -Components assafeguard

IEC 62368-1 (ed 3:2018)



(Clause 5.6.3) -Requirements forProtective earthingconductors

IEC 62368-1 (ed 3:2018)



(Clause 5.6.5) -Terminals for protectiveconductors

IEC 62368-1 (ed 3:2018)



(Clause 5.6.6) -Resistance of theProtective BondingSystem (Earth bond test)

IEC 62368-1 (ed 3:2018)



(Clause 5.6.7) - Reliableconnection of aprotective earthingconductor

IEC 62368-1 (ed 3:2018)



(Clause 8.12 & AnnexT.11) - Telescoping orrod antennas

IEC 62368-1 (ed 3:2018)



(clause no. 4.8.4.2) -Stress relief test IEC 62368-1 (ed 3:2018)



(clause no. 4.8.4.3) -Battery replacement test IEC 62368-1 (ed 3:2018)



(clause no. 4.8.4.4) -Drop test IEC 62368-1 (ed 3:2018)



(clause no. 4.8.4.5) -Impact test IEC 62368-1 (ed 3:2018)






tests performed




Annex F - Equipmentmarkings, instructions,and instructionalsafeguards

IEC 62368-1 (ed 3:2018



Annex B.2.5 - Input test IEC 62368-1 (ed 3:2018)



Annex B.3 - Simulatedabnormal operatingconditions

IEC 62368-1 (ed 3:2018)



Annex B.4 -Simulatedsingle fault conditions IEC 62368-1 (ed 3:2018)



Annex D - Test Generator IEC 62368-1 (ed 3:2018)



Annex G.5.3 -Transformers IEC 62368-1 (ed 3:2018)



Annex G.5.4 - Motors IEC 62368-1 (ed 3:2018)



Annex G.7.2 - Mainsupply cords (Crosssectional area)

IEC 62368-1 (ed 3:2018)



Annex G.7.3 - Cordanchorages and strainrelief for non detachablepower supply cords

IEC 62368-1 (ed 3:2018)



Annex G.7.4 - Cord entry IEC 62368-1 (ed 3:2018)



Annex G.7.5 - Non-detachable cord bendprotection

IEC 62368-1 (ed 3:2018)






tests performed




Annex G.7.6.1 - Supplywiring spaces IEC 62368-1 (ed 3:2018)



Annex H - Criteria fortelephone ringing signals(TNV circuit test)

IEC 62368-1 (ed 3:2018)



Annex K -Safetyinterlocks IEC 62368-1 (ed 3:2018)



Annex L - Disconnectdevices IEC 62368-1 (ed 3:2018)



Annex P - Safeguardsagainst conductiveobjects

IEC 62368-1 (ed 3:2018)



Annex Q - Circuitsintended forinterconnection withbuilding wiring

IEC 62368-1 (ed 3:2018)



Annex T.1,T.2,T.3,T.4&T5 - Mechanicalstrength tests

IEC 62368-1 (ed 3:2018)



Annex T.10 - Glassfragmentation test IEC 62368-1 (ed 3:2018)



Annex T.6 & T.9 -Enclosure impact test IEC 62368-1 (ed 3:2018)



Annex T.7 - Drop test IEC 62368-1 (ed 3:2018)



Annex T.8 - Stress relieftest IEC 62368-1 (ed 3:2018)



Annex V - Determinationof accessible parts IEC 62368-1 (ed 3:2018)






tests performed




Clause - 8.5.4: SpecialCategories of equipmentcontaining moving parts

IEC 62368-1



Clause 4.1.3 - Equipmentdesign and construction IEC 62368-1 ed 3:2018



Clause 4.3 - ProtectionAgainst Energy Sources IEC 62368-1 (ed 3:2018)



Clause 4.4.3.10, AnnexT10 - Compliance criteria IEC 62368-1 ed 3:2018



Clause 4.4.3.5, Annex T3- Internal accessiblesafeguard test

IEC 62368-1 ed 3:2018



Clause 4.5, Annex M -Explosion IEC 62368-1 ed 3:2018



Clause 5.3.2.1 -Accessibility to electricalenergy sources andsafeguards-Requirements

IEC 62368-1 (ed 3:2018)



Clause 5.3.2.2 - Contactrequirements IEC 62368-1 (ed 3:2018)



Clause 5.3.2.3 -Compliance criteria IEC 62368-1 (ed 3:2018)



Clause 5.3.2.4 -Terminals for connectingstripped wire

IEC 62368-1 (ed 3:2018)



Clause 5.4.1.10.3 - Ballpressure test IEC 62368-1 (ed 3:2018)






tests performed




Clause 5.4.1.3 -Compliance criteria(humidity treatment)

IEC 62368-1 (ed 3:2018)



Clause 5.4.1.4 -Maximum operatingtemperature(Temperaturemeasurement)

IEC 62368-1 (ed 3:2018)



Clause 5.4.1.6 -Insulation intransformers withvarying dimensions

IEC 62368-1 (ed 3:2018)



Clause 5.4.1.7 -Insulation in circuitsgenerating startingpulses

IEC 62368-1 (ed 3:2018)



Clause 5.4.1.8 -Determination of workingvoltage

IEC 62368-1 (ed 3:2018)



Clause 5.4.2, 5.4.3 -Clearance, creepage IEC 62368-1 (ed 3:2018)



Clause 5.4.4.1 - Solidinsulation – Generalrequirements

IEC 62368-1 (ed 3:2018)



Clause 5.4.4.2 - Minimumdistance throughinsulation

IEC 62368-1 (ed 3:2018)



Clause 5.4.4.3 -Insulating compoundforming solid insulation

IEC 62368-1 (ed 3:2018)



Clause 5.4.4.4 - Solidinsulation insemiconductor devices

IEC 62368-1 (ed 3:2018)



Clause 5.4.5.3 - AntennaTerminal Insulation-Compliance criteria

IEC 62368-1 (ed 3:2018)






tests performed




Clause 5.4.7 - Tests forsemiconductorcomponents and forcemented joints

IEC 62368-1 (ed 3:2018)



Clause 5.4.9 - Electricstrength test IEC 62368-1 (ed 3:2018)



Clause 5.6.8 - Functionalearthing IEC 62368-1 (ed 3:2018)



Clause 5.7 - Prospectivetouch voltage, touchcurrent and protectiveconductor current

IEC 62368-1 (ed 3:2018)



Clause 5.8 - Backfeedsafeguard in batterybacked up supplies

IEC 62368-1 (ed 3:2018)



Clause 6.2.2 - Powersource circuitclassification

IEC 62368-1 (ed 3:2018)



Clause 6.2.3 -Classification of potentialignition source

IEC 62368-1 (ed 3:2018)



Clause 6.3 - Safeguardsagainst fire under normaloperating conditions andabnormal operatingconditions

IEC 62368-1 (ed 3:2018)



Clause 6.4.3 - Reductionof the likelihood ofignition under singlefault conditions in PS2circuits and PS3 circuits

IEC 62368-1 (ed 3:2018)



Clause 6.4.5 - Control offire spread in PS2 circuits IEC 62368-1 (ed 3:2018)






tests performed




Clause 6.4.6 - Control offire spread in PS3 circuits IEC 62368-1 (ed 3:2018)



Clause 6.4.7 - Separationof combustible materialsfrom a PIS

IEC 62368-1 (ed 3:2018)



Clause 6.4.8 - Fireenclosures and firebarriers

IEC 62368-1 (ed 3:2018)



Clause 6.5 - Internal andexternal wiring IEC 62368-1 (ed 3:2018)



Clause 6.6 - Safeguardsagainst fire due to theconnection of additionalequipment

IEC 62368-1 (ed 3:2018)



Clause 7 - Injury causedby hazardous substances IEC 62368-1 (ed 3:2018)



Clause 8.10.3 - Cart,stand or carrier loadingtest

IEC 62368-1 (ed 3:2018)



Clause 8.10.4 - Cart,stand or carrier impacttest

IEC 62368-1 (ed 3:2018)



Clause 8.10.6 -Thermoplastictemperature stability

IEC 62368-1 (ed 3:2018)



Clause 8.11 - Mountingmeans for rack mountedequipment

IEC 62368-1 (ed 3:2018)



Clause 8.2 - Mechanicalenergy sourceclassification

IEC 62368-1 (ed 3:2018)



Clause 8.4 -SafeguardsAgainst Parts with SharpEdges and Corners

IEC 62368-1 (ed 3:2018)






tests performed




Clause 8.5.3 -Compliance criteria(Safeguards Againstmoving parts)

IEC 62368-1 (ed 3:2018)



Clause 8.6.2 - Staticstability IEC 62368-1 (ed 3:2018)



Clause 8.6.3 - Relocationstability IEC 62368-1 (ed 3:2018)



Clause 8.6.4 - Glass sidetest IEC 62368-1 (ed 3:2018)



Clause 8.6.5 - Horizontalforce test IEC 62368-1 (ed 3:2018)



Clause 8.7 - Equipmentmounted to a wall orceiling

IEC 62368-1 (ed 3:2018)



Clause 8.8 - Handlestrength IEC 62368-1 (ed 3:2018)



Clause 8.9 - Wheels orcasters attachmentrequirement

IEC 62368-1 (ed 3:2018)



Clause 9.2 - Thermalenergy classification IEC 62368-1 (ed 3:2018)



Clause 9.3 - TouchTemperature limit IEC 62368-1 (ed 3:2018)



Clause 9.6 -Requirements forwireless powertransmitters

IEC 62368-1 (ed 3:2018)






tests performed




Clause No. 4.10.1 -ComponentsRequirement (Disconnectdevice)

IEC 62368-1 (ed 3:2018)



Clause No. 4.10.2 -ComponentsRequirement (Switchesand relays)

IEC 62368-1 (ed 3:2018)



Clause No. 4.9 -Likelihood of fire orshock due to entry ofconductive object

IEC 62368-1 (ed 3:2018)



Clause No. 5.2 -Classification and limitsof electrical energysources

IEC 62368-1 (ed 3:2018)



Clause No. 5.4.1.9 -Insulating surfaces IEC 62368-1 (ed 3:2018)



Clause No. 5.4.11 -Separation betweenexternal circuits andearth

IEC 62368-1 (ed 3:2018)



Clause No. 5.6.4.3 -Compliance criteria(Measurement ofprotective bondingconductor)

IEC 62368-1 (ed 3:2018)


dio/Video, Informationand CommunicationTechnology Equipment

Clause 8.10.5 -Mechanical stability IEC 62368-1 (ed 3:2018)


Radio TransmittingEquipment

Annex A - Creepage andClearance distances

IEC 60215 (Edition 4):2016 Annex A IS10437:2019 Annex A



Cl 5.3 - Fault conditionsTests

IEC 60215 (Edition 4):2016 Cl 5.3 IS10437:2019 Cl 5.3



Cl 6.3.2 - Resistance ToHumidity

IEC 60215 (Edition 4):2016-04 Cl 6.3.2IS 10437:2019 Cl 6.3.2






tests performed




Cl 6.3.3 - Resistance toIngress of Water

IEC 60215 (Edition 4):2016 Cl 6.3.3 IS10437:2019 Cl 6.3.3



Cl 6.4 - MarkingsRelevant to Safety

IEC 60215 (Edition 4):2016 Cl 6.4 IS10437:2019 Cl 6.4



Cl.7.1 - Protectionagainst Harmful electricShock and Radio -Frequency Skin burns

IEC 60215 (Edition 4):2016 Cl.7.1 IS10437:2019 Cl 7.1


Radio TransmittingEquipment Cl.7.2 - Earthing IEC 60215 (Edition 4):2016 Cl.7.2 IS

10437:2019 Cl 7.2


Radio TransmittingEquipment Cl.7.3 - Enclosures IEC 60215 (Edition 4):2016 Cl.7.3 IS

10437:2019 Cl 7.3



Cl.7.4 - Mechanicalconsiderationsconcerning safetydevices




Cl.7.5 -Wiring andtermination



Radio TransmittingEquipment Cl.7.6 - Insulation IEC 60215 (Edition 4):2016 Cl.7.6 IS

10437:2019 Cl 7.6



Cl.7.7 - Voltages at theradio-frequency outputconnection




Cl.8.2 - HighTemperatures

IEC 60215 (Edition 4):2016 Cl.8.2 IS10437:2019 Cl8.2


Radio TransmittingEquipment Cl.8.3 - Fire IEC 60215 (Edition 4):2016 Cl.8.3 IS

10437:2019 Cl8.3


Radio TransmittingEquipment Cl.8.4.2 - Implosion IEC 60215 (Edition 4):2016 Cl.8.4.2 IS

10437:2019 Cl8.4.2

REACT LABORATORIES, 3411, 3RD FLOOR, SERVICE ROAD ...

Documents