Description The RCK-1 is a single-cylinder, single-stage, dual-action compressor that simulates the mechanical function of an industrial reciprocating compressor. The RCK-1 incorporates transducers in accordance with API 618 Reciprocating Compressor Best Practices, which provides for measurement of Crank Frame Velocity, Crosshead Acceleration, Rod Position, Crank and Head End Cylinder Pressure, Gas and Valve temperature for both Suction and Discharge, along with Single-Event and Multi-Event Timing. The RCK-1 is a research and development tool which can simulate common reciprocating compressor faults such as valve and piston ring leaks, as well as mechanical drive train wear in the form of connecting rod bearing clearance. The kit equips each head with a pair of Bypass Blocks (patent pending) that allow you to induce small valve leaks at any of the suction or discharge valves. You can then detect the leak directly with analysis of the Pressure vs. Volume characteristics, or indirectly with analysis of the Gas and Valve temperature outputs. When used with the prescribed Bently Nevada Machinery Management hardware and software, the kit is a valuable training tool for demonstrating the operation of our reciprocating compressor machinery management solution. RCK-1 Reciprocating Compressor Kit Datasheet Bently Nevada Machinery Condition Monitoring 181384 Rev. C
5
Embed
RCK-1 Reciprocating Compressor Kit Datasheet - 181384...compressor that simulates the mechanical function of an industrial reciprocating compressor. The RCK-1 incorporates transducers
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DescriptionThe RCK-1 is a single-cylinder, single-stage, dual-action compressor that simulates the mechanical function of an industrial reciprocating compressor. The RCK-1 incorporates transducers in accordance with API 618 Reciprocating Compressor Best Practices, which provides for measurement of Crank Frame Velocity, Crosshead Acceleration, Rod Position, Crank and Head End Cylinder Pressure, Gas and Valve temperature for both Suction and Discharge, along with Single-Event and Multi-Event Timing.
The RCK-1 is a research and development tool which can simulate common reciprocating compressor faults such as valve and piston ring leaks, as well as mechanical drive train wear in the form of connecting rod bearing clearance. The kit equips each head with a pair of Bypass Blocks (patent pending) that allow you to induce small valve leaks at any of the suction or discharge valves. You can then detect the leak directly with analysis of the Pressure vs. Volume characteristics, or indirectly with analysis of the Gas and Valve temperature outputs.
When used with the prescribed Bently Nevada Machinery Management hardware and software, the kit is a valuable training tool for demonstrating the operation of our reciprocating compressor machinery management solution.
RCK-1 Reciprocating Compressor KitDatasheet 181384 Rev. C
Ordering InformationFor the detailed listing of country and product specific approvals, refer to the Approvals Quick Reference Guide (108M1756) available from www.Bently.com.
SLOT 4 3500/65-02-00 16-Channel Temperature Monitor.
3500/65-02-01 if FM(C/US) Approval is desired.
SLOT 5 3500/72M-02-00 Rod Position Monitor.
3500/72M-02-01 if CSA/NRTL/C Approval is desired.
SLOT 6 Empty Slot.
SLOT 7 (Upper)
3500/25-01-02-00 Keyphasor Module.
3500/25-01-02-01 if CSA/NRTL/C Approval is desired.
SLOT 8 Empty Slot.
3500/01-01 Rack Configuration Software and Configuration Manual.
Cables
129525-A0005-02
3500 Transducer Signal to External Termination Block Cable. Quantity of 3.
134544-A0005-02
3500 Transducer Signal to External Termination Block Cable. Quantity of 1.
129530-A0005-02
3500 Transducer Signal to External Termination Block Cable. Quantity of 1.
3/5
RCK-1 Reciprocating Compressor KitDatasheet 181384 Rev. C
SoftwarePlease contact your Bently Nevada salesperson for ordering information concerning the most recent System 1 Recip Solutions Software.
4/5
RCK-1 Reciprocating Compressor KitDatasheet 181384 Rev. C
Copyright 2020 Baker Hughes Company. All rights reserved.
Bently Nevada, Orbit Logo, and Keyphasor are registered trademarks of Bently Nevada, a Baker Hughes Business, in the United States and other countries. The Baker Hughes logo is a trademark of Baker Hughes Company. All other product and company names are trademarks of their respective holders. Use of the trademarks does not imply any affiliation with or endorsement by the respective holders.
Baker Hughes provides this information on an “as is” basis for general information purposes. Baker Hughes does not make any representation as to the accuracy or completeness of the information and makes no warranties of any kind, specific, implied or oral, to the fullest extent permissible by law, including those of merchantability and fitness for a particular purpose or use. Baker Hughes hereby disclaims any and all liability for any direct, indirect, consequential or special damages, claims for lost profits, or third party claims arising from the use of the information, whether a claim is asserted in contract, tort, or otherwise. Baker Hughes reserves the right to make changes in specifications and features shown herein, or discontinue the product described at any time without notice or obligation. Contact your Baker Hughes representative for the most current information.
The information contained in this document is the property of Baker Hughes and its affiliates; and is subject to change without prior notice. It is being supplied as a service to our customers and may not be altered or its content repackaged without the express written consent of Baker Hughes. This product or associated products may be covered by one or more patents. See Bently.com/legal.
1631 Bently Parkway South, Minden, Nevada USA 89423Phone: 1.775.782.3611 or 1.800.227.5514 (US only)
Bently.com
RCK-1 Reciprocating Compressor KitDatasheet 181384 Rev. C