NITRO ENGINES OFF ROAD 1/8
Characteristics
• The piston and the sleeve are match in order to offer maximum performances, maximum run time and bet-ter longevity. In fact, all RC Concept engines are «Team» engines.
• RC Concept has developed the cooling head after many tests. The fins oriented to the top allowed a better cooling of the engine. The airflow can more easily escape with the verticals fins of the RC Concept cooling head instead of being blocked like in the traditional heads. This allowed the RC Concept engine to run cooled, especially in hot conditions.
• The crankshaft is filled with silicon in order to improve the flow at the admission.
• The piston is machined and the rod got two bronze bushings.
• A quality control is done for every engine.
Technicals specifications
Power, smooth bottom end, reliability, RC Concept MC engines adopts a truly different look from traditional nitro engines.
The MC3 Ceramic engine is perfect for all drivers from the beginners to the local racers. Simplicity, quality and performances are waiting for you with the MC3, which is the most accessible engine of our MC line, nevertheless the MC3 got all the qualities of the RC Concept products. The engine is assembled in the RC Concept Workshop in France and has been subjected to a quality control performed by Sébastien Chaffardon.
Spare parts
RC Concept - 74 chemin du Martinet - 73420 DRUMETTAZ CLARAFOND - FRANCE+33 4 79 54 03 39 - [email protected] - www.rcconcept.net
MC3
- RC
Con
cept
- ja
nv 2
015
Ref MC3: 10000001B
NITRO ENGINES OFF ROAD 1/8
Characteristics
• The piston and the sleeve are match in order to offer maximum performances, maximum run time and better longevity. In fact, all RC Concept engines are «Team» engines.
• RC Concept has developed the cooling head after many tests. The fins oriented to the top allowed a better cooling of the en-gine. The airflow can more easily escape with the verticals fins of the RC Concept cooling head instead of being blocked like in the traditional heads. This allowed the RC Concept engine to run cooled, especially in hot conditions.
• Modifications are made to the sleeve in order to improve the engine filling and the combustion.
• The crankshaft is filled with silicon paste in order to improve the admission flow and weighted for quicker response.
• The piston is machined and the rod got two bronze bushings.• The rear bearing got ceramic balls in order to improve the effi-
ciency and the top end.• 6 and 7 mm venturies. • A quality control is done for every engine.
Technicals specifications
Power, smooth bottom end, reliability, RC Concept MC engines adopts a truly different look from traditional nitro engines.
The MC3 Ceramic engine is perfect for the racers from local to international level. Quality and performances are waiting for you with the MC3 Ceramic. The engine is assembled in the RC Concept Workshop in France and has been subjected to a quality control performed by Sébastien Chaffardon.
Spare parts
RC Concept - 74 chemin du Martinet - 73420 DRUMETTAZ CLARAFOND - FRANCE+33 4 79 54 03 39 - [email protected] - www.rcconcept.net
Ceramic
MC3
Cer
amic
- R
C Co
ncep
t - ja
nv 2
015
Ref MC3 Ceramic: 10000003V
NITRO ENGINES OFF ROAD 1/8
Characteristics
• The piston and the sleeve are match in order to offer maximum performances, maximum run time and better longevity. In fact, all RC Concept engines are «Team» engines.
• RC Concept has developed the cooling head after many tests. The fins oriented to the top allowed a better cooling of the engine. The airflow can more easily escape with the verticals fins of the RC Concept cooling head instead of being blocked like in the traditional heads. This allowed the RC Concept engine to run cooled, especially in hot conditions.
• The crankshaft is filled with silicon in order to improve the flow at the admission.
• The piston is machined and the rod got two bronze bushings.
• A quality control is done for every engine.
Technicals specifications
Power, smooth bottom end, reliability, RC Concept MC engines adopts a truly different look from traditional nitro engines.
The MC5 Ceramic engine is perfect for serious racing. He got simplicity, quality and perfomances. The engine is assembled in the RC Concept Workshop in France and has been subjected to a quality control performed by Sébastien Chaffardon.
Spare parts
RC Concept - 74 chemin du Martinet - 73420 DRUMETTAZ CLARAFOND - FRANCE+33 4 79 54 03 39 - [email protected] - www.rcconcept.net
MC5
- R
C Co
ncep
t - ja
nv 2
015
Ref MC5: 10000002R
NITRO ENGINES OFF ROAD 1/8
Characteristics
• The piston and the sleeve are match in order to offer maximum performances, maximum run time and better longevity. In fact, all RC Concept engines are «Team» engines.
• RC Concept has developed the cooling head after many tests. The fins oriented to the top allowed a better cooling of the engine. The airflow can more easily escape with the verticals fins of the RC Concept cooling head instead of being blocked like in the traditional heads. This allowed the RC Concept engine to run cooled, especially in hot conditions.
• Sleeve has been improved to provide more power.• The crankshaft is filled with silicon in order to improve the flow at the
admission and weighted for quicker response. • The piston is machined and the rod got two bronze bushings.• The rear bearing got ceramic balls in order to improve the efficiency
and the top end.• 6 and 7 mm venturies.
• A quality control is done for every engine.
Technicals specifications
Power, smooth bottom end, reliability, RC Concept MC engines adopts a truly different look from traditional nitro engines. The MC5 Ceramic engine is perfect for serious and professionals racers. High quality and performances are waiting for you with this high-end 5 ports. The engine is assembled in the RC Concept Workshop in France and has been subjected to a quality control performed by Sébastien Chaffardon.
Spare parts
RC Concept - 74 chemin du Martinet - 73420 DRUMETTAZ CLARAFOND - FRANCE+33 4 79 54 03 39 - [email protected] - www.rcconcept.net
Ceramic
MC5
Cer
amic
- R
C Co
ncep
t - ja
nv 2
015
Ref MC5 Ceramic: 10000004J
SPEED CONTROL
The SC120 ESC has passed many reliability tests, in various conditions; such has mod on-road and stock off road. In every conditions, our ESC was not over-heating and was given power during all the run.
Spare parts
RC Concept - 74 chemin du Martinet - 73420 DRUMETTAZ CLARAFOND - FRANCE+33 4 79 54 03 39 - [email protected] - www.rcconcept.net
Technicals specificationsFeuille1
Page 1
120A/760A
Motor compatible
1/10 and 1/12 On Road and Off Road
5-6 NiMH or 2S LiPo ≥ 3,5T (1/10 On Road), ≥ 5,5T (1/10 Off Road)
8-9 NiMH or 3S LiPo ≥ 5,5T (1/10 On Road), ≥ 8,5T (1/10 Off Road)
0,0003ohm
4-9S NiMH or 2-3S LiPo
BEC Output
Fan
Constant/Burst Current
Brushless Sensor / Sensorless ESC
Car compabible1/10 and 1/8 Crawlers
Motor limits
Resistance
Battery Cell Count
6V@3A
8V@0,2A, MAX 12,6V
SC12
0 -
RC C
once
pt -
janv
201
5
Ref SC120 : 4012010
ELECTRIC ENGINES 1/10
Characteristics
• Machined T6 aluminum parts• Wound stator of high purity copper, reduces the
resistance• High quality solders• Removable and replaceable rotor• Powerful neodymium magnets sintered• 2 sensor ports• Working with all ESC
This 1/10th electric motor line is perfect for everyone, from pro drivers to beginners. We tested them in on-road and off-road and we never get any issues of over-heating or under power.
RC Concept - 74 chemin du Martinet - 73420 DRUMETTAZ CLARAFOND - FRANCE+33 4 79 54 03 39 - [email protected] - www.rcconcept.net
Versions
• EC modified 5,5T (ref : 20400055)
• EC modified 6,5T (ref : 20400055)
• EC modified 7,5T (ref : 20400075)
• EC modified 8,5T (ref : 20400085)
• EC modified 9,5T (ref : 20400095)
• EC modified 10,5T (ref : 204000105)
• EC stock 13,5T (ref : 204000135)
Technicals specifications
EC -
RC
Conc
ept -
janv
201
5
BATTERIES
RC Concept - 74 chemin du Martinet - 73420 DRUMETTAZ CLARAFOND - FRANCE+33 4 79 54 03 39 - [email protected] - www.rcconcept.net
Lipo Versions
OM
EGA
- R
C Co
ncep
t - ja
nv 2
015
Item Voltage Size (mm) C Ref.OMEGA 3500 mAh TUBE SHORTY Lipo 7,4 95,5x46x25,5 40C 50C5135040T
OMEGA 4000 mAh TUBE STICK Lipo 7,4 139x45x25 30C 50C5140130TOMEGA 4500 mAh TUBE SHORTY Lipo 7,4 95,5x46x25,5 100C 50C5145000TOMEGA 4800 mAh TUBE SADDLE Lipo 7,4 70x48x25 20C 50C5148225TOMEGA 5000 mAh TUBE STICK Lipo 7,4 139x45x25 65C 50C5150165TOMEGA 5700 mAh TUBE SADDLE Lipo 7,4 70x48x25 100C 50C5157200TOMEGA 8000 mAh TUBE STICK Lipo 7,4 139x45x25 100C 50C5180100TOMEGA 5000 mAh DEAM Lipo 14,8 139x47x50 40C 50C5350140DOMEGA 5800 mAh DEAM Lipo 14,8 139x47x50 45C 50C5358145DOMEGA 8000 mAh DEAM Lipo 14,8 139x47x50 50C 50C5380150DOMEGA 2400 mAh Double prises Futaba + bec Format Mugen Lipo 7,4 88x29x16 - 51P5124M01
OMEGA 2700 mAh Double prises Futaba + bec Format Kyosho Lipo 7,4 55x30x30 - 51P5127K01
NiMH Versions
Item Voltage Size (mm) C Ref.OMEGA 1700 mAh Double prises Futaba + bec Format Mugen NiMH 6 87x31,7x17 - 51P5117M01
OMEGA 1700 mAh Double prises Futaba + bec Format Kyosho NiMH (format 3+2) 6 53x33x31,7 - 51P5117K01