Schaeffler UK Training Courses
Contact Us For more information please contact T: 0121 313 5885
E: [email protected] W: www.schaeffler.co.uk/uktraining
Course Overview
This course covers the fundamentals of bearing lubrication
including
both oil and grease, with an emphasis on grease lubrication.
The
course will explain the need to select the correct lubricant for
the
application and describe how the bearing operating parameters
such
as speed, load and temperature influence the lubricant
selection. The
importance of viscosity and providing the right quantity of
lubricant is
explained.
Rolling Bearing Lubrication Course
RBL
Learning ObjectivesThe aim of the course is to helpparticipants
understand the fundamentalsof bearing lubrication and why
selectingthe right type and quantity of lubricant isvital in order
to maximise bearing life. It isintended to show the importance
ofviscosity and how failure to meet thenecessary cleanliness can
severely impactbearing life.
Who Should AttendEngineers, technicians and maintenancepersonnel
responsible for bearingselection, bearing lubricationspecification
and selection andlubrication system design andmanagement.
Course ContentIntroduction to Rolling Friction
Rolling versus sliding frictionCoefficient of frictionBasic
concepts - boundary, mixed and fluid frictionFriction and
temperature
Introduction to Bearing LifeWhat life is requiredWhat affects
bearing lifeBasic life calculationDynamic equivalent loadFatigue
failureFatigue load limit
Bearing LifeBasic rating lifeWhat is L10 life?Adjusted rating
lifeExpanded adjusted rating life
LubricationBasic concepts of frictionOil versus grease
lubricationSelecting the right base oilSelecting the correct
operating viscosity
Grease LubricationTypes of greaseSelecting the correct
greaseInitial grease selectionImportant points to considerGrease
lubrication - the correct amountGrease lubrication - relubrication
intervalGreases available from SchaefflerGrease data sheet
Grease Operating LifeInfluencing factorsHow to calculate grease
lifeExample calculation
Bearing FailuresWhy do bearings fail?What is fatigue?Types of
failure
Course Information
Time 09:00 - 16:00
Days 1
Course Fee1-4 delegates Additional delegatesLarge groups
£295 per person£100 per personPrice onapplication
Course Venue Schaeffler UK, Sutton Coldfield/Customer Site
Schaeffler UK Training Courses
Schaeffler (UK) Ltd Forge Lane Minworth Sutton Coldfield West
Midlands B76 1AP Email: [email protected] Tel: 0121 313
5885
Introduction to Rolling Bearings£295 + VAT Per Person
RBT
RBM
IRB
Rolling Bearing Mounting £295 + VAT Per Person
Bearings for Electric Motors£295 + VAT Per Person
Rolling Bearing Technology£550 + VAT Per Person
BFEM
Introduction to Condition Monitoring £295 + VAT Per Person
ICM Detector III (available on request)£1,000 + VAT - Special
price forup to 5 delegates
DIII
Terms & ConditionsCourse Costs
Training Calendar 2015
Mon 1 8 15 22 29
Tue 2 9 16 23 30
Wed 3 10 17 24
Thur 4 11 18 25
Fri 5 12 19 26
Mon 4 11 18 25
Tue 5 12 19 26
Wed 6 13 20 27
Thur 7 14 21 28
Fri 1 8 15 22 29
Mon 5 12 19 26
Tue 6 13 20 27
Wed 7 14 21 28
Thur 1 8 15 22 29
Fri 2 9 16 23 30
Mon 2 9 16 23 30
Tue 3 10 17 24
Wed 4 11 18 25
Thur 5 12 19 26
Fri 6 13 20 27
Mon 2 9 16 23 30
Tue 3 10 17 24 31
Wed 4 11 18 25
Thur 5 12 19 26
Fri 6 13 20 27
Mon 2 9 16 23
Tue 3 10 17 24
Wed 4 11 18 25
Thur 5 12 19 26
Fri 6 13 20 27
RBL
RBFA
IRB
RBM
VAL1
VAL1
JANUARY FEBRUARY
MARCH APRIL
MAY JUNE
Mon 7 14 21 28
Tue 1 8 15 22 29
Wed 2 9 16 23 30
Thur 3 10 17 24 31
Fri 4 11 18 25
Mon 3 10 17 24 31
Tue 4 11 18 25
Wed 5 12 19 26
Thur 6 13 20 27
Fri 7 14 21 28
Mon 7 14 21 28
Tue 1 8 15 22 29
Wed 2 9 16 23 30
Thur 3 10 17 24
Fri 4 11 18 25
Mon 5 12 19 26
Tue 6 13 20 27
Wed 7 14 21 28
Thur 1 8 15 22 29
Fri 2 9 16 23 30
Mon 6 13 20 27
Tue 7 14 21 28
Wed 1 8 15 22 29
Thur 2 9 16 23 30
Fri 3 10 17 24 31
Mon 6 13 20 27
Tue 7 14 21 28
Wed 1 8 15 22 29
Thur 2 9 16 23 30
Fri 3 10 17 24
BFEM
IRB
VAL1
VAL1
JULY AUGUST
SEPTEMBER OCTOBER
NOVEMBER DECEMBER
ICM
ICM
RBM
RBL
RBT
RBT
RBT
RBT
VAL2
VAL2
VAL2
RBFA
1. Delegate places can only be confirmed once a purchase order
has been submitted to Schaeffler UK for the full course value.
2. Courses must meet a minimum number of delegates in order to
run. You will be informed no later than 2 weeks prior to a course
start date whether the minimum course number has been met.
3. All course cancellations must be made in writing no less than
2 weeks prior to a course start date.
4. There is no charge for a course transferred up to 21 days
prior to a course start date. All transfer requests must be made in
writing.
5. Off-site courses are available upon request with additional
expenses. Prices will be provided upon application.
RBL Rolling Bearing Lubrication£295 + VAT Per Person
VAL2VAL1 Vibration Analysis Level 1£550 + VAT Per Person
Vibration Analysis Level 2£650 + VAT Per Person
RBFA Rolling Bearing Failure Analysis£295 + VAT Per Person
Costs include all course materials, refreshments and a light
lunch. Discounts are available for larger groups.