RAW MATERIALS SPECIFICATIONS DESCRIPTION PACKAGING QTY. 02-10-00001 Acetyl salicylic acid pregran p.s as per attached list USP23,BP98 25-50 kg F.D or P.D 2 ton 02-10-00002 Acid ascorbic fine powder USP 23, BP 98 25-50 kg F.D or P.D 100 kg 02-10-00003 Acid benzoic USP 23 BP 98 25-50 KG F.D Or p.D 02-10-00004 Acid Citric monohydrate USP 23, BP 98 25-50 kg F.D or P.D 35 ton 02-10-00005 Acid Folic USP23,BP98 1 kg can. 300 kg 02-10-00006 Amiloride HCL USP 23 BP98 25kg F.D or P.D 20 ton 02-10-00007 Acid Salicylic USP23,BP98 25-50 kg F.D 6 ton 02-10-00008 Acid stearic proifiied 50 PPM butylated Hydroxy luene 25-50 kg F.D or 25kg multilayer papec bag lined with nylon on pallet 5000 kg 02-10-00009 to be added USP23 (NF18) , BP98 500 kg 02-10-00010 Acid trataric BP98 ,USP 23 (NF18) 25-50 kg F.D or 25kg multilayer papec bag lined with nylon on pallet 3 ton 02-10-00011 Amitriptyline HCL F.P BP98 5 kg can or 25 kg F.DorP.D 20 ton 02-10-00012 Aerosil 130 v USP23(NF18) 10-20 kg multi layer paper bags lined with nylon on pallet 50 ton Amoxyllin tryhydrate compact bulk density .68% sieve analysis 25 l galvanized I.D or 25 L. Alum. D. 15000 kg Alcohol Benzyl USP23 (NF18) BP98 02-10-00014 Amoxyllin tryhydrate v.f.p 100% below 125 micro 25-50 kg F.D or multilayer paper bags lined with nylon on pallet 50000 kg 02-10-00015 Atenolol BP98 25 kg F.D or P.D 02-10-00016 Alcohol phenyl ethyl USP23 25 kg galvanized I.D 02-10-00013
169
Embed
RAW MATERIALS SPECIFICATIONS DESCRIPTION · PDF fileDibasic USP23 25-50 kg F.D or multilayer paper ... ,USP23(NF18) 50 kg F.D or multilayer paper ... Assay : n.l.t. 99%
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
oily liq. May crystllize on storagePeroxide value (lea) max 10Acid value max 20UV absorption in isopropanola)mix absorption : at 325-327 mmb) ralative extinction :-at 300 nm max. 0.593
2 ton
-at 350 nm max. 0.537-at 370 nm max. 0.142Vitamin A content min. 1.OM I.U/g specify:1-dileumt oil2- antiaxidant 250 kg USP23,BP98
02-10-00541 IMPELLER SPACER 19…D…31…130102-10-00542 IMPELLER KEY 19DH…312…103202-10-00543 IMPELLER SHIM 19..D…31…155102-10-00544 STSTIC SEAL KK…73GV..02502-10-00545 "O" RING KK…71EP..07202-10-00546 "O" RING KK…71EM..00602-10-00547 "V" BAND COUPLING CT…28MM…38802-10-00548 "O" RING KK…71ER…37102-10-00549 "V" BAND COUPLING CT…28MM…20402-10-00550 "O" RING KK…71GX…19302-10-00551 "V" BAND COUPLING CT…28MM…27802-10-00552 "O" RING KK…71GX…26302-10-00553 "V" BAND COUPLING CT…28MM…20402-10-00554 "O" RING KK…71GX…19302-10-00555 SIGHT GLASS 17..Q…6…1222
02-10-00556 THRUST SENSOR ASSEMBLY
19DA…11…112
02-10-00557 FLANGE AND NOZZLE ASSEMBLY
19DG…212…112
02-10-00558 SPRAY HEADER ASSEMBLY
19DH…15…143
02-10-00559 REAR MOTOR BEARING 19DH…11…110402-10-00560 "O" RING KK…71GZ…02502-10-00561 NOSE PIECE 19..D…31…100202-10-00562 LOCKWASHER 19..D..31…218102-10-00563 LOKING PIN 19..D..31…219102-10-00564 SET SCREW 1/4INCH -
Aluminum over printing machine automatic printing machine on aluminum rool sheet width 300 mm and
variable speed up to5000 m/hr. to feed the ink automatic to the ink rool.
02-10-00609 *automatic ink drying unit sfter printing.
02-10-00610 *all part with contact to aluminum rool to be St.-St.
02-10-00611 *the stamping procedure to be done by metal chaigable rooll .*all accessories needed to put the machine in operating.*spare part for two years (list of spare part to mentioned ) .*single printing colour machine *double printing colour machine .coating pan electricaly heated complete trailitional St.-Steel 316 coating pan size 40" finished WT capacity 120 kg with inteval
bevels and all necessary accessories to put the machine in operation ,
02-10-00612 any recommended option allspare parts for two years (list to be attached)
Naenau factory 02-10-00613 WATER BATH.
SINGLE PLACE CIRCULAR,220 MM DIAMETER X 115MM DEEP WITHTWO HEAR RESISTING PLASTIC HANDLEN AND SET OFALUMINIUM RIGS.
ATTEST NO. 1262, 1262P.BIOLOGICAL INDICATOR FOR STEAM STERILIZATION MONITORING
02-10-00614 FREQUENCY RESISTANCE DATA FOR ATTEST FOR STEAM
STERILIZATION.121 C. MORE TIME 15 MIN.
02-10-00615 132 C. MORE TIME 3 MIN.
SOUDOGAZ T 206BUTANE - 190 G.
02-10-00616 Tree-cage animal unit for rabbits comprising aglavanizet iron rack with automatic feeder and
plastic drink king bottle fitted in the door
02-10-00617 Dimension of each cage .500 x 600 x 400 mm
02-10-00618 Gas burner , bunsen , for coal gas .
02-10-00619 Air partical counter consist direct readout of particle size pinter working range with respect partical for 0.5 and 5 mm
02-10-00620 High preasure liquid HP/C Acomplete and modular system of monitors , pump , controller and accessories
02-10-00621 Glass drying oven with forced air circulation for fresh and recircuted air drying temperature abt. 105 c drying
02-10-00622 time 20 to 30 minutes
02-10-00623 Laboratary glass ware washing machine automatic.with 3 rotating spray arms and 2 level washing chamber .
02-10-00624 Plastic welding appara tus foot- operated
02-10-00751 Ciculator Grundfoss up 25 –45 220 V – 50 Hz
02-10-00752 Thermal resistor gauge degussa PT 100 250 mm Special execution
02-10-00753 Contact thermometer Haenni 0 to 120 c0 L= 250 mm 3 meters
02-10-00754 Pressostate Aschcroft - 1 to 2.3 ba
02-10-00755 Micro switch Telemcanique XCK – J562
02-10-00756 Electro – magnet Bachofen GTCA 060X43 A01 24 V DC
02-10-00757 Manometer Haenni DRC 100/211.133 DN 100 Stainless steel G ½” 0-10 ba
02-10-00758 Recorder ELME S-16 with special paper and inked -Ribbon
02-10-00759 Door gasket LD 3961-82/08-11514
02-10-00760 Mechanical shaft seal Type : NO – AR : 96527 NO.CLIENT : 30023 401
SYM : 1158039900 uu50 REF : 876952 NO – NEC OU ART : 7913 243
NORMOPAC33+GRAIN 244 X 14- 47- 26-31- 13
02-10-00761 Garriagas & trys data ( per set ) capacity 380 containers of 500ml . Length 1350 mm.width 1000mm Height 1500 mm
02-10-00762 Charger complete 220/24 V
02-10-00763 Light emitting diode ( LED) for control panal
02-10-00764 Motor type F160 M.4 380V 50 HZ HKW RPM 1460 3PH SPARE PARTS FOR AIR COMPRESSORTYPE : ATLAS COPCO AG 808ESERIAL : ARP 823 38gSupplier : VIFOR Manufacturer:
( Filter element ) For high efficiency liquid and aerosol removal filter
02-10-00825 HEAKE FOUR POSITION MAGNATIC STIRRING PLAT FORMOPERATING SPEED,RANGE:0-1100 REV./MIN.,S.S. CASINGALLOW STIRRING OF NOT LESS THAN 4 SAMPLES.
02-10-00826 MAXIMUM THERMOMETER
IT RESEMBLE THE ORDINARY CLINICAL THERMOMETER BUTIT'S TEMP.IS MORE EXTENDED FITSTARTS FROM(70-150).
02-10-000827 HYDROMETER NAFLAC - PATTERNFOR DETERMINATION OF DISSOLVE SOLID IN BOILER ANDSIMILAR WATER ACCORDING TO THE NAFLOC METHOD WITHPOLISHED METOL BULB AND SCALE CALIBRATION 0.998 TO
1.01 IN 0.0002 SUBDIVISION MAXIMUM
02-10-00828 DIGITAL POLARIMETER
02-10-00829 MODER TYPE 360 ANGULAR SCALE SUBDIVIDED INCLUDED SODIUM LAMP 35W .
02-10-00830 VISCOMETER,INCLUDING STIRRING MOTOR AND PADDLE,
TURNTABLE CONTROL AND BOOST HEATERS.VARIABLE AUTO GRANSTORMER,ACCESSORIES.CONTACT THERMOMETER 10- 100 C.
COOLING COIL .COVER FOR TURNTABLE .STOP WATCH .
02-10-00831 DIGITAL TEMPERATURE-MONITOR FOR PYROGEN TEST/WITH
Complete project for IVPLANT using P.V.C Bags consist of : produce 4000 000 bag / year atone shaft
02-10-00868 High frequency bag welding machine to weld Lay-flat PVC sheath
and weld tube in the bags. The machine is doing automatically the following operations:- A-printing of the bags by hhot steaming processB-welding of the bags together with the filling tube diameter 6.3*7.9 mm with the possibility to weld 1,2 or 3 filling tubes at the time.
C-sealing of the filling tube(s) necessary for possible long term storage of the bags.D-speration of the bags by hot knnives:
*produce bags of volume ( 100,250,500,1000,2000,3000 Ml) *Capacity : 1200 bags/h*Electric supply : 380 volt. - 50 hertz
3 - phase+neutral +earth maximum power : 25 Kw-60 Amps.*compressed air consumption 30 NM3 /h at 7 bar working pressure controls with PLC over all dimention :
02-10-00869 Full automatic stopper washing machine to wash special macrolon stoppers T.N.C.A. with D.W. and filtered compressed air capacity : 2000 stopper/h
02-10-00870 Full automatic bags washing machine to washing machine to wash PVC bags size ( 100 ml to 3000 ml ) with filtered D.W and suuitable pressureto wash bags completely and suction it by foour stage capacity : 2000 bag/h
02-10-00871 fully automatic printing machine to print batch No. man date , Exp.date
on PVC bags capacity for each : not less than 2000 opeartion/h
02-10-00872 full automatic filling sealing machine for PVC bags size (100ml to 3000ml ) machine suitable both to automatic filling and to automatic stopper insertion affer the filling *the plugs are automatically fed and then automatically inserted by special station inside the filling pipe.
*the nozle can be suited for standard 6-8 mm pipe as well as for any
02-10-00916 suitable pressure gauge to indicate positive pressure inside the clean room
INKS 02-10-00917 for DEXTROSE SALINE
(Adult ) k 31
02-10-00918 for maniitol 20% k23
02-10-00919 for maniitol 10% k37
02-10-00920 for DEXTROSE 10% k 10
02-10-00921 for DEXTROSE 50% k 40
02-10-00922 for DEXTROSE SALINE (INFANT ) k 65
02-10-00923 for ringer k 50
02-10-00924 for normal saline k20 white ink pink
Solvents :kvsKVHKDTHANNER
BAGS SERARETING MACHINE TYPE : VIFOR SUPPLIER : VIFOR
02-10-00925 motor with gerbox complete
02-10-00926 sets of S.S Roll complete
02-10-00927 A COMPLETE I.V. SOLUTION PRODUCTION PLANT .PACKING : BOTTLE BAGS MADE FROM EITHER " POLYETHYLENE " OR POLYPROPYLENE " VOLUME : ( 5-50 -100-250-500-1000) ML .
CAPACITY : ( 16,000000) SIXTEEN MILLION BOTTLES OF 500 ML VOL. PER ANNUM .DESCRIPTION :1- MACHINERY : BLOW - FILL & SEAL MEDICAL AUTOMATIC MACHINES ( WITH COMPLETE AUXILLARY EQUIPMENT & MOULDS FOR EACH SIZE ) 2-COMPLETE SOLUTION PREPARATION UNIT
INTERCHANGE ABLE SOLID GLASS PLUG BOROSILI CATE GLASS WITH RUBBER CAP AS RETINING CLEVICE BORE DIA MM PLUG CONE NS
02-10-01284 2.5 14.502-10-01285 4 18.8
DITTO , WITH CAPILLARY SIDE ARMS
02-10-01286 2.5 14.5
DITTO , WITH INTERCHANGE ABLE DTFG PLUG WITH THREACL WITH RETAINING DEVICE
02-10-01287 2.5 14.502-10-01288 4 18.8
DITTO , WITH CAPILLARY SIDE ARMS
02-10-01289 2.5 14.5
02-10-01290 STOP COCK FOR BURETTE , STRAIGHT WITH INTERCHANGE ABLE GLASS PLUG BORE 1.5 MM OUTER DIA OF TUBE 9 MM , NS 12.5 PLUG WITH THREACL AND FLETIBLE O- RING RETAINING DEVICE , BOROSILICATE GLASS
CUITURE TUBES , WITH AIR - TIGHT PLASTIC SCREW - CAPS , STERILITABLE
HEAVY - WALLED BOROSILICATE GLASS OUT SIDE DIA MM LENGTH MM
UNKNOWN ITEM NO. SUITABLE FOR THIS M/C (REV. 100/90)
02-10-01391 CAVITY FOR BABY BOTTLES 250 ML SPARE PART for Air Separation plant Gox 100 Linde job No.1410 1751 Lind Code;Dabbash 1-Unit type ; E270 -13.5 - SEZ-SSDenomination ORDER-NO.
02-10-01392 SCREW Compressor with all ball
N17975
02-10-01393 bcaring as spare part
02-10-01394 Housing flange K31660;0002-10-01395 coupling K32349;0002-10-01396 Lock washer N1794602-10-01397 Electric motor type
only geared pump 10 bar 5-Low Temperature Reciprocation pump Type KP3L -36 V
02-10-01408 PISTON ROD 02-10-01409 CYLINDER02-10-01410 PISTON RING02-10-01411 EXPANDER RING 02-10-01412 GUIDE RING 02-10-01413 SEALING RING 02-10-01414 SUPPORTING RING 02-10-01415 CALMPING RING02-10-01416 PACKING RING
6-LOW Temperature Reciprocation pump type KP2L -22/65 V
ýProvided as standard .ýýThe polystyrene auto-shutter for use in full automatic ýýmode is provided as an optionýýTemperature : 15C0to 40 C 0 , Humidity below 70 % ý
analysis ýýand simultian eous determination of mono valent and divalent ýýcations in many matrices ) with its columns ýýConsist of :-ýý*Comprises pump ý
ý*Detector ( 10N chromatography)ýý � Sepration center and novel supperessor ( ion ýýchromatography sepration center- tow channels)ýý*sepration center and novel supperessor ( ýýIONchromatography sepration center – tow channels ) ýý*Auto sampeler for up 128 samplesý
ý*the evalution system allows easy and dependable ýýintegration and storage of chromatograms on apc basis ýýA) Accessoriesýý � Dialysis unit for ION chromatography analysis of ýýdifficult samplesý
ý � Electro chemical detector for ION ýýchromatogrophy and HPLCý
ý � 20 Different type of columnýý � recorder
02-10-01533 ý4) High Performance Liquid Chromatograph ( HPLC )ý
10
ý � LC Micro – volume ýýplunger solvent delivery ýýunit for semi – micro LC ýý � UV-Vis detector 190-600 ýýnm / 900 nmýý � System controllerýý � Refractiv index dectertorýý � Dual plunger solvent ýýdelivery unit for routine ýýuseýý � Photodiode array detector ýý190-800 nmýý � Auto – injectorý
ý - Reservoir ýýselection with ýýrinsing pumpýý � Electro chemical detectorýý � Work station systemýý � Auto sampler ýýB ) Accessories :-ý1- All its accessories and ýýcolumnsýý2- Recorder
ý B ) Accessories and spare partsýý1- Air copressor , oil freeýý2- Pure air fillterýý3- Minor spares Kitýý4- Calcium filterý
ý5- Barium filterýý6- Lithium filterý
ý7- Natural gas regulaterýý8- Water separaterý
ý9- Dust coverý 10- Cleaning solution
ýC ) Reogents – Industrial / standards :ý
ýK 1000 ppm ,Li 1000 ppm , Ba 3000 ppm , Na ýý1000 ppm , Ca 1000 ppmý
ý D ) Flame testingý
ý1- Blowpipe bent plated brass , ýýapproximately 200 mm longýý2- Charcol blocks : For blowpipe analysis . ýýApproximately 100 X 25 X 25 mmýý3- Glasses 75X50 mm , cobalt blue , for ýýdetection of patassium in the presence ýýof sodium etcýý4- Rods silica plain , 75 mm long X 1mm ýýdia meterýý5- Wire platinum length 38 mm ,dia meter ýý0.376 mm fused into glass handle with ýý75 mm long
02-10-01536 ý7 ) Potentiometric Titrator ý
6
ý Compact titralor for dynamic and monotonic titrations with
automatic equivalance point deter mination ýýas well as end point titration . and PK value deter minations with electrods , titration stand , magnatic ýýstirrer , printer , sample changer ý
ý B) Accessories :-ý All its Accessoriesý
02-10-01537 ý8 ) Karl – Fischer Titrator for water Determination : ( Volumetric )ý
6
ý1- Compact KF titrator for fast and accurate water determinations .Titration stop either by means ýýof deloy time or by drift criterion . soft ware – controlled polarizer for bi voltametry
and bi – ýýamperometry Backlit LCD screen .ýý2- Titration stand with stirrer and pump , compact titration stand with magnatic stirrer and pump ýýfor addition of solrvents and for siphoning of titration vessel contentýý3- Printerýý4- KF Drying oven
ý B ) Accessories :- ýý All its Accessories
02-10-01538 ý9)PH- Meter . or PH/Ion –Meterý
20
ýA ) Specificationsý
ýRangeý ý-1.999 to + 19.999 PH ýý-1999.9m V to +1999.9 mvý
ý0.001to 199999 ppmýý- 9.9 to 120C
ýResolution ý ý0.01 PH and 0.001 PH ýý0.1 Mvýý0.01 /0.01 and 0.1 ppmýý0.1 C
platinum resitance . user correction ýýup to -+ 2.0 c0
ý9- Electrical supply
ýý110- 230 V,50 – 60 HZ , 6 w max
ýB – Accessories ýýAll its Accessories
02-10-01541 ý12- Melting Point apparatus with CCTV Cmer a kit ý
6
ý 1- Temprature range c0
ýýNot less than 400 c
ý 2- Resolution c ýý0.1ý3- Measuring accuracy
ýýUp to 100c +- 0.3 cýýUp to 250c +- 0.5cýýUp to 400c +- 0.8c
ý5- Heating times 50c to 350 c
ýý+- min approx
ý6-Cooling time 350 c to 50c
ýý10 min approx
ý7- Data out put ýýRs 232 cý8- power supply ýý220 v , 50-60Hz
, 200 W
02-10-01542 ý13-Muffle Furnaces ý
10
ý Max temp. c ýý1600 c
ý Volume liters ýý15 Lý Electrical supply
ýý415 v ,50 – 60 Hz 3 phase
02-10-01543 14- Oven ý 15ýRange ýý50-500 CýCapicity ýý30 literýFeatures s.s interior and electronic control
ýý
ýLarge area grid shelver , control by direct reading thermostate ,the outer shells steal and the ýýinner is Aluminium
ýý
02-10-01544 ý15- Portable Digital Thermometer ý
10
ýA) Specificationý Range - 50 c to + 150 c water resistant propeý Display control with battry , with colloidal quaphite pack
02-10-01545 ý16- Thermometer mercury in glassý
10
ý Range 10- 100 c , 10-200 c , 10-300c ,10-400cý
of each
02-10-01546 ý17 – Maximum Thermometerý
30
ý* 1T resemble the ordinary clinical ther mometer but its temp . is more extended fitstarts frome ( 70 – 150 ) cý* 1T resist high temp . and breaking during sterilization and shaking
during entering the auto claveý* The maximum temp . that is reach remain stable with out shaking
ý* The numbers marked on the ther mometer must be stable to the high temp
ý* The level of mercury must be continous with out any cutting
02-10-01547 ý18 ) Hydro meter Nafloc – Patterný
10
ý For deter mination of dissolved solid in boiler and similar water
according to the nafloc method with ýýpolished metal bulb and scale calibration 0.998 to 1.01 in 0.0002 . subdivison maximum
diameter 41 mm , ýýlength 280 mmý
02-10-01548 ý19 ) Maximum and Minimum thermometer ý
10
ýWall mounting mercury in – glass ther mometer , with two markers , mounted on adual scale – 30 to 150 ýýC x 1 C and 20 to 120 X 2 Fý
ý Designed for horizantal mounting and reset by swivelling the frame to the vertical position . overall length ýý235 mm , in plasti frame with instructioný
02-10-01549 20 ) Membrance ý 1000ý * Special type for microbiologicalý * Pore size 0.45 mý * Cellulose nitrate with black ground
02-10-01550 ý21 ) Polarimeter : ( Automatic precision polarmeter with ýýoptical null principle by rotatio
ý* format of results ýý* format of results : selectable from instrument key ýýpad , any ular rotation , specific rotation , molar ýýrotation international sugar scale , as well as user – ýýdefined factor and offset
ý* Printer out put ýý* Printer out put : standard parallel printer port ( ýýcentronics port)
ý* data input ýý* data input : inpuit port for intermec 9720 barcode ýýreader and /or standard PC/AT kepboard
ý* communications ýý* communications : RS-232C serial ýýinterface , selectable bau
. d rate and communecation ýýparameters range, out put voltage 0 to 10mv , 100 ýýmv and /v
ýAralog output : ýý � Aralog output : digital –to – analog converion ýýof angular rotation for the connection of ýýchartrecordsrecording rangesýý+-50 , +-5 ,+-0.05 , resolution 0.1 % of range ý
ýwideh, cyelic repeatability in all ranges +ýý50, + 5 , + 0.05
ý , resolution 0.1 % of range width , ýýcycl ic repeataability in all ý
ý* External “Ready”: ý
ýRelay contact closure ( normally open) ,signal floating ýýmaximim load 110v ,0.3 A A C, actvated by print ýýsignal ,selectable delay and duration
ý* External autozero :
ýýExternal activation of autozero function , TTL siignal ýý, low acttive
,or contact closure , duration 100 ms ýýminiumum
ý* temp sensor : ýýPT- 100 temp. sensor for sample cells , temp .range ýý– 23C to + 198C
ý*Power supply : ýý90 to 132 VAC or 190 to 264VAC , 50+-0.5 Hz or ýý60+-0.5Hz ,200 VA
ýB) Accessionsý 1) recorderý 2) printer
02-10-01551 ý22- Coulter Counter ( Partical analysis system )ý
6
ý* Direct read out of paricle size
ýý
ý* Total count of large partical with repact of size given
ýý
ý* Printer woeking range with respect partical for 2 – 25
ýý
ý* Thrie shdel : ýý0- 99.9 0 division
ý*Timer range ýý10ms –655sec
02-10-01552 ý 23) Viscometerý 5
ý � Stirring motor and paddleýý � Turntable controlýý � Boost heatersýývariable autogransformerýB) Accessoriesý � contoct thermometerý
integrated impact bead and jackt ýýtip pt/ ir capilary
ý* champer ýýPoly propyleneý* Burner ýýFixed back /
forward postion and burner ýýhight ( simply switching of Air/ C2H2 and ýýN2O /C2H2 burner)ýýTitanium 10 Cm slot barner ( optional high ýýtemp . burner )ý
ý* Gas control ýýManual setting of flow rateýýAutomatic Air/ N2O switching system
ý* safty : ýýgas pressure monitoring to prevent ýýflashbackýýAutomatic flame monitoringýýSafty inter lock for misuse of burner ýýAutomatic flame extinguish when power ýýfailure
ý* lgnition : ýý Push ignition button
ý* soft ware : soft ware based on MS- Windows TM
ýý
ý* power supply : ýýAc 220 v,230v,50/60Hz, 300Va
ý* Ambient temp . and humidity range
ýýTemp. 10~35 C 0Humidity 45 ~80% (less ýýthan 70% when tem
p. is greator then 30C )
ý*Standard accessories ý
ýBurner Head of 10 cm slot Nebulizer ýýassembly. Deuterium Lamp drain tube ýý.teflon tube for sample suction .Hose ýýassembly for C2H2 ,hose band ,
RS-232C ýýconnection ýýAssemply for air . hose assemply ýýTO C2 H2 , HOSE BAND ,ýýRS – 232 connection .ýý cable ( 9P-9P) Ac cable for 220,230vý
ýB) Other Accessoriesýý � auto samplerýý � recorder .ýý � Hydride vapor Generatorýý � Mercury vaporizer unitýý � High temp Burner headýý � All perdic HCL with its st solutionýý � Drain separator ýý � Compressed gas Regulator for C2H2ý
ý � Compressed gas regulator for N2Oý
02-10-01558 Ambulance with the following specification :- *Truck according to years 2001-2002 specification models with petrol engine water - cooled
*Emergency waening system supplied ( siren with speaker and beacon). * Air conditioning (cooling and heating).
* Gearbox (5) speed manual. * Details of standard medical equipment:- 1. Oxygen bottles 500 litter capacity within the left wall cabinetry.
2. Spare oxygen bottles 500 litter capacity in storage cabin. 3. Plastic Nasal canulas – adult. 4. Oxygen catheters , two of each no. 10F 5. Mouth – to – mouth ventilation mask, sussex, air way (with long & short air way ). 6. Port able oxygen kit complete with regulator and supplies.
* Four 10 cm elastic strips.* Six gauze bandeaus, three of 75mm and three of 150mm. * Twenty gauze pads 10cm by 10cm, individually wrapped.* Two 5cm anti-allergic rolls of adhesive tape. * Fifteen tongue depressors individually wrapped. * One 100 ml bottle containing chlorexidine base disinfectant. 8. York II stretcher trolley complete with mattress, cover, locking device & quick release patient restraints.
9. Wheel stretcher with adjustable back aand foot rests with side handles,
complete with mattress and cover.
10. Oxygen masks, one for each adult child and infant.* Necded optional medical equipment.* All needed catalogues in English.
* Spare parts for 3 years.* Aside door : side door at right side.
* Back doors: two panel doors open able to the sides.
02-10-01559 Plastic Bottle: 3 unit Fully automatic injection -stretch -blow moulding machine for production of (PET) bottles with the
following capacity:-
Volume of the bottle: 1-125 Ml 2-150 Ml 3-300 Ml 4-1000 Mlcapacity : 1-25 Million / years
2-10 Million /years
3-3 Million/years 4-2 Million /years *All needed optional and aaccessories equipment
to put the machine on production.*The voltage for the machine must be
*spare parts for 2 years *Aletter of guarantee for a period of 12 months.
*Break down prices for (supplied machine , errection
and commissioning ,maintenance,installation, induestrial
services inside the rooms (cables,chilled water pipes,compressed air pipe…Etc.)and training for technical of medical staff.*All needed catalogues and operating manuals in
English must be sent with the offers.
*All needed information ,specification for the said machine and equipment.*Raw materials for production for six monthes
02-10-01560 Set of 10 cavittes injection and blowing moldes for
2 sets
production of prefforms and bottles with the following specification :- a-Injection mould . b-conditioning group.
c-Stretching group. d-Blowing mould.
spare parts for 2 years
02-10-01561 set of mould suitable to produce bottles
2 set
size 300 ml and 1000 ml for production of preforms and
bottles with the following specification and capacites:-A- injection mould.
02-10-01563 Line for high pressure air 40 BAR -480Nmc/h
1 line
with the following :-
A)oil free compresser: *Inlet air pressure atmospheric *Max delivers pressure 40 bar *Flow rateat 40 bar 480 Nmc/hr *Installed power 120 Kw.B)water cooler with circulating unit
C)final cooler for compressed air.D)2000 litters air tank with safety valve E)compressed air dryerF)final fillter
02-10-01564 Mould /conditioning temperature
3
regulator with the fiollowing specification:*Range of use 40-120 C*heating power 6 Kw*cooling power 14.000 Kcol/hr.to be feeded with chilled water
02-10-01565 Mould AREA air conditiones, chemical adsorption device ,
3
Fiber glass rotor with silicagel :-* proscess air flow rate 270 mc/hr* cooling powers 3800 frig/hr* Installed power 3.1 kw .
* to be feeded with chilled water .
02-10-01566 Closed loop water chiller .
1 unit
*condensation without water consumption*Reciprocation pistons and orbiting spiral compressor.
*thermally insulated tank included .
*complete with electric board and control in struments.* Refrigerant cycle gas (any kind exepl- R22 )*nominal refrigerant power 130,000 - 135.000 frig/hr
*outlet water temperature 12C’
installed power 58 kw .complete qualty control Eqmipment and all auxiliarys equipment .complete warkshope
N.B/ 1-5000 Capsules sample of each size is required for evaluation2- For exact color & printing sample will be sent to the buyer upon it’s request .
3-Capsules to be protected by paper / polyethlene bags packed in a strong double corrugated carton .inner sides lined with trays of styropore foam , outer sudes wall laminated with wax lamination .4-Shipment and transportation should be effected in refrigerated trucks ,to insure safe arrival and quality .
Oral Drops02-10-01570 1-Glass bottle
droppers ,15 ml round amber bakelite
15.000.000
18 mm, (drawing no .SDI-18) Art no 73413 .
02-10-01571 2-Internal plastic droppers art .no B 1810-1
15.000.000
02-10-01572 3-White Bakelite cap (Art no . Li810)
15.000.000
Specifications:GlGlass bottles to be from glass type III
GlGlass bottles should meet the limit test of alkalinity (Analytical certificate is required).3-Transmission of light & chemical resistance of amber glass bottles & specifications to be according to USPXXI.4-Bottles :Finish 17.4 mm, capacity 15 ml ,weight 31-35 gm body diameter 27.8(+0.5, - 0.5 )mm
5-Bottles to be arranged as 195(13x15)pcs/pack ,6 packs/layer 18 ,layers / palette ,(21060 pcs /pal)packs with finish upside down .
6-Palette :dimensions 1200/800 , height 1400 mm weight 690 kg.
7- Covering : 10 pcs pads in between each 2 layers
1195x795( dimensions 9 pcs trays with 1195x795x100 mm in dimensions arranged on the bottom, then on
the 3,5,7,9,11,13,15,18, layer .Totally covered by double plastic foil 2120/1900/0.25
Shrink wrapped & stripped, labels with all in formationsTo be stacked on outer sides.Plastic dropper & Bakelite cap:Each kind to be packed in a well closed nylon sac of 1000 pcs & each 2 saces packed in a strong worthy export corrugated card board carton in non return shrink warp palette,with large outer labels on cartons& palettes with all in formations & quantities inside .
02-10-01573 Glass Bottle Dropper 10.000.000
Glass bottle droppers 15 ml , round ,amber finish 18 mm(drawing no . 7B809)
Specifications:1-Glass bottles to be from glass type III2-Glass bottles should meet the limit test of alkalinity (Analytical certificate is required).3-Transmission of light & chemical resistance of amber
glass bottles & specifications to be according to USPXXI.
4- Bottles :Finish 19.4 mm, capacity 15 ml ,weight 19-21 gm
body diameter 26-27 mm height 56.7 – 57.7mm .5-Bottles to be arranged as 221 pcs/pack (13x17) , 6 packs /layer ,19layers/palette (25194 pcs/pal)packs
with the finish upside down .6-Palette: dimensions 1200/800 , height 1320 mm weight 550 kg.7- Covering : 10 pcs pads in between each 2 layers with
dimensions 1195x795 mm 10 pcs trays with 1195x100 mm dimensions arranged
in the bottom, then on the 3,5,7,9,11,13,15,17,19 layer .Totally covered by double plastic foil 2120/1900/0.25
Shrink warped & stripped , labels contains all the In formations To be stacked on outer sides.
02-10-01574 Un graduated glass dropper , composed of glass tube ,
25.000.000 unit
Black butyl rubber leucolene teat, black Bakelite cap.18mm & must be assembled
1-Glass dropper to be from glass type III2-Glass droppers to fit with glass bottle dropper 15 ml
finish 18 mm ( drawing no. SDI-19 – improved ) .3- Enclosed samples of glass droppers to be supplied
accordingly .4-To be packed in a well closed nylon sac of 1000 pcs &
each 2 saces packed in a strong worthy export corrugated card board carton in non return shrink warp palette , with
large outer labels on cartons & palettes Contained all in formations with quantities inside .
Specification :1-Glass bottles to be from glass type III2-Transmission of light & chemical resistance of amber
glass bottles &all other specifications to be according to
USPXXI.
3-Bottles : Finish 17.05 mm, capacity 12ml ,weight, 23-25 gm ,body dimensions 24.5-25.5 mm height:
60.5-61.5 mm4-Bottles to be arranged as 255 pcs/pack (15x17) , 6 packs /layer ,18 layers/palette (27540 pcs /pal) packs with the finish upside down .5-Palette: dimensions 1200/800 , height 1360 mm weight 700 kg
6- Covering : 10 pcs pads in between each 2 layers with
dimensions 1195x795 mm, 9 trays with 1195x795x130
mm dimensions covering outer sides of the palette .
Totally covered by double foil 2200/1900/0.25 Shrink warped & stripped ,labels contains all the in formations To be Stacked on the outer sides.
02-10-01576 Un graduated glass dropper for 12 ml glass bottle dropper , composed of
10.000.000
Un graduated white bent glass Enclosed samples of 100 sampled glass bottle with
Droppers is required . Samples of 200 sampled glass droppers is required
For evaluation . To be packed in a well closed nylon sac of 1000 pcs & each 2 saces packed in a strong worthy export
corrugated card board carton in non return shrink
warp palette , with large in non return shrink warp Palette , with large outer labels on cartons & palettes Contained all in formations with quantities inside.
02-10-01577 ALUMINIUN\M TUBES 10.000.000 tubeA-Aluminum tubes 13.5x70 mm cylindrical printed in Two colors internally lacquered with plastic
Ophthalmic nozzle pick & membrane orifice with ring
For (Pfizer type)Specifications:1-The tubes must contains gasket ring made of latex 7 mm wide & should be fixed in side the tube approx
2mm (+1,-1 mm) from the tube end & should have
a constant thickness of 0.02 – 0.025 mm
2-The specification of Alum .tube & internal lacquer to be
according to British standard ,analytical certificate is required .3-Tubes to be packed by I,W,K,A Cartooning machines
type carton KKI.
4-Tubes to be packed in corrugated cartons without
divisions of 250 pcs/each & repacked in wooden cases
with outer side printed with all in formations & quantity in side, Inner sides carton dimensions : (length 293 x width 148 x height105mm)5-In addition assembled thin carton divisions is needed & to be used inside the above cartons for packing 200 tubes of the finished product , the division are with the following dimensions: a- Partition with 15 slots size 290 x 65 mm
b- Partition with 9 slots size 140 x 65 mm .Each 19 partitions of size (140 x 65 mm) & 9 PartitionsOf size (290 x 65mm) to be assembled together in one division ( set) .
6- Packing:- Each 100 sets (assembled divisions) to be packed in a worthy export strong corrugated carton &
Palletized , large in formation lable on the carton outer Side is needed .
02-10-01578 B-Aluminum tubes 19x100 mm cylindrical printed in
30.000.000 tube
Two colors internally lacquered for skin oint. & creams (medical) use with orifice membrane & white caps with punctured thorn .Specifications& packing :1-The tubes must contains gasket ring made of latex 7 mm wide & should be fixed in side the tube approx
2mm (+1,-1 mm) from the tube end & should have a constant thickness of 0.02 – 0.025 mm
2-The specification of Alum .tube & internal lacquer to be
according to British standard ,analytical certificate is required .3-Tubes to be packed by I,W,K,A Cartooning machines type carton KKI.
4-Tubes to be packed in corrugated cartons approx. dimensions :
(length 315 x width 250 x height125mm)
using divisions in between alum.tubes for separation & repacked in wooden cases ,All necessary in formations & quantity to be printed on cartons & the box in oute sides .
02-10-01579 C- Aluminum tubes 22x115 mm cylindrical printed in Two Color
25.000.000 tube
Internally lacquered for skin Oint . & creams (medical use) with orifice membrane & white cap with punctured thornSpecifications & packing :1-The tubes must contains gasket ring made of latex
7 mm wide & should be fixed in side the tube approx
2mm (+1,-1 mm) from the tube end & should have a constant thickness of 0.02 – 0.025 mm2-The specification of Alum .tube & internal lacquer to be according
to British standard ,analytical certificate is required .
3-Tubes to be packed by I,W,K,A Cartooning machines type carton KKI.
4-Tubes to be packed in corrugated cartons approx. dimensions :
(length 315 x width 260 x height125mm)
using divisions in between alum.tubes for separation & repacked in wooden cases ,All necessary in formations
& quantity to be printed on cartons & the box in outer sides .
Specifications: 1-Glass bottles to be from glass type III .2-Glass bottles should meet the limit test of alkalinity
(Analytical certificate is required).3-Transmission of light of amber glass bottles should be
according to USPXXI. Bottle Packing : to be arranged as 63 pcs/pack(7x9) 6 packs/layer. 9 layers /pal (3402 pcs/pal), packs with
the finish up side down in separately shrink wrapped quantities . Palette size 1200/800 mm , height : 1330 mm Weight : 375/ 410 kg . 5-Covering One pad on bottom with 1195x795x795 mm dimensions , 9 trays on all layers covering outer sides
of the palette with 1195x795x100 mm dimensions . Totally covered by double plastic 2400/1900/0.25 Shrink warped & stripped , labels contains all the in
Formations To be stacked on the outer sides.Glass bottles 125 ml , finish marked to 100 C.C 28 mm , round , amber.
20.000.000
Specifications: 1-Glass bottles to be from glass type III round amber .
2-Glass bottles should meet the limit test of alkalinity (Analytical certificate is required).3-Transmission of light & chemical resistance of amber glass. glass bottles should be according to USPXXI.
4-Glass bottles to be packed with finish up side down in a separately shrink warped quantities, arranged in Layers separated totally by pads & trays covered in Between layers & the outer sides on totally nylon Shrink wrapped palette5- Glass bottle to be marked to 100 c.c for suspension .
6- labels contains all above information to be stacked on
VIALS Glass bottles, 10ml vials , white , round finish 20mm ,used for packing Antibiotic powders.
Specifications & Packing :-
02-10-01581 A-Glass bottles to be packed in corrugated trays of 240pcs
20.000.000 vials
& arranged in layers totally covered with the outer palette .sides by corrugated trays on a totally double layer polyethylene of 0.4 mm thickness shrink wrapped palette . - Large outer labels printed with all above in formation to be stacked on palette .
75.000.000 P c s .
02-10-01582 B-Glass bottles(vials) are used for packing antibiotic Powders made from glass type III which should meet the Limit test of alkalinity & chemical resistance of glasses
According to USPXXI( analytical certificates is required) - Samples of 200 G.B is required for evaluation .Aluminum Sealing
02-10-01583 A-Aluminum Cap pilfer proof ,28 mm , whit color printed
20.000.000 Pcs
In One color according to DIN 60945 (28x18mm)Specifications:Thickness of alum .cap to be 0.23 mmThe points between caps & it’s ends must be proper to open the cap easily after closing
according to the standard torque force for each .3-The pad to be 2.4 mm thickness & well fitted to the caps
To ensure no separation .
02-10-01584 B-Aluminum caps for antibiotic vials ,high 8 mm
20.000.000 Pcs
,thickness 0.22 mm(-0.2 , +0.2 mm) diameter 20 mm
(Group 13 DIN 266-BM2-13) - Samples of 5000 pcs is required for evaluation
Self Adhesive labels
02-10-01585 1- Pharmaceutical labels printed in two colors 70gm of self
30.000.000 Pcs
adhesive roll size 40 x 80 mm to be used on nor print machine . the distance between each 2 successive labels is 2.5mm Each roll contains 9000-10000 labels . Foil direction (foil winding ) is anti –wise direction . Roll core diameter is 70-75 mm One roll sample is need .
02-10-01586 2- Pharmaceutical labels printed in two colors on self
75.000.000 Pcs
adhesive paper roll size 22 x 52 mm to be used in C.E.
King machine model collimate 70.
the distance between each 2 successive labels is 2.5mm Each roll contains 9000- 9500 labels . Labels to be suitable for sticking on siliconized outer Surface treated glass bottles . One roll sample for evaluation is need .
Label reel to be used for self
adhesive Automatic labeling m/cs ‘ Neri machines ‘ the distance between each 2 successive labels is 3mm label dimensions = 80 mm long x 40mm height reel max .diameter = 250-300mm reel core diameter = 70-75 mm
fail un winding to be clock wise direction .
labels to be from out side of the foil reel and in the position.
- One roll sample is need
Special inks to print over p.v.c
bags (According to 1.C.I, Bermann cod No.)
02-10-01587 Red K20 100 liter02-10-01588 Green K40 100 liter02-10-01589 Blue K31 100 liter02-10-01590 Black K65 50 liter02-10-01591 Yellow K10 25 liter02-10-01592 Terriquaze
02-10-01614 A- WIDTH 230 MM 500.000meter02-10-01615 B- WIDTH 198 MM 1 250.000meter02-10-01616 C- WIDTH 135 MM 100.000meter02-10-01617 D- WIDTH 150 MM 100.000meter02-10-01618 E- WIDTH 189 MM 2 000.000meter02-10-01619 F- WIDTH 205 MM 2.500.000meter02-10-01620 g- WIDTH 157 MM 2 500.000METER02-10-01621 H- WIDTH 165 MM 2.500.000METER02-10-01622 I- WIDTH 221 MM 1.250.000METER
02-10-01623 J- WIDTH 130 MM 3.000.000METERN.B./ IT IS NECESSARY TO INDICATE :SPECIFICATION OF THE ALUM FOIL (PLAIN).
KIND AND QUANTITIES (WT/M2) AND CONSTITUENT OF THE LACQURED METRIAL USED WITH ALL TECHNICAL DATA INCLUDING THE RECOMMENDED SEALING TEMPAND THE
STORAGE CONDITIONS AND SHELF LIFE .
3- APPROVAL FOR ITS USED IN THE PHARMACEUTICAL PRODUCT’S.4-ONE ROLL SAMPLE IS REQUIRED FOR EVALUATION .5- EACH ROLL TO BE WARPPED WITH SACK POLYETHYLENE ANDTO BE PACKED IN ASTRONG WOODEN CASES WITH WOODEN BAR INSIDE OF EACH 2 ABOVE REEL .
P.V.C. RI RIGID P.V.C SHEETS PLAIN TRANSPERANT , COLOURLESS THER-/MOFORMABLE FOR BLISTER OF PHARMACEUTICAL PRODUCTS LAMINATED WITH PVDC 40 gm/m2 SUITABLE
FOR SEALING AGAINST LACQUERED ALUM .FOIL, THICKNESS 250 MICRON , CORE DIAMETER 70-75 MM :
02-10-01624 A- WIDTH 240 MM 500000 METER
02-10-01625 B-WIDTH 208 MM 600000 METER 2-RIGID P.V.C SHEETS, PLAIN , TRANSPERANT COLOURLESS THERMOFORMABLE FOR BLISTER OF PHARMACEUTICAL PRODUCTS (CAPSULES ,TAB & COATED TAB) SUITABLE FOR SEALING AGAINT
LACQUERED ALUMINIUM FOIL, CORE DIAMETER 75-76 MM ,
MAX OUTER DIAMETER 400 MM ,250 MICRON THICKNESS :-
02-10-01626 WIDTH 207 MM 2500000 meter
02-10-01627 WIDTH 191 MM 2000000 meter
02-10-01628 WIDTH 159 MM 2000 000meter
02-10-01629 WIDTH 167 MM 2500000 meter
02-10-01630 WIDTH 223 MM 2500000 meter
02-10-01631 WIDTH 159 MM ORANGE COLOUER.
25 000 meter
02-10-01632 WIDTH 159 MM Whit opic
25 000 meter
02-10-01633 WIDTH 251MM 400 Miron thichness
150 000 meter
02-10-01634 3- RIGID P.V.C sheets plain , white colour
500000 meter
thicknes 0.4 mm ,width 130 mm core diameter 70 mm max . out side reel diameter 400 mm
( container for vials ) N.B/ ONE SAMPLE ROLL IS NEEDED FOR EVALUATION .PACKING/ REEL TO BE WRAPPED WITH BLACK
POLYETHYLENE &TO BE PACKED IN ASTRONG WOODEN CASES OF 8 REEL WITH A WOODEN BAR INSIDE THE CORES OF EACH 2 ABOVE REEL .
( GLASS TUBES SPECIFICATENS )
1- Glass tube ( class ) in compliance with ( DIN ) speceficatien NO. 58377 to produce a medical class Ampouies .
2-This Tube is closed fram both sides but there is a small opening a side ( clia .1.8mm ) at the upper for air exit the tube length is apprx . 1500 mm .
3-Each 300 tubes paclked togathes in a tigtly covesd with P.E. Thicknek 0.1 mm 4-Each 54 packages paeked togathes ( capacity 300 tubes in pallett its base consins of ( 6) packages height of ( 9) packages and put on awoodem base this pallet is covered with (p.e.) firstly thickness
( 0.2mm ) then covered with hard cartoon ( beublu carrugated ) then to be cavered with athick p.e. ( thichnes 0.2 mm ) ( 6) packages height of ( 9) packages and put on awoodem base this pallet is covered with (p.e.) firstly thickness
( 0.2mm ) then covered with hard cartoon ( beublu carrugated ) then to be cavered with athick p.e. ( thichnes 0.2 mm ) 5-To put a thick castoon ( double cossugated ) hougentaly between the packages of pailet for sakty avoied bsakage / bseakage .
Des. Colour Length fused ends mm Outerdin mm Wall –Thick ness mm
02-10-01635 Class Tube Class ( 1 ) Amber 1500 10.75 -+ 0.13 0.50 -+ 0.02
114000
02-10-01636 Class Tube Class ( 1 ) Trans parent colour less)) 1500 10.75 -+ 0.13 0.50 -+ 0.02
114000
02-10-01637 Class Tube Class ( 1 ) Amber 1500 12.75 -+ 0.13 0.50 -+ 0.02
38000
02-10-01638 Class Tube Class ( 1 ) Trans parent colour less)) 1500 12.75 -+ 0.13 0.50 -+ 0.02
38000
02-10-01639 Class Tube Class ( 1 ) Amber 1500 17.75 -+ 0.15 0.60 -+ 0.03
16000
02-10-01640 Class Tube Class ( 1 ) Trans parent colour less)) 1500 17.75 -+ 0.15 0.60 -+ 0.03
16000
premould P.V.C sheets printed in one colour for suppositories .
02-10-01641 A. printed 2 gm supp.
500 000 meter
(Trade Name ) on each supp.( composition ) between two supp.printed colour : panton
02-10-01642 B. printed 1 gm supp.
500 000 meter
(Trade Name ) on each supp.( composition ) between two supp.printed colour : panton
P.V.C PREMOULD SHEET FOR SUPPOSITORY 1 GM
Specification :-1. P.v.c fda grade
2. I.R test to be pass.3. Width of promould sheet 42.7 mm 4. Outer real diameter mao 50 cm .
5. White opaque colour .6. Each meter should contains 56-57 covities N.B: Suppository filling M/C Dott. Bonapace and co. Milano/ITALY CONDITIONS :-1. Analytical certificate from the suppliers must be submitted and saniticated by high authorities .2. Marks . Manuf. , Batch No. to be mentioned .Storage condition :-
Temp. N.M.T. 45 C Humidity N.M.T. 65 R.H
P.V.C PREMOULD SHEET FOR SUPPOSITORY 2 GM
Specification :-1. P.v.c fda grade
2. I.R test to be pass.3. Width of promould sheet 52.0 mm 4. Outer real diameter mao 50 cm .
5. White opaque colour .6. Each meter should contains 56-57 covities N.B: Suppository filling M/C Dott. Bonapace and co. Milano/ITALY CONDITIONS :-
1. Analytical certificate from the suppliers must be submitted andSIGNEDby high authorities .2. Marks . Manuf. , Batch No. to be mentioned .Storage condition :-
Temp. N.M.T. 45 C Humidity N.M.T. 65 R.H
02-10-01643 Foil for oral rehydration solt
1 000 000 meter
printed foil used for pharmaceutical preperations of oral rehydration salt made of paper 40g/Aluminium 9 micron (24g)polyethylene 40 g/m2 - widith 322 mm - core diameter 76mm - max . Outer diameter 250 mm
GLASS BOTTLES Glass bottles 8.5 ml round amber ( drawing no. SDI 1) suitable for tablet packing with corrosponding plastic typepilfer proof ( cap to cap ) O 24 MM
02-10-01644 1. Pilferproof ( cap to cap ) O 24 mm
500 000
02-10-01645 2. Glass bottles 0.5 ml
500 000
Specifications :-
1. Glass type III round ambe .2. Should meet the limit test of alkalinity ( analytical certifcate is required ) .3. Light transmission of amber glass bottls should be according to USPXXI
Packaging :- Each about 200 G.B. shrinked with nylon and these arranged into pallet of dimension about
120 x80 x80 cm which is also shrinked nylon .
GLASS BOTTLES
02-10-01646 1. Glass bottles 150 ml , finish 40 mm , round , amber ( drawing NO.SDI -8 )
3 500 000
02-10-01647 2. Glass bottles 60 ml , finish 18 mm , round , WHITE ( drawing NO.14 )
250 000
Specifications :-1. Glass BOTTLES TO BE FROM glass type III 2. Should meet the limit test of alkalinity ( analytical certifcate is required ) .3. Light transmission of amber glass bottls should be according to USPXXI including the chemical resistance
of amber glass bottls .4-All dimensions per each to be according to the attached refered drawing .
5- specification of P.V.C attach .Packaging :- 1. Glass bottles to be packed with finish up side down in aseperatly shrink wrapped quantities ,
arranged in layers soperated totally by pads & trays covered in between layers & the quter sides on totally nylon shrink wrapped pallette . 2. Lables contanins all above information to be sticked on .
GIUE02-10-01648 strunck - Col - S 3000 kg
02-10-01649 strunck - Col - N 20 000 kg
FIEXOGRAPHIC ( thermai resistant
ink ) 02-10-01650 Blue colour 25 liter02-10-01651 Black colour 25 liter02-10-01652 Red colour 25 liter02-10-01653 Solvent for the
felexographic ink 300 liter
Ampoules lables ( Automatic labelling maching ) HAPA 411 ( Heat seal paper )
02-10-01654 Quality : Thermo - Sensitive PBL3
300 000 meter
55 Nr. Kromekote Weight : paper 78 g / m2 Emulsion 18 g/m2 + - 0.5 g Totally : 96 g/m2
Size : Narrow roll width 32 + - 0.2 mm core diameter 76 mm outer diameter max. 380 mm length of roll max. 1000 m Splices spots : max l per roll please mention specification of your splices material & guarantee packing .
02-10-01655 low Density polyethylen
24.5TON
Grades :- BASF / 2425K ALCODTA/ 063 CODTI / 4050 DOW CHEMICALS / 5585 Epurpose: for injection molding of cap,screw caps and flat discof baby feeding bottles.
02-10-01656 medium viscosity improved mold release grade to be
55.5TON
manfuctured in compliance with food additive regulations
goverening poly carbonate resins for food contact applications=21CFR,177,1580and 21 CFR 010,2010purpose: to produce baby bottles
02-10-01657 liquid silicone rubber
13TON
Grades :- SILASTIO 595 HC A+Bpurpose: to produce teats of baby feeding bottles
ALUMINUM CAN 19ml. Aluminum can suitable for Inhalation product .
02-10-01658 Wall thickness - 0.41 + - 0.05mm
2 000 000
Height - 58.80-59.31 mmDiameter - 22.10 - 22.20 mmNeck bead diameter - 19.86 -20.06 mm Neck ID - 16.57 - 16.76 MM Aluminum grade - 5052
20 mm crimp on 2 000 000Stem diameter - 3.16 mm All component used should be approved pharmaceutical grade
02-10-01660 ACTUATOR 2 000 000Polypropylene made ,Glaxo, type actuator with cap Orifice diameter - 0.45 mm
02-10-01661 SECONDERY PACKAGING MATERIAL
100 000
CARTONMade of boxboard: 320gms.Dimension : Height -100mm Width - 50 mm Breath - 35 mmThree colour printing
02-10-01662 DIRECTION CIRCULAR 2 000 000Printed on apaper in three colour printing Dimension : Width - 240 mm Height - 115 mm six vertical folds
three horizontal folds
Raw Material for Vet. Drugs
02-10-01663 1)Tylosin tartrate U. S. P23, BP98, BP Vet. 93 95-105% 2500002-10-01664 2) Neomycin sulphate (W. S. P.) U. S. P23, BP98, BP Vet. 93 95-110% 1000002-10-01665 3) Oxytetracyclin (HCL) W.S.P. U. S. P23, BP98, BP Vet. 93 90-115% 500002-10-01666 4) Ampicilin trihydrate W.S.P. U. S. P23, BP98, BP Vet. 93 90-110% 500002-10-01667 5) Amoxycillin trihydrate W.S.P. U. S. P23, BP98, BP Vet. 93 NLT. 92% 400002-10-01668 6) Sulfa merazin U. S. P23, BP98, BP Vet. 93 92.5-101% 100002-10-01669 7)Flumequin (W.S.P.) U. S. P23, BP98, BP Vet. 93 --- 5000 Kg02-10-01670 8) Amprolium HCL (W.S.P.) U. S. P23, BP98, BP Vet. 93 97.5-101% 10000 Kg02-10-01671 9) Trimethoprim U. S. P23, BP98, BP Vet. 93 92-107% 300002-10-01672 10) Sulfadiazine U. S. P23, BP98, BP Vet. 93 92.5-107% 1000002-10-01673 11) Vit. A acetate 500000 (I.U) (W.S.P.)U. S. P23, BP98, BP Vet. 93 NLT. 500000 I.U 400002-10-01674 12) Vit. D3 (W.S.P.) 40000000 I.U orU. S. P23, BP98, BP Vet. 93 NLT. 500000 I.U 15002-10-01675 13) Vit. D3 500000 I.U U. S. P23, BP98, BP Vet. 93 NLT. 500000 I.U 2500 Kg02-10-01676 14) Vit. E adsorbate 33% U. S. P23, BP98, BP Vet. 93 0.5 million I.U 1000002-10-01677 15) Vit. E adsorbate 50% U. S. P23, BP98, BP Vet. 93 0.5 million I.U 5000 Kg02-10-01678 16) Vit. C (W.S.P.) U. S. P23, BP98, BP Vet. 93 ---- 10000 Kg02-10-01679 17) Vit. B1 (W.S.P.) U. S. P23, BP98, BP Vet. 93 98-101% 50002-10-01680 18) Vit. B2 (W.S.P.) U. S. P23, BP98, BP Vet. 93 98-101% 40002-10-01681 19) Nicotin amide (W.S.P.) U. S. P23, BP98, BP Vet. 93 99-101% 30002-10-01682 20) Vit. B12 (W.S.P.) U. S. P23, BP98, BP Vet. 93 98-101% 1002-10-01683 21) Vit. B6 (W.S.P.) U. S. P23, BP98, BP Vet. 93 98-101% 10002-10-01684 22) Vit. K3 (W.S.P.) U. S. P23, BP98, BP Vet. 93 98.5-101% 50002-10-01685 23) Folic acid U. S. P23, BP98, BP Vet. 93 98-101% 50 Kg02-10-01686 24) Manganese sulphate (W.S.P.)U. S. P23, BP98, BP Vet. 93 NLT. 98% 50002-10-01687 25) Ferrous sulphate (W.S.P.) U. S. P23, BP98, BP Vet. 93 99.5-104.5% 500 Kg02-10-01688 26) Zinc sulphate (W.S.P.) U. S. P23, BP98, BP Vet. 93 99-104% 50002-10-01689 27) Sod. C. M. C U. S. P23, BP98, BP Vet. 93 6.5-9.5% 30002-10-01690 28) Cal. Diphosphate U. S. P23, BP98, BP Vet. 93 Assay BBC63 400 Kg02-10-01691 29) Copper sulphate (W.S.P.) U. S. P23, BP98, BP Vet. 93 NLT. 98% 200 Kg
02-10-01692 30) Cal. Carbonate U. S. P23, BP98, BP Vet. 93 --- 400002-10-01693 31) Malt. Diastase U. S. P23, BP98, BP Vet. 93 --- 10002-10-01694 32) Mag. Glycero phosphate U. S. P23, BP98, BP Vet. 93 Assay BBC63 20002-10-01695 33) Cal. Glycero phosphate U. S. P23, BP98, BP Vet. 93 Assay BBC63 50002-10-01696 34) Sod. Glycero phosphate U. S. P23, BP98, BP Vet. 93 Assay BBC63 25002-10-01697 35) Sod. E. D. T. A U. S. P23, BP98, BP Vet. 93 98.5-101% 150 Kg02-10-01698 36) Sod. Benzoate U. S. P23, BP98, BP Vet. 93 99-100.5% 20002-10-01699 37) Sod. Citrate U. S. P23, BP98, BP Vet. 93 99-101% 300 Kg02-10-01700 38) Sod. Bicarbonate U. S. P23, BP98, BP Vet. 93 --- 600002-10-01701
39) Pot. Iodide U. S. P23, BP98, BP Vet. 93
Qty. test 98.5% of Ca.
Carbonate 100 Kg02-10-01702 40) Magnesium sulphate U. S. P23, BP98, BP Vet. 93 --- 1000 Kg02-10-01703 41) Methyl paraben U. S. P23, BP98, BP Vet. 93 99.5-110% 50002-10-01704 42) Propyl paraben U. S. P23, BP98, BP Vet. 93 99.5-110% 25002-10-01705
43) Lactose U. S. P23, BP98, BP Vet. 93Qty.
Identification 19 100000 Kg02-10-01706
44) Yeast extract U. S. P23, BP98, BP Vet. 93Qty. Yeast
(reagent test) 50002-10-01707
45) Glucose – mono hydrate U. S. P23, BP98, BP Vet. 93Qty.
Identification 19 200000 Kg02-10-01708 46) P. V. P U. S. P23, BP98, BP Vet. 93 11.5-12.5% 500 Kg02-10-01709 47) Aerosil U. S. P23, BP98, BP Vet. 93 97-108% 1500 Kg02-10-01710 48) Xanthane U. S. P23, BP98, BP Vet. 93 4.5-5% 250 Kg02-10-01711 49) Citric acid U. S. P23, BP98, BP Vet. 93 99.5-105% 1000 Kg02-10-01712 50) Gentamycin sulphate U. S. P23, BP98, BP Vet. 93 99.5-105% 100002-10-01713 51) Colistin sulphate U. S. P23, BP98, BP Vet. 93 95-105% 100002-10-01714 52) Oxyfendazole BP Vet. 85 97-100.5% 100002-10-01715 53) Doxycyclin HCL U. S. P23, BP98, BP Vet. 93 98-110% 200002-10-01716 54) Chlorotetracycline U. S. P23, BP98, BP Vet. 93 98-110% 100002-10-01717 55) Norofloxacine U. S. P23, BP98, BP Vet. 93 95-105% 100002-10-01718 56) Enrofloxacine U. S. P23, BP98, BP Vet. 93 95-105% 1000 Kg02-10-01719 57) Albendazole U. S. P23, BP98, BP Vet. 93 98-101% 50002-10-01720 58) Furaltadone Hcl U. S. P23, BP98, BP Vet. 93 98-101% 300002-10-01721 59) Furazolidone Hcl U. S. P23, BP98, BP Vet. 93 95-105% 200002-10-01722 60) Streptomycin sulphate U. S. P23, BP98, BP Vet. 93 95-105% 50002-10-01723 61) Chloromphenicol base U. S. P23, BP98, BP Vet. 93 95-105% 1000002-10-01724 62) Benzathin Penicillin U. S. P23, BP98, BP Vet. 93 95-105% 100 Kg02-10-01725 63) Hydrocortisone Acetate U. S. P23, BP98, BP Vet. 93 95-105% 2502-10-01726 64) Betamethason sod. PhosphateU. S. P23, BP98, BP Vet. 93 95-105% 5002-10-01727 65) Magnesium stearate U. S. P23, BP98, BP Vet. 93 95-105% 25002-10-01728 66) Cetrimide U. S. P23, BP98, BP Vet. 93 95-105% 50002-10-01729 67) Methyl salicylate U. S. P23, BP98, BP Vet. 93 95-105% 500 Kg02-10-01730 68) Menthol U. S. P23, BP98, BP Vet. 93 95-105% 10002-10-01731 69) Iodine U. S. P23, BP98, BP Vet. 93 95-105% 2502-10-01732 70) Chlorohexidine gluconate U. S. P23, BP98, BP Vet. 93 95-105% 10002-10-01733 71) Phenol U. S. P23, BP98, BP Vet. 93 95-105% 15002-10-01734 72) Dimethicon U. S. P23, BP98, BP Vet. 93 95-105% 10002-10-01735 73) Nystatin U. S. P23, BP98, BP Vet. 93 95-105% 10002-10-01736 74) Cloxacillin sod. U. S. P23, BP98, BP Vet. 93 95-105% 10002-10-01737 75) Chlorocresol U. S. P23, BP98, BP Vet. 93 95-105% 2502-10-01738 76) Liquid Paraffin U. S. P23, BP98, BP Vet. 93 95-105% 1000 Kg02-10-01739 77) White soft paraffin U. S. P23, BP98, BP Vet. 93 95-105% 1000 Kg02-10-01740 78) Gelatin U. S. P23, BP98, BP Vet. 93 95-105% 25002-10-01741 79) Gglyecerin U. S. P23, BP98, BP Vet. 93 95-105% 1000 Kg02-10-01742 80) Sod.hydroxide U. S. P23, BP98, BP Vet. 93 95-105% 200 Kg02-10-01743 81) Pipernoil butoxide U. S. P23, BP98, BP Vet. 93 95-105% 100
02-10-01744 82) Cetostearyl alcohol U. S. P23, BP98, BP Vet. 93 95-105% 25002-10-01745 83) Lanoline U. S. P23, BP98, BP Vet. 93 95-105% 25002-10-01746 84) Turpantine Oil U. S. P23, BP98, BP Vet. 93 95-105% 25002-10-01747 85) PePPermint Oil U. S. P23, BP98, BP Vet. 93 95-105% 5002-10-01748 86) Tween 80 U. S. P23, BP98, BP Vet. 93 95-105% 50002-10-01749 87) Hard paraffine U. S. P23, BP98, BP Vet. 93 95-105% 25002-10-01750