Rate analsis Chapter No. 12 (Wood Work)

Page 1

CHAPTER NO. 12

WOOD WORK

DESCRIPTION OF ITEM NO. 1: Plain wood work sawn wrought planed & fixedin position including cost of nails & screws etc.

a) Deodar Wood.

Detail Unit Rate (British System) per Cft

Qty RatePer Unit (Rs.) Amount (Rs.)

Material

Deodar Wood including wastage (II Class) 1.15 Cft 500.00 P. Cft 575.00 Nail 0.020 Kg. 43.00 P. Cft 0.86 Screws above 1" long 1.00 Dozen 3.25 P.Doz 3.25

Total 579.11 Contractor's Profit & Overheads 20 Percent 115.82 Total 694.93

Labour

Carpentre 0.63 No 300.00 P. Day 189.00 Cooly Skilled 0.25 No 160.00 P. Day 40.00

Total 229.00 Sundries 10 Percent 22.90 Total 251.90

Contractor's Profit & Overheads 20 Percent 50.38 Total 302.28

Item Rates

Labour Rate Per Cft Rs. 302.28 Say 302.30 Labour Rate Per Cum Rs. ### Say 10,676.55

Composite Rate Per Cft Rs. 997.21 Say 997.20 Composite Rate Per Cum Rs. ### Say 35,221.55

Page 2

Item No. 1 Plain wood work sawn wrought planed & fixedin position including cost of nails & screws etc.

b) Shisham Wood



Material

Shisham wood including 15% wastage 1.15 Cft 300.00 P. Cft 345.00 Nail 0.023 Kg. 43.00 P. Cft 0.99 Screws above 1" long 1.00 Dozen 3.25 P.Doz 3.25


Labour for 1.50 Cft.

Carpenters 1.00 No 300.00 P. Day 300.00 Cooly Skilled 0.50 No 160.00 P. Day 80.00


Contractor's Profit & Overheads 20 Percent 83.60 Total 501.60 Labour for 1 Cft. 334.40

Item Rates

Labour Rate Per Cft Rs. 334.40 Say 334.40 Labour Rate Per Cum Rs. ### Say 11,811.00


Page 3

DESCRIPTION OF ITEM NO. 2: Plain wood work for regulation karries orneedles etc. including sawing plainingwroughting wood providing & fixing steel partsof karries i.e. end strips and rods etc.

a) Deodar Wood.



Material

i) Deodar Wood

5.5x5/12x5/12 = 0.97 0.97 CftWastage 15% 0.15 Cft

1.12 Cft 500.00 P. Cft 560.00 ii) 1.6' (480mm) long iron strip 1½"

(37mm) wide x1/8" (3mm) thick @

0.625 Lbs/ft. (0.930 Kg/Mtr). 2.00 Lbs2 Nox1¼' (380mm) long iron bars

¾" Ø (20mm) on both ends @ 1.502

Lbs/ft. (2.235 Kg/m). 3.80 Lbs5.80 Lbs

Wastage 5% 0.29 Lbs6.09Lb (2 .76)Kg 28.00 P. Kg 77.28

iii) Iron Screw 1" (25mm) long 1.00 Dozen 1.68 P. Doz 1.68


Page 4



Labour




Item Rates

Labour Rate Per Cft Rs. 179.52 Say 179.50 Labour Rate Per Cum Rs. 6,340.65 Say 6,340.65


Page 5

Item No. 2 Plain wood work for regulation karries or needlesetc. including sawing plaining wroughting wood,providing & fixing steel parts of karries i.e. endstrips and rods etc.

b) Shisham Wood



Material

i) Shisham Wood

5.5x5/12x5/12 = 0.97 0.97 CftWastage 15% 0.15 Cft

1.12 Cft 300.00 P. Cft 336.00 ii) Iron Strip

1.6' (480mm) long iron strip 1½"

(37mm) wide x1/8" (3mm) thick @

0.625 Lbs/ft. (0.930 Kg/Mtr). 2.00 Lbs2 Nox1¼' (380mm) long iron bars

¾" Ø (20mm) on both ends @ 1.502

Lbs/ft. (2.235 Kg/m). 3.80 Lbs5.80 Lbs

Wastage 5% 0.29 Lbs6.09Lb (2 .76)Kg 28.00 P. Kg 77.28

iii) Iron Screw 1" (25mm) long 1.00 Dozen 1.68 P. Doz 1.68


Page 6



Labour




Item Rates

Labour Rate Per Cft Rs. 179.52 Say 179.50 Labour Rate Per Cum Rs. 6,340.65 Say 6,340.65


Page 7

DESCRIPTION OF ITEM NO 3: First class teak wood wrought joinery in door &windows etc. panelled, panelled and glazed or fullyglazed & fixed in position including chowkhat holdfast tower bolts, chocks rubber stop, cleats/G.I.clamps, chords with hooks, nails screws etc.complete (Excluding sliding bolt and lock).

i) 2" (50mm) Thick.

Detail Unit Rate (British System) per Sft


Rate Analysis for 4' x 6.75' = 27 Sft

Material

Teak Wood

Frame

Top Rail 4¾'x3"x4½" 0.45 CftVertical 2x7'x3"x4½" 1.33 CftVertical Style 4x6'-6½"x4"x2" 1.46 CftHorizental Rail 2x1'-10"x4"x2" 0.20 CftMiddle Rail 2x1'-10"x6"x2" 0.20 CftLock Rail 2x1'-10"x6"x2" 0.31 CftBottom Rail 2x1'-10"x8"x2" 0.42 Cft

Panells

2x14"x22"x¾" 0.27 Cft4x14"x18.5"x¾" 0.45 Cft

Beading

2(14"+14"+22"+22")x5/8" 0.02 Cft

2x8

4(14"+14"+18½"+18½")5/8" 0.02 Cft

2x85.13 Cft

Wastage 12% 0.62 Cft5.75 Cft 1400.00 P. Cft 8,050.00

(1½ + 2½)

(1½ + 2½)

Page 8



Fitting

Hinges 4" (100mm) 8.00 Nos 4.60 Each 36.80 Tower Bolts 9" (225mm) 3.00 Nos 17.00 Each 51.00 Handles 6" (150mm) 3.00 Nos 8.00 Each 24.00 Iron Hold Fast 6.00 Nos 8.00 Each 48.00 Rubber Pad 2.00 Nos 4.00 Each 8.00 Hook & Clamps 2.00 Nos 4.00 Each 8.00 Screws above 1" long 2.50 Doz 3.25 P. Doz 8.13 Glue 0.05 Kg. 80.00 P. Kg. 4.00 Spikes 0.20 Kg. 30.00 P. Kg. 6.00

Total 8,243.92 Contractor's Profit & Overheads 20 Percent 1,648.78 Total for 27 Sft. 9,892.71

Rate Per Sft 9892.71 = 366.40 27

Labour

Carpenters 3.00 Nos 300.00 P. Day 900.00 Cooly Unskilled 1.25 Nos 140.00 P. Day 175.00

Total 1,075.00 Sundries 10 Percent 107.50 Total 1,182.50

Contractor's Profit & Overheads 20 Percent 236.50 Total for 27 Sft. 1,419.00

Rate Per Sft 1419.00 = 52.56 27

Item Rates

Labour Rate Per Sft Rs. 52.56 Say 52.55 Labour Rate Per Sqm Rs. 565.50 Say 565.50

Composite Rate Per Sft Rs. 418.95 Say 418.90 Composite Rate Per Sqm Rs. 4,507.87 Say 4,507.85

Page 9

Item No. 3 First class teak wood wrought joinery in door &windows etc. panelled, panelled and glazed or fullyglazed & fixed in position including chowkhathold fast tower bolts, chocks rubber stop, cleats/G.I. clamps, chords with hooks, nails screws etc.complete (Excluding sliding bolt and lock).

ii) 1¾" (45mm) Thick.




Material

Teak Wood

Frame

Top Rail 4¾'x3"x4½" 0.45 CftVertical 2x7'x3"x4½" 1.33 CftVertical Style 4x6'-6½"x4"x1¾" 1.25 Cft

Horizontal Rail

Top 2x1'-10"x4"x1¾" 0.18 CftMiddle 2x1'-10"x4"x1¾" 0.18 CftLock 2x1'-10"x6"x1¾" 0.27 CftBottom 2x1'-10"x8"x1¾" 0.36 Cft

Panels

2x14"x22"x¾" 0.27 Cft4x14"x18.5"x¾" 0.44 Cft

Beading

2(14"x14"x22"+22")x5/8" 0.01 Cft

2x8

4(14"+14"+18.5"+18.5")5/8" 0.02 Cft

2x84.76 Cft


(1½ + 2½)

(1½ + 2½)

Page 10



Fitting 7,462.00



Rate Per Sft 9187.11 = 340.26 27

Labour

Carpenters 3.00 Nos 300.00 P. Day 900.00 Cooly Unskilled 1.25 Nos 140.00 P. Day 175.00


Contractor's Profit & Overheads 20 Percent 236.50 Total for 27 Sft. 1,419.00

Rate Per Sft 1419.00 = 52.56 27

Item Rates



Page 11

Item No. 3 First class teak wood wrought joinery in door &windows etc. panelled, panelled and glazed or fullyglazed & fixed in position including chowkhathold fast tower bolts, chocks rubber stop, cleats/G.I. clamps, chords with hooks, nails screws etc.complete (Excluding sliding bolt and lock).

iii) 1½" (37mm) Thick.




Material

Teak Wood for Frame

Frame

Top Rail 1x4¾'x3"x4½" 0.45 CftVertical 2x7'x3"x4½" 1.33 CftVertical style 4x6'-6½"x4"x1½" 1.08 Cft

Leaves

Top Rail 2x1'-10"x4"x1½" 0.15 CftMiddle 2x1'-10"x4"x1½" 0.15 CftLock 2x1'-10"x6"x1½" 0.23 CftBottom 1x1'-10"x8"x1½" 0.30 Cft

Panels

2x14"x22"x5/8" 0.23 Cft4x14"x18.5"x5/8" 0.44 Cft

Beading

2(14"x14"x22"+22")x5/8" 0.01 Cft

2x8

4(14"+14"+18.5"+18.5")5/8" 0.02 Cft

2x84.39 Cft


(1½ + 2½)

(1½ + 2½)

Page 12



6,888.00 Fitting



Rate Per Sft 8498.31 = 314.75 27

Labour

Carpenters 3.00 Nos 300.00 P. Day 900.00 Unskilled Cooly 1.25 Nos 140.00 P. Day 175.00

Total 1,075.00 Sundries 10 Percent 107.50 Total 1,182.50 Contractor's Profit & Overheads 20 Percent 236.50 Total for 27 Sft. 1,419.00

Rate Per Sft 1419.00 = 52.56 27

Item Rates



Page 13

DESCRIPTION OF ITEM NO 4: First class teak wood wrought joinery in wiregauze doors & windows with frames 22 SWGgalvanized iron wire gauze 12x12 meshes tosquare inchs (625mm) including brass fitting sash bars etc. complete :

a) Teak wood framing 1¾" (45mm) thick with wiregauze fixed in position:

i) Without spring or spring hinges.




Material

Teak Wood

Top Rail 1x4'x3"x½" 0.04 CftVertical 2x7'x3"x½" 0.15 CftFillet 2(15½"+15½"+25"+25")1½"x3/8" 0.02 CftFillet 2(15½"+15½"+19"+19")x½"x3/8" 0.03 Cft

Leaf

Vertical Style 4x6'-6½"x4"x1¾" 1.27 Cft

Horizontal

Top 2x1'-10½"x1½"x1¾" 0.06 CftMiddle 2x1'-10½"x3"x1¾" 0.07 CftLock 2x1'-10½"x6"x1¾" 0.27 CftBottom 2x1'-10½"x6"x1¾" 0.27 Cft

2.18 CftWastage 10% 0.22 Cft

2.40 Cft 1400.00 P. Cft 3,360.00

Page 14



Fitting 3,360.00

Hinges 4" (100mm) 6.00 Nos 4.60 Each 27.60 Tower Bolts 9" (225mm) 2.00 Nos 17.00 Each 34.00 Handles 6" (150mm) 2.00 Nos 8.00 Each 16.00 Hook & Clamps 2.00 Nos 4.00 Each 8.00 Screws above 1" long 2.00 Doz 3.25 P. Doz 6.50

Wire Gauze

2x1'-2"x2'-1" 4.83 Sft4x1'-2"x1'-7" 7.33 Sft

12.16 SftWastage 15% 1.82 Sft

13.98 Sft 6.00 Sft 83.90

Total 3,536.00 Contractor's Profit & Overheads 20 Percent 707.20 Total for 27 Sft 4,243.20

Rate Per Sft 4243.20 = 157.16 27

Labour

Carpenters 0.50 Nos 300.00 P. Day 150.00 Skilled Cooly 0.25 No 160.00 P. Day 40.00

Total 190.00 Sundries 10 Percent 19.00 Total 209.00 Contractor's Profit & Overheads 20 Percent 41.80 Total for 27 Sft 250.80 Rate Per Sft 250.80 = 9.29

27Item Rates



Page 15

DESCRIPTION OF ITEM NO 4: First class teak wood wrought joinery in wiregauze doors & windows with frames 22 SWGgalvanized iron wire gauze 12x12 meshes tosquare inch (625mm) including brass fitting sash bars etc. complete :

a) Teak wood framing 1¾" (45mm) thick with wiregauze fixed in position:

ii) With spring or spring hinges.




Material

Teak Wood

Top Rail 1x4'x3"x½" 0.04 CftVertical 2x7'x3"x½" 0.15 CftFillet 2(15½"+15½"+25"+25")1½"x3/8" 0.02 CftFillet 2(15½"+15½"+19"+19")1½"x3/8" 0.03 Cft

Leaf

Vertical Style = 4'x6'-6½"x4"x1¾" 1.27 Cft

Horizontal

Top 2x1'-10½"x1½"x1¾" 0.06 CftMiddle 2x1'-10½"x3"x1¾" 0.07 CftLock 2x1'-10½"x6"x1¾" 0.27 CftBottom 2x1'-10½"x6"x1¾" 0.27 Cft


2.40 Cft 1400.00 P. Cft 3,360.00

Page 16



Fitting

Hinges 4" (100mm) 6.00 Nos 4.60 Each 27.60 Tower Bolts 9" (225mm) 2.00 Nos 17.00 Each 34.00 Handles 6" (150mm) 2.00 Nos 8.00 Each 16.00 Hook & Clamps 2.00 Nos 4.00 Each 8.00 Screws / Nail 2.00 Doz 3.25 P. Doz 6.50 Spring Hings 2.00 Nos 44.00 Each 88.00

Wire Gauze

2x1'-2"x2'-1" = 4.83 Sft4x1'-2"x1'-7" = 7.33 Sft


13.38 Sft 6.00 Sft 80.28

Total 3,620.38 Contractor's Profit & Overheads 20 Percent 724.08 Total for 27 Sft. 3,986.80 Rate Per Sft 3986.80 = 147.66

27Labour


Total 190.00 Sundries 10 Percent 19.00 Total 209.00 Contractor's Profit & Overheads 20 Percent 41.80 Total 250.80 Rate Per Sft 250.80 = 9.29

27Item Rates



Page 17

Item No. 4 First class teak wood wrought joinery in wiregauze doors & windows with frames 22 SWGgalvanized iron wire gauze 12x12 meshes tosquare inch (625mm) including brass fitting sashbars etc. complete:

b) Teak wood framing 1½" (40mm) thick with wiregauze fixed in position.

i) Without spring or spring hinges.




Material

Ist Class Teak Wood

Vertical Style 4x6'-6½"x4"x1½" 1.09 Cft

Horizontal

Top Rail 2x1-10½"x3"x1½" 0.12 CftMiddle 2x1-10½"x1½"x1½" 0.06 CftLock 2x1'-10½"x6"x1½" 0.24 CftBottom 2x1'-10½"x6"x1½" 0.24 CftFillet 2(15½"+15½"+25"+25")½"x3/8" 0.02 CftFillet 2(15½"+15½"+19"+19")½"x3/8" 0.03 CftTop Rail 1x4'x3"x½" 0.05 CftVertical Rail 2x7'x3"x½" 0.15 Cft


2.20 Cft 1400.00 P. Cft 3,080.00 Fitting

Hinges 4" (100mm) 6 Nos 4.60 Each 27.60 Tower Bolts 9" (225mm) 2 Nos 17.00 Each 34.00 Handles 6" (150mm) 2 Nos 8.00 Each 16.00 Hook & Clamps 2 Nos 4.00 Each 8.00 Screws / Nail 2 Doz 3.25 P. Doz 6.50

Page 18



Wire Gauze

2x1'-2"x2'-1" 4.83 Sft4x1'-2"x1'-7" 7.33 Sft


13.98 Sft 6.00 Sft 83.88

Total 3,255.98 Contractor's Profit & Overheads 20 Percent 651.20 Total for 27 Sft. 3,907.18

Rate Per Sft 3907.18 = 144.71 27

Labour



Contractor's Profit & Overheads 20 Percent 41.80 Total for 27 Sft. 250.80

Rate Per Sft 250.80 = 9.29 27

Item Rates



Page 19


b) Teak wood framing 1½" (40mm) thick with wiregauze fixed in position.

ii) With spring or spring hinges.




Material

Ist Class Teak Wood

Vertical Style 4x6-6½"x4"x1½" 1.09 Cft

Horizontal

Top Rail 2x1'-10½"x3"x1½" 0.12 CftMiddle 2x1'-10½"x1½"x1½" 0.06 CftLock 2x1'-10½"x6"x1½" 0.24 CftBottom 2x1'-10½"x6"x1½" 0.24 CftFillet 2(15½"+15½"+25"+25")½"x3/8" 0.02 CftFillet 2(15½"+15½"+19"+19")½"x3/8" 0.03 CftTop Rail 1x4'x3"x½" 0.05 CftVertical Rail 2x7'x3"x½" 0.15 Cft


2.20 Cft 1400.00 P. Cft 3,080.00 Fitting

Hinges 4" (100mm) 6 Nos 4.60 Each 27.60 Tower Bolts 9" (225mm) 2 Nos 17.00 Each 34.00 Handles 6" (150mm) 2 Nos 8.00 Each 16.00 Hook & Clamps 2 Nos 4.00 Each 8.00 Screws / Nail 2 Doz 3.25 Doz 6.50 Spring hings 2 Nos 44.00 Each 88.00

Page 20



Wire Gauze

2x1'-2"x2'-1" 4.83 Sft4x1'-2"x1'-7" 7.33 Sft


13.98 Sft 6.00 Sft 83.88


Rate Per Sft 4012.78 = 148.62 27

Labour




Rate Per Sft 250.80 = 9.29 27

Item Rates



Page 21


c) G.I. Wire gauze 22 SWG 12x12 meshes per SqInch (25mm) fixed to chowkhat with ¾" (20mm)teak wood strips and screws.



Rate Analysis for 3' x 4' = 12 Sft

Material

Teak Wood

Horizontal Strips 2x3'x3"x¾" 0.09 CftVertital Strips 2x3.5'x3"x¾" 0.11 Cft


0.23 Cft 1400.00 P. Cft 322.00 Wire gauze = 1x3x4 12 SftWastage 10% 1.2 Sft

13.20 Sft 6.00 Sft 79.20

Fitting

Screws above 1" long 2.00 Doz 3.25 Doz 6.50 Nail 0.07 Kg. 43.00 P. Kg. 3.01

Total 410.71 Contractor's Profit & Overheads 20 Percent 82.14 Total for 12 Sft. 492.85

Rate Per Sft 492.85 = 41.07 12

Page 22



Labour

Carpenters 0.40 No 300.00 P. Day 120.00 Skilled Cooly 0.20 No 160.00 P. Day 32.00

Total 152.00 Sundries 10 Percent 15.20 Total 167.20 Contractor's Profit & Overheads 20 Percent 33.44 Total for 12 Sft. 200.64

Rate Per Sft 200.64 = 16.72 12

Item Rates


Composite Rate Per Sft Rs. 57.79 Say 57.80 Composite Rate Per Sqm Rs. 621.83 Say 621.85

Page 23


d) G.I. Wire gauze 22 SWG 12x12 meshes per SqInch (25mm) fixed with ½" (12mm) teakwood strips and screws.




Material

Teak Wood

Horizontal Rail 2x4'x2"x2" 0.22 CftVertital Rail 2x2'x2"x2" 0.11 CftStrip Rail 2x4'x2"x2" 0.05 CftStrips Rail 2x1 2/3'x2"x2" 0.03 CftMoulding 0.15 Cft


0.65 Cft 1400.00 P. Cft 910.00

Wire gauze 12x12 meshes/Sq. in (25mm)

Area 4x2 = 8 Sft. 8.00 SftWastage 10% 0.80 Sft

8.80 Sft 6.00 Sft 52.80 Fitting

Screws 2.00 Doz 3.25 P. Doz 6.50 Nail 0.07 Doz 43.00 P. Doz 3.01 Wooden Plug 6.00 Nos 0.50 Each 3.00

Total 975.31 Contractor's Profit & Overheads 20 Percent 195.06 Total for 8 Sft 1,170.37

Rate Per Sft 1170.37 = 146.30 8

Page 24



Labour




Rate Per Sft 125.40 = 15.68 8

Item Rates



Page 25

DESCRIPTION OF ITEM NO 5: Providing and fixing expanded metal ½" to ¾"(12mm to 20mm) mesh 16 gauze fixed tochowkhat with 1" (25mm) teak wood strips andscrews etc. complete.




Material

Teak Wood

Cover moulding/ Strips.

2x2'x1/12'x3/12' 0.08 Cft2x3x10/12'x1/12'x3/12' 0.16 Cft


0.28 Cft 1400.00 P. Cft 392.00 Expended Metal

4'x2' 8.00 SftWastage 5% 0.40 Sft

8.40 Sft 6.67 Sft 56.03 Nail and Screw 2.00 Doz 3.25 P. Doz 6.50

Total 454.53 Contractor's Profit & Overheads 20 Percent 90.91 Total for 8 Sft. 545.43 Rate Per Sft 545.43 = 68.18

8

Labour


Total 115.00 Sundries 10 Percent 11.50 Total 126.50 Contractor's Profit & Overheads 20 Percent 25.30 Total for 8 Sft. 151.80 Rate Per Sft 151.80 = 18.98

8Item Rates



Page 26

DESCRIPTION OF ITEM NO 6: Providing and fixing expanded metal ½" to ¾" (12mm to 20mm) mesh 16 gauze fixed to chowkhatwith 1" (25mm) cover moulding & screwsincluding teak wood frame 2"x2" (50x50mm).




Material

Teak Wood Frame

2Nox4'x2"x2" 0.23 Cft2Nox3'x2"x2" 0.17 CftMoulding 13 2/3x1/12x2/12 0.20 Cft


0.69 Cft 1400.00 P. Cft 966.00 Expanded Metal

1'x4'x3' 12.00 SftWastage 5% 0.60 Sft

12.60 Sft 6.67 Sft 84.04 Nail and Screw L.S. 8.00 Total 1,058.04 Contractor's Profit & Overheads 20 Percent 211.61 Total for 12 Sft. 1,269.65 Rate Per Sft 1269.65 = 105.80

12Labour



12Item Rates



Page 27

DESCRIPTION OF ITEM NO 7: First class deodar wood wrought joinery in doors andwindows etc. panelled or panelled or glazed or fullyglazed fixed in position including chowkhat, holdfast, hinges, tower bolt rubber stop cleats/G I clamp,handles and chord with hooks etc. complete(excluding sliding bolts or lock)

a) 2" (50mm) thick.




Material

Top Rail 4¾x3"x4½" 0.45 CftVertical Rail 2x7'x3"x4½" 1.33 CftVertical Style 4x6'x6½"x4"x2" 1.46 CftHorizotal Style 2x1'-10"x4"x2" 0.20 CftMiddle Style 2x1'-10"x4"x2" 0.20 CftMiddle Style 2x1'-10"x4"x2" 0.31 CftBottom Style 2x1'-10"x8"x2" 0.42 Cft

Panells

2'x14"x22"x¾" 0.27 Cft4'x14"x18.5"x¾" 0.45 Cft

Beading 0.02 Cft

2x80.02 Cft

2x85.13 Cft


2(14"+14"+22"+22")5/8"(1½"+2½")

4(14"+18.5"+18.5")5/8"(1½"+2½")

Page 28



Fitting

Hinges 4" (100mm) 8.00 Nos 4.60 Each 36.80 Tower Bolts 9" (225mm) 3.00 Nos 17.00 Each 51.00 Handles 6" (150mm) 3.00 Nos 8.00 Each 24.00 Iron Hold Fast 6.00 Nos 8.00 Each 48.00 Rubber Pad 2.00 Nos 4.00 Each 8.00 Hook & Clamps 2.00 Nos 4.00 Each 8.00 Screws / Nail 2.50 Doz 3.25 Doz 8.13 Glue 0.05 Kg. 80.00 P. Kg. 4.00 Spikes 0.20 Kg. 30.00 P. Kg. 6.00


27Labour



Contractor's Profit & Overheads 20 Percent 233.20 Total for 27 Sft. 1,399.20 Rate Per Sft 1399.20 = 51.82

27Item Rates



Page 29

Item No. 7 First class deodar wood wrought joinery in doors andwindows etc. panelled or panelled or glazed or fullyglazed fixed in position including chowkhat, holdfast, hinges, tower bolt rubber stop cleats/G I clamp,handles and chord with hooks etc. complete(excluding sliding bolts or lock)

b) 1¾" (45mm) thick.




Material

Top Rail 4¾x3"x4½" 0.45 CftVertical Rail 2x7'x3"x4½" 1.33 CftVertical Style 4x6-6½"x4"x1¾" 1.25 Cft

Horizontal Rail

Top 2x1'-10"x4"x1¾" 0.18 CftMiddle 2x1'-10"x4"x1¾" 0.18 CftLock 2x1'-10"x6"x1¾" 0.27 CftBottom 2x1'-10"x8"x1¾" 0.36 Cft

Panells

2'x14"x22"x¾" 0.27 Cft4'x14"x18.5"x¾" 0.44 Cft

Beadings 0.01 Cft

2x80.02 Cft

2x84.76 Cft


2(14"+14"+22"+22")5/8" (1½"+2½")

4(14"+14"+18.5"+18.5")5/8"(1½"+2½")

Page 30



Fitting

Hinges 4" (100mm) 8.00 Nos 4.60 Each 36.80 Tower Bolts 9" (225mm) 3.00 Nos 17.00 Each 51.00 Handles 6" (150mm) 3.00 Nos 8.00 Each 24.00 Iron Hold Fast 6.00 Nos 8.00 Each 48.00 Rubber Pad 2.00 Nos 4.00 Each 8.00 Hook & Clamps 2.00 Nos 4.00 Each 8.00 Screws / Nail 2.50 Doz 3.25 Doz 8.13 Glue 0.05 Kg. 80.00 P. Kg. 4.00 Spikes 0.20 Kg. 30.00 P. Kg. 6.00

Total for 27 Sft. 3,202.42 Contractor's Profit & Overheads 20 Percent 640.48 Total for 27 Sft. 3,842.91 Rate Per Sft 3842.91 = 142.32

27Labour


Total 1,060.00 Sundries 10 Percent 106.00 Total 1,166.00 Contractor's Profit & Overheads 20 Percent 233.20 Total for 27 Sft. 1,399.21 Rate Per Sft 1399.21 = 51.82

27Item Rates



Page 31

Item No. 7 First class deodar wood wrought joinery in doors andwindows etc. panelled or panelled or glazed or fullyglazed fixed in position including chowkhat, holdfast, hinges, tower bolt rubber stop cleats/G I clamp,handles and chord with hooks etc. complete(excluding sliding bolts or lock)

c) 1½" (40mm) thick.




Material

Top Rail 1x4¾x3"x4½" 0.45 CftVertical Rail 2x7x3"x4½" 1.33 CftVertical Style 4x6'-6½"x4"x1½" 1.20 Cft

Horizontal Rail

Top 2x1'-10"x4"x1¾" 0.15 CftMiddle 2x1'-10"x4"x1½" 0.15 CftLock 2x1'-10"x6"x1½" 0.23 CftBottom 2x1'-10"x8"x1½" 0.30 Cft

Panells

2'x14"x22"x¾"x5/8" 0.22 Cft4'x14"x18.5"x5/8" 0.44 Cft

Beadings 0.01 Cft

2x80.02 Cft

2x84.50 Cft


2(14"+14"+22"+22")5/8"(1½"+2½")

4(14"+14"+18.5"+18.5")5/8"(1½"+2½")

Page 32



Fitting

Hinges 4" (100mm) 6.00 Nos 4.60 Each 27.60 Tower Bolts 9" (225mm) 3.00 Nos 17.00 Each 51.00 Handles 6" (150mm) 3.00 Nos 8.00 Each 24.00 Iron Hold Fast 6.00 Nos 8.00 Each 48.00 Rubber Pad 2.00 Nos 4.00 Each 8.00 Hook & Clamps 2.00 Nos 4.00 Each 8.00 Screws / Nail 2.50 Doz 3.25 Doz 8.13 Glue 0.05 Kg. 80.00 P. Kg. 4.00 Spibes 0.20 Kg. 30.00 P. Kg. 6.00


27Labour




27Item Rates



Page 33

DESCRIPTION OF ITEM NO 8: Deodar wood framed braced and battened doors &windows complete with iron fitting & fixed inposition including chowkhat.

a) 2¼"(55mm) thick with 1¼"(32mm) thick planks.




Material

Deodar Wood

Top Rail 1x3¾x3"x4½" 0.35 CftVertical Rail 2x7¼"x3"x4½" 1.36 Cft

Leaf

Plank 1x2 2/12x6 17/24x1/12 1.44 CftBattens 3x2x1/3'x3/8'x5/8' 0.27 CftBraces 2x3 47/48x3/8x5/8 0.31 Cft


4.29 Cft 500.00 P. Cft 2,145.00 Fitting

Hinges 10" (250mm) 3.00 Nos 10.00 Each 30.00 Tower Bolts 9" (225mm) 1.00 No 17.00 Each 17.00 Bolts 8" (200mm) with staple for pad

lock. 1.00 No 32.00 Each 32.00 Wrought Iron hold fast 6.00 Nos 4.00 Each 24.00 Hinges chocks 4" (100mm) 1.00 No 4.60 Each 4.60 Door stop 6" (150mm) 1.00 No 12.00 Each 12.00 Handles 6" (150mm) 2.00 Nos 8.00 Each 16.00 Screws above 1" long 2.00 Doz 3.25 Doz 6.50 Nails of sorts 0.06 Kg 43.00 P. Kg 2.58


Rate Per Sft 2747.62 = 130.84 21

Page 34



Labour


Total 910.00 Sundries 10 Percent 91.00 Total 1,001.00


21Item Rates



Page 35

Item No. 8 Deodar wood framed braced and battened doors &windows complete with iron fitting & fixed inposition including chowkhat.

b) 1¾" (45mm) thick with 1" (25mm) battens andplanking.



Rate Analysis for 3' x 6.5' = 19.5 Sft

Material

Deodar Wood

Top Rail 1x3¾'x¼'x3/8 0.35 CftVertical Rail 2x6¼'x¼x3/8 1.17 CftLeaf Plank 1x2 7/12x6 5/24x 1/16 1.00 CftLedges 2x3 13/20x1/3x1/12 0.20 CftBraces 2x3 13/20x1/3x1/12 0.20 Cft


3.36 Cft 500.00 P. Cft 1,680.00 Fitting

Hinges 5" (125mm) 3.00 Nos 5.60 Each 16.80 Tower Bolts 9" (225mm) 3.00 Nos 17.00 Each 51.00 Wrought Iron hold fast 4.00 Nos 7.00 Each 28.00 Hinges chocks 4" (100mm) 1.00 No 4.60 Each 4.60 Door stops 6" (150mm) 1.00 No 12.00 Each 12.00 Handles 6" (150mm) 2.00 Nos 8.00 Each 16.00 Screws above 1" long 2.00 Doz 3.25 P. Doz 6.50 Nails of sorts 0.06 Kg 43.00 P. Kg 2.58

Total 1,817.48 Contractor's Profit & Overheads 20 Percent 363.50 Total for 19.5 Sft. 2,180.98

Rate Per Sft 2180.98 = 111.84 19.5

Page 36



Labour



Contractor's Profit & Overheads 20 Percent 167.20 Total for 19.5 1,003.20

Rate Per Sft 1003.20 = 51.45 19.5

Item Rates



Page 37

DESCRIPTION OF ITEM NO 9: 1" (25mm) thick battened doors and windows fittedin position complete with iron fittings withoutchowkhat.



Rate Analysis for 100 Sft

Material

Deodar Wood 9.50 Cft 500.00 Cft 4,750.00 T. Hinges 6" (150mm) 4.00 Nos 14.00 Each 56.00 Tower bolt 6" (150mm) 2.00 Nos 9.58 Each 19.17 Stops 2.00 Nos 12.00 Each 24.00 Nails 0.063 Kg. 43.00 Kg. 2.71 Screws 2.00 Dozen 3.25 P. Doz 6.50


100Labour

Carpenters 16.00 Nos 300.00 P. Day 4,800.00 Skilled Cooly 3.00 Nos 160.00 P. Day 480.00


Contractor's Profit & Overheads 20 Percent 1,161.60 Total for 100 Sft. 6,969.60

Rate Per Sft 6969.60 = 69.70 100.0

Item Rates



Page 38

DESCRIPTION OF ITEM NO 10: Deodar battened ledged & braced doors andwindows 2¼" (56mm) thick (1¼" (30mm) thickledge braces and 1" thick battens complete withiron fittings chowkhats and fixed in position.



Rate Analysis for 3' x 6.5' = 19.5 Sft

Material

Deodar Wood

Chowkhat 2x6¾'x3"x4½" 1.30 Cft1x3"x3"x4½" 0.19 CftLeaf Batten 1x2'-7"x6"-3"x1/12 1.35 CftStyles 3x2'-5½"x4"-1¼" 0.26 CftBraces 2x3.0"x4"x1¼" 0.20 Cft


3.80 Cft 500.00 P. Cft 1,900.00 Fitting

Hinges Chocks 4" (100mm) 1.00 No 4.60 Each 4.60 Door Stop 6" (150mm) 1.00 No 3.00 Each 3.00 Tower Bolts 9" (225mm) 2.00 Nos 17.00 Each 34.00 Tower Hinges 8" (200mm) 2.00 Nos 13.00 Each 26.00 Wrought Iron hold fast 4.00 Nos 7.00 Each 28.00 Hasp and staple 1.00 No 12.00 Each 12.00 Handles 2.00 Nos 8.00 Each 16.00 Screws above 1' long 2.00 Doz 3.25 P. Doz 6.50 Nails of sorts 0.13 Kg 43.00 P. Kg 5.38

Total 2,035.47 Contractor's Profit & Overheads 20 Percent 407.09 Total for 19.5 Sft 2,237.69

Rate Per Sft 2237.69 = 114.75 19.5

Page 39



Labour



Contractor's Profit & Overheads 20 Percent 200.20 Total for 19.5 Sft. 1,201.20

Rate Per Sft 1201.20 = 61.60 19.5

Item Rates



Page 40

DESCRIPTION OF ITEM NO 11: a) Deodar wood framed with braces and 22 SWGG.I. Sheet facing including hold fast, woodenbeading, hinges and locking arrangement, asDirected by the Engineer Incharge.

i) G.I. Sheet facing one side




Material

Deodar Wood 7.00 Cft 550.00 Cft 3,850.00 22 gauge G.I. Plain sheet 64.00 SftWastage 10% 6.40 Sft

70.40 Sft 6.00 Sft 422.40 Hold fast with pivots & clamp 6.00 Nos 1.00 Each 6.00 Screws above 1" long 3.00 Doz 3.25 P. Doz 9.75 Sliding bolts 18" (450mm) long 1.00 No 80.00 Each 80.00 Nails 0.23 Kg 43.00 P. Kg 9.89


64

Labour


Total 1,290.00 Sundries 10 Percent 129.00 Total 1,419.00 Contractor's Profit & Overheads 20 Percent 283.80 Total for 64 Sft. 1,702.80 Rate Per Sft 1702.80 = 26.61

64.0Item Rates



Page 41

DESCRIPTION OF ITEM NO 11: a) Deodar wood framed with braces and 22 SWGG.I. Sheet facing including hold fast, woodenbeading, hinges and locking arrangement, asDirected by the Engineer Incharge.

ii) G.I. Sheet facing on both side.




Material

Deodar Wood 7.00 Cft 550.00 P. Cft 3,850.00 22 gauge G.I. Plain sheet 128.00 SftWastage 10% 12.80 Sft

140.80 Sft 6.00 Sft 844.80 Hold fast with pivots & clamp 6.00 Nos 1.00 Each 6.00 Screws above 1" long 3.00 Doz 3.25 P. Doz 9.75 Sliding bolts 1½" (450 mm) long 1.00 No 80.00 Each 80.00 Nails 0.47 Kg 43.00 P. Kg 20.21


64Labour




64.0Item Rates



Page 42

Item No. 11 b) Partal wood frame with braces & 22 SWG G.I.Sheet facing including hold fast wooden beadinghinges and locking arrangement as directed byEngineering incharge.

i) G.I. Sheet facing one side




Material

Partal Wood 7.00 Cft 350.00 P. Cft 2,450.00 22 gauge G.I. Plain sheet 64.00 SftWastage 10% 6.40 Sft

70.40 Sft 6.00 Sft 422.40 Hold fast with pivots & clamp 6.00 Nos 1.00 Each 6.00 Screws above 1" long 3.00 Doz 3.25 P. Doz 9.75 Sliding bolts 1½" (450 mm) long 1.00 No 80.00 Each 80.00 Nails 0.23 Kg 43.00 P. Kg 9.89


64

Labour



Contractor's Profit & Overheads 20 Percent 283.80 Total 1,702.80 Rate Per Sft 1702.80 = 26.61

64.0Item Rates



Page 43

Item No. 11 b) Partal wood frame with braces & 22 SWG G.I.Sheet facing including hold fast wooden beadinghinges and locking arrangement as directed byEngineering incharge.

ii) G.I. Sheet facing on both side



Rate Anaylsis for 8' x 8' = 64 Sft

Material

Partal Wood 7.00 Cft 350.00 P. Cft 2,450.00 22 gauge G.I. Plain sheet 128.00 SftWastage 10% 12.80 Sft

140.80 Sft 6.00 Sft 844.80 Hold fast with pivots & clamp 6.00 Nos 1.00 Each 6.00 Screws above 1" long 3.00 Doz 3.25 P. Doz 9.75 Sliding bolts 18" (450 mm) long 1.00 No 80.00 Each 80.00 Nails 0.47 Kg 43.00 P. Kg 20.21


64Labour




64.0Item Rates



Page 44

DESCRIPTION OF ITEM NO 12: First class deodar wood wrought joinery work inwire gauze doors and windows with 22 SWGgalvanized wire gauze 12x12 mashes per squareinch (625mm) including iron fittings complete.

a) Deodar framing 1¾" (45mm) with wire gauge fixed in position.

i) Without Springs or Spring Hinges.




Material

Deodar Wood Frame

Top Rail 1x4x3"x½" 0.04 CftVertical Rail 2x7x3"x½" 0.15 CftFillet 2(15½+15½+25+25)½x3/8 0.02 CftLeaves 2(15½+15½+19+19)½x3/8 0.03 Cft

Vertical Style

4x6'-6½"x4"x1¾ 1.27 Cft

Horizontal

Top 2x1'-10½"x3"x1¾" 0.07 CftMiddle 2x1'-10½"x1½"x1¾" 0.06 CftLock 2x1'-10½"x6"x1¾" 0.27 CftBottom 2x1'-10½"x6"x1¾" 0.27 Cft


2.40 Cft 550.00 P. Cft 1,320.00 Fitting

Hinges 4" (100mm) 6.00 Nos 4.60 Each 27.60 Tower Bolts 9" (225mm) 2.00 Nos 17.00 Each 34.00 Handles 6" 2.00 Nos 8.00 Each 16.00 Hook & Clamp 2.00 Nos 4.00 Each 8.00 Screws / Nails 2.00 Doz 3.25 P. Doz 6.50

Page 45



Wire Gauge

2x1'-2"x2'-1" 4.83 Sft4x1'-2"x1'-7" 7.33 Sft


13.98 Sft 6.00 Sft 83.88


27Labour



Contractor's Profit & Overheads 20 Percent 125.40 Total for 27 Sft. 752.40 Rate Per Sft 752.40 = 27.87

27.0Item Rates



Page 46

Item No. 12 First class deodar wood wrought joinery work inwire gauze doors and windows with 22 SWGgalvanized wire gauze 12x12 mashes per squareinch (625mm) including iron fittings complete.

a) Deodar wood framing 1¾" (45mm) thick withwire gauge fixed in position.

ii) With Springs & Spring Hinges.




Material

Deodar Wood Frame

Top Rail 1x4'x3"x½" 0.04 CftVertical Rail 2x7'x3"x½" 0.15 CftFillet 2(15½"+15½"+25"+25")½"x3/8" 0.02 CftLeaves 2(15½"+15½"+19"+19")½"x3/8" 0.03 Cft

Vertical Style

4x6'-6½"x4"x1¾" 1.27 Cft

Horizontal

Top 2x1'-10½"x3"x1¾" 0.07 CftMiddle 2x1'-10½"x1½"x1¾" 0.06 CftLock 2x1'-10½"x6"x1¾" 0.27 CftBottom 2x1'-10½"x6"x1¾" 0.27 Cft


2.40 Cft 550.00 P. Cft 1,320.00 Fitting

Hinges 4" (100mm) 6.00 Nos 4.60 Each 27.60 Tower Bolts 2.00 Nos 17.00 Each 34.00 Handles 6" (150mm) 2.00 Nos 8.00 Each 16.00 Hook & Clamp 2.00 Nos 4.00 Each 8.00 Screws / Nails 2.00 Doz 3.25 P. Doz 6.50 Spring Hinges 2.00 Nos 44.00 Each 88.00

Page 47



Wire Gauge

2x1'-2"x2'-1" 4.83 Sft4x1'-2"x1'-7" 7.33 Sft


13.98 Sft 6.00 Sft 83.88


27Labour



Contractor's Profit & Overheads 20 Percent 125.40 Total 752.40 Rate Per Sft 752.40 = 27.87

27.0Item Rates



Page 48

Item No. 12 First class deodar wood wrought joinery work inwire gauze doors and windows with 22 SWGgalvanized wire gauze 12x12 mashes per squareinch (625mm) including iron fittings complete.

b) Deodar Wood framing 1½" (40mm) thick withwire gauze fixed in position.

i) Without Springs as Spring Hinges.



Rate Analysis for 4'x6.75' = 27 Sft

Material

1st Class Deodar Wood


Horizontal

Top 2x1'-10½"x3"x1½" 0.12 CftMiddle 2x1'-10½"x1½"x1½" 0.06 CftLock 2x1'-10½"x6"x1½" 0.24 CftBottom 2x1'-10½"x6"x1½" 0.24 CftFillets 2(15½"+15½"25+25) ½x 3/8 0.02 CftFrame 4(15½"+15½"19+19) ½x 3/8 0.03 CftTop Rail 1x4x3"x1½" 0.05 CftVertical Rail 2x7x3"x1½" 0.15 Cft


2.20 Cft 550.00 P. Cft 1,210.00 Fitting

Hinges 4" (100mm) 6.00 Nos 4.60 Each 27.60 Tower Bolts 9" (228mm) 2.00 Nos 17.00 Each 34.00 Handles 6" (150mm) 2.00 Nos 8.00 Each 16.00 Hook & Clamp 2.00 Nos 4.00 Each 8.00 Screws / Nails 2.00 Doz 3.25 P. Doz 6.50

Page 49



Wire Gauge

2x1'-2"x2'-1" 4.83 Sft4x1'-2"x1'-7" 7.33 Sft


13.98 Sft 6.00 Sft 83.88


27Labour




27Item Rates



Page 50

Item No. 12 First class deodar wood wrought joinery work inwire gauze doors and windows with 22 SWGgalvanized wire gauze 144 mashes per squareinch (625mm) including iron fittings complete.

b) Deodar Wood framing 1½" (40mm) thick withwire gauze fixed in position.

ii) With Springs as Spring Hinges.



Rate Analysis for 4'x6.75' = 27 Sft

Material

1st Class Deodar Wood


Horizontal

Top 2x1'-10½"x3"x1½" 0.12 CftMiddle 2x1'-10½"x1½"x1½" 0.06 CftLock 2x1'-10½"x6"x1½" 0.24 CftBottom 2x1'-10½"x6"x1½" 0.24 CftFillets 2(15½"+15½"25+25) ½x 3/8 0.02 CftTop Rail 1x4'x3"x1½" 0.05 CftVertical Rail 2x7'x3"x1½" 0.15 Cft


2.19 Cft 550.00 P. Cft 1,204.50 Fitting

Hinges 4" (100mm) 6.00 Nos 4.60 Each 27.60 Tower Bolts 9" (228mm) 2.00 Nos 17.00 Each 34.00 Handles 6" (150mm) 2.00 Nos 8.00 Each 16.00 Hook & Clamp 2.00 Nos 4.00 Each 8.00 Screws / Nails 2.00 Doz 3.25 P. Doz 6.50 Spring 2.00 Nos 44.00 Each 88.00

Page 51



Wire Gauge

2x1'-2"x2'-1" 4.83 Sft4x1'-2"x1'-7" 7.33 Sft


13.98 Sft 6.00 Sft 83.88


27Labour




27Item Rates



Page 52

Item No. 12 c) G.I. wire gauze 22 SWG, 12x12 meshes per squareinch (256mm) fixed to chowkhat with ¾" (20mm)thick deodar wood screw and strip.




Material

Wood Work

Wood 0.25 Cft 550.00 P. Cft 137.50 Wire gauze 12.00 Sft 6.00 Sft 72.00 Nails L.S. 8.00


12Labour




12Item Rates



Page 53

Item No. 12 d) G.I. wire gauze 22 SWG, 12x12 meshes persquare inch (625mm) fixed to chowkhat with ½"(12mm) strip on separate frame of deodar wood2"x2" (50x50mm).




Material

Deodar Wood

Horizontal Rail 2x4"x2"x2" 0.22 CftVertical Rail 2x2"x2"x2" 0.11 CftStrips 2x4"x2"x½" 0.05 CftStrips 2x1'-8"x2"x½" 0.03 CftMoulding L.S. 0.06 Cft


0.56 Cft 550.00 P. Cft 308.00 Wire Gauze 144 Mesh/Sqare in CW 4x2 8.00 Sft Wastage 10% 0.80 Sft

8.80 Cft 6.00 P. Sft 52.80

Fitting

Screws above 1" long 2.00 Doz 3.25 P. Doz 6.50 Nails 0.08 Kg 43.00 P. Kg 3.58 Wooden Plugs 6.00 Nos 1.00 Each 6.00


8

Page 54



Labour




8Item Rates



Page 55

DESCRIPTION OF ITEM NO 13: Making and fixing trellis doors and windows ofdeodar wood complete.




Material

Deodar Wood 2.30 Cft 500.00 P. Cft 1,150.00 Nail 0.126 Kg. 43.00 P. Kg. 5.42 Screws above 1" long 2.50 Doz 3.25 P. Doz 8.13 Hinges 4" (100mm) 4.00 Nos 4.60 Each 18.40 Tower Bolt 9" (225mm) 2.00 Nos 17.00 Each 34.00 Hasp & Staple 1.00 No 4.00 Each 4.00


18Labour

Carpenter 1.50 No 300.00 P. Day 450.00 Skilled Cooly 1.00 No 160.00 P. Day 160.00



18Item Rates



Page 56

DESCRIPTION OF ITEM NO 14: Providing & fixing mild steel chowkhat of doors,windows, C. Window etc. including hold fast,making and threading holes for hinges etc.complete

a) M.S. angle iron 1½"x1½"x¼" (40x40x6mm)welded M.S. flat 2"x¼" (50x6mm)




Material

Structural Steel

M.S. Angle Iron 1½"x1½"x¼" (40x40x6mm)

Vertical 2x7 14 Rft

18.00 Rft

18.90 Rft

18.90 Rft @ 2.32 Lbs/Rft 43.85 LbsM.S. Flat 2"x¼" (50x6mm)

Vertical 2x7 14 Rft

18.00 Rft

18.90 Rft

18.9 @ 1.68 Lbs/ft 31.75 LbsM.S. Flat Patti 1"x1/8" (25x3mm) at

bottom.

4 @ 0.42 Lbs/ft 1.68 Lbs77.28Lb (3 5.06)Kg 24.00 P. Kg 841.44

Total 841.44 Contractor's Profit & Overheads 20 Percent 168.29 Total for 27 Sft. 1,009.73 Rate Per Sft 1009.73 = 37.40

27

Horizontal 1x4 4 Rft

Wastage 5% 0.90 Rft


Wastage 5% 0.90 Rft

Page 57



Labour

Making holes in frame for hinges 4x4 16.00 Nos 1.41 Each 22.59 Welding plate with angle iron 18.00 Nos 6.00 Each 108.00 Welding hold fast with frame 6.00 Nos 4.00 Each 24.00 Welding M.S.Steel bar with frame 2.00 Nos 4.00 Each 8.00



27Item Rates



Page 58

Item No. 14 Providing & fixing mild steel chowkhat of doors,windows, C. Window etc. including hold fast,making and threading holes for hinges etc.complete

b) M.S. Tee iron 1½"x1½"x¼" (40x40x6mm)welded with M.S. Flat ½"x¼" (12x6mm)




Material

Structural Steel

Tee Iron 1½"x1½"x¼" (40x40x6mm)

Vertical 2x7 14 Rft

18.00 Rft

18.90 Rft

18.90ft @ 2.32 Lbs/ft 44.60 LbsM.S. Flat ½"x¼" (12x6mm)

18.90ft @ 0.425 Lbs/ft 8.03 LbsM.S. Bar ½" dia 4' @ 0.67 Lbs/ft 2.68 Lbs

55.31Lb (2 5.10) Kg 24.00 P. Kg 602.40


27


Wastage 5% 0.90 Rft

Page 59



Labour

Making holes in frame for hinges 4x4 16.00 Nos 1.41 Each 22.59 Welding plate with angle iron 18.00 Nos 6.00 Each 108.00 Welding hold fast with frame 6.00 Nos 4.00 Each 24.00 Welding M.S.Steel bar with frame 2.00 Nos 4.00 Each 8.00



27Item Rates



Page 60

Item No. 15 Providing and fixing M.S. Sheet hollow pressedframe of doors, windows, CW, etc. (Chowkhatonly) of 20 SWG welded with M.S. flat6"x1½"x1/8" (150x40x3mm) M.S. hold fast 9"x1"x1/8" (225x25x3mm) welded/ screwed 4"(100mm) long iron hinges including fittingchowkhat with cement sand mortar 1:8 andembedding hold fast in cement concrete 1:2:4,complete in all respects.

a) Single Rebate.




Material

M.S. Sheet 20 Swg 15"(375mm) wide

18' long x15/12 (5.486x0.380m) 22.50 Kg.Wastage 10% 2.25 Kg.

24.75 Kg.SAY 25.00 Kg. Or 29.00 Kg. 493.58

M.S. Flat 6"x¼"x1/8" (150x6x3mm) 17.02 Kg3.5 Rft @ 0.531 Lbs/Rft 1.86 LbsM.S. Flat hold fast 9"x1"x1/8" (225x25x3mm)

4.5 Rft @ 0.425 Lbs/Rft 1.91 Lbs3.77Lb (1 .71) Kg 22.00 P. Kg 37.62

Fitting

Hinges 4" (100mm) 6.00 Nos 4.60 Each 27.60 Screws 3.00 Doz 3.25 P. Doz 9.75 Nails 0.28 Kg. 43.00 P. Kg. 12.04 Welding Charges 60.00 Cement sand mortar ratio 1:8 for

filling hollow space 18'x4'/12"x3/12

including wastage (0.057m³)

(5.486x0.100x0.075m) 2.00 Cft

Page 61



Material

Cement 0.20 Bag 230.00 Each 46.00 Sand 2.00 Cft 3.50 P. Cft 7.00 Cement Concrete 1:2:4 for fixing hold fast

Cement 0.08 Bag 230.00 Bag 18.40 Sand 0.20 Cft. 350.00 % Cft. 0.70 Bajri 0.40 Cft. 1850.00 % Cft. 7.40


28Labour

Moulder/ Black Smith 0.50 No 300.00 P. Day 150.00 Cooly 0.50 No 140.00 P. Day 70.00 SKilled Cooly (for Mortor Filling in the

hallow space) 0.50 No 160.00 P. Day 80.00



28Item Rates



Page 62

Item No. 15 Providing and fixing M.S. Sheet hollow pressedframe of doors, windows, C. window, etc. (Chowkhat only) of 20 SWG welded with M.S. flat6"x1¼"x1/8" (150x32x3mm) M.S. hold fast 9"x1"x1/8" (225x25x3mm) welded/ screwed 4"(100mm) long iron hinges including fittingchowkhat with cement sand mortar 1:8 andembedding hold fast in cement concrete 1:2:4,complete in all respects.

b) Double Rebate.




Material

M.S. Sheet 20SWG 17"(432mm) wide

19' longx18x18/17(5.486x0.432)= 25.50 Sft

28.05 Sft 19.10 Kg 29.00 P. Kg 553.90

M.S. Flat 7.5x1¼"x1/8(2.30x0.032x0.003)=7 No.

4.50 Rft @ 0.531 Lbs/Rft 2.39 LbsM.S. Flat hold fast 9"x1"x1/8"= 6 No

4.50 Rft @ 0.425 Lbs/Rft 1.91 Lbs4.30Lbs (1 .95) Kg 22.00 P. Kg 42.90

Fitting

Hinges 4" (100mm) 6.00 Nos 4.60 Each 27.60 Screws 3.00 Doz 3.25 P. Doz 9.75 Nails 0.28 Kg. 43.00 P. Kg. 12.04 Welding Charges 80.00 Cement sand mortar ratio 1:8 for

filling hollow space

18"x11/24x4/12 = (5.486x0.275x0.1m) 2.75 Cft

Wastage 10% 2.55 Sft

Page 63



Material

Cement 0.28 Bag 230.00 Each 63.25 Sand 2.75 Cft 3.50 P. Cft 9.63 Cement Concrete 1:2:4 for (fixing

hold fast) Cement 0.08 Bag 230.00 Bag 18.40 Sand 0.20 Cft. 350.00 % Cft. 0.70 Bajri 0.40 Cft. 1850.00 % Cft. 7.40


28

Moulder/ Black Smith 0.75 No 300.00 P. Day 225.00 Cooly 0.50 No 140.00 P. Day 70.00 SKilled Cooly (for Mortor Filling in the

hollow space) 0.50 No 160.00 P. Day 80.00



28Item Rates



Page 64

DESCRIPTION OF ITEM NO 16: Extra for providing & fixing iron double springhinges, with brass fittings (it shall include brassfinger plate, 6" tower bolts)



Rate Analysis for = 21 Sft

Material

4" (100mm) double section spring

hinges iron. 3.00 Nos 50.00 Each 150.00 Brass finger plate 2.00 Nos 30.00 Each 60.00 6" (150mm) brass tower bolt 1.00 No 30.00 Each 30.00 Brass screws 1½" (40mm) 2.00 Doz 8.00 P. Doz 16.00 Brass Screw 1" (25mm) 2.50 Doz 3.25 P. Doz 8.13

264.13

Deduct Cost of Iron Fittings

5" (125mm) Butt Hinges 4.00 Nos 5.50 Each 22.00 9" (225mm) Tower Bolts 2.00 Nos 17.00 Each 34.00 6" (150mm) Handle 2.00 Nos 8.00 Each 16.00 Hinges Chocks 2.00 Nos 2.00 Each 4.00 Door Stops 2.00 Nos 12.00 Each 24.00 Screws 1½" 3.00 Doz 3.25 P. Doz 9.75 Screws 1" 3.00 Doz 1.68 P. Doz 5.04

114.79

Total 262.50-112.96 = 149.34 Contractor's Profit & Overheads 20 Percent 29.87 Total for 21 Sft. 179.20 Rate Per Sft 179.20 = 8.53

21

Page 65



Labour




21

Item Rates



Page 66

DESCRIPTION OF ITEM NO 17: Providing and fixing brass spring hinges, to wiregauzed doors.

Detail Unit Rate (British System)per Each


Material

Brass spring hinges Complete with

screws 1 No 60.00 Each 60.00


Labour




Item Rates

Labour Rate for Each Rs. 30.36 Say 30.35

Composite Rate for Each Rs. 102.36 Say 102.35

Page 67

DESCRIPTION OF ITEM NO 18: Providing and fixing sliding bolt to doors.

i) Iron sliding bolt 10" (250mm) long.



Rate Analysis for = 16 Each

Material

Sliding bolt 10"(250mm) long complete with

screws & nuts. 16 Nos 35.00 Each 560.00


Labour




Item Rates

Labour Rate for Each Rs. 501.60 31.35 Say 31.35 16

Composite Rate for Each Rs. 1173.60 73.35 Say 73.35 16

Page 68

Item No. 18 Providing and fixing sliding bolt to doors.

ii) Iron sliding bolt 12" (300mm) long.




Material

Sliding bolt 12" (300mm) long complete

with screws with & nuts. 16 Nos 45.00 Each 720.00


Labour




Item Rates



Page 69


iii) Brass sliding bolt 10" (250mm) long.



Rate Anaylysis for = 16 Each

Material

Brass sliding bolt 10" (250mm) long

complete with screws & nuts. 16 Nos 75.00 Each 1,200.00

Total 1,200.00 Contractor's Profit & Overheads 20 Percent 240.00 Total 1,440.00

Labour




Item Rates



Page 70


iv) Brass sliding bolt 12" (300mm) long.




Material

Brass sliding bolt 12" (300mm) long

complete with screws & nuts. 16 Nos 85.00 Each 1,360.00


Labour




Item Rates



Page 71

DESCRIPTION OF ITEM NO 19: Extra for brass fittings to doors and windows,except for hinges, which shall be of iron.

i) Deodar wood panelled or panelled and glazed orfully glazed.




9" (225mm) Tower bolt 3.00 Nos 27.00 Each 81.00 6" (150mm) Handles 3.00 Nos 40.00 Each 120.00 2" (50mm) Butt hinges 2.00 Nos 5.00 Each 10.00 Screws 1" 3.50 Doz 3.25 P. Doz 11.38

222.38 Deduct Cost of Iron Fittings

9" (225mm) Tower Bolts 3.00 Nos 17.00 Each 51.00 6" (150mm) Handle 3.00 Nos 9.60 Each 28.80 2" (50mm) butt hinges 2.00 Nos 6.00 Each 12.00 Screws above 1" long 3.50 Doz 3.25 P. Doz 11.38

103.18


28

Labour



28

Labour Rate Per Sft Rs. 0.87 Say 0.85 Labour Rate Per Sqm Rs. 9.33 Say 9.35 Composite Rate Per Sft Rs. 5.98 Say 6.00 Composite Rate Per Sqm Rs. 64.30 Say 64.30

Material (Brass Fittings)

Page 72

Item No. 19 Extra for brass fittings to doors and windows,except for hinges, which shall be of iron.

ii) Deodar wood wire gauzed shutters.




9" (225mm) Tower balt 2.00 Nos 27.00 Each 54.00 6" (150mm) Handles 2.00 Nos 40.00 Each 80.00 2" (50mm) butt hinges 2.00 Nos 5.00 Each 10.00 Screws 1" 3.50 Doz 3.25 P. Doz 11.38

155.38 Deduct Cost of Iron Fittings

9" (225mm) Tower Bolts 2.00 Nos 17.00 Each 34.00 8" (200mm) Handle 2.00 Nos 9.60 Each 19.20

### 2" (50mm) Butt hinges 2.00 Nos 6.00 Each 12.00 Screws 1" 3.00 Doz 3.25 P. Doz 9.75

74.95


28Labour



28Item Rates



Material (Brass Fittings)

Page 73

DESCRIPTION OF ITEM NO 20: Extra for providing and fixing, approved qualityrim lock adjustable over the style surface.



Material

Rim lock complete with screws 1.00 No 140.00 Each 140.00 Deduct cost of handle 2.00 Nos 8.00 Each 16.00


Labour




Item Rates



Page 74

DESCRIPTION OF ITEM NO 21: Providing and fixing approved quality morticelock.



Material

Mortice lock compelte with screws 1.00 No 175.00 Each 175.00 Deduct cost of handles 2.00 Nos 8.00 Each 16.00


Labour




Item Rates Labour Rate for Each Rs. 134.20 Say 134.20


—

Page 75

DESCRIPTION OF ITEM NO 22: Providing and fixing expanded metal ½" to ¾"(12mm to 20mm) mesh 16 gauge.

a) Fixed to chowkhat with 1" (25mm) thick deodarwood strip and screws etc.




Material

Deodar Wood

Strips vertical 2x2x½"x3/12" 0.08 CftHorizontal 2x3-10/12x½"x3/12" 0.16 Cft


0.29 CftSAY 0.30 Cft 550.00 P. Cft 165.00

Expanded metal 1x4x2 8.00 SftWastage 10% 0.80 Sft

8.80 Sft 6.67 Sft 58.70 Nails / Screws 2.00 Doz 3.25 P. Doz 6.50


8Labour



8Item Rates



Page 76

Item No. 22 Providing and fixing expanded metal ½" to ¾"(12mm to 20mm) mesh 16 gauge.

b) Fixed with 1" (25mm) cover moulding & screwsincluding deodar wood frame 2"x2" (50x50mm).




Material

Deodar Wood Frame

2 No 4'x2/12"x212" 0.23 Cft2 No 3'x2/12"x212" 0.17 CftMoulding 1x13 2/3'x1/12x2/12 0.20 Cft


0.72 Cft 550.00 P. Cft 396.00 Expended metal 1x4x3 12.00 SftWastage 10% 1.20 Sft

13.20 Sft 6.67 Sft 88.04 Nails / Screws 2.00 Doz 3.25 P. Doz 6.50


12Labour



12Item Rates



Page 77

DESCRIPTION OF ITEM NO 23: a) Providing and fixing deodar wood almirah 9" to 12" (225 to 300mm) depth, including boxing

with back shelves, shutter and brass fittings etc.complete.




Material

Deodar Wood

Sides 2x1'x5'x1/12" 0.84 CftBack 1x3'x5'x¾" 0.94 CftTop & Bottom 2x3'x1'x1/12" 0.50 CftPlank 3x3'x1'x1/12" 0.75 CftShutters 2x1.5'x5'x1/12" 1.25 Cft


4.71 Cft 550.00 P. Cft 2,590.50

Fittings Brass

Hings 3" (75mm) 6.00 Nos 3.75 Each 22.50 Hasp & Staple (Brass) 1.00 No 12.00 Each 12.00 Brass Handle 6" (150mm) 2.00 Nos 70.00 Each 140.00 Wooden Plugs 10.00 Nos 1.00 Each 10.00 Nails / Screws L.S. 19.00 Bitumen 1.43 Kg. 14.00 P. Kg. 20.02


15

Page 78



Labour




15

Item Rates



Page 79

Item No. 23 b) Providing and fixing deodar wood almirah 9" to12" (225 to 300mm) depth, with shelves shutterand brass fittings, etc. without boxing & back complete.




Material

Deodar Wood

Plank 3x10x3'x1'x1/12" 0.75 CftShutters 2x1.5'x5'x1/12" 1.25 Cft


2.20 Cft 500.00 P. Cft 1,100.00 Fittings Brass

Hings 3" (75mm) 6.00 Nos 3.75 Each 22.50 Hasp & Staple (Brass) 1.00 No 12.00 Each 12.00 Brass Handle 6" (150mm) 2.00 Nos 70.00 Each 140.00 Wooden Plugs 6.00 Nos 1.00 Each 6.00 Nails / Screws L.S. 12.00


15Labour

Carpenter 1.75 Nos 300.00 P. Day 525.00 Skilled Cooly 0.50 No 160.00 P. Day 80.00


15Item Rates



Page 80

Item No. 24 Providing and fixing class room almirahconsisting of 1" (25mm) thick solid flush shutterwith deodar wood lipping ¼" (6mm) thick alround(sterling made) fixed in deodar wood frame 3"x1"(75x25mm) I/C full hinges C.P. fittings withR.C.C. (1:1-½:3) shelves 1-½" (40mm) thick I/C 3coats of painting.



Rate Analysis for 4.5' x 3.5' = 15.75 Sft

Material

Precast reinforced cement concrete

(1:1-½"3)

Shelves 2x3-¼x1-1/8x1/8 0.91 Cft 83.60 P. Cft 76.07 Steel ¼" (12mm) dia

4x3.25 (4x0.975=3.900Rm) 13.00 Rft

18.63 Rft

19.56 Rft 1.48 Kg 24.00 Kg 35.52 @ 0.167 Lbs/Rft

Deodar wood frame I/C sawing

2x4'½x¼'x1/12' 0.19 Cft2x3'x½x¼'x1/12' 0.15 Cft


0.46 Cft 550.00 P. Cft 253.00 1" (25mm) thick solid flush shutter

(Sterling made)

1x3'x4' (1x0.900x1.200 = 1.080) 12.00 SftWastage 5% 0.60 Sft

12.60 Sft 72.00 Sft 907.20 Deodar wood lipping 6mm thick

(Sterling made)

2x4' (2x1.200 = 2.400) 8.00 Rft2x2x-½' (2x2x0.450 = 1.800) 6.00 Rft

14.00 Rft 5.60 Rft 78.40

5x1 1'/6(5x0.375=1.875Rm) 5.63 Rft

Wastage 5% 0.93 Rft

Page 81



Full hinges 1" (25mm) I/C screws 2x4 8.00 Nos 20.00 Each 160.00 C.P. dasti I/C screws 2.00 Nos 8.00 Each 16.00 Khunda chapks (Best quality) I/C screws 1.00 No 12.00 Each 12.00 Rawal plug 1-½" long 12.00 Nos 3.00 Each 36.00 Screws 1-½" long 1.00 Doz 3.25 P. Doz 3.25 Glue 0.20 Kg. 80.00 P.Kg. 16.00 Painting 3 coats 0.428 Gln. 450.00 P. Gln. 192.60

Total 1,786.04 Contractor's Profit & Overheads 20 Percent 357.21 Total for 15.75 Sft. 2,143.25 Rate Per Sft 2143.25 = 136.08

15.75 Labour

For bringing the leaves to proper size

fixing deodar wood lipping with glue

and nail making/ fixing deodar wood

frame & fixing at site with rawal plug &

screws.

Carpenter 1.00 No 300.00 P. Day 300.00 Helper 1.00 No 75.00 P. Day 75.00


Contractor's Profit & Overheads 20 Percent 82.50 Total for 15.75 Sft. 495.00 Rate Per Sft 495.00 = 31.43

15.75

Item Rates



Page 82

DESCRIPTION OF ITEM NO 25: Providing and fixing wooden box type ward robe22" (550mm) deep including ¾" (20mm) thickboxing and shelves, hanger rods, hard board backdrawers, brass fitting locking arrangements,handles internal bolts shoe rods, etc. includingthree coats of enamel paints.

i) Partal wood boxing and deodar wood shelves andleaves etc.




Material

Partal Wood

Boxing

Side 2x6-1/3x22/12x3/48 1.45 CftTop & Bottom 2x4 22/12x3/48 0.92 CftFoot Rack 1x3-7/8x22/12x3/48 0.44 CftVertical Style 1x5x22/12x3/48 0.57 CftStrips 6x22/12x1/8x3/48 0.09 CftBack 2x1½x22/12x3/48 0.34 Cft


4.38 Cft 350.00 P. Cft 1,533.00 Shutters Deodar Wood

1x1-2/3x6½x1/12 0.91 Cft1x2-1/3x6½x1/12 1.26 Cft


2.50 Cft 500.00 P. Cft 1,250.00 Hard Board

4x6½ 26.00 SftWastage 10% 2.60 Sft

28.60 Sft 3.50 Sft 100.10 Sawing Charges

6.88x10 68.80 Sft 0.80 Sft 55.04

Page 83



Fittings

Hings 4" (100mm) 6.00 Nos 4.60 Each 27.60 Handle 2.00 Nos 8.00 Each 16.00 Tie rod welding fixing arragement 2.25 Nos 28.00 Each 63.00 Hanger hook including pull out rod 2.00 Nos 8.00 Each 16.00 Tower bolt 4" (100mm) 1.00 Nos 7.00 Each 7.00 Bitumen Painting 1.43 Kg. 14.00 Each 20.02


26Labour

Carpenters 4.00 No 300.00 P. Day 1,200.00 Skilled Cooly 2.00 No 160.00 P. Day 320.00



26

Item Rates



Page 84

Item No. 25 Providing and fixing wooden box type ward robe22" (550mm) deep including ¾" (20mm) thickboxing and shelves, hanger rods, hard board backdrawers, brass fitting locking arrangements,handles internal bolts shoe rods, etc. includingthree coats of enamel paints.

ii) Deodar wood boxing and shelves & leaves etc.




Material

Deodar Wood

Boxing

Vetical Side 2x8x22/12x3/48 1.83 CftControl Side 1x7-7/8x22/12x3/48 0.90 CftHorizontal T&B 2x4 11/12x22/12x3/48 1.13 CftShelves 5x2x22/12x3/48 1.15 CftVertical 1x1½x22/12x3/48 0.17 CftShoes 2x½x1/5x1/12 0.02 CftSutter 2x2 3/5x8x1/12 3.47 CftStrips 2x8x1/12x1/24 0.06 CftStrips 2x5x1/12x1/24 0.03 Cft


10.07 Cft 500.00 P. Cft 5,035.00 Hard Wood Board

Back 5x8 40.00 SftWastage 10% 4.00 Sft

44.00 Sft 3.50 Sft 154.00 Sawing Charges :

10.20x10 102.00 Sft 0.80 Sft 81.60

Bitumen Painting 2 Coat 1.43 Kg. 14.00 Each 20.02 Painting 3 Coats 0.27 Kg. 450.00 P. Gln. 121.50

Page 85



Fittings

Hings 4" (100mm) 6.00 Nos 4.50 Each 27.00 Handle 2.00 Nos 8.00 Each 16.00 Tie rod welding fixing arragement 8.00 Hanger hook including full out rod 2.00 Nos 8.00 Each 16.00 Screws 4.00 Doz 3.25 P. Doz 13.00 Tower bolt 4" (100mm) 1.00 Nos 7.00 Each 7.00 Nail 0.19 Kg 43.00 P. Kg 8.17 Locking arrangement 1.00 Nos 55.00 Each 55.00

Total 5,562.29 Contractor's Profit & Overheads 20 Percent 1,112.46 Total for 40 Sft. 6,674.75 Rate Per Sft 6674.75 = 166.87

40

Carpenters 6.00 Nos 300.00 P. Day 1,800.00 Skilled Cooly 2.00 Nos 160.00 P. Day 320.00 Painter 1.00 Nos 170.00 P. Day 170.00



40

Item Rates



Page 86

Item No. 26 Providing/ fixing ward robe 22" (550mm) deep consisting of RCC shelves 1-½" (40mm) thick I/c ½"

(12mm) thick vin board boxing and back (one sideply) vin board shutter ¾" (20mm) thick I/c Deodarwood lipping ¼"(6mm) on all edges fixes I/c deodarwood frame 3"x1" with hanger rod in centre portiondrawers at bottom and openable shutter on upperportion I/c full hinges C.P. fitting and painting 3coats.



Rate Analysis for 7.5' x 7' = 52.50 Sft

Material

RCC shelves (Precast RCC 1x1-½x3 top

and bottom

2x7-¼x2x1/8 3.62 Cft4x2-½x2x1/8 2.50 Cft

6.12 Cft 79.92 P. Cft 489.10 Steel Reinforcement

6.12x1.50 9.18 Kg 17.00 P. Kg 156.06

½" thick vin board (one side ply) for

boxing.

Top/ Bottom 6x2x2-¼x1-7/8 50.63 SftSide 6x2x1-1/8x1-7/8 25.31 SftBack 6x2-¼x1-1/8 15.18 SftTop/ Bottom 3x2x2-¼x1-7/8 25.31 SftVertical 6x2x1-¼x1-7/8 28.12 SftSide 2x4x1-7/8 15.00 SftBack 3x2x2-¼x1-¼ 16.87 SftBack 1x2-¼x4 9.00 Sft


203.96 Sft 21.10 Sft 4,303.56 Vin board ¾" thick on both side ply

6x2-¼x1-¼ 16.87 Sft3x4x2-¼ 27.00 Sft


48.25 Sft 24.00 Sft 1,158.00

Page 87



Deodar Wood

Frame 4x7x3/12x1/12 0.58 CftFrame 4x7-½x3/12x1/12 0.62 CftLipping 3x6x2-¼x1/16x1/24 0.11 CftLipping 6x2x1-1/8x1/16x1/24 0.04 CftLipping 2x3x4x1/16x1/24 0.06 Cft

For drawers side supporting

3x2x1-7/8x1/12x1/24 0.04 CftDrawers 3x2-¼x1-1/8x1/24 0.32 CftSide 2x3x1-7/8x1-1/8x1/24 0.53 Cft


3.11 Cft 550.00 P. Cft 1,710.50 Hard Board for drawers

3x2-¼x1-7/8(3x0.686x0.573=1.179 12.65 SftWastage 10% 1.26 Sft

13.91 Sft 3.50 Sft 48.69 Full hinges ¾" (20mm) wide (Imported)

3x4 (3x1.219 = 3.657) 12.00 Rft3x1-1/8 (3x0.343 = 1.029) 3.37 Rft

15.37 RftWastage 5% (Add Wastage 5%) 0.76 Rft

16.13 Rft 7.20 Rft 116.14

C.P. Handle 9.00 Nos 8.00 Each 72.00 Catcher (Germany) 9.00 Nos 6.40 Each 57.60 China Lock (Glone) 3.00 Nos 24.00 Each 72.00 Rawal Plug 1½" (40mm) 30.00 Nos 0.30 Each 9.00 Screws above 1" long 2.50 Doz 3.25 P. Doz 8.13 C.P. Hanger rod with 2 hooks 1.00 No 96.00 Each 96.00 C.P. Hooks 2.00 Nos 8.00 Each 16.00

Page 88



Glue 2.00 Kg 80.00 P. Kg 160.00 Nail L.S. 32.00 Painting 4(7½ x 7) 2.86 Gln. 17.00 P. Gln. 48.62

Total 8,553.39 Contractor's Profit & Overheads 20 Percent 1,710.68 Total for 52.50 Sft. 10,264.07 Rate Per Sft 10264.07 = 195.51

52.50Labour

Labour for making ward robe complete 52.50 Sft 29.00 Sft 1,522.50



52.50

Item Rates



Page 89

DESCRIPTION OF ITEM NO 27: Providing and fixing chowkhat for doors, window,& C. Windows including hold fast etc.

a) Teak Wood.




Material

Teak Wood

Top Rail 1x4¾x3"x4½" 0.45 CftVertical Rail 2x7x3"x4½" 1.33 Cft


2.00 Cft 1400.00 P. Cft 2,800.00 Iron hold fast 6.00 Nos 12.00 Each 72.00


27Labour




27

Item Rates



Page 90

Item No. 27 Providing and fixing chowkhat for doors windows& C. Windows including hold fast etc.

b) Deodar Wood.




Material

For Frame

Top Rail 1x4¾'x3"x4½" 0.45 CftVertical Rail 2x7'x3"x4½" 1.33 Cft


2.05 Cft 550.00 P. Cft 1,127.50 Iron hold fast 6.00 Nos 12.00 Each 72.00


27Labour




27

Item Rates



Page 91

Item No. 27 Providing and fixing chowkhat for doors, windows,& C. Windows including hold fast etc.

c) Shisham Wood.




Material

Shishim Wood

Top Rail 1x4¾'x3"x4½" 0.45 CftVertical Rail 2x7'x3"x4½" 1.33 Cft


2.05 Cft 300.00 P. Cft 614.10 Iron hold fast 6.00 Nos 12.00 Each 72.00


27Labour




27

Item Rates



Page 92

DESCRIPTION OF ITEM NO 28:Making & fixing deodar wood planking in eaveboards etc. planed on both side related & fixedincluding nails & screws, bolt & brackets.

a) 1" (25mm) Thick.




Material

Deodar Wood 9.50 Cft 500.00 P. Cft 4,750.00 Nail & Screws bolt and brackets L.S. 24.00


100Labour

Carpenters 4.00 Nos 300.00 P. Day 1,200.00 Skilled Cooly 1.00 No 160.00 P. Day 160.00



100

Item Rates



Page 93

Item No. 28 Making & fixing deodar wood planking in eaveboards etc. planed on both side related & fixedincluding nails & screws, bolt & brackets.

b) ¾" (20mm) Thick.




Material

Deodar Wood 7.12 Cft 500.00 P. Cft 3,560.00 Asscessories for fixing L.S. 24.00


100Labour




100

Item Rates



Page 94

Item No. 28 Making & fixing deodar wood planking in eaveboards etc. planed on both side related & fixedincluding nails & screws, bolt & brackets.

c) ½" (12mm) Thick




Material



100Labour




100

Item Rates



Page 95

DESCRIPTION OF ITEM NO 29:Making and fixing deodar wood shelves,including brackets.

i) 1" (25mm) Thick.




Material

Deodar Wood 9.50 Cft 500.00 P. Cft 4,750.00 Accessoires for fitting L.S. 24.00


100Labour




100

Item Rates



Page 96

Item No. 29 Making and fixing deodar wood shelves,including brackets.

ii) 1½" (40mm) Thick




Material



100

Labour




100

Item Rates



Page 97

Item No. 29 Making and fixing deodar wood shelves,including brackets.

iii) 2" (50mm) Thick.




Material



100Labour




100

Item Rates



Page 98

DESCRIPTION OF ITEM NO 30: a) Making and fixing cleats for doors and windows including hinges and screws.



Rate Analysis for = 10 Nos

Material

Hinges 2" (50mm) 10.00 Nos 2.50 Each 25.00 Screws 1" (25mm) 3.50 Doz 3.25 P. Doz 11.38 Deodar wood 0.21 Cft 500.00 P. Cft 105.00


Labour




Item Rates



Page 99

Item No. 30 b) Making and fixing cleats with brass hooks for roofventilator.



Material

Brass hooks 1 No 4.00 Each 4.00 Deodar Wood 0.01 Cft 500.00 P. Cft 5.00 Screws/ Nails 2.00 Nos 3.25 P. Doz 0.44


Labour for 1.25 Nos.




Item Rates

Labour Rate for Each Rs. 30.36 24.29 Say 24.30 1.25


Page 100

Item No. 30 c) Providing and fixing door stops of 1½" (40mm)dia rubber block.



Rate Analysis for = 30 Nos

Material

Door rubber stopper 30.00 Nos 2.80 Each 84.00 Gutty 30.00 Nos 0.25 Each 7.50 Screws 2.50 Doz 3.25 P. Doz 8.13


Labour

Carpenter 0.25 No 300.00 P. Day 75.00



Item Rates



Page 101

Item No. 30 d) Providing and fixing G.I. hook with clamps fordoors.



Material

G.I. Hook 1.00 No 2.00 Each 2.00 Gutty 1.00 No 0.25 Each 0.25


Labour (Labour for 30 No.)




Item Rates



Page 102

DESCRIPTION OF ITEM:

Item No. 31 Hard wood railing of any shape and designincluding bends and corners fixed in positionincluding polishing complete as directed by Engineer Incharge.

a) Shisham Wood.

Detail Unit Rate (British System) per Rft


Rate Analysis for = 12 Rft

Material

Shisham wood 0.90 Cft 300.00 P. Cft 270.00 Sand paper 3.00 Nos 6.00 Each 18.00 Polishing material 0.075 Kg. 160.00 P. Kg. 12.00

Total 300.00 Contractor's Profit & Overheads 20 Percent 60.00 Total 12 Rft. 360.00 Rate Per Rft 360.00 = 30.00

12Labour

Carpenters 1.50 No 300.00 P. Day 450.00 Skilled Cooly 0.75 No 160.00 P. Day 120.00 Polisher 0.50 No 170.00 P. Day 85.00


Contractor's Profit & Overheads 20 Percent 144.10 Total for 12 Rft. 864.60 Rate Per Rft 864.60 = 72.05

12Item Rates

Labour Rate Per Rft Rs. 72.05 Say 72.05 Labour Rate Per Rm Rs. 236.32 Say 236.30

Composite Rate Per Rft Rs. 102.05 Say 102.05 Composite Rate Per Rm Rs. 334.72 Say 334.70

Page 103

Item No. 31 Hard wood railing of any shape and designincluding bends and corners fixed in positionincluding polishing complete as directed by Engineer Incharge.

b) Teak Wood.




Material

Teak wood 0.90 Cft 1400.00 P. Cft 1,260.00 Sand paper 3.00 Nos 6.00 Each 18.00 Polishing material 0.075 Kg. 160.00 P. Kg. 12.00

Total 1,290.00 Contractor's Profit & Overheads 20 Percent 258.00 Total for 10 Rft. 1,548.00 Rate Per Rft 1548.00 = 154.80

10Labour

Carpenters 1.00 No. 300.00 P. Day 300.00 Skilled Cooly 0.50 No 160.00 P. Day 80.00 Polisher 0.20 No 170.00 P. Day 34.00



10

Item Rates



Page 104

DESCRIPTION OF ITEM NO 32:Deodar wood dado or Picture Rail 3"x1½"(50x40mm) as per approved design includingmoulding and fixed in place, cost of screws nails,plugs and painting complete.




Material

Deodar wood 0.60 Cft 500.00 P. Cft 300.00 Sand paper 1.00 Sht 6.00 P. Sht 6.00 Rawal Plugs 0.50 No 0.30 Each 0.15 Screws 0.50 Doz 3.25 P. Doz 1.63 Polishing material 0.038 Kg. 160.00 P. Kg. 6.00

Total 313.78 Contractor's Profit & Overheads 20 Percent 62.76 Total for 10 Rft. 376.53 Rate Per Rft 376.53 = 37.65

10Labour

Carpenter 0.50 No 300.00 P. Day 150.00 Skilled Cooly 0.25 No 160.00 P. Day 40.00 Polisher 0.10 No 170.00 P. Day 17.00



10

Item Rates



Page 105

DESCRIPTION OF ITEM NO 33: Sawing wood by hand.

a) Soft wood (Deodar Kail, Chir)

Detail Unit Rate (British System) per 100 Sft



Labour

Sawyer 1.50 Nos 170.00 P. Day 255.00 Skilled Cooly 1.50 Nos 160.00 P. Day 240.00



Item Rates

Labour Rate Per 100 Sft Rs. 653.40 x 100 =154.28 Say 217.80 300

Labour Rate Per Sqm Rs. 23.44 Say 23.45

Page 106

Item No. 33: Sawing wood by hand.

b) Hard Wood (Shisham, Kikar, Sal or Teak)


Qty RatePer Unit Amount


Labour



Contractor's Profit & Overheads 20 Percent 217.80 Total 1,306.80

Item Rates

Labour Rate Per 100 Sft Rs. 1306.80 x 100=205.7 Say 290.40 450


Page 107

DESCRIPTION OF ITEM NO 34: Sawing wood by machine.

a) Soft Wood.




Labour

Sawyer 1.00 No 170.00 P. Day 170.00 Skilled Cooly 0.77 No 160.00 P. Day 123.20



Item Rates

Labour Rate Per 100 Sft Rs. 387.02 x 100=94.97 Say 129.01 300


Page 108

Item No. 34 Sawing wood by machine.

b) Hard Wood.




Labour




Item Rates

Labour Rate Per 100 Sft Rs. 581.59 x 100=142.62 Say 193.85 300 193.86


Page 109

DESCRIPTION OF ITEM NO 35: Making and fixing sun shade of deodar woodincluding fixing brackets.




Material

Deodar Wood

Horizontal Planks

Top 4x5x1/3x1/24 0.28 CftVertical 2x1¾x1/6x5/68 0.06 CftSupports along sun shade 0.04 Cft2x3/2x1/8x5/48

Suporting brackets 2x1x1/8x5/48 0.03 CftFront ears hard strips 1x5x1/4x1/12 0.10 Cft


0.56 Cft 500.00 P. Cft 280.00 Sawing & Nails L.S. 8.00


5Labour

Carpenter 0.25 No 300.00 P. Day 75.00 Cooly Skilled 0.10 No 160.00 P. Day 16.00



5Item Rates



Page 110

DESCRIPTION OF ITEM NO 36: Making and fixing 1" (25mm) thick Kail or Chirwooden notice board with frame.




Material

Kail or Chir Wood 1.64 Cft 350.00 P. Cft 574.00 Nails 0.093 Kg. 43.00 P. Kg. 4.00 Glue 0.075 Kg. 80.00 P. Kg. 6.00 Iron Hook 1.00 No. 2.00 Each 2.00


18Labour




18

Item Rates



Page 111

DESCRIPTION OF ITEM NO 37: Making deodar Punkha Pole = 10'x6"x6"(3.047x0.150x0.150M).

Detail Unit Rate (British System) per Each


Material

Deodar wood 2.50 Cft 500.00 P. Cft 1,250.00 Hooks 2.00 Doz 12.00 P. Doz 24.00


Labour




Item Rates


Composite Rate for Each Rs. 1629.12 Say 1,629.10

Page 112

DESCRIPTION OF ITEM NO 38: Dismantling and refixing eaves boards.




Labour




Item Rates

Labour Rate Per Rft Rs. 501.60 7.17 Say 7.15 70

Labour Rate Per Rm Rs. 23.51 Say 23.50

Page 113

DESCRIPTION OF ITEM NO 39: Making wooden stair cases complete 2' to 3' (600 to915mm) wide frame 1½" (40mm) thick planks ofdeodar wood, including hand rails.




Material

Deodar Wood

Detail of Deodar Wood

2x5/6x15x1/8 3.12 CftStops 14x2½x1/8x5/6 3.65 Cftand Rail 2x15x¼x¼ 1.88 Cftand Rail 2x4x3x¼x¼ 1.50 Cft

10.15 CftWastage L. S. 0.35 Cft

10.50 Cft 500.00 P. Cft 5,250.00 Nails 0.93 Kg 28.00 P. Kg 26.04 Bolts ½" to 3" (12 to 76mm) long 5.880 Kg. 45.00 P. Kg 264.60 Steel rods dia ¾ 3x3'-6" = 10.5 Rft 15.3Lb (7 .5Kg) 17.00 P. Kg 127.50 Washers 12.00 Nos 0.50 Each 6.00

Total 5,674.14 Contractor's Profit & Overheads 20 Percent 1,134.83 Total for 15 Rft. 6,808.97 Rate Per Rft 6808.97 = 453.93

15Labour

Carpenter 2.00 Nos 300.00 P. Day 600.00 Blacksmith 0.50 No 170.00 P. Day 85.00 Hammer-man 0.50 No 75.00 P. Day 37.50 Cooly Skilled 2.00 Nos 160.00 P. Day 320.00

Total 1,042.50 Sundries 10 Percent 104.25 Total 1,146.75 Contractor's Profit & Overheads 20 Percent 229.35 Total for 15 Rft. 1,376.10 Rate Per Rft 1376.10 = 91.74

15Item Rates


Composite Rate Per Rft Rs. 545.67 Say 545.65 Composite Rate Per Rm Rs. 1,789.80 Say 1,789.80

Page 114

DESCRIPTION OF ITEM NO 40: Providing and fixing partition including frame work.a - (i) Sheets on one side of frame work.

Hard Board.




Material

Hard Board Sheet

1x8x16 128.00 SftWastage 5% 6.40 Sft

134.40 Sft 3.50 Sft 470.40 Deodar Wood & other Accessories

Frame work 2x16x3"x2½" 1.67 CftHorizontal post 1x16x2"x2½" 0.56 Cft 2x8x3"x2½" 0.83 Cft 3x8x2"x2½" 0.83 Cft


4.47 Cft 500.00 P. Cft 2,235.00 Nails of all sorts 0.47 Kg 43.00 P. Kg 20.21 Screws 2.00 Doz 3.25 P. Doz 6.50

Total 2,732.11 Contractor's Profit & Overheads 20 Percent 546.42 Total for 128 Sft. 3,278.53 Rate Per Sft 3278.53 x 100 = 2,561.35

128Labour

Carpenter 1.00 Nos 300.00 P. Day 300.00 Cooly Skilled 1.00 Nos 160.00 P. Day 160.00

Total 460.00 Sundries 10 Percent 46.00 Total 506.00 Contractor's Profit & Overheads 20 Percent 101.20 Total for 128 Sft. 607.20 Rate Per Sft 607.20 x 100 = 474.38

128Item Rates

Labour Rate Per 100 Sft Rs. 474.38 Say 474.40 Labour Rate Per Sqm Rs. 51.04 Say 51.05

Composite Rate Per 100 Sft Rs. 3,035.73 Say 3,035.75 Composite Rate Per Sqm Rs. 326.64 Say 326.65

Page 115

Item No. 40 Providing and fixing partition including frame work.a - (ii) Ply wood ¼" (6mm) thick.

One Side.




Material

Ply Wood 1x8'x16 128.00 SftWastage 5% 6.40 Sft

134.40 Sft 10.00 Sft 1,344.00 Deodar Wood

Frame work 2x16x3"x2½" 1.67 CftHorizontal post 1x16x2"x2½" 0.56 CftVertical post 3x8x2½"x2½" 0.83 CftVertical post 3x8x2½"x2½" 0.83 Cft


4.47 Cft 500.00 P. Cft 2,235.00 Nails of all sorts 0.47 Kg 43.00 Kg 20.21 Screws 2.00 Doz 3.25 P. Doz 6.50


128Labour



128Item Rates



Page 116

Item No. 40 Providing and fixing partition including frame work.a - (iii) Masonite sheet.

One Side.




Material

Masonite sheet 1x8x16 128.00 SftWastage 5% 6.40 Sft

134.40 Sft 22.00 Sft 2,956.80 Deodar Wood & other Accessories

Frame work 2x16x3"x2½" 1.67 CftHorizontal post 1x16x2"x2½" 0.56 Cft 2x8x3"x2½" 0.83 Cft3x8x2"x2½" 0.83 Cft


4.47 Cft 500.00 P. Cft 2,235.00 Nails of all sorts 0.47 Kg 43.00 P. Kg 20.21 Screws 2.00 Doz 3.25 P. Doz 6.50

Total 5,218.51 Contractor's Profit & Overheads 20 Percent 1,043.70 Total for 128 Sft. 6,262.21 Rate Per Sft 6262.21 x 100 = 4,892.35

128Labour



128Item Rates



Page 117

Item No. 40 Providing and fixing partition including frame work.b (1) Sheets on both sides of frame work.

Hard Board.




Material

Hard Board Sheet

2 x 16 x 8 256.00 SftWastage 5% 12.80 Sft

268.80 Sft 3.50 Sft 940.80 Deodar Wood & other Accessories

Horizontal Post.

2x16x3"x2½" 1.67 Cft 1x16x2"x2½" 0.56 CftVertical post 2x8x3"x2½" 0.83 Cft 3x8x2"x2½" 0.83 Cft


4.47 Cft 500.00 P. Cft 2,235.00 Nails of all sorts 0.70 Kg 43.00 P. Kg 30.10 Screws of all sorts 2.00 Doz 3.25 P. Doz 6.50 Total 3,212.40 Contractor's Profit & Overheads 20 Percent 642.48 Total for 128 Sft. 3,854.88 Rate Per Sft 3854.88 x 100 = 3,011.63

128Labour



128

Item Rates



Page 118

Item No. 40 Providing and fixing partition including frame work.b - (ii) Ply wood. ¼" (6mm) thick




Material

Ply Wood Sheet 2 x 16 x 8 (2 x 4.876 x 256.00 Sft2.438) = 23.78 M²

Wastage 5% 12.80 Sft268.80 Sft 10.50 Sft 2,822.40

Deodar Wood for frame work

Horizontal post 2x16x3"x2½" 1.67 CftCross 1x16x2"x2½" 0.56 CftVertical post 2x8x3"x2½" 0.83 CftVertical post 3x8x2"x2½" 0.83 Cft


4.47 Cft 550.00 P. Cft 2,458.50 Nails of all sorts 0.70 Kg 43.00 P. Kg 30.10 Screws 3.00 Doz 3.25 P. Doz 9.75 Total 5,320.75 Contractor's Profit & Overheads 20 Percent 1,064.15 Total for 128 Sft. 6,384.90 Rate Per Sft 6384.90 x 100 = 4,988.20

128Labour



Contractor's Profit & Overheads 20 Percent 121.44 Total for 128 Sft. 728.64 Rate Per Sft 728.64 x 100 = 569.25

128Item Rates



Page 119

Item No. 40 Providing and fixing partition including frame work.b - (iii) Masonite sheet.




Material

Masonite sheet 2x16'x8' 256.00 SftWastage 5% 12.80 Sft

268.80 Sft 22.00 Sft 5,913.60 Deodar Wood & other Accessories

Horizontal Post.

2x16x3"x2½" 1.67 Cft 1x16x2"x2½" 0.56 CftVertical post 2x8x3"x2½" 0.83 Cft 3x8x2"x2½" 0.83 Cft


4.47 Cft 500.00 P. Cft 2,235.00 Nails of all sorts 0.70 Kg 43.00 P. Kg 30.10 Screws 2.00 Doz 3.25 P. Doz 6.50 Total 8,185.20 Contractor's Profit & Overheads 20 Percent 1,637.04 Total 9,822.24 Rate Per Sft 9822.24 x 100 = 7,673.63

128Labour


Total 552.00 Sundries 10 Percent 55.20 Total 607.20 Contractor's Profit & Overheads 20 Percent 121.44 Total 728.64 Rate Per Sft 728.64 x 100 = 569.25

128Item Rates



Page 120

DESCRIPTION OF ITEM NO 41: Providing and fixing ceiling including frame work.i) Hard Board.




Material

Hard Board 16x12 192.00 Sft 3.50 Sft 672.00

Partal Wood

7x16x3"x1½" 3.50 Cft 9x16x3"x1½" 3.38 Cft


7.57 Cft 350.00 P. Cft 2,649.50 Hard Wood Gutti 32.00 Nos 2.00 Each 64.00 Screws 3.00 Doz 3.25 P. Doz 9.75 Nail 0.70 Kg 43.00 P. Kg 30.10 Cement for grouting 0.178 Bag 230.00 P. Bag 40.94 M.S clamp 4.00 Nos 40.00 Each 160.00 M.S hook 4.00 Nos 12.00 Each 48.00 Total 3,674.29 Contractor's Profit & Overheads 20 Percent 734.86 Total for 192 Sft. 4,409.15 Rate Per Sft 4409.15 x 100 = 2,296.43

192Labour

Carpenter 3.00 Nos 300.00 P. Day 900.00 Cooly Skilled 2.00 Nos 160.00 P. Day 320.00 Cooly 1.00 No 140.00 P. Day 140.00

Total 1,360.00 Sundries 10 Percent 136.00 Total 1,496.00 Contractor's Profit & Overheads 20 Percent 299.20 Total for 192 Sft. 1,795.20 Rate Per Sft 1795.20 x 100 = 935.00

192Item Rates



Page 121

Item No. 41 Providing and fixing ceiling including frame work.ii) Chip Board Sheets.




Material

Chip Board 1x16x12 192.00 Sft 16.40 Sft 3,148.80

Partal Wood & other Accessories

Partal Wood.

7x16x3"x1½" 3.50 Cft 9x16x3"x1½" 3.38 Cft


7.57 Cft 350.00 P. Cft 2,649.50 Wooden Hand Gutti 32.00 Nos 2.00 Each 64.00 Screws 3.00 Doz 3.25 P. Doz 9.75 Nail 0.70 Kg 43.00 P. Kg 30.10 Cement for grouting 0.178 Bag 230.00 P. Bag 40.94 M.S clamp 4.00 Nos 40.00 Each 160.00 M.S hook 4.00 Nos 12.00 Each 48.00 Total 6,151.09 Contractor's Profit & Overheads 20 Percent 1,230.22 Total for 192 Sft. 7,381.31 Rate Per Sft 7381.31 x 100 = 3,844.43

192Labour



192Item Rates

Labour Rate Per 100 Sft Rs. 935.00 Say 935.00 Labour Rate Per Sqm Rs. 100.61 Say 100.60 Composite Rate Per 100 Sft Rs. 4,779.43 Say 4,779.45 Composite Rate Per Sqm Rs. 514.27 Say 514.25

Page 122

Item No. 41 Providing and fixing ceiling including framework.

iii) Ply Wood ¼" (6mm) thick.




Material

Ply Wood ¼" (6mm) 12x16 192.00 Sft 10.50 Sft 2,016.00


Partal Wood :

7x16x3"x1½" 3.50 Cft 9x16x3"x1½" 3.38 Cft


7.57 Cft 350.00 P. Cft 2,649.50 Wooden Hand Gutti 32.00 Nos 2.00 Each 64.00 Screws 3.00 Doz 3.25 P. Doz 9.75 Nail 0.70 Kg 43.00 P. Kg 30.10 Cement for grouting 0.178 Bag 230.00 P. Bag 40.94 M.S clamp 4.00 Nos 40.00 Each 160.00 M.S hook 4.00 Nos 12.00 Each 48.00 Total 5,018.29 Contractor's Profit & Overheads 20 Percent 1,003.66 Total for 192 Sft. 6,021.95 Rate Per Sft 6021.95 x 100 = 3,136.43

192Labour


Total 1,360.00 Sundries 10 Percent 136.00 Total 1,496.00 Contractor's Profit & Overheads 20 Percent 299.20 Total 1,795.20 Rate Per Sft 1795.20 x 100 = 935.00

192Item Rates



Page 123

Item No. 41 Providing and fixing ceiling including frame work.iv) Masonite Sheet.




Material

Masonite Sheet 1x16x12 192.00 Sft 24.00 Sft 4,608.00


Partal Wood.

7x16x3"x1½" 3.50 Cft 9x16x3"x1½" 3.38 Cft


7.57 Cft 350.00 P. Cft 2,649.50 Wooden Hand Gulli 32.00 Nos 2.00 Each 64.00 Screws 3.00 Doz 3.25 P. Doz 9.75 Nail 0.70 Kg 43.00 P. Kg 30.10 Cement for grating 0.178 Bag 230.00 P. Bag 40.94 M.S clamp 4.00 Nos 40.00 Each 160.00 M.S hook 4.00 Nos 12.00 Each 48.00 Total 7,610.29 Contractor's Profit & Overheads 20 Percent 1,522.06 Total for 192 Sft. 9,132.35 Rate Per Sft 9132.35 x 100 = 4,756.43

192Labour

Carpenter 3.00 Nos 300.00 P. Day 900.00 Cooly Skilled 2.00 Nos 160.00 P. Day 320.00 Cooly Unskilled 1.00 No 140.00 P. Day 140.00


192Item Rates



Page 124

Item No. 42 Providing and fixing thermopore false ceilingincluding wooden frame panelling, cost of M.S.clamps, making holes in walls and repairingdamaged surface, complete in all respects.

a) Deodar wood frame panelling.i) ¾" (20mm) Thick.




Material

Thermopore ¾" thick 144.00 SftWastage 5% 7.20 Sft

151.20 Sft 4.25 Sft 642.60 Deodar Wood

Frame Main 3x12¼x3"x2" 1.53 CftCross 3x12¼x1½"x2" 0.77 CftWooden Strips 12x1½"x½" 0.25 Cft


3.06 Cft 500.00 P. Cft 1,530.00

Sawing charge 3.06 Cft 8.00 P. Cft 24.48 Making holes in walls L.S. 37.33 Wooden gutties 3 interval 16.00 Nos 2.00 Each 32.00 Screws above 1" long 6.00 Doz 3.25 P. Doz 19.50 Nail 0.70 Kg 43.00 P. Kg 30.10 M.S. hooks 4.00 Nos 12.00 Each 48.00 M.S. clamps 4.00 Nos 40.00 Each 160.00 Cement sand for repair 0.083 Bag 230.00 P. Bag 19.09 Sand 1.500 Cft. 350.00 % Cft. 5.25


144

Page 125



Labour

Carpenters 2.25 Nos 300.00 P. Day 675.00 Cooly Skilled 2.00 Nos 160.00 P. Day 320.00 Cooly 0.50 No 140.00 P. Day 70.00 Mason 0.25 No 300.00 P. Day 75.00


Contractor's Profit & Overheads 20 Percent 250.80 Total for 144 Sft. 1,504.80 Rate Per Sft 1504.80 x 100 = 1,045.00

144

Item Rates

Labour Rate Per 100 Sft Rs. 1,045.00 Say 1,045.00 Labour Rate Per Sqm Rs. 112.44 Say 112.45


Page 126


a) Deodar wood frame panellingii) 1" (25mm) Thick.




Material

Thermopore 1" thick 144.00 SftWastage 5% 7.20 Sft

151.20 Sft 5.68 Sft 858.82 Deodar Wood

Frame Main 3x12¼x2"x3" 1.53 CftCross 3x12¼x1½"x2" 0.77 CftWooden Strips 4x12x1½"x½" 0.25 Cft


3.06 Cft 500.00 P. Cft 1,530.00 Sawing charge 3.06 Cft 8.00 24.48 Making holes in walls L.S. 37.33 Screws of all sorts 6.00 Doz 3.25 P. Doz 19.50 Nail 0.70 Kg 43.00 P. Kg 30.10 M.S. hooks 4.00 Nos 12.00 Each 48.00 M.S. clamps 4.00 Nos 40.00 Each 160.00 Cement sand for repair L.S. 20.00


144

Page 127



Labour

Carpenter 2.25 Nos 300.00 P. Day 675.00 Cooly Skilled 2.00 Nos 160.00 P. Day 320.00 Cooly 0.50 No 140.00 P. Day 70.00 Mason 0.25 No 300.00 P. Day 75.00



144

Item Rates



Page 128


b) Pertal wood frame panellingi) ¾" (20mm) Thick.




Material

Thermopore ¾" thick 144.00 SftWastage 5% 7.20 Sft

151.20 Sft 4.25 Sft 642.60 Pertal Wood

Frame Main Style 3x12¼x2"x3" 1.53 CftCross Style 3x12¼x1½"x2" 0.77 CftCross Style 4x12x1½"x½" 0.25 Cft


3.06 Cft 350.00 P. Cft 1,071.00 Sawing charge 3.06 Cft 8.00 P. Cft 24.48 Making holes in walls L.S. 37.33 Wooden gutties 3 interval 16.00 Nos 2.50 Each 40.00 Screws of all sorts 6.00 Nos 3.25 P. Doz 19.50 Nail 0.70 Kg 43.00 P. Kg 30.10 M.S. hooks 4.00 Nos 12.00 Each 48.00 M.S. clamps 4.00 Nos 40.00 Each 160.00 Cement sand for repair 0.083 Bag 230.00 P. Bag 19.09 Sand 1.500 Cft. 350.00 % Cft. 5.25


144

Page 129



Labour

Carpenter 2.25 Nos 300.00 P. Day 675.00 Cooly Skilled 2.00 Doz 160.00 P. Day 320.00 Cooly 0.50 No 140.00 P. Day 70.00 Mason 0.25 No 300.00 P. Day 75.00



144

Item Rates



Page 130


b) Pertal wood frame panellingii) 1" (25mm) Thick.


Qty RatePer Unit Amount


Material

Thermopore 1" thick 144.00 SftWastage 5% 7.20 Sft

151.20 Sft 5.68 Sft 858.82 Pertal Wood

Frame Main Style 3x12¼x2"x3" 1.53 CftCross Style 3x12¼x1½"x2" 0.77 CftCross Style 4x12x1½"x½" 0.25 Cft


3.06 Cft 350.00 P. Cft 1,071.00 Sawing charge 3.06 Cft 8.00 P. Cft 24.48 Making holes in walls L.S. 37.33 Wooden gutties 3 interval 16.00 Nos 2.00 Each 32.00 Screws of all sorts 6.00 Doz 3.25 P. Doz 19.50 Nail 0.70 Kg 43.00 P. Kg 30.10 M.S. hooks 4.00 Nos 12.00 Each 48.00 M.S. clamps 4.00 Nos 40.00 Each 160.00 Cement sand for repair 0.083 Bag 230.00 P. Bag 19.09 Sand 1.500 Cft. 350.00 % Cft. 5.25


144

Page 131



Labour

Carpenter 2.25 Nos 300.00 P. Day 675.00 Cooly Skilled 2.00 Nos 160.00 P. Day 320.00 Cooly 0.50 No 140.00 P. Day 70.00 Mason 0.25 No 300.00 P. Day 75.00



144

Item Rates



Page 132

DESCRIPTION OF ITEM NO 43: a) Fixing door including chowkhat.



Labour

Mason 0.25 No 300.00 P. Day 75.00 Cooly 0.25 No 140.00 P. Day 35.00



Item Rates


Page 133

Item No. 43 b) Fixing windows including chowkhat.



Labour

Mason 0.125 No 300.00 P. Day 37.50 Cooly 0.125 No 140.00 P. Day 17.50



Item Rates


Page 134

DESCRIPTION OF ITEM NO 44: a) Glazing with panes 160Z to 180Z (454Gm to 512Gm) including cost of putty.




Material

Detail of glass panes

Glass Panes 14.00 SftWastage 10% 1.40 Sft

15.40 Sft 12.00 Sft 184.80 Cost of Putty and nails L.S. 12.00


14Labour

Glazier for cutting and fixing glass

panes including supplying front & back. 0.25 No 170.00 P. Day 42.50 Cooly Skilled 0.25 No 160.00 P. Day 40.00



14

Item Rates



Page 135

Item No. 44 b) Glazing with panes 16 Oz. to 18 Oz. (454Gm to 512Gm) using deodar wooden fillets and putty.




Material

Glass Panes 14.00 Sft 12.00 Sft 168.00 D. Wood 0.09 Cft 550.00 P. Cft 49.50 Cost of nails and putty. L.S. 12.00


14Labour

Glazier for cutting and fixing glass

panes including supplying front & back. 0.25 No 170.00 P. Day 42.50 Cooly Skilled 0.25 No 160.00 P. Day 40.00 Cartpenter for 0.13 No 300.00 P. Day 39.00



14

Item Rates



Page 136

DESCRIPTION OF ITEM NO 45: Glazing with glass panes 24 Oz. to 26 Oz. (680Gm to737Gm) using putty and deodar wooden fillets.




putty and deodar wooden fillet.

Considering 5 Nos panes of average

size i.e. 5x18"x24" 15 Sft

Material

Glass Panes 15.00 SftWastage 10% 1.50 Sft

16.50 Sft 14.00 Sft 231.00 D. Wood for fillets 0.06 Cft 550.00 P. Cft 33.00 Cost of putty and nails L.S. 12.00


15Labour

Glazier 0.38 No 170.00 P. Day 64.60 Cooly Skilled 0.38 No 160.00 P. Day 60.80 Cartpenter 0.13 No 300.00 P. Day 39.00 Cooly 0.13 No 140.00 P. Day 18.20



15Item Rates



Page 137

DESCRIPTION OF ITEM NO 46:

a) Cutting to required sizes and fixing glass paneswith putty.




Material

Cost of nails & putty L.S. 12.00


14Labour

Glazier 0.20 No 170.00 P. Day 34.00 Cooly Skilled 0.15 No 160.00 P. Day 24.00



14

Item Rates



Page 138

Item No. 46 b) Cutting to required sizes and fixing glass paneswith wooden fillets and putty.




Material

Deodar wood for fillets 0.10 Cft 500.00 P. Cft 50.00 Putty and nails L.S. 12.00


16Labour

Glazier 0.20 No 170.00 P. Day 34.00 Cooly Skilled 0.20 No 160.00 P. Day 32.00 Carpenter 0.10 No 300.00 P. Day 30.00 Cooly Skilled 0.10 No 160.00 P. Day 16.00



16

Item Rates



Page 139

DESCRIPTION OF ITEM NO 47: Glazing with plate glass ¼" (6mm) thick includingthe cost of deodar wood fillets and putty.

a) Glazing upto 8 Sft (0.744M²).




Material

Plate glass ¼" (6mm) thick 8.00 SftWastage 10% 0.80 Sft

8.80 Sft 32.00 Sft 281.60 Deodar wood for fillets 0.05 Cft 500.00 P. Cft 25.00 Cost of nails and putty L.S. 12.00


8Labour




8

Item Rates



Page 140

Item No. 47 b) Glazing exceeding 8 Sft (0.744M²)and not exceeding 24 Sft (2.230M²)




Material

Plate glass ¼" (6mm) thick 16.00 SftWastage 10% 1.60 Sft

17.60 Sft 32.00 Sft 563.20 Deodar wood for fillets 0.10 Cft 500.00 P. Cft 50.00 Cost of nails and putty L.S. 26.40


16Labour




16

Item Rates



Page 141

DESCRIPTION OF ITEM NO 48: Providing and fixing 1½" (40mm) thick deodarwood panelled or panelled and glazed, doors andwindows, with mild steel chowkhat (frame), etc.complete in all respects (excluding sliding bolt orlock) with :

i) M.S. angle iron 1½"x1½"x¼" (40x40x6mm)welded with M.S. flat 2"x¼" (50x6mm)




Material

Angle Iron 1½"x1½"x¼"

Vertical 2 x 7 = 14.00 Rft.

18.00 Rft.

18.90 Rft.

18.90 Rft. @ 2.34 lbs/Rft. 44.23 lbsMS Bar ½"dia 4' @ 0.67 lbs/Rft. 2.68 lbsMS Flat 2"x¼ = 18.90 Rft. @ 1.70 lbs/Rft. 32.13 lbs

79.04 lbs35.85 Kgs 22.00 per Kg 788.70

Wood

Vertical Style 4x6'-8½"x4"x1½" 1.12 CftHorizontal Top 2x1'-11½"x4"x1½" 0.16 CftMiddle Top 2x1'-11½"x4"x1½" 0.16 CftLocal Top 2x1'-11½"x6"x1½" 0.24 CftBottom Top 2x1'-11½"x8"x1½" 0.32 Cft

Panells

2x16½"x23"x5/8" 0.24 Cft4x16½"x19½"x5/8" 0.47 Cft

Beading

2(16½+16½+23+23) 5/80.01 Cft

2x8

4(16½+16½+19½+19½) 5/80.02 Cft

2x82.74 Cft


Horizontal l 1 x 4 = 4.00 Rft.

Wastage 5% 0.90 Rft.

(1½+2½) = 0.01

(1½+1½)

Page 142



Fitting

Hinges 4" (100mm) 8.00 Nos 4.60 Each 36.80 Tower bolt 9: (225mm) 3.00 Nos 27.00 Each 81.00 Handle 6" (150mm) 3.00 Nos 8.00 Each 24.00 Iron hold fast 6.00 Nos 12.00 Each 72.00 Rubber 2.00 Nos 4.00 Each 8.00 Hook & clamp 2.00 Nos 4.00 Each 8.00

Screws 2.50 Doz 3.25 P. Doz 8.13 Glue 0.05 Kg. 80.00 P.Kg. 4.00 Spikes 0.13 Kg. 30.00 P.Kg. 3.99 Sawing charge 35.60 Sft 0.80 Sft 28.48


27Labour

Carpenter 2.40 Nos 300.00 P. Day 720.00 Cooly Skilled 1.80 Nos 160.00 P. Day 288.00 Welder 1.00 No 170.00 P. Day 170.00 Blacksmith 0.57 No 170.00 P. Day 96.90



27Item Rates



Page 143

Item No. 48 Providing and fixing 1½" (40mm) thick deodarwood panelled or panelled and glazed, doors andwindows, with mild steel chowkhat (frame), etc.complete in all respects (excluding sliding bolt orlock) with :

ii) M.S. Tee Iron 1½"x1½"x¼" (40x40x6mm)welded with M.S. flat ½"x¼" (12x6mm).




Material

T-Iron 1½"x1½"x¼"

Vetical 2x7 14 Rft

18.00 Rft

18.90 Rft

18.90 Rft 2.36 Lbs/Rft 44.60 LbsM.S. bar ½" Ø = 4' @ 0.67 Lbs 2.68 LbsM.S. flat ½"x¼"=18.90 Rft @ 0.425 Lbs 8.03 Lbs

55.31Lbs ( 25.10)Kg 22.00 P. Kg 552.20 Deodar Wood

Vertical Style 4x6'-8½"x4"x1½" 1.12 CftHorizontal Top 2x1'-11½"x4"x1½" 0.16 CftMiddle Top 2x1'-11½"x4"x1½" 0.16 CftLocal Top 2x1'-11½"x6"x1½" 0.24 CftBottom Top 2x1'-11½"x8"x1½" 0.32 Cft

Panells

2x16½"x23"x5/8" 0.24 Cft4x16½"x19½"x5/8" 0.47 Cft

Beading

2(16½+16½+23+23) 5/80.01 Cft

2x8

4(16½+16½+19½+19½) 5/80.02 Cft

2x82.74 Cft



Wastage 5% 0.90 Rft

(1½+2½)

(1½+1½)

Page 144



Fitting

Hinges 4" (100mm) 8.00 Nos 4.60 Each 36.80 Tower bolt 9: (225mm) 3.00 Nos 17.00 Each 51.00 Handle 6" (150mm) 3.00 Nos 8.00 Each 24.00 Iron hold fast 6.00 Nos 12.00 Each 72.00 Rubber 2.00 Nos 4.00 Each 8.00 Hook & clamp 2.00 Nos 4.00 Each 8.00 Screws 2.50 Doz 3.25 P. Doz 8.13 Glue 0.05 Kg. 80.00 P.Kg. 4.00 Spikes 0.13 Kg. 30.00 P.Kg. 3.99 Sawing charge 35.60 Sft 0.80 Sft 28.48


27Labour

Carpenter 2.40 Nos 300.00 P. Day 720.00 Cooly Skilled 1.80 Nos 160.00 P. Day 288.00 Welder 1.00 No 170.00 P. Day 170.00 Blacksmith 0.57 No 170.00 P. Day 96.90



27

Item Rates



Page 145

DESCRIPTION OF ITEM NO 49: Providing and fixing 1½" (40mm) thick hollow flushdoors and windows, with commercial ply (3mm) onboth faces of deodar wood shutter frame 1¼"(32mm) thick and partal wood braces at about 3"(76mm) apart and deodar wood lipping 1½"x3/8",(40x10mm) fixed with M.S. chowkhat (frame),including chromium plated fittings, etc. complete inall respects (without sliding bolt or lock)

a) M.S. Angle Iron 1½"x1½"x¼" welded with M.S.flat 2"x¼"




Material

Angle Iron 1½"x1½"x¼"

Vetical 2x7 14 Rft

18.00 Rft

18.90 Rft 43.85 LbsM.S. flat 2"x¼" (50x6mm)

Vetical 2x7 14 Rft

18.00 Rft

18.90 Rft

18.90 Rft @ 1.68 Lbs/Rft 31.75 LbsM.S. flat patti 1"x1/8" (25x3mm) at bottom 1.68 Lbs

77.28Lbs (35.06 Kg.) 22.00 P. Kg 771.32 Deodar Wood

Vertical Style 2x6'-8½"x4"x1¼" 0.47 CftVertical Style 3x6'-8½"x2"x1¼" 0.35 CftHorizontal Style 1x3'-11¼"x4"x1¼" 0.14 CftMiddle Style 1x3'-11¼"x4"x1¼" 0.14 CftLock Style 1x3'-11¼"x6"x1¼" 0.21 CftBottom Style 1x3'-11¼"x8"x1¼" 0.27 CftSide Strip 2x6'-8¾"x1½"x1/8" 0.02 CftSide Strip 2x3'-8½"x1½"x1/8" 0.01 Cft


2.17 Cft 500.00 P. Cft 1,085.00


Wastage 5% 0.90 Rft


Wastage 5% 0.90 Rft

Page 146



Fitting

Hinges 4" (100mm) 4.00 Nos 4.60 Each 18.40 Tower bolt 9: (225mm) 2.00 Nos 17.00 Each 34.00 Handle 6" (150mm) 2.00 Nos 8.00 Each 16.00 Iron hold fast 6.00 Nos 12.00 Each 72.00 Rubber chocks 1.00 No 4.00 Each 4.00 Hook & clamp 1.00 No 4.00 Each 4.00 Screws 2.50 Doz 3.25 P. Doz 8.13 Glue 0.75 Kg. 80.00 P.Kg. 60.00 Spikes 0.20 Kg. 30.00 P.Kg. 6.00 Sawing charge 21.70 Sft 0.80 Sft 17.36

Commercial Ply (3mm)

2x3'-11½"x6'-8¾" 53.38 SftWastage 15% 8.01 Sft

61.39 Sft 10.50 Sft 644.60 Total 2,740.80 Contractor's Profit & Overheads 20 Percent 548.16 Total for 27 Sft. 3,288.96 Rate Per Sft 3288.96 = 121.81

27Labour

Welder for making frame 1 No 170.00 Each 170.00 Black Smith 1 Nos 170.00 Each 170.00

For Panelling pressing and erecting door

Carpentre 1 Nos 300.00 P. Day 300.00 Skilled Cooly 1 No 160.00 P. Day 160.00

Total 800.00 Sundries 10 Percent 80.00 Total 880.00 Contractor's Profit & Overheads 20 Percent 176.00 Total for 27 Sft. 1,056.00 Rate Per Sft 1056.00 = 39.11

27Item Rates



Page 147

DESCRIPTION OF ITEM NO 49: Providing and fixing 1½" (40mm) thick hollow flushdoors and windows, with commercial ply (3mm) onboth faces of deodar wood shutter frame 1¼"(32mm) thick and partal wood braces at about 3"(76mm) apart and deodar wood lipping 1½"x3/8",(40x10mm) fixed with M.S. chowkhat (frame),including chromium plated fittings, etc. complete inall respects (without sliding bolt or lock)

b) M.S. Tee Iron 1½"x1½"x¼" welded with M.S.flat ½"x¼"




Material

Tee Iron 1½"x1½"x¼"

Vetical 2x7 14 Rft

18.00 Rft

18.90 Rft @ 2.36Lbs/Rft 44.60 LbsM.S. flat ½"x¼" (40x6mm)

Vetical 2x7 14 Rft

18.00 Rft

18.90 Rft @ 0.423Lbs/Rft 8.03 LbsM.S. bar ½" dia = 4 Rft @ 0.67 Lbs 2.68 Lbs

55.31Lbs ( 25.10 Kg) 22.00 P. Kg 552.20 Deodar Wood

Vertical Style 2x6'-8½"x4"x1¼" 0.47 CftVertical Style 3x6'-8½"x2"x1¼" 0.35 CftHorizontal Style 1x3'-11¼"x4"x1¼" 0.14 CftMiddle Style 1x3'-11¼"x4"x1¼" 0.14 CftLock Style 1x3'-11¼"x6"x1¼" 0.21 CftBottom Style 1x3'-11¼"x8"x1¼" 0.27 CftSide Strip 2x6'-8¾"x1½"x1/8" 0.02 CftSide Strip 2x3'-8½"x1½"x1/8" 0.01 Cft


2.17 Cft 500.00 P. Cft 1,085.00


Wastage 5% 0.90 Rft


Wastage 5% 0.90 Rft

Page 148



Fitting

Hinges 4" (100mm) 4.00 Nos 4.60 Each 18.40 Tower bolt 9: (225mm) 2.00 Nos 17.00 Each 34.00 Handle 6" (150mm) 2.00 Nos 8.00 Each 16.00 Iron hold fast 6.00 Nos 12.00 Each 72.00 Rubber chocks 1.00 No 4.00 Each 4.00 Hook & clamp 1.00 No 4.00 Each 4.00 Screws 2.50 Doz 3.25 P. Doz 8.13 Glue 0.75 Kg. 80.00 P.Kg. 60.00 Spikes 0.20 Kg. 30.00 P.Kg. 6.00 Sawing charge 21.70 Sft 0.80 Sft 17.36

Commercial Ply (3mm)

2x3'-11½"x6'-8¾" 53.38 SftWastage 15% 8.01 Sft

61.39 Sft 10.50 Sft 644.60 Total 2,521.68 Contractor's Profit & Overheads 20 Percent 504.34 Total for 27 Sft. 3,026.02 Rate Per Sft 3026.02 = 112.07

27Labour

Welder for making frame 1 No 170.00 Each 170.00 Black Smith 1 Nos 170.00 Each 170.00

For Rendring & Erection Door

Carpentre 1 Nos. 300.00 P. Day 300.00 Skilled Cooly 1 No. 160.00 P. Day 160.00

Total 800.00 Sundries 10 Percent 80.00 Total 880.00 Contractor's Profit & Overheads 20 Percent 176.00 Total for 27 Sft. 1,056.00 Rate Per Sft 1056.00 = 39.11

27Item Rates



Page 149

DESCRIPTION OF ITEM NO 50: Providing and fixing 1½" (40mm) thick solid flushdoor shutter sterling or equivalent with commercialply (5mm thick) on both sides double pressed anddeodar wood lipping 1½"x3/8" (40x10mm) aroundshutter including chromium plated fittings, ironhinges with aluminium kick plate 22SWG on bothsides & finger plate complete in all respects.

Remarks : If C.I. finger plate and kick plate are notprovided/ fixed the composite rate will be reducedby Rs. 7.60 Per Sft (81.76M²).



Rate Analysis for 3.5' x 7' = 24.5 Sft

Material

Solid flush

Door leaf 1½" (40mm) thick sterling

or equivalent with commerical ply

(5mm) thick both sides.

3½"x7'-0' = 24.50 Sft 24.50 Sft 92.00 Sft 2,254.00

Deodar Wood Lipping 3/8"

(3.5+3.5+7.0+7.0) 21.00 Rft 15.00 per/ft. 315.00

Hinges 4" (100mm) 4.00 Nos 4.60 Each 18.40 Tower bolt C.P. 2.00 Nos 30.00 Each 60.00 C.P. Handle best quality 2.00 Nos 10.50 Each 21.00 Door stopper 1.00 No 12.00 Each 12.00 C.P. finger plate with screws 1.00 No 80.00 Each 80.00 Kick plate 22 SWG on both sides 2.00 Nos 30.00 Each 60.00

Total 2,820.40 Contractor's Profit & Overheads 20 Percent 564.08 Total for 24.5 Sft. 3,384.48 Rate Per Sft 3384.48 = 138.14

24.5

Page 150



Labour

For planning & fixing of lipping with

door fitting complete.

Carpentre 1.00 No 300.00 P. Day 300.00 Skilled Cooly 1.00 No 160.00 P. Day 160.00



24.5

Item Rates



Page 151

DESCRIPTION OF ITEM NO 51: Providing and fixing panelled door of M.S. Sheetwith forged door leaves of M.S. Sheet 22 SWG fittedin hollow frame chowkhat 3"x4½" (76x114mm)made of M.S. sheet 18 SWG, filled with plain cementconcrete 1:3:6 etc. complete, with all fittings andhammer painting, including carriage to site andfixing in position.




Material

M.S. Sheet 18 SWG

for chowkhat

18¾'x15" 23.44 SftWastage 20% 4.69 Sft

28.13 Sft 40.00 Sft 1,125.20 M.S. Sheet 22 SWG

for shutter

26½x7 1/8 31.50 SftWastage 20% 6.30 Sft

37.80 Sft 32.00 Sft 1,209.60 M.S. Flat 1"x1/16" (25x2mm)

6'-9½"x0.21 1.43Lb (0. 65) Kg 22.00 P. Kg 14.30

Fitting

Hinges 4" (100mm) 6.00 Nos 4.60 Each 27.60 Tower bolt 9: (225mm) 2.00 Nos 17.00 Each 34.00 Handle 6" (150mm) 2.00 Nos 8.00 Each 16.00 Iron hold fast 6.00 Nos 12.00 Each 72.00 Screws L.S. 4.00 Welding electrode 4.00 Nos 2.01 Each 8.02 Electricity Charges L.S. 16.00

Cement concrete (1:3:6)

Cement 0.21 Bag 230.00 Each 48.30 Sand 0.76 Cft 3.50 P. Cft 2.66 Bagri 1.52 Cft 18.50 P. Cft 28.12


28

Page 152



Labour

Welder 0.50 No 170.00 P. Day 85.00 Blacksmith 2.50 Nos 170.00 P. Day 425.00 Mason 0.25 No 300.00 P. Day 75.00 Coolies 0.75 No 140.00 P. Day 105.00



28

Item Rates



Page 153

DESCRIPTION OF ITEM NO 52: Providing and laying 24 SWG aluminium kickplate 4" (100mm) high fixed with screws 4"(100mm) Centre to Centre on bottom rail of flushdoors only. of commercial ply.



Rate Analysis for 4 Rft

Material

Aluminium plate 4" (100mm) wide

and 24 SWG 0.18 Kg 96.00 P. Kg 17.28

Total 17.28 Contractor's Profit & Overheads 20 Percent 3.46 Total for 4 Rft. 20.74 Rate Per Rft 20.74 = 5.18

4Labour




4

Item Rates


Composite Rate Per Rft Rs. 17.06 Say 17.05 Composite Rate Per Rqm Rs. 55.97 Say 55.95

Page 154

DESCRIPTION OF ITEM NO 53: Providing and fixing curtain railing to doors andwindows, comprising of TOSO-elite Japan madesuperior type of railing or equivalent, fixed over 4"x¾" (100x20mm) deodar wood strip, includingpainting.



Material

Rate For 10 Rft

Railing 10.00 Rft 9.00 P. Rft 90.00 Cutting of Railing 5.29 Screws 1.00 Dozen 1.68 P, Doz 1.68 Guttis 6.00 Nos 0.25 Each 1.50 Deodar wood 0.21 Cft 550.00 P. Cft 115.50

Total 213.97 Contractor's Profit & Overheads 20 Percent 42.79 Total for 10 Rft. 256.77

Material Rate Per Rft. 256.77 = 25.68 10

Labour

Rate For 80 Rft




80

Item Rates



Page 155

DESCRIPTION OF ITEM NO 54: Providing and fixing M.S. flat ½"1/8" (12x3mm)grill including ¾"x1/8" (20x3mm) M.S. Flat Frameof windows of approved design including painting 3coat complete in all respect.



Rate Analysis for 2½ x 3½ = 8.75 Sft

Material

M.S. Flat Frame for Grill ¾"x1/8"

(20x3mm)

2½'+3½'+2½'+3½' 12 Sft

@ 0.32 Lbs/Rft 3.84 Lbs (1 .88)Kg 22.00 P. Kg 41.36 M.S. Flat ½"x1/8" (12x3mm)

Straight 3½x2x3 21.00 Rft.Flower 6x4x1¼ 30.00 Rft.Side 6x4x¼ 6.00 Rft.Front 6x1x2 12.00 Rft.Total 69.00 Rft.Wastage 5% 3.45 Rft.

72.45Lb (7.0 )Kg 22.00 P. Kg 154.00 @ 0.21 lbs/rft 15.21 lbs

Hold fast 6" (150mm) long 6.00 Nos 12.00 Each 72.00 Electrical Charges L.S. 5.00 Electrod 0.33 Pkt 360.00 Pkt 21.12 Paint 0.098Lb (0. 08) Gl 450.00 P. Gl 44.10


8.75

Page 156



Labour

Welder 0.17 Nos 170.00 P. Day 28.90 Blacksmith 0.17 No 170.00 P. Day 28.90 Masson 0.20 Nos 300.00 P. Day 60.00 Painter 0.09 No 170.00 P. Day 15.30



8.75

Item Rates



Page 157

DESCRIPTION OF ITEM NO 55: Providing and fixing G.I. Wire gauge 22 SWG12x12 meshes per Sq Inch (625mm) fixed to steelwindow complete with flat iron putti ½"x1/8"(12x3mm) and machine made screws.



Rate Analysis for 4 x 3 = 12 Sft

Material

Wire Gauge 144 (12x12) Mesh 12.00 SftWastage 10% 1.20 Sft

13.20 Sft 6.00 Sft 79.20 Flat Iron ½"x1/8" (12x3mm)

3+3+4+4+4 18.00 Rft

18.90 Rft @ 0.21 Lbs/Rft 4 Lbs (1. 82) Kg 22.00 P. Kg 40.04 Screws 6.70 Dozen 1.68 P. Doz 11.26


12

Labour Rate for 55 Sft.

Blacksmith 1.00 No 170.00 P. Day 170.00 Skilled Cooly 0.40 No 160.00 P. Day 64.00


55Item Rates



Wastage 5% 0.90 Rft

Page 158

DESCRIPTION OF ITEM NO 56: Providing and fixing wooden moulding stopper2½"x5/8" (63x16mm) on door frame fitted with plyof approved quality complete in all respect.

a) Teak Wood Moulding.




Material Teak Wood

2x(6'-10½')+2'-3" 16.00 Rft16x2½"x5/8" 0.17 CftWastage 25% 0.04 Cft

0.22 Cft 1400.00 P. Cft 308.00 Glue 0.19 Kg. 80.00 P. Cft 15.20 Nails 0.116 Kg. 43.00 P. Cft 4.99


16Labour

Labour for sawing, planning and fixing

16 Rft (4.876Rm) moulding in position

carpenter. 0.50 No 300.00 P. Day 150.00



16

Item Rates



Page 159

Item No. 56 Providing and fixing wooden moulding stopper2½"x5/8" (63x16mm) on door frame fitted with plyof approved quality complete in all respect.

b) Deodar Wood Moulding.




Material

Deodar wood 2x(6'-10½')+2'-3" 16.00 Rft16x2½"x5/8" 0.17 CftWastage 25% 0.04 Cft

0.22 Cft 500.00 P. Cft 110.00 Glue 0.26 Kg. 80.00 P. Cft 20.80 Nails 0.116 Kg. 43.00 P. Cft 4.99


16Labour

Labour for sawing, planning and fixing

16 Rft (4.876Rm) moulding in position

carpenter. 0.50 No 300.00 P. Day 150.00



16

Item Rates



Page 160

DESCRIPTION OF ITEM NO 57: Providing and fixing deodar wood dolly framehaving 1½"x1½" (40x40mm) vertical andhorizontal double posts with 1½"x½" (40x40mm)full width of jamb braces at 12" (300mm)including filling of hollow space in between braceswith 1:3:6 P.C.C. fixing of ply of approvedquality there upon & hold fasts complete in allrespects.

a) Teak Wood Ply




Material (Daodar Wood)

Vertical 2x2x7x1½"x1½" 0.44 CftHorizontal 2x3.5x0.125x0.125 0.11 CftBraces 12"x17.25x0.125 0.20 Cft


0.94 Cft 500.00 P. Cft 470.00 PCC (1:3:6) 6"x10½"x1½" 0.82 CftWastage 10% 0.08 Cft

0.90 Cft 48.53 P. Cft 43.68 Teak Wood Ply 17.25 x 0.75 12.94 SftWastage 10% 1.29 Sft

14.23 Sft 19.50 Sft 277.49 Glue 0.29 Kg. 80.00 P. Cft 23.20 Nails 0.116 Kg. 43.00 P. Cft 4.99 Hold fast 4.00 Nos 12.00 Each 48.00

Total 867.35 Contractor's Profit & Overheads 20 Percent 173.47 Total for 13 Sft. 1,040.82 Rate Per Sft 1040.82 = 80.06

13

Page 161



Labour




13

Item Rates



Page 162

Item No. 57 Providing and fixing deodar wood dolly frame having1½"x1½" (40x40mm) vertical and horizontal double postswith 1½"x½" (40x40mm) full width of jamb braces at 12"(300mm) including filling of hollow space in betweenbraces with 1:3:6 P.C.C. fixing of ply of approved qualitythere upon & hold fasts complete in all respects.

b) With Commercial Ply.




Deodar wood 0.94 Cft 500.00 P. Cft 470.00 PCC (1:3:6) 0.90 Cft 48.84 P. Cft 43.96 Commercial ply 14.23 Sft 10.50 P. Sft 149.42 Glue 0.29 Kg. 80.00 P. Cft 23.20 Nails 0.116 Kg. 43.00 P. Cft 4.99 Hold fast L.S. 40.00 Total 731.56 20 Percent 146.31 Total 877.87 Contractor's Profit & Overheads 20 Percent Total for 13 Sft. 877.87 Rate Per Sft 877.87 = 67.53

13Labour



13Item Rates



Page 163

DESCRIPTION OF ITEM NO 58: Providing and fixing ornamental woodenarchitrave 3"x½" (75x12mm) tapered to ¼"(6mm) all along the door frame complete in allrespects.

a) Teak Wood Architrave.



Rate Analysis for 3.5 x 7 = 24.50 Sft

Material

Length of Architrave

2(7'-0")+3'-6" 17.50 Rft

quantity (3/12'x½'x1/12')x17.5' 0.18 CftWastage 25% 0.05 Cft

0.23 Cft 1400.00 P. Cft 322.00 Teak Wood

Nails 0.093 Kg. 43.00 P. Kg. 4.00

Total 326.00 Contractor's Profit & Overheads 20 Percent 65.20 Total for 24.50 Sft. 391.20 Rate Per Sft 391.20 = 15.97

24.50Labour

Carpenter 0.25 No 300.00 P. Day 75.00 Fixing in position L.S. 14.93



24.50

Item Rates



Page 164

Item No. 58 Providing and fixing ornamental woodenarchitrave 3"x½" (75x12mm) tapered to ¼"(6mm) all along the door frame complete in allrespects.

b) Deodar Wood Architrave.



Rate Analysis for 3.5 x 7 = 24.50 Sft

Material

Length of Architrave

2(7')+3'-6" 17.50 Rft

quantity (3/12'x½'x1/12')x17.5' 0.18 CftWastage 25% 0.05 Cft

0.23 Cft 500.00 P. Cft 115.00 Deodar wood

Nails 0.186 Kg. 43.00 P. Kg. 8.00

Total 123.00 Contractor's Profit & Overheads 20 Percent 24.60 Total for 24.50 Sft. 147.60 Rate Per Sft 147.60 = 6.02

24.50Labour

Carpenter 0.25 No 300.00 P. Day 75.00 Fixing in position L.S. 14.93

Total 89.93 Sundries 10 Percent 8.99 Total 98.93 Contractor's Profit & Overheads 20 Percent 19.79 Total for 24.50 118.71 Rate Per Sft 118.71 = 4.85

24.50Item Rates



Page 165

Item No. 58 Providing and fixing vin board cabinet in kitchen i/c termite proofing and polishing / painting with synthetic enamel as specific with handle and draws screw complete in all respects as per drawing

Take Qty 8 x 2 = 16 Sft.



Material

a) Vin Board 3/4 2x8x1½ = 24.00 Sft.Vin Board 5x2x1½ = 15.00 Sft.Total 39.00 Sft. Wastage 20% 7.80Total 46.80 Sft. 24.00 P. Sft. 1,123.20

b) Front Shutter Vin Board

4 x 2 x 2 = 16 16.00 Sft. 24.00 P. Sft. 384.00

c) Frame Deodar Wood 3"x1"

2 x 8 = 16 16.00 Ft.2 x 5 = 10 10.00 Ft.Total 26.00 Ft.Wastage 20% 5.20 Total 31.2 Ft.

31.2 1 3" 0.65 Ft. 500.00 P. Cft. 325.00 12 x 12

d) Termite 0.08 Litre 600.00 P. Litre 49.80

e) Gola 8x2x2 = 32.00 Ft.Wastage 20% 6.40Total 38.40 Ft. 12.00 P. Ft. 460.80

f) Painting / polishing including material + labour

Enamal Paint 0.011 Gallon 450.00 P. Gallon Painter 0.041 No. 170.00 P. Day

11.92 16.00 Ft. 11.92 190.72

g) Handle 4.00 Nos. 35.00 Each 140.00

x x

8'-0

2'-0

Page 166

h) Screws 3.75 Dozen 3.25 P. Doz 12.19

i) Hinges 2.00 Nos. 20.00 Each 40.00


Labour

Carpenter 1.50 Nos. 300.00 P. Day 450.00 Helper 1.25 Nos. 140.00 P. Day 175.00


16Item Rates



Page 167

Amount (Rs.)

Page 168

Amount (Rs.)

Page 169

Amount (Rs.)

Page 170

Amount (Rs.)

Page 171

Amount (Rs.)

Page 172

Amount (Rs.)

Page 173

Amount (Rs.)

Page 174

Amount (Rs.)

Page 175

Amount (Rs.)

Page 176

Amount (Rs.)

Page 177

Amount (Rs.)

Page 178

Amount (Rs.)

Page 179

Amount (Rs.)

Page 180

Amount (Rs.)

Page 181

Amount (Rs.)

Page 182

Amount (Rs.)

Page 183

Amount (Rs.)

Page 184

Amount (Rs.)

Page 185

Amount (Rs.)

Page 186

Amount (Rs.)

Page 187

Amount (Rs.)

Page 188

Amount (Rs.)

Page 189

Amount (Rs.)

Page 190

Amount (Rs.)

Page 191

Amount (Rs.)

Page 192

Amount (Rs.)

Page 193

Amount (Rs.)

Page 194

Amount (Rs.)

Page 195

Amount (Rs.)

Page 196

Amount (Rs.)

Page 197

Amount (Rs.)

Page 198

Amount (Rs.)

Page 199

Amount (Rs.)

Page 200

Amount (Rs.)

Page 201

Amount (Rs.)

Page 202

Amount (Rs.)

Page 203

Amount (Rs.)

Page 204

Amount (Rs.)

Page 205

Amount (Rs.)

Page 206

Amount (Rs.)

Page 207

Amount (Rs.)

Page 208

Amount (Rs.)

Page 209

Amount (Rs.)

Page 210

Amount (Rs.)

Page 211

Amount (Rs.)

Page 212

Amount (Rs.)

Page 213

Amount (Rs.)

Page 214

Amount (Rs.)

Page 215

Amount (Rs.)

Page 216

Amount (Rs.)

Page 217

Amount (Rs.)

Page 218

Amount (Rs.)

Page 219

Amount (Rs.)

Page 220

Amount (Rs.)

Page 221

Amount (Rs.)

Page 222

Amount (Rs.)

Page 223

Amount (Rs.)

Page 224

Amount (Rs.)

Page 225

Amount (Rs.)

Page 226

Amount (Rs.)

Page 227

Amount (Rs.)

Page 228

Amount (Rs.)

Page 229

Amount (Rs.)

Page 230

Amount (Rs.)

Page 231

Amount (Rs.)

Page 232

Amount (Rs.)

Page 233

Amount (Rs.)

Page 234

Amount (Rs.)

Page 235

Amount (Rs.)

Page 236

Amount (Rs.)

Page 237

Amount (Rs.)

Page 238

Amount (Rs.)

Page 239

Amount (Rs.)

Page 240

Amount (Rs.)

Page 241

Amount (Rs.)

Page 242

Amount (Rs.)

Page 243

Amount (Rs.)

Page 244

Amount (Rs.)

Page 245

Amount (Rs.)

Page 246

Amount (Rs.)

Page 247

Amount (Rs.)

Page 248

Amount (Rs.)

Page 249

Amount (Rs.)

Page 250

Amount (Rs.)

Page 251

Amount (Rs.)

Page 252

Amount (Rs.)

Page 253

Amount (Rs.)

Page 254

Amount (Rs.)

Page 255

Amount (Rs.)

Page 256

Amount (Rs.)

Page 257

Amount (Rs.)

Page 258

Amount (Rs.)

Page 259

Amount (Rs.)

Page 260

Amount (Rs.)

Page 261

Amount (Rs.)

Page 262

Amount (Rs.)

Page 263

Amount (Rs.)

Page 264

Amount (Rs.)

Page 265

Amount (Rs.)

Page 266

Amount (Rs.)

Page 267

Amount (Rs.)

Page 268

Amount (Rs.)

Page 269

Amount (Rs.)

Page 270

Amount (Rs.)

Page 271

Amount (Rs.)

Page 272

Amount (Rs.)

Page 273

Amount (Rs.)

Page 274

Amount (Rs.)

Page 275

Amount (Rs.)

Page 276

Amount (Rs.)

Page 277

Amount (Rs.)

Page 278

Amount (Rs.)

Page 279

Amount (Rs.)

Page 280

Amount (Rs.)

Page 281

Amount (Rs.)

Page 282

Amount (Rs.)

Page 283

Amount (Rs.)

Page 284

Amount (Rs.)

Page 285

Amount (Rs.)

Page 286

Amount (Rs.)

Page 287

Amount (Rs.)

Page 288

Amount (Rs.)

Page 289

Amount (Rs.)

Page 290

Amount (Rs.)

Page 291

Amount (Rs.)

Page 292

Amount (Rs.)

Page 293

Amount (Rs.)

Page 294

Amount (Rs.)

Page 295

Amount (Rs.)

Page 296

Amount (Rs.)

Page 297

Amount (Rs.)

Page 298

Amount (Rs.)

Page 299

Amount (Rs.)

Page 300

Amount (Rs.)

Page 301

Amount (Rs.)

Page 302

Amount (Rs.)

Page 303

Amount (Rs.)

Page 304

Amount (Rs.)

Page 305

Amount (Rs.)

Page 306

Amount (Rs.)

Page 307

Amount (Rs.)

Page 308

Amount (Rs.)

Page 309

Amount (Rs.)

Page 310

Amount (Rs.)

Page 311

Amount (Rs.)

Page 312

Amount (Rs.)

Page 313

Amount (Rs.)

Page 314

Amount (Rs.)

Page 315

Amount (Rs.)

Page 316

Amount (Rs.)

Page 317

Amount (Rs.)

Page 318

Amount (Rs.)

Page 319

Amount (Rs.)

Page 320

Amount (Rs.)

Page 321

Amount (Rs.)

Page 322

Amount (Rs.)

Page 323

Amount (Rs.)

Page 324

Amount (Rs.)

Page 325

Amount (Rs.)

Page 326

Amount (Rs.)

Page 327

Amount (Rs.)

Page 328

Amount (Rs.)

Page 329

Amount (Rs.)

Rate analsis Chapter No. 12 (Wood Work)

Documents