Rasching Super Rings-01

8/3/2019 Rasching Super Rings-01

1/26

Raschig Super-Ring

Product Bulletin 625

Superior performance by design

Raschig GmbH - Jaeger Products, Inc


2/26

Product Bulletin-625Page 1

TABLE OF CONTENTS

Raschig Jaeger Technologies 2

Raschig Super-Ring 3

Performance Data 4-5

Compensation for the decrease in 6volume for dumped packings

Pressure Drop 7-10

Transfer Efficiency 11-14

Height of a Transfer unit HTU OV 15-18

Liquid hold-up in columns 19-23

Concluding remarks 24


3/26

Raschig Jaeger Technologies September 2006

In order to establish a new alliance in mass transfer business RASCHIG GmbH and its parent companyPMC GLOBAL INC have acquired JAEGER PRODUCTS INC., a Houston Texas based company, which isa major manufacturer of tower packings, column internals and speciality trays and very active in the MassTransfer and Environmental Business.

RASCHIG JAEGER will be integrated into the PMC network of highly specialized, internationally operatingcompanies and will therefore be better prepared to meet increased globalization and further improvedcustomer orientation. Wherever in the world in all continents RASCHIG JAEGER is on the spot.

Synergies

This strategic acquisition combining RASCHIG and JAEGER into one larger group gives a great advantageto our customers giving them access to products of both entities in Europe, The Americas and in other partsof the world. It will create new dimensions in mass transfer technology. The advantages of our processengineering know-how and our technologies benefit even more the planning, modernization andconstruction of our clients processes. And: saving energy and investment cost is part of it.

The new alliance offers a diverse array of products to meet the mass transfer needs of the industries. Whilespecializing in high performance products, the comprehensive products line of RASCHIG JAEGER also

includes traditional fractional trays as well as structured and random packing types that best fit theapplication.

Leading In-house distributor test-facility

The company operates one of the largest in-house distributor test-facilities worldwide. Liquid distributorscan be tested up to 12m in diameter at a maximum liquid load of 2400m3 per hour.

All products of RASCHIG JAEGER are the result of consistent development work long years of experience.Comprehensive quality management in all stages of production and the principle of offering completesolutions are the basis of our excellent reputation worldwide.



4/26


Raschig Super-Ring

Aspects involved in the design of modern packing elementsPacking elements are successfully used in the chemical industry and related sectors, as well as inenvironmental protection installations, i.e. in absorption, desorption, extraction and rectification columns.The manifold process engineering demands on modern packing elements are determined by these thermalseparation processes.

High-performance packing elements are intended to bring about effective mass transfer between thephases flowing through the columns. Large interfacial area and uniform distribution of the phases over thecolumn cross-section are desirable. A high loading capacity permits high column throughputs, while lowpressure drop results in low operating costs.

Loading capacityCounter-current packed columns are preferably operated below, or in the immediate vicinity, of the so-called loading point, this being characterised by the fact that the falling film is backed up by the counter-current gas stream at higher loads. The loading point of a packing element is defined by its fluid dynamicproperties. Fluid dynamic studies in the past have repeatedly shown that the droplets forming in a columnpacking are entrained earlier than down-ward flowing liquid films at high gas loads. In contrast to previouspacking element designs, the Raschig Super-Ring meets this demand in that it was purposely designedwithout any projecting metal tongues which could act as dripping points.

Liquid and gas distributionThe most uniform possible distribution of the liquid and gas phase across the packing element itself and the

entire column cross-section is one of the fundamental prerequisites for a column packing that workseffectively. If, at the same time, a low resistance to fluid flow of the gas phase is to ensure the minimumpossible pressure drop, the structure must be largely open. The alternating wave structure of the RaschigSuper- Ring has not only created a form which is open on all sides but, at the same time, has also realiseda large number of contact points for homogeneous liquid and gas distribution.


5/26


Raschig Super-Ring

Mass transferEffective mass transfer between the phases demands not only a large interfacial area, but also the mostturbulent possible flow conditions and frequent renewal of the phase interfaces. With the Raschig Super-Ring, several thin films of liquid displaying turbulent flow are formed on the sinusoidal webs and areconstantly intermixed as the result of the recurrent contact points within the packing element.

Performance data of the Raschig Super-RingExperimental studies have confirmed the relationships described above. The following Figures show thepressure drop of the Raschig Super-Ring as a function of the gas capacity factor at various liquid loads. Asa result of a very open structure of the Raschig Super-Ring, the pressure drop of the dry packing is already

lower than that of a 50 mm metal Pall ring. The differences increases at higher liquid loads. The RaschigSuper-Ring generates also a substantially lower pressure drop than other high-performance packingelements made of metal with a nominal size of 50 mm.

The loading capacity of the Raschig Super-Ring can also been seen from the following Figures. TheRaschig Super-Ring not only has a higher loading capacity than the 50 mm metal Pall ring, but alsodisplays a substantially higher loading capacity than previous modern packing element designs.

The Figures show also the results of trials involving the absorption of ammonia from air in water. Theseparation efficiency of this new packing element is thus up to 14% better than that of a 50 mm metal Pallring or previous high-performance metal packing elements.

Furthermore, the low specific packing weight of the Raschig Super-Ring allows the design of low-costsupporting elements in the columns. The Raschig Super-Ring is also lighter than other packing elementdesigns, but without sacrificing stability. Experimental studies have shown that packing heights of 15 m andmore can be realised owing to the alternating wave frequency and amplitude of the metal webs of theRaschig Super-Ring.

The alternating wave structure additionally prevents entanglement of the packing element within thepacking, thus guaranteeing problem-free assembly and dismantling in a column. Owing to its openstructure, the Raschig Super-Ring is also suitable for liquids contaminated with solids. Table 1 shows thetechnical data of the Raschig Super-Ring.


6/26


Raschig Super-Ring

The alternating wave structure additionally prevents entanglement of the packing element within thepacking, thus guaranteeing problem-free assembly and dismantling in a column. Owing to its openstructure, the Raschig Super-Ring is also suitable for liquids contaminated with solids. Table 1 shows thetechnical data of the Raschig Super-Ring.

Table 1: Technical data of the Raschig Super-Ring's

961009,00055PlasticRaschig Super-Ring Nr. 2

9320654,00062PlasticRaschig Super-Ring Nr. 0.6

98804,300150MetalRaschig Super-Ring Nr. 3


9812013,100170MetalRaschig Super-Ring Nr. 1.5





Free Vol.

%

Surface

m2 /m3Number

pc./m 3Weight

Kg/m 3MaterialSize


7/26


Raschig Super-Ring

Compensation for the "decrease in volume"for dumped Packings

The values indicated in the tables for dumped packings are valid for a diameter ratio of the vessel to thepacking size of D/d = 20.

Since the arrangement of the packings is less compact near the vessel wall than in the interior of the bed,the number of packings per cubic meter increases with the diameter ratio.

The above diagram shows by which "allowance" the theoretically calculated vessel volume for diameterratios of more than 20 must be increased in order to completely fill the space required.

If the plastic or metal packings are, for instance, thrown into the column, this may result in a furtherdecrease in volume due to abnormally compact packing.

D = diameter of the vessel to be filledd = diameter or nominal size of the packings

12

10

8

6

4

2

0

Diameter ratio D/d

Allowance for compensation of decrease in volume

20 30 40 50 60 70 80 90 100 110 120


8/26

1.00.3 0.4 0.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0 6.0

Gas capacity factor F V [Pa1/2

]

10

100

1000

20

30

40

50

60

708090

200

300

400

500

600

700800900

2000

S p e c i f i c p r e s s u r e d r o p p / H [ P a / m ]

Liquid load u L in (m3 /m2h)

uL= 2 0

1 0

0

Raschig Super-Ring No. 0.3 made of metal

3 0

4 0

1.00.3 0.4 0.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0 6.0


]

10

100

1000

20

30

40

50

60

708090

200

300

400

500

600

700800900

2000


Liquid load u L in (m3 /m2h) uL= 2 0 1 0 0


3 0

4 0

RASCHIG SUPER-RING No. 0.3

Column diameter: 0.288 mPacking height: 1.0 m




Pressure drop of metal

RASCHIG SUPER-RINGSsystem: air / water


9/26



RASCHIG SUPER-RING No. 1


1.00.3 0.4 0.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0 6.0


]

10

100

1000

20

30

40

50

60

708090

200

300

400

500

600

700800900

2000



uL= 2 0

1 0

0


3 0

4 0

1.00.3 0.4 0.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0 6.0


]

10

100

1000

20

30

40

50

60

708090

200

300

400

500

600

700800900

2000



uL= 2 0

1 0

0

Raschig Super-Ring No. 1 made of metal

3 0

4 0





10/26





1.00.3 0.4 0.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0 6.0


]

10

100

1000

20

30

40

50

60

708090

200

300

400

500

600

700800900

2000



uL= 3 4

. 0

2 2

. 6

0


4 5

. 3

6 7

. 9

1 1 3

. 2

1 3 5

. 8

9 0

. 5

1 5 8

. 4

1.00.3 0.4 0.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0 6.0


]

10

100

1000

20

30

40

50

60

708090

200

300

400

500

600

700800900

2000



uL= 2 0

1 0

0


3 0

4 0





11/26





1.00.3 0.4 0.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0 6.0


]

10

100

1000

20

30

40

50

60

708090

200

300

400

500

600

700800900

2000



2 0

1 0

0


3 0

4 0

6 0

8 0

1 0 0

1 1 3

uL=

1.00.3 0.4 0.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0 6.0


]

10

100

1000

20

30

40

50

60

708090

200

300

400

500

600

700800900

2000



uL= 2 0

1 0

0

Raschig Super-Ring No. 2 made of plastic

3 0

4 0


Pressure drop of metal and plastic



12/26





10 20 30 40 505

Liquid load u L [m/mh]

0.01

0.02

0.03

0.04

0.005

0.015

0.025

0.035

L

a P h

[ 1 / s ]

Gas capacity factor Fv = 1.8 Pa 0.5

Raschig Super-Ring Nr. 0.3 made of metal

10 20 30 40 505


0.01

0.02

0.03

0.04

0.005

0.015

0.025

0.035

L

a P h

[ 1 / s ]


Raschig Super-Ring Nr. 0.5 made of metal


Transfer efficiency of metal

RASCHIG SUPER-RINGSin the desorption of CO 2 from water into anatmospheric air-stream


13/26





10 20 30 40 505


0.01

0.02

0.03

0.04

0.005

0.015

0.025

0.035

L

a P h

[ 1 / s ]



10 20 30 40 505


0.01

0.02

0.03

0.04

0.005

0.015

0.025

0.035

L

a P h

[ 1 / s ]


Raschig Super-Ring Nr. 1 made of metal





14/26





10 20 30 40 505


0.01

0.02

0.03

0.04

0.005

0.015

0.025

0.035

L

a P h

[ 1 / s ]



10 20 30 40 505


0.01

0.02

0.005

0.015

L

a P h

[ 1 / s ]







15/26


16/26


17/26

RASCHIG SUPER-RING No.0.7


1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0

Gas capacity factor F v [Pa1/2 ]

0.1

0.2

0.3

0.4

H T U

o v

[ m ]

Liquid load u L = 10 m3 /m2h


1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0


0.1

0.2

0.3

0.4

0.5

0.6

0.7

H T U

o v

[ m ]






Height of a transfer unit HTU OV for metal

RASCHIG SUPER-RINGSfor the absorption of NH 3 from air in water in theGaseous phase


18/26





1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0

Gas capacity factor Fv

[Pa 1/2 ]

0.1

0.2

0.3

0.4

0.5

0.6

0.7

H T U

o v

[ m ]



1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0


0.1

0.2

0.3

0.4

0.5

0.6

0.7

H T U

o v

[ m ]




Height of a transfer unit HTU OV for metal



19/26

1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0


0.2

0.3

0.4

0.5

0.6

0.7

H T U

o v

[ m ]



1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0


0.1

0.2

0.3

0.4

0.5

0.6

0.7

H T U

o v

[ m ]








Height of a transfer unit HTU OV for metal and plastic



20/26

1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0


0.01

0.10

0.02

0.03

0.04

0.050.060.070.08

0.20

L i q u i d h o l d - u p h

L [ m

3 / m

3 ]


Liquid load u L in (m3 /m2h) uL=

10

203040

1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0


0.01

0.10

0.02

0.03

0.04

0.050.060.070.08

0.20


L [ m

3 / m

3 ]



uL= 10203040






Liquid hold-up in columns with metal



21/26

1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0


0.01

0.10

0.02

0.03

0.04

0.050.060.070.08

0.20


L [ m

3 / m

3 ]


Liquid load u L in (m3 /m2h) uL=

10

203040

1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0


0.01

0.10

0.02

0.03

0.04

0.050.060.070.08

0.20


L [ m

3 / m

3 ]



uL= 10203040






RASCHIG SUPER-RINGS


system: air / water


22/26

1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0


0.01

0.10

0.02

0.03

0.04

0.050.060.070.08

0.20


L [ m

3 / m

3 ]



uL=

10

20

30

40

1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0

Gas capacity factor F v in Pa1/2

0.01

0.10

0.02

0.03

0.04

0.050.060.070.08

0.20


L i n m

3 / m

3



uL=

10

20

3040






RASCHIG SUPER-RINGS


system: air / water


23/26

1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0


0.01

0.10

0.02

0.03

0.04

0.050.060.070.08

0.20


L i n m 3 / m

3



uL=

10

20

30

40

1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0


0.01

0.10

0.02

0.03

0.04

0.05

0.06

0.070.08

L i q u i d h o l d - u o h

L i n m

3 / m

3



uL=

10

20

30

40






RASCHIG SUPER-RINGS


system: air / water


24/26

1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0


0.01

0.10

0.02

0.03

0.04

0.05

0.06

0.070.08


L i n m

3 / m

3



uL=

10

20

30

40

1.00.5 0.6 0.7 0.8 2.0 3.0 4.0 5.0Gas capacity factor F v in Pa

1/2

0.01

0.10

0.02

0.03

0.04

0.050.060.070.08

0.20


L i n m

3 / m

3



uL=

10

20

30

40






RASCHIG SUPER-RINGS

Liquid hold-up in columns with metal and plastic

system: air / water


25/26


Concluding Remarks

The Raschig Super-Ring demonstrates that this high-performance packing element meets the numerousdemands of process engineering in an outstanding manner. The above description illustrates that a modernpacking element design today must fulfil a number of fluid dynamic conditions. This is particularly truebecause, in most applications, only a fraction of the surface of a filling material is wetted and used for masstransfer between the phases. However, unused surfaces can easily corrode or generate unnecessarypressure drop. The Raschig Super-Ring offers decisive advantage in this context, as its surface utilisationhas been optimised in terms of process engineering.


26/26

100 General Product Information

200 Metal Random - RSR

300 Mist Eliminators Wire Mesh

400 Fractionation Trays and Hardware

450 High Capacity Nye Trays

475 High Capacity CoFlo Trays

500 Metal Structured Packing RSR

525 Metal Structured Packing - MaxPak

550 Plastic Structured Packing RSP

RASCHIG JAEGER TECHNOLOGIESMundenheimer Strasse 10067061 Ludwigshafen - GermanyPhone: +49.62.5618-602 Fax: +49.621.5618-604email: [email protected] www.raschig.com

Jaeger Products, Inc.1611 Peachleaf StreetHouston, TX 77039Phone: 281.449.9500 Fax: 281.449.9400800.678.0345 www.jaeger.com

Locations / Production Sites

Ludwigshafen and Espenhain,Germany

Houston, TexasEl Dorado, KansasAnd Monterrey, Mexico.

Furthermore we co-operate with reliable partners all over the world

600 Plastic Random Jaeger Tri-Pack/Hackentten

625 Plastic Random RSR

650 Plastic Random LPR

675 Plastic Random Nor Pak

700 Plastic Random Rings and Saddles

800 Ceramic Random Packing

900 Winsorp Software

1000 Process Information

1100 Column Internals

1200 Reactor Internals

Rasching Super Rings-01

Documents