RAPID TEST, DESIGNED FOR THE DETECTION OF MALARIA ( 4 plasmodium) Toda Malariadiag 4+®
Feb 25, 2016
RAPID TEST, DESIGNED FOR THE DETECTION OF MALARIA ( 4 plasmodium)
Toda Malariadiag 4+®
PROVIDED MATERIAL
10 Cassettes individually packed in aluminium pouch containing dessicant bag 1 dropper vial containing the lysis bufferNotice d’utilisation1 instruction for use
Avantages du Toda Malariadiag4+®
Use: simple, direct levy on the test Fast: Result in 20 minutes Ambient temperature storage Reliability:
Specificity : P. falsiparum: 100,0% Sensitivity P. falsiparum: 95,9%
Long expiration life: until 18 months
Test Procedure
Fig.1:
Clean the sampling area (side of the third orthe fourth finger) with an antiseptic
solution.
Test Procedure
Fig.2:
Remove the protective cover by turning and twisting in one movement.
Test Procedure
Fig.3:
Position it against puncture site. Hold it between fingers and press colored button firmly with thumb
to activate. Do not pull away from site until after activation. Collect specimen.
Test Procedure
Fig.4:
Massage the finger in order to make come out a drop of blood. Put the edge of the strip in contact
with the drop of blood. The drop should be placed in the center of the open zone on the absorbent
pad.
Test Procedure
Fig.5 :
Place the cassette on a flat surface and then add four drops of lysis bu er in the well. Readthe result after 20 minutes from the time the
buffer is dropped.
Wait 20 minutes
Positive résult
POSITIVE: 3 purple stripes appears
POSITIVE FOR OTHER SPECIES : 2 purple stripes appears
Négative and not significant résultsNEGATIVE :
Only one stripe appears in the area C.
NOT SIGNIFICANT : Absence of purple stripe in the control area C. The procedure was notcorrectly followed or the test was damaged. run the procedure again with a new device.