RADWIN IDU-SRADWIN IDU-S supports up to 540Watt PoE output (up to 90W per PoE for high capacity radio units) and up to 14Gbps full duplex traffic for connected radios. Auto negotiation

Layer 2 indoor switch

RADWIN IDU-S is a managed Ethernet switch with full Layer 2 switching capabilities and high-power budget, improving operational efficiency and assuring ease of use when using RADWIN’s PtP and PtMP radios*.

The IDU-S serves as a single indoor unit, providing data aggregation and power feeding multiple RADWIN base stations or CPEs (backhaul) on the tower, eliminating the need for additional 3rd party equipment.

RADWIN IDU-S supports up to 540Watt PoE output (up to 90W per PoE for high capacity radio units) and up to 14Gbps full duplex traffic for connected radios. Auto negotiation supports up to 2.5GbE.

RADWIN IDU-S

*Excluding: HBS SFF, HSU SFF, GSU and RADWIN 2000A/A+

Dual DC Inputs Console Port100M/1G/2.5G

PoE Ports10M/100M/1G

PoE Ports 1G SFP Ports1G/10G

SFP+ ports

Mechanical Overview

Main Networking Features

IDU-S is highly flexible, enabling connectivity of 4 RADWIN base stations (including the JET DUO series) through 4 PoE ports, providing up to 2.5Gbps throughput per port. Also available, 2 additional PoE ports of 1GbE that can connect 2 radios or other devices such as such as CCTV cameras, a UPS/Controller and more.

In addition, IDU-S seamlessly integrates with the customer’s 10Gbps fiber optics backbone, including monitoring via WINManage NMS.

» VLAN: Up to 4K VLANs; 802.1q and 802.1ad Q-in-Q tagging

» Link Aggregation supporting: 802.3ad + LACP

» Spanning Tree: STP (802.1d), RSTP (802.1w), MSTP (802.1s)

» QoS based L3 (DiffServ) or L2 (802.1p) & scheduling based WRR, Strict & Hybrid

» IGMP snooping: V2/V3 and IPv6 MLD

» Security features: Radius, HTTPS & SSL, ACL & 802.1x

» Management: CLI/SSH, WEB UI, FTP/FTPS, DHCP, LLDP, NTP & SNMPv1/2c/3

Typical IDU-S use cases

Use case 1 - Base station connectivity in hub sites

4 X JET BS series VLAN trunk (802.1q or Q-in-Q) In-band management of the BS

SYS

P1

1

2 4

32.5G Ports 1G Ports

10G Ports

IDU-SP1- +

- +

P2

P2

48V-57V DC 10A

LNKACTSPD

PoE

5

5 5 6 7 8 9 10

Up to 2X 10G SFP + (Support 2 backbones)VLAN trunk (802.1q or Q-in-Q)

PTZ camera 802.3af/at/bt

Backbone Switch / Router #2Backbone Switch / Router #1Can also be used to integrate additional devices in the hub site

Controller / UPS / etc.

Use case 2 - Dual fiber backhaul

Backbone Switch / Router

4 X JET BS series VLAN trunk (802.1q or Q-in-Q) In-band management of the BS

SYS

P1

1

2 4

32.5G Ports 1G Ports

10G Ports

IDU-SP1- +

- +

P2

P2

48V-57V DC 10A

LNKACTSPD

PoE

5

5 5 6 7 8 9 10 Up to 2X 10G SFP+Option 1: Link aggregation (one backbone device)Option 2: Spanning tree (two backbone devices)VLAN trunk (802.1q or Q-in-Q)

10G fiber ring via SFP+Spanning treeVLAN trunk (802.1q or Q-in-Q) Backbone

Switch

Use case 3 - Fiber ring topology

4 X JET BS series VLAN trunk (802.1q or Q-in-Q) In-band management of the BS

SYS

P1

1

2 4

32.5G Ports 1G Ports

10G Ports

IDU-SP1- +

- +

P2

P2

48V-57V DC 10A

LNKACTSPD

PoE

5

5 5 6 7 8 9 10

SYS

P1

1

2 4

32.5G Ports 1G Ports

10G Ports

IDU-SP1- +

- +

P2

P2

48V-57V DC 10A

LNKACTSPD

PoE

5

5 5 6 7 8 9 10

RADWIN Ltd Corporate Headquarters+972.3.766.2900 | [email protected]

www.radwin.comThe RADWIN name is a registered trademark of RADWIN Ltd. Specifications are subject to change without prior notification. © All rights reserved, May 2020

» Data aggregation » 540W total PoE budget » 90Watt per PoE port » 4x PoE up to 2.5G » 2x combo ports up to 1G (PoE or SFP) » 2x 1G SFP ports » 2 x 10/1GbE uplink SFP + ports » Dual DC power input (redundancy) » HTTP/S web GUI and Telnet/SSH CLI for remote management » Console port for local management

IDU-S Highlights

» Size: 22(w) x 4.5(h) x 24(d) cm » Weight: 2.5 kg / 5.51 lbs » Operating temperatures: 0°C to 45°C / 32°F to 113°F » Installation: indoor » Optional accessories: AC/DC PS, SFP/SFP+ transceivers

Product information