Top Banner
Rabbit Husbandry and Management
55

Rabbit Husbandry and Management. Identification All adult rabbits should be identified individually. The most common identification method is an ear.

Dec 16, 2015

Download

Documents

Jaylen Bodie
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Rabbit Husbandry and

Management

Page 2: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Identification

All adult rabbits should be identified individually.

The most common identification method is an ear tattoo.

A permanent number is tattooed on the central groove inside the pinna, where the number is easy to see

Page 3: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Ear clip

Another acceptable method of identification is an ear clip that contains a unique identification number. A disadvantage of ear tags is that they may cause a local infection that will not heal until the tag is removed

Page 4: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

CAGINGCage interior Adult rabbits are housed

individually, preferably in cages made of stainless steel. The sides are perforated or made of fine wire mesh to provide circulation, and the front door should allow visualization of the animal.

Page 5: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Cage A mature animal weighing 4 - 5.4 kg

requires 4 sq feet, and an animal heavier than 5.4 kg requires 5 sq ft. The USDA, which enforces the Animal Welfare Act regulations, may require more spacious cages than stated in the Guide, and it is important for all facilities subject to USDA inspection to comply with their standards.

Page 6: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Racks of cages

Rabbit cages can be tiered to utilize vertical space within the room. The room, however, should not contain any other animal species. In addition, it is wise to house rabbits where they cannot hear noisy species, such as dogs and nonhuman primates, as they are disturbed by intermittent loud noises

Page 7: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Housing Good ventilation in the room is important

as it supplies oxygen; ventilation dilutes accumulations of ammonia caused by evaporating urine; removes heat generated by the animal's respiration, lights, and equipment; and carries away airborne hair

Page 8: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Temperature / Humidity Rabbits can tolerate a reasonably wide

fluctuation in room temperature; but because of their very dense hair coats, they are susceptible to overheating.

Their most comfortable environment is a temperature between 60.8° and 69.8°F with a humidity level of 40 - 60%.

Page 9: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Light A cycle of 12 hours of

light and 12 hours of darkness is satisfactory for routine housing of rabbits, but increasing the light period to 16 hours, with 8 hours of darkness, facilitates breeding activity

Page 10: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

NutritionHerbivoresDaily food intake: 5gm/100gm BW/dayDaily water intake: 5-10 mls/100gm BW/dayDaily urine output: 50-90 mls/day

Page 11: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Nutrition (cont) Cecotropes:

Special feces eaten directly from anus, then digestedNot waste materials – rich in organisms from cecumContains nutrients:Amino acidsFatty acidsVitamin

Should not see these droppings on bottom of cageAppearance: elongated, green, coated with mucous, strong odor

Page 12: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Pellet diet Under natural conditions, rabbits normally

live on green herbage nutrients and other plant material.

However, in a laboratory setting they are normally fed a pelleted diet that contains 14 - 19% crude protein, not less than 1.5% fat, and 16 - 25% crude fiber

Page 13: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Nutrition (cont)Commercially prepared pelleted diet

Ad lib or restricted

Grass Hay – very importantRich in vitamins, minerals and proteinsTypes available:

Timothy grass Meadow grassOat grassRye grassBarley grassBermuda grass

Page 14: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Nutrition (cont)

Fat rabbits do not breedRabbits that do not breed become fatExcessive Vit A and/or D can lead to toxicity

- Reluctant to move and anorexic

Page 15: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Acid treatment

An acid solution should be used on all surfaces, as necessary, to dissolve solidified particulate matter that results from rabbit urine. This is followed by thorough rinsing.

Page 16: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Restraint

Page 17: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Pick Up Grasp by scruff

with one hand Support Hind

quarters with other hand

NEVER Pick up by ears Let rear legs

dangle

Page 18: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Removing the rabbit from its cage

With your dominant hand, firmly grasp the rabbit by the scruff of fur behind its neck

Have the rabbit face the back of the cage

Lift gently by the scruff Scoop under the

hindquarters with your other hand and remove the rabbit from its cage

Page 19: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Replacing the rabbit into its cage Using the restraint

described before, gently place the rabbit into its cage, facing toward the back

Place the hind feet down first

If the rabbit takes off, it will run toward the back of its cage

Page 20: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

General transport techniques

Scruff the rabbit by its neck

Place the rabbit's head under your arm (armpit)

Allow the rabbit's body to lie on your lower arm and spread your fingers on either side of the tail, supporting the hindquarters

Place the hand of your upper arm on the dorsal surface of the rabbit to maintain control

Page 21: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Flying bunny" transport

This method is used for aggressive and hard-to-handle rabbits

Scruff the rabbit's neck with one hand and grab the skin over the hindquarters with your other hand

While lifting, rotate your fists inward, gently arching the rabbit's back

Hold firmly-  the rabbit may struggle and you don't want to drop it or allow it to hurt itself

Page 22: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Wiggly RabbitsBunny burritoRabbit

restraint devices

Cat bag

Page 23: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Hypnotism Method- Firmly scruff the rabbit's neck with your

dominant hand Cross your nondominant hand underneath to

scruff the rump Invert the rabbit onto its back-

Roll the rabbit onto its rump Quickly lie it on its back Transfer your hand from the rump to the

abdomen Keep the rabbit's spine and head straight

Gently stroke the rabbit's abdomen (the nictitating membrane- 3rd eyelid- should move over the pupil when the rabbit is hypnotized

Check the pedal reflex by pinching the toes-  a properly hypnotized rabbit won't move

To end the hypnotism, slowly and gently sit the rabbit on its rump and then onto its feet

Page 24: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Towel wrap  (bunny burrito)

Place the rabbit on an opened towelSnuggly wrap the towel around the rabbit's bodyGently pull out the part you need to work on

IMPORTANT:  ensure that the rabbit has proper ventilation when using this restraint.  Rabbits overheat readily, so constant monitoring is essential!!

Page 25: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Cat bag-

A nylon bag made for restraining cats may be useful for rabbits.  Unzipping the appropriate zipper makes the needed body parts readily accessible

Page 26: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Restraint boxes

Several different types of restraint boxes specifically made to hold rabbits are commercially available.  It is imperative that the box properly fit the size of the rabbit that you are working with in order to avoid injury to the rabbit.

Page 27: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Venipuncture 20 to 25 g needle of suitable length with

syringe. (A short bevel needle not more than 1 inch long and a syringe of 5 ml capacity or less is recommended.)

Butterfly infusion sets also work well

Page 28: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Venipuncture Venipuncture of rabbit

lateral saphenous vein Rabbit jugular stick

You can use the lateral saphenous vein or jugular vein to obtain blood from a rabbit.

Page 29: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

The marginal ear vein is NOT recommended;  if a thrombus forms in this vein, it can lead to sloughing of the ear pinna.

Use the central artery

Page 30: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

IM- Lumbar muscles

Intramuscular injections may be given into the lumbar muscles on either side of the backbone, or into the large muscle groups in the back leg, either anterior or posterior to the femur

Page 31: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.
Page 32: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Grooming Nail Trimming: The nails of rabbits can be

trimmed, just like the nails of dogs and cats.  It is very useful to trim the sharp tips of the nails of rabbits that struggle or are aggressive.

The screws of a guillotine-type nail trimmer should face the rabbit, and your fingers should move the hinged part of the handle;  the stationary side of the handle should be placed against your thumb.

Page 33: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

It is easy to see the blood vessels (called the "quick") that are located in the nail.  It is important not to cut the quick, because bleeding and pain will occur.  Use the trimmers to cut the sharp tip that extends beyond the quick. 

 If bleeding does occur, apply a silver nitrate stick to the quick until bleeding ceases  (this is painful, because nerves have been exposed, so be as gentle as possible.

Page 34: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Physical Examination:

Research animals must be maintained in a health condition for experimental results to be valid.

Look at the rabbit in its cage BEFORE you open the door of the cage.

Initial examination- The initial exam should be performed before the rabbit has been handled extensively (i.e. before it's excited).

Page 35: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Observe the general appearance of the rabbit and how it has been cared for.  Does it look well-cared for, unthrifty (with poor hair coat and sunken eyes) or over- or underweight?

Describe the rabbit's attitude:  is it BAR (bright, alert and responsive), QAR  (quiet, alert and responsive), depressed, lethargic, excited or aggressive?

Page 36: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Weight

Changes in an animal's weight are an easy way to monitor its overall health. Gently place the rabbit on the scale and weigh itRecord the weight to kilograms

Page 37: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Vital signs

Along with body weight, the vital signs--temperature, pulse rate and respiratory rate-- are important parameters used to monitor the health of an animal.  These values should be obtained early in an exam, before the animal becomes excited.

Temperature.– 101.3º-104º Heart rate.- 130-325 beats per minute Respiratory rate.- 30-60 breaths per minute

Page 38: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Pulse - Respiratory rate Place your index finger on

the medial (inside) thigh over the femoral artery.  Palpate (feel for) a slight groove and apply gentle pressure until you feel the pulse.

Watch the sides of the rabbit or listen with a stethoscope to the animal's breath. 

Page 39: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Systems Examination:

When performing a physical examination, it is essential that the entire animal be evaluated in a systematic manner.  You should examine the rabbit from its nose to its tail.  Develop a routine and follow the same pattern every time that you perform an exam, and you will be less likely to overlook a problem. 

Page 40: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Restraint for Physical Exam One handed

palpation-Hold with forearm and tuck into abdomen

Two handed palpation- tuck hindquarter into abdomen and face nose away

Page 41: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Review http://www.bva-awf.org.uk/resources/tutorials/BVA08-Rabbit

/Rabbit.html

Page 42: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

CHEMICAL RESTRAINT

INJECTABLE ANESTHESIA

Page 43: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

XYLAZINE/KETAMINE/MEDETOMIDINE

Short duration of action (25-45 minutes) Ketamine: 30-40 mg/kg + Xylazine: 3-5 mg/kg

IM Ketamine: 25 mg/kg + Medetomidine 0.5

mg/kg IM Page 212

Page 44: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

TILETAMINE-ZOLAZEPAM For minor surgical procedures Dose

Rabbtis: 7.5 mg/kg IM Can have prolonged recovery Used in combination with xylazine

Decrease dose Better effect and faster recovery

Page 45: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

INHALANT ANESTHESIA Use for any major surgical procedure Induce with gas alone or with injectable

anesthetics Isoflurane is the agent of choice

Page 46: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

BREEDING AND REPRODUCTION

Page 47: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Maturation The sexual development

of a rabbit is strongly dependent on breed, sex, nutrition, and season of birth.

In the small and medium breeds of rabbits, females are sexually mature and ready for breeding at 4-1/2 to 5 months.

The larger breeds are not ready until 8 or 9 months of age, with the bucks maturing approximately one month later than the does.

Page 48: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Reproduction (cont)Copulation:

Take doe to buck’s cageVery fastBuck screams and falls over backward when done

Kindling = parturitionSplit parturition can occur – up to 3 daysBabies – “bunnies” or “kits”No postpartum breeding

Page 49: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Reproductive behaviors

In breeding colonies, one buck is maintained for 8 -12 does. The doe is usually taken to the buck's cage and left for 5 - 30 minutes. Mating normally occurs rapidly; however the buck may display a form of courtship behavior that includes rapid circling around the female, elevating his hind quarters, walking stiff-legged, and laying his tail flat down against his back or flagging it

Page 50: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Reproduction (cont)

Do not touch bunnies for 3 days after birthCannibalism does occur

Young doesExcitement, thirst, malnutrition

Pseudopregnancy commonSterile matingsExcitement by nearby buckMounting by other doesSigns: nest building, mammary enlargement

Page 51: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Pregnancy If the doe is receptive and the buck is

experienced, copulation occurs rapidly, and she will normally ovulate 10 - 13 hours after mating. Eighty percent of matings will result in pregnancy, which can be confirmed by marble-sized uterine swellings that can be palpated through the abdominal wall by the 12 - 14th day of gestation.

Page 52: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Nest box

A nest box should be provided for the pregnant doe as a secluded place for kindling, or giving birth. Nest boxes vary in size, but in general measure 18 - 22" long, 11 -12" wide, 12" high at the back and 9" high at the front. Hay, straw, or some other form of nesting material should be provided.

Several days prior to parturition, the doe will carry the nesting material into the nest box and mix it with fur plucked from her body to form a nest. The nesting box can be removed when the young are 3 weeks of age.

Page 53: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Newborn After a 31 - 32 day gestation

period, the doe will normally give birth to a litter of 7 or 8 young, weighing 40 - 60 grams each.

They are hairless for 4 days, have closed eyelids for 7 days, and are poikilothermic; i.e., unable to control their body temperature, for 7 days or more.

The doe will normally nurse them for approximately ten minutes in the early morning, and then leave the nest alone

Page 54: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Reproduction (cont)Kits – Eyes open 7-10 days

Begin solid food at 3 weeksWean at 4-6 weeks

Lactation – milk very richNurse 2-3 times daily as petsWild - nurse only once a day

Page 55: Rabbit Husbandry and Management. Identification  All adult rabbits should be identified individually.  The most common identification method is an ear.

Juveniles In most commercial

production systems, the young are separated from the doe at about 4-1/2 weeks.

Does are usually rebred 6 - 8 weeks after kindling, when the young are weaned, but they can be mated 15 days after parturition