This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
This documentation contains proprietary information of Oracle Corporation. It is provided under a license agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. If this documentation is delivered to a U.S. Government Agency of the Department of Defense, then it is delivered with Restricted Rights and the following legend is applicable:
Restricted Rights Legend
Use, duplication or disclosure by the Government is subject to restrictions for commercial computer software and shall be deemed to be Restricted Rights software under Federal law, as set forth in subparagraph (c)(1)(ii) of DFARS 252.227-7013, Rights in Technical Data and Computer Software (October 1988).
This material or any portion of it may not be copied in any form or by any means without the express prior written permission of the Education Products group of Oracle Corporation. Any other copying is a violation of copyright law and may result in civil and/or criminal penalties.
If this documentation is delivered to a U.S. Government Agency not within the Department of Defense, then it is delivered with “Restricted Rights,” as defined in FAR 52.227-14, Rights in Data-General, including Alternate III (June 1987).
The information in this document is subject to change without notice. If you find any problems in the documentation, please report them in writing to Worldwide Education Services, Oracle Corporation, 500 Oracle Parkway, Box SB-6, Redwood Shores, CA 94065. Oracle Corporation does not warrant that this document is error-free.
Oracle and all references to Oracle Products are trademarks or registered trademarks of Oracle Corporation.
All other products or company names are used for identification purposes only, and may be trademarks of their respective owners.
Authors
Vic Mitchell, Dee Fairbanks Simpson
Technical Contributors and Reviewers
Marilyn Montgomery, Barbara Nicholls, Barbara Snyder, Sharon Tennier, Vera Reyna
This book was published using: oracletutor
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Guided Demonstration - Oracle Integration Repository ............................................................................1-3 Practice - Create A New Employee and User ............................................................................................1-4 Solution - Create A New Employee and User ...........................................................................................1-5 Practice - Set Yourself Up As a Buyer ......................................................................................................1-9 Guided Demonstration - Run the Fill Employee Hierarchy Process .........................................................1-11 Practice - Create a Location.......................................................................................................................1-12 Solution - Create a Location ......................................................................................................................1-13 Practice - Create an Inventory Organization..............................................................................................1-16 Solution - Create an Inventory Organization .............................................................................................1-17 Practice - Define a Unit of Measure ..........................................................................................................1-22 Solution - Define a Unit of Measure..........................................................................................................1-23 Practice - Create a Purchasing Category....................................................................................................1-27 Solution - Create a Purchasing Category ...................................................................................................1-28 Practice - Create Purchasing Items ............................................................................................................1-33 Solution – Create Purchasing Items...........................................................................................................1-34 Practice - Create a Supplier With Two Sites .............................................................................................1-37 Solution - Create a Supplier With Two Sites.............................................................................................1-38 Guided Demonstration - Create a Position (Optional)...............................................................................1-50 Guided Demonstration - Add the Position to the Hierarchy ......................................................................1-51 Guided Demonstration - Create Approval Groups ....................................................................................1-52 Guided Demonstration - Create Approval Group Assignments ................................................................1-53 Practice - Set Up Document Routing and Approval ..................................................................................1-54 Solution - Set Up Document Routing and Approval .................................................................................1-55 Practice - Create a Supplier List ................................................................................................................1-66 Solution - Create a Supplier List................................................................................................................1-67 Practice - Create a Catalog RFQ................................................................................................................1-68 Solution - Create a Catalog RFQ ...............................................................................................................1-70 Practice - Create a Catalog Quote from an RFQ........................................................................................1-77 Solution - Create a Catalog Quote from an RFQ.......................................................................................1-79 Practice - Create an Approved Supplier List Status...................................................................................1-84 Solution - Create an Approved Supplier List Status ..................................................................................1-85 Practice - Require an Approved Supplier for an Item................................................................................1-87 Solution - Require an Approved Supplier for an Item ...............................................................................1-88 Practice - Create an Approved Supplier List .............................................................................................1-90 Solution - Create an Approved Supplier List.............................................................................................1-92 Practice - Understand ASL Precedence .....................................................................................................1-97 Practice - Create a Sourcing Rule and a Sourcing Rule Assignment.........................................................1-103 Solution - Create a Sourcing Rule and a Sourcing Rule Assignment ........................................................1-105 Practice - Enable Automatic Document Sourcing .....................................................................................1-111 Solution - Enable Automatic Document Sourcing.....................................................................................1-112 Practice - Create a Purchase Requisition ...................................................................................................1-114 Solution - Create a Purchase Requisition...................................................................................................1-115 Practice - Create a Requisition Template...................................................................................................1-118 Solution - Create a Requisition Template..................................................................................................1-119 Practice - Use the Supplier Item Catalog to Create a Requisition .............................................................1-122 Solution - Use the Supplier Item Catalog to Create a Requisition.............................................................1-123 Practice - Create Internal Requisitions ......................................................................................................1-127 Solution – Create Internal Requisitions .....................................................................................................1-128 Practice - Create a Standard Purchase Order .............................................................................................1-133 Solution - Create a Standard Purchase Order.............................................................................................1-135
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
R12 Oracle Purchasing Fundamentals Table of Contents ii
Practice - Create a Blanket Purchase Agreement and Blanket Release .....................................................1-148 Solution - Create a Blanket Purchase Agreement and Blanket Release ....................................................1-150 Practice - Create a Contract Purchase Agreement .....................................................................................1-160 Solution - Create a Contract Purchase Agreement.....................................................................................1-161 Practice - Return a Requisition ..................................................................................................................1-167 Solution - Return a Requisition .................................................................................................................1-169 Practice - AutoCreate a Purchase Order ....................................................................................................1-173 Solution - AutoCreate a Purchase Order....................................................................................................1-174 Practice - Create Releases using the Create Releases Program .................................................................1-177 Solution - Create Releases using the Create Releases Program.................................................................1-180 Practice - Automatically Create a Standard Purchase Order based on your Quotation .............................1-188 Solution - Automatically Create a Standard Purchase Order based on your Quotation.............................1-190 Guided Demonstration - Introduce the Buyer's Work Center....................................................................1-195 Practice - Create a Personalized Requisition View....................................................................................1-197 Solution - Create a Personalized Requisition View...................................................................................1-198 Guided Demonstration - Creating and Using Document Styles ................................................................1-200 Practice - Create a Purchase Order in the Buyer's Work Center................................................................1-201 Solution - Create a Purchase Order in the Buyer's Work Center ...............................................................1-202 Practice - Create a Purchase Agreement in the Buyer's Work Center .......................................................1-205 Solution - Create a Purchase Agreement in the Buyer's Work Center.......................................................1-206 Practice - Create a Standard Receipt..........................................................................................................1-211 Solution - Create a Standard Receipt .........................................................................................................1-213 Practice - Create an Express Receipt .........................................................................................................1-215 Solution - Create an Express Receipt.........................................................................................................1-217 Practice - Create a Cascade Receipt ..........................................................................................................1-220 Solution - Create a Cascade Receipt..........................................................................................................1-222 Practice - Inspect and Deliver a Receipt ....................................................................................................1-225 Solution - Inspect and Deliver a Receipt ...................................................................................................1-227
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
R12 Oracle Purchasing Fundamentals Table of Contents iii
Preface
Profile
Before You Begin This Course
Before you begin this course, you should have the following qualifications:
• Thorough knowledge of Oracle Applications
• Working experience with procurement
Prerequisites
• Oracle Applications Foundations
How This Course Is Organized
R12 Oracle Purchasing Fundamentals Ed 2 is an instructor-led course featuring lecture and hands-on exercises. Online demonstrations and written practice sessions reinforce the concepts and skills introduced.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
R12 Oracle Purchasing Fundamentals Table of Contents v
Typographic Conventions
Typographic Conventions in Text Convention Element Example Bold italic Glossary term (if
there is a glossary) The algorithm inserts the new key.
Caps and lowercase
Buttons, check boxes, triggers, windows
Click the Executable button. Select the Can’t Delete Card check box. Assign a When-Validate-Item trigger to the ORD block. Open the Master Schedule window.
Courier new, case sensitive (default is lowercase)
Code output: debug.set (‘I”, 300); Directory: bin (DOS), $FMHOME (UNIX) Filename: Locate the init.ora file. Password: User tiger as your password. Pathname: Open c:\my_docs\projects URL: Go to http://www.oracle.com User input: Enter 300 Username: Log on as scott
Initial cap Graphics labels (unless the term is a proper noun)
Customer address (but Oracle Payables)
Italic Emphasized words and phrases, titles of books and courses, variables
Do not save changes to the database. For further information, see Oracle7 Server SQL Language Reference Manual. Enter [email protected], where user_id is the name of the user.
Quotation marks
Interface elements with long names that have only initial caps; lesson and chapter titles in cross-references
Select “Include a reusable module component” and click Finish. This subject is covered in Unit II, Lesson 3, “Working with Objects.”
7. In the Integration Repository select Procurement then Purchasing.
8. Click Standard Purchase Order and note that the repository not only lists links to the Import Standard Purchase Orders open interface but includes definitions for all APIs, XML documents, EDI documents, and Web services.
The Integration Repository is included in all installations of Oracle E-Business Applications.
9. Click Home to return to the Navigator.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Part of initial set up for Oracle Purchasing employees. In this practice, you will create a new employee and a new user for yourself to be used during the remaining practice sessions of this course. Do not be too concerned at this point about what the fields mean, as we will be discussing most of them in depth during the remainder of the course.
Assumptions
• Replace XX with your terminal number or initials.
• You have prior experience using Oracle Applications or have completed an introductory Oracle Applications course.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
Tasks
Sign on to the Personal Home Page − User = operations − Password = welcome
Define an Employee
Responsibility = Human Resources, Vision Enterprises
Define yourself as an employee with account details as shown in steps 4-6 below.
Add a New User
Responsibility = System Administrator
Define yourself as a user with account details as shown in steps 9 & 10 below.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Sign on to the Personal Home Page − User = operations − Password = welcome
Define an Employee
Responsibility = Human Resources, Vision Enterprises
1. Navigate to the People window
• (N) People > Enter and Maintain
2. (B) New − Last = Your last name − First = Your first name − Gender = Choose a gender − Action = Create Employment − Person Type = Employee − Social Security = Enter any 9 digit number (xxx-xx-xxxx)
Note: If you get a message indicating that the social security number is a duplicate accept it. For the purposes of the exercise it doesn’t matter if it is a duplicate it or not.
− Birthday = Enter a birthday (dd-mmm-yyyy)
3. (I) Save.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
4. (B) Assignment. Create an assignment using the following information:
Note: Click Correction, then Cancel in the People Group window that opens while you are making your entries. During position entry, enter Yes to the Decision window.
Field Value
Organization Vision Operations
Job MGR500.Manager
Position MM400.MATERIALS MANAGER
Location M1- Seattle Mfg
5. (T) Supervisor − Name = Brown, Ms. Casey
6. (T) Purchase Order Information − Set of Books = Vision Operations (USA) − Default Expense Account = 01-110-7740-0000-000
Note: Click Cancel in the Alias window and enter the account number manually.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Note: Click Cancel in the window that opens regarding location.
8. Close windows until you are back at the Navigator.
Add a New User
Responsibility = System Administrator
9. Navigate to the Define Users window
• (N) Security > User > Define − User Name = XXUSER (where XX is your unique ID) − Password = welcome (tab, re-enter password to verify) − Person = The employee you created
10. Add the following responsibilities to your new username
Responsibility Security Group
Purchasing, Vision Operations Standard
Payables, Vision Operations Standard
Human Resources, Vision Enterprises Standard
Inventory, Vision Operations Standard
iProcurement Standard
Integration Repository Standard
Alert Manager, Vision Enterprises Standard
Preferences SSWA Standard
Workflow Standard
System Administration Standard
System Administrator Standard
Order Management, Super User, Vision Operations (USA)
Standard
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Part of initial set up for Purchasing employees. In this exercise, you will set yourself up as a buyer in order to complete later practices.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Responsibility = Purchasing, Vision Operations
Set yourself up as a buyer in the define Buyers window.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Note: The Fill Employee Hierarchy adds our position and people assigned to the position to the position hierarchy. This process is not necessary for an Employee/Supervisor hierarchy. Both types will be discussed during this course.
Monitor the Request Until It Completes
5. (M) View > Requests
6. (B) Find
7. (B) Refresh Data until the request completes
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice, you will create a location to use with later practices.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Create a Location
Responsibility = Purchasing, Vision Operations
Open the Location window and create a location for XXManufacturing, 13400 West Ocean Air Drive, San Diego, CA, 92130.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Note: Uncheck the Global check box if you want the location to only be available within the default Business Group of your current responsibility. Accept the default if you want the location to be a global location and therefore available to all Business Groups.
2. (T) Address Details − Address Style = United States.
3. Click in the Address field and enter:
Field Value
Address 13400 West Ocean Air Drive
City San Diego
State CA
Zip 92130
County San Diego
Country United States
4. Click OK.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
7. (T) Shipping − Contact = <Select a contact name>
8. (I) Save − Ship-To Location = XXManufacturing
9. Check to make sure the site is a Ship-To, Receiving Site, Office Site, Internal Site and Bill-To Site.
Note: Selecting the check boxes means that you are making the Location Name a valid location in the list of values on a Purchasing document. For example, selecting Ship-To Site makes the location name a valid choice in the list of values for the Ship-To field on a purchase order header. Note that if you define a default Ship-To or Bill-To Location in the Supplier-Purchasing region of the Financials Options window for your organization that is the location that defaults onto your purchase orders. But if you wanted to change that default, the Location Name that you define here and enable as a Ship-To or Bill-To site is available in the list of values for you to choose from in the Ship-To or Bill-To fields.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
10. (T) Other Details − Inventory Organization = Blank
Note: Leaving this field blank will allow this location to be used with multiple inventory organizations. Specifying an inventory organization will ensure that the location is ONLY used with the specified inventory organization.
− EDI Location = Blank
Note: If you use Electronic Data Interchange (EDI) to receive Advance Shipment Notices (ASNs) or ASNs with billing information (ASBNs), enter a defined location. This location should match the ship-to location specified on an ASN or ASBN.
11. (I) Save
12. Close the Locations window.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
As a part of initial Purchasing setup, in this practice you will create an inventory organization to be used in later practices.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Create an Inventory Organization
Responsibility = Purchasing, Vision Operations
In the Organizations window create a plant XXManufacturing that is an Inventory Organization in Vision Operations.
Assign the Organization to an Existing Item Master
In the Additional Organization Information window give your new Inventory Organization a code of XXM and assign it to Vision Operations. Be sure to set up appropriate GL accounts for both Costing Information and Other Accounts.
Specify Receiving Information
In the Additional Organization Information window, enter appropriate Receiving Information for your Inventory Organization.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
2. (B) New − Name = XXManufacturing − Type = Plant − Enter a date in the From field early enough for any historical information that you
need to enter. (The default is the current date.) − To Date = Leave Blank − Location = XXManufacturing
3. Save
Note: Multiple inventory organizations can share the same physical location if the Inventory Organization field associated with the Location was left blank (as in the prior exercise!).
4. For the Name field in the Organization Classifications region, use the list of values to select Inventory Organization.
5. Select the Enabled check box (use the mouse or the space bar).
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Note: A huge difference between a Location and an Inventory Organization is that Inventory Organizations determine a lot of accounting that gets sent to the General Ledger! For Purchasing, we are mainly concerned about Purchase Price Variance, Invoice Price Variance and Inventory AP Accrual accounts.
20. Close the Organization Parameters window but do NOT close the Organization window.
Specify Receiving Information
21. Re-open the Organization Parameters window:
• (B) Others
22. In the Additional Organization Information window, select Receiving Information. − Days Early = 5 − Days Late = 5 − Receipt Days Exceed-Action = Warning − Tolerance = 5% − Over Receipt Action = Warning − Receipt Routing = Standard − Allow Unordered Receipts = Checked − Allow Express Transactions = Checked − Allow Cascade Transactions = Checked − Next Receipt Number = 1000 − Receiving Inventory Account = 01-000-1410-0000-000 − Clearing Account = 01-000-2929-0000-000
23. (B) Save and select Close Window.
24. Exit window back to the navigator.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice you will create a unit of measure class, units of measure, and unit of measure conversions to be used later when creating purchasing documents.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Responsibility = Purchasing, Vision Operations
Create a Unit of Measure Class
Create an XXQty unit of measure class.
Create Three Units of Measure
Create XXDozen, XXCase, and XXGross units of measure.
Create Conversions for Your Units of Measure
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice you will create a purchasing category to be used later when creating purchasing documents.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Responsibility = Purchasing, Vision Operations
Add Key Values for Purchasing Category Combinations
Add XX to the PO Item Category value set.
Create Purchasing Categories
Create categories for XX.COMPUTER and XX.SUPPLIES.
Assign the Categories to a Category Set
Assign the categories you created to the Purchasing category set.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Add Key Values for Purchasing Category Combinations
Note: In most cases creating a Purchasing category would only require the steps below for creating category codes and then assigning them to the Purchasing category set. Since the Flexfields in the Oracle Vision database have dependent value sets due to other product requirements, we have to do a little extra work.
1. Navigate to the Key Segment Values window
• (N) Setup > Flexfields > Key > Values
2. Add XX to the PO Item Category value set
• Select Value Set, enter PO Item Category as Name, and click (B) Find.
• Place your cursor in the first open row of the Values, Effective tabbed region. If no open rows are visible, select any row and click (I) New.
• Enter XX in the Value field, and XX in the Description field.
• (I) Save. Do not exit the window.
Note: Click OK in the Compile note when it appears if you did exit the window.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice you will create items that you will create a purchase order for and receive in subsequent practices.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Responsibility = Purchasing, Vision Operations
Create an Expense Item, Inventory Item, and Capital Item
Use the details in table 1 below to create three items.
Enable the Items in an Inventory Organization
Use the details in table 2 below to enable your new items.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Your supervisor has notified you that the company will be purchasing materials and services from a new supplier. In this practice, you will create a supplier with two sites.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Create a Supplier
In the Suppliers page create the standard manufacturing supplier commonly acceptable defaults.
Create a Pay Site
Create a site for XXIBM Corporation at 1 Main St., San Francisco, CA, 94105. This is a pay site with a phone number of 415.555.1234 and an email address of [email protected]. Contact for this site is John Doe whose email address is [email protected] and phone extension is 1234.
Create a Purchasing Site
Create a site for XXIBM Corporation at 520 Madison Ave., New York, NY, 10022. This is a purchasing site with a phone number of 212.555.7703 and an email address of [email protected]. Contact for this site is Jane Doe whose email address is [email protected] and phone extension is 234.
O
racl
e U
nive
rsity
and
Ega
bi S
olut
ions
use
onl
y
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Note: Enable the Create Debit Memo From RTS Transaction option if you want the system to automatically create a Debit Memo in Payables when you enter a Return to Supplier (RTS) in Purchasing. The value for supplier site defaults from the Purchasing Options window.
12. (L) Invoice Management. − Make sure Invoice Currency is US Dollar − Invoice Match Option = Purchase Order − Terms = Immediate − Pay Group = Standard Supplier Paygroup − Always Take Discount = Checked
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
16. Enter the supplier site address information as follows: − Country = United States − Address Line 1 = 1 Main St. − City = San Francisco − County = San Francisco − State = CA − Postal Code = 94105 − Address Name = San Francisco − Addressee = San Francisco − Phone Area Code = 415 − Phone Number = 555-1234 − Email Address = [email protected] − Address Purpose, Payment = Checked
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
26. Enter the supplier site address information as follows: − Country = United States − Address Line 1 = 520 Madison Ave. − City = New York − County = New York − State = NY − Postal Code = 10022 − Address Name = New York − Addressee = New York − Phone Area Code = 212 − Phone Number = 555-7703 − Email Address = [email protected] − Address Purpose, Purchasing option = Checked
Note: This address should be complete as this is the address that will appear on any checks cut to this site!
27. (B) Continue.
28. Select the Vision Operations Operating Unit.
29. (B) Apply. This creates the basic supplier site.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Note: When you enter and approve purchase orders for this supplier, the Supplier Notification Method will default. We’ve chosen printed document here. However, if we chose e-Mail and specified an e-mail address, that information would default during purchase order approval so we could send the purchase order using the supplier’s preferred method. Valid options are e-Mail, Fax and Printed Document.
32. (B) Apply.
Create a Contact for the Pay Site
33. (L) Contact Directory.
34. (B) Create. − First Name = John − Last Name = Doe − Email Address = [email protected] − Phone Area Code = 415 − Phone Number = 555-1234 − Phone Extension = 1234 − Create User Account for this Contact = Checked − iSupplier Portal Full Access = Checked
35. (B) Add Another Row.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
39. (B) Create. − First Name = Jane − Last Name = Doe − Email Address = [email protected] − Phone Area Code = 212 − Phone Number = 555-7703 − Phone Extension = 234 − Create User Account for this Contact = Checked − iSupplier Portal Full Access = Checked
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
You can approve standard purchase orders up to 25000 for all purchases; however, you only have a 1000-dollar limit for requisitions you submit.
1. Vision Operations operating unit
2. Name = XX-25K
3. Description = 25K Approval; All accounts
Object Type Amount
Limit Low Value High Value
Document Total Include 25000
Account Range Include 25000 00-000-0000-0000-000 99-999-9999-9999-000
Note: If you do not enter a rule for an account, the default is to exclude the account. If you enter only an Exclude Type rule, Purchasing does not automatically include everything else.
4. Place cursor in Name field
5. (I) New
6. Name = XX-1K
7. Description = 1K Approval, All Accounts
Object Type Amount
Limit Low Value High Value
Document Total Include 1000
Account Range Include 1000 00-000-0000-0000-000 99-999-9999-9999-000
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
This practice is designed to walk you through the most common aspects of setting up document routing and approval for an Oracle Purchasing buyer. You will add a new position to the hierarchy and link it to your employee record created previously. Then you will create an approval group and test all of your set up with a very simple purchase order.
Note: The instructor must run the Fill Hierarchy process during this practice. Refer to the guided demonstration for assistance.
Assumptions
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Replace XX with your terminal number or initials.
• Logon to the system using the XXUSER you created earlier.
Tasks
Create a new position
Add the position to the existing Materials Hierarchy
Confirm the default hierarchy for standard purchase orders
Create a new approval group
Verify your inclusion in the position to the existing Materials Hierarchy
Create a purchase order and submit for approval
Determine status assigned and view action history for forwarding information
Determine why the document went to the above person O
racl
e U
nive
rsity
and
Ega
bi S
olut
ions
use
onl
y
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Responsibility = Human Resources, Vision Enterprises
1. Navigate to the Positions window
• (N) Work Structures > Position > Description
2. (B) New − Date Effective Name = MMXX.MATERIALS MANAGER − Type = None − Permanent = Check box − Organization = Vision Operations − Job = MGR500.Manager − Status = Active − Location = V1- New York City
3. (I) Save
Confirm the default hierarchy for standard purchase orders
16. Select Vision Operations as the Operating Unit.
17. Enter the approval group: − Name = XX JR Buyer − Description = $10,000 limit, all accounts − Object = Account Range − Type = Include − Amount Limit = 10000 − Low Value 00-000-0000-0000-000 − High Value 99-999-9999-9999-999
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
20. On the Approval Assignments window: − Operating Unit = Vision Operations − Position = MMXX.MATERIALS MANAGER − Document Type = Approve Standard Purchase Orders − Approval Group = XX JR Buyer
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
45. Determine who the document was forwarded to for approval
46. (M) Inquire > View Action History
47. Who was it forwarded to? ____________________________
Determine why the document went to the above person rather than your supervisor, Casey Brown.
48. Log in as a different user to be able to access the Materials hierarchy
• (M) File > Log in as a Different User (your instructor will provide log on information) − Responsibility = Human Resources, Vision Enterprises
49. Navigate to the Position Hierarchy window
• (N) Work Structures > Position > Hierarchy
50. Query the Materials hierarchy
51. Place cursor in Position Name field and query the BUY501.Buyer 1 position − Holder = look at the list of values that identifies all the employees holding this
position.
52. The answer: − Because standard purchase orders are routed according to the Materials Hierarchy − Your position is attached to BUY501.BUYER 1 in this hierarchy. − Catherine Baker is the first holder of this position (follows alphabetical order).
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice you will add several suppliers and the supplier you created in a previous practice to a supplier list.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Responsibility = Purchasing, Vision Operations
Create a Supplier List
Add Advanced Network Devices, Star Gate Ltd, Advantage Corp, and your XXIBM Corp. to a XXComputer Hardware supplier list.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
• (N) Supply Base > Supplier Lists − Name = XXComputer Hardware − Description = Computer Hardware
2. Add the supplier you created to your list, as well as the following suppliers (use the list of values from the toolbar to select vendors and sites):
Name Site
Advanced Network Devices SANTA CLARA
Star Gate Ltd STARGATE-BUY
Advantage Corp ADVANTAGE - US
XXIBM Corporation NEW YORK
3. (B) Save
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice you will add an item that you created in previous practice to a Catalog RFQ. You will use the supplier list you created in the prior practice to copy suppliers on to the RFQ.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System − Responsibility = Purchasing, Vision Operations
Create a Catalog RFQ
1. Open the RFQs window − Operating Unit = Vision Operations − Type = Catalog RFQ − Status = Active − Due Date = Two weeks from today − Description = XXComputer Hardware − Reply Via Field = Mail − Close Date = Three weeks from today − Quote Approval Required = Checked − Quote Effectivity = Today’s date to one year from today
Complete the Requested Terms
2. Use the Terms window to add a note to the supplier. − Payment Terms = 45 Net (terms date + 45) − Carrier = UPS − Note to Supplier = Please expedite your response!
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
5. Add suppliers to your RFQ by copying them from your XXComputer Hardware supplier list.
Print the RFQ
6. Use the Printed RFQ Report (Landscape) to print your RFQ. Use the following parameters. − Name = Printed RFQ Report (Landscape) − Operating Unit = Vision Operations
Parameter Value
Report Type All
RFQ Number From Your RFQ
To Your RFQ
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Note: After the RFQ is printed; the status changes to from Active to Printed. If you want to reprint your RFQ, re-query your RFQ, change the status to Active. Click the Supplier button and select the “include in next printing” check box. Save your changes then re-run the Printed RFQ report.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice you will record a catalog quote from your supplier. Copy details in the RFQ directly on to the catalog quote using the Copy Document functionality.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System − Responsibility = Purchasing, Vision Operations
Automatically Create a Quotation from an RFQ
1. Open the RFQs window and find your RFQ
2. (M) Tools > Copy Document.
3. Use the list of values to choose the following parameters:
Parameter Value
Action Entire RFQ
Number N/A for automatic numbering
Type Catalog Quotation
Supplier XXIBM Corporation
Site NEW YORK
Contact Choose from your list of values
− Status = Active
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Log on to the System − Responsibility = Purchasing, Vision Operations
Automatically Create a Quotation from an RFQ
1. (N) RFQs and Quotations > RFQs
2. (M) View > Find
3. In the Find field, enter the number of your RFQ from the prior exercise.
4. (B) Find
5. Click on your RFQ
6. Click OK
7. Open the Copy Document window:
• (M) Tools > Copy Document.
• Use the list of values to choose the following parameters:
Parameter Value
Action Entire RFQ
Number N/A for automatic numbering
Type Catalog Quotation
Supplier XXIBM Corporation
Site NEW YORK
Contact Doe, Jane
Note
• Enter a quotation number if you are using manual quotation numbering. If your setup is for automatic quotation numbers, Oracle Purchasing will assign a number when you save your work.
• The PO: Display AutoCreated Quotation profile option determines if the quotations window is displayed after the RFQ is copied to the quotation.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Practice - Create an Approved Supplier List Status
Overview
In this practice you will create an approved supplier list status.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System − Responsibility = Purchasing, Vision Operations
Create a Supplier Status
1. Navigate to the Approved Supplier List Status window
• Status = XXApproved
• Description = Approved for Business
Assign Business Rules
Assign business rules to the status according to the following table: Control Rule Rule Description
Allow PO Approval Purchase Order Approval
Allow Sourcing Sourcing
O
racl
e U
nive
rsity
and
Ega
bi S
olut
ions
use
onl
y
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Practice - Require an Approved Supplier for an Item
Overview
In this practice you will set the Use Approved Supplier attribute on an item.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System − Responsibility = Purchasing, Vision Operations
Set the Use Approved Supplier Flag for an Item
1. Navigate to the Organization Items window
• Organization = M1 – Seattle Manufacturing
• Item = XXMonitor
• Use Approved Supplier = Checked
Attempt to Enter a Purchase Order for the Item
2. Attempt to enter a Purchase Order for the Item
• Supplier = Advanced Network Devices
• Site = SANTA CLARA
• Item = XXMonitor
• Quantity = 10
• Price = 250
• Need-By = Today’s date
• Verify that this item requires an approved supplier list
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice you will enter a supplier and add it to a supplier list.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System − Responsibility = Purchasing, Vision Operations
Create a Catalog Quote
Create a catalog quote for your XXMonitor item that is effective from today’s date to a year from today. Quote approval will be required to reference this quotation on a purchase document. Approve the quotation for all orders.
1. Open the RFQs window: − Supplier = Advanced Network Devices − Site = SANTA CLARA-ERS − Status = Active − Effectivity = Today to a year from today − Quote Approval Required = Checked
Num UOM Quantity Price Org Ship-To Discount
1 Each 10 Calculates M1 M1-Seattle 10
2 Each 25 Calculates M1 M1-Seattle 15
3 Each 50 Calculates M1 M1-Seattle 20
Add an Approved Supplier for your Item
Add an approved supplier list for your XXMonitor item. The owning organization will be the M1-Seattle Manufacturing but the approved supplier list will be global.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
2. Open the Approved Supplier List window: − Business = Direct − Name = Advanced Network Devices − Site = SANTA CLARA-ERS − Status = XXApproved − Supplier Item = XXSVGA17
Don’t save yet!
Make the Approved Supplier List a Global Approved Supplier List
3. (T) Record Details − Global = Yes
Define the Attributes of the Approved Supplier List Entry
You will use the PO Create Documents workflow or the AutoCreate window to create standard purchase orders. Make sure that the release method is set appropriately.
− Release Method = Release Using AutoCreate − Type = Quotation − Number = Your quotation number
4. In the Line field enter the line number of your inventory item.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Log on to the System − Responsibility = Purchasing, Vision Operations
Create a Catalog Quote
1. (N) RFQs and Quotations > Quotations − Operating Unit = Vision Operations − Type = Catalog Quotation − Supplier = Advanced Network Devices − Site = SANTA CLARA-ERS − Status = Active − Effectivity = Today to a year from today − Quote Approval Required = Checked
2. (T) Items
3. Enter item information according to the following table:
Num Item Category Description UOM
1 XXMonitor MISC.MISC Inventory Item Each
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
• You can use this date to determine when a proactive business review should be performed for the supplier. There are no standard reports, alerts or notifications associated with this field. To have advance notification, create an alert.
• You can search suppliers requiring a review using the Approved Supplier List Summary window.
Make the Approved Supplier List a Global Approved Supplier List
14. (T) Record Details
• Global = Yes from the pop-up list to indicate this item and supplier site combination should be available to all organizations. A local ASL entry will override a global ASL entry.
15. Save O
racl
e U
nive
rsity
and
Ega
bi S
olut
ions
use
onl
y
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Define the Attributes of the Approved Supplier List Entry
16. (B) Attributes − Release Method = Release Using AutoCreate
17. (T) Source Documents − Type = Quotation − Number = Your quotation number
Note: If your quotation does not appear on the list of values check to ensure the status is active and the quote is approved! Recall that we selected the Quote Approval Required option on the RFQ that is associated with this quotation.
18. In the Line field enter the line number of your inventory item.
Item number will default from quotation.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
20. Close the Supplier-Item Attributes and Approved Supplier List forms to return to the Navigator.
Note: Blanket purchase orders and quotations are not required to create an Approved Supplier List. In addition, it is not even necessary to associate a blanket purchase agreement or quotation in the Source Details window if you set the PO: Automatic Document Sourcing profile option to “Yes”.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Commodity level ASLs exist primarily for the buyer to be able to exercise control over a supplier’s ability to source. In other words, the buyer can with very little effort block a supplier for an entire commodity. In this exercise, you will learn to understand ASL precedence.
Assumptions
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• AND refers to Advanced Network Devices
Tasks
1. Consider the following scenarios:
Scenario 1
COMPUTER.SUPPLIES101Key Keyboard
17" Flat Panel Monitor36X CD-ROM
COMPUTER.SUPPLIES
Supplier DisabledStatus
Supplier DisabledStatus
17" Flat Panel Monitor
AND
IBMStargate
ApprovedApproved
Approved
Which suppliers can approve POs for the Monitor?
.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Note: In this scenario IBM and Stargate may supply 17" Flat Panel Monitors. AND can supply all supplies in the Computer.Supplies category. For approvals, as long as there are item level approved suppliers on the list, the category level suppliers are ignored.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Note: Assuming that the Debarred status is set up to prevent PO approval and sourcing, in this scenario only AND can approve POs for the monitor. IBM and Stargate are still on the ASL, they just can't approve POs or source.
Scenario 3
COMPUTER.SUPPLIES101Key Keyboard
17" Flat Panel Monitor36X CD-ROM
COMPUTER.SUPPLIES
Supplier DisabledStatus
Supplier DisabledStatus
17" Flat Panel Monitor
AND
IBMStargate
DebarredDebarred
Approved
Which suppliers can approve POs for the Monitor?
YesYes
Note: IBM and Stargate are no longer on the ASL since they are disabled. Status is irrelevant in this situation. AND can approve purchase orders.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Note: In this scenario no one may approve purchase orders for the monitor. If a supplier is debarred for a category of items, AND is prevented from approving purchase orders or sourcing for the entire category of items.
Purchasing uses commodity this way to debar suppliers.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Practice - Create a Sourcing Rule and a Sourcing Rule Assignment
Overview
In this practice you will create sourcing rules and sourcing rule assignments.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System − Responsibility = Purchasing, Vision Operations
Create a Sourcing Rule
You allocate all computer hardware purchases to a single supplier Advanced Network Devices. Create a global sourcing rule to accomplish that.
− Rule Name = XXComputer Hardware − All Orgs = Selected − Type = Buy From − Supplier = Advanced Network Devices − Site = SANTA CLARA
Verify the Default Assignment Set
Since purchasing only uses the default assignment set specified by the MRP: Default Sourcing Assignment Set profile option, you should verify the value prior to creating a sourcing rule assignment in Purchasing.
1. Navigate to the Personal Profile values window − Profile = MRP:Default Sourcing Assignment Set − Verify default value = Supplier Scheduling
Create a Sourcing Rule Assignment
Create a sourcing rule assignment for the Supplier Scheduling assignment set. The sourcing rule assignment should tie the supplier specified in your sourcing rule to your XXMonitor item.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Solution - Create a Sourcing Rule and a Sourcing Rule Assignment
Log on to the System − Responsibility = Purchasing, Vision Operations
Create a Sourcing Rule
1. Navigate to the sourcing rules window.
• (N) Supply Base > Sourcing Rules (M1 – Seattle Manufacturing) − Rule Name = XXComputer Hardware − All Orgs = Selected − From Date = Today’s date − Type = Buy From − Supplier = Advanced Network Devices − Site = SANTA CLARA (Vision Operations) − Alloc % = 100 − Rank = 1
2. Save
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
4. (M) View > Find − Profile = MRP:Default Sourcing Assignment Set − Verify default value = Supplier Scheduling
Note: Purchasing only uses sourcing rules assigned to the value in the MRP:Default Sourcing Assignment Set. It is essential this is clearly understood.
Create a Sourcing Rule Assignment
5. Navigate to the Sourcing Rule Assignments window
• (N) Supply Base > Assign Sourcing Rule
6. (M) View > Find
7. Choose Supplier Scheduling from the list of values
8. In the Assignments region, click in the customer field.
9. (M) File > New − Assigned To = Item − Item/Category = XXMonitor − Type = Sourcing Rule − Sourcing Rule = XXComputer Hardware
10. Save
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Verify Source Document Information does not Default
31. Navigate to the Requisitions window.
• (N) Requisitions > Requisitions
• Operating Unit = Vision Operations
32. (T) Lines − Item = XXMonitor
33. Verify the supplier information that appears to the right below the lines region. − Quantity = 11
34. Tab out of the field and verify that price breaks are no longer defaulting in from your quote.
35. (T) Source Details
36. Verify there is no quotation information.
Note: If source document information still defaults, use the System Administrator responsibility to verify the PO: Automatic Document Sourcing profile option is set to No at the Site level.
37. The reason supplier information STILL defaults is:
In this practice you will enable and use Automatic Document Sourcing.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
• Note: Before you begin, the instructor must turn on Automatic Document Sourcing by setting the profile option to Yes.
Tasks
Verify Automatic Document Sourcing is Enabled
1. Navigate to the Personal Profiles window
2. Query “PO%Auto%” in the Personal Profiles window.
3. Verify that the profile PO: Automatic Document Sourcing is set to Yes. If it is not set to Yes, you will need to use the System Administrator responsibility to set it to Yes at the Site level.
Create a New Requisition Line/Verify Sourcing Information Defaults
2. Query “PO%Auto%” in the Personal Profiles window.
3. Verify that the profile PO: Automatic Document Sourcing is set to Yes. If it is not set to Yes, you will need to use the System Administrator responsibility to set it to Yes at the Site level.
Create a New Requisition Line/Verify Sourcing Information Defaults
4. Navigate to the Requisitions window.
• (N) Requisitions > Requisitions
• Operating Unit = Vision Operations
5. (T) Lines − Item = XXMonitor − Quantity = 11
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
7. Verify that quotation information has defaulted in.
8. Verify the agreement number in the note window and the supplier information that appears below the lines region.
9. Close the window without saving your work.
Note: When using automatic document sourcing, documents are searched for and defaulted onto the requisition or purchase order based on the following rules:
Blanket purchase agreements are always defaulted before quotations, even if the quotation is more recent.
If only blanket purchase agreements and quotations exist, the most recent one (create dates are compared) is used.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice you will create a purchase requisition.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
• Note: Before you begin this practice, the instructor must turn off Automatic Document Sourcing by setting the profile option to No.
Tasks
Log on to the System − Responsibility = Purchasing, Vision Operations
Create a Purchase Requisition for your item.
1. Open the Requisition window
2. Add your XXMonitor item
3. Enter quantity of 10
4. Need by tomorrow
5. Destination Type of Inventory
6. Use the Organization of Seattle Manufacturing
7. Use the Location of M1 Seattle
8. Enter a note to the receiver to inspect the item
9. Submit your requisition for approval.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice you will create a purchase requisition template.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System − Responsibility = Purchasing, Vision Operations
Create a requisition template
Create a requisition template using your earlier requisition as well as three system items.
1. Open the Requisition template window − Operating Unit = Vision Operations − Template = XX ReqTemplate − Description = XX ReqTemplate Items − Inactive Date = One month from today − Type Field = Purchase Requisition
2. Copy from Base Document − Type = Requisition − Number = your earlier requisition
3. Manually add lines 2-4 according to the table: Num Item Category Description Source
1 XXMonitor MISC.MISC Inventory Item Supplier
2 CM13139 PRODUCTN.DRIVE 8GB Hard Drive Supplier
3 CM15138 PRODUCTN.DRIVE Monitor - 17"(16" Viewable) Short Depth
Log on to the System − Responsibility = Purchasing, Vision Operations
Create a Requisition Template
1. Open the Requisition Template window:
• (N) Setup>Purchasing>Requisition Templates − Operating Unit = Vision Operations − Template = XX ReqTemplate − Description = XX ReqTemplate Items − Inactive Date = One month from today − Type field = Purchase Requisition
2. Save
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Note: For supplier-sourced lines, you can enter the unit price, and this price is used in the Requisitions window. For inventory source lines, the cursor does not enter this field, and the price in the Requisitions window is the actual cost from inventory. You can enter sourcing information for the current line in the lower part of the screen.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Practice - Use the Supplier Item Catalog to Create a Requisition
Overview
In this practice you will create a purchase requisition using your requisition template.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System − Responsibility = Purchasing, Vision Operations
Create a purchase requisition using your template
1. Create a purchase requisition using your purchase requisition template.
2. Open the Requisition window
3. Open the Supplier Item Catalog window
4. Search for your Requisition Template
5. Select your XXMonitor and add it to the Order Pad
6. Change the Quantity to 2
7. Enter a need by date of one week from today
8. Deliver to Org is M1
9. Deliver to Location is Seattle Manufacturing
10. Add this line to the requisition
11. Submit the requisition for approval
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In order to use internal requisitions, you must have Oracle Inventory, Oracle Order Management, and Oracle Purchasing installed. Order Management is used to track internal sales orders. To enter an internal sales order, you must start with a requisition in Purchasing. Steps for this practice:
• Create an internal requisition in Oracle Purchasing
• Instructor will run processes in Oracle Order Management
• Verify the shipment of your internal order in Oracle Purchasing
Assumptions
• Oracle Inventory is installed and configured for internal requisitions.
• Oracle Order Management is installed and configured for internal requisitions.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System − Responsibility = Purchasing, Vision Operations
Create an Internal Requisition
1. Create an internal requisition for 2 of item CM08830. Use the following values:
Field Value Field Value
Destination Type Inventory Source Inventory
Requestor Stock, Ms. Pat
Organization Seattle Manufacturing Organization Boston Manu.
Location M1 - Seattle
Sub-Inventory Stores Sub-Inventory Stores
Wait for instructor to run the internal order processes
Verify the shipment of your Internal Requisition
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Instructor Steps Pass Information to Order Management
• Order Management Super User, Vision Operations responsibility
• Open the Submit Requests window: − (N) Purchasing Reports Run
• Select Single Request
• Request Name = Create Internal Orders
• Click the Submit Request button.
Note: You have completed the necessary steps to initiate the change from requisition to sales order, and populated the order entry tables. You now need to import the sales order into Order Management.
Import Sales Order into Order Management
• (N) Orders, Returns Import Orders Order Import Request
• Operating Unit = Vision Operations
• Order Source = Internal
• (B) Ok
• (B): Submit Request
• (N): Orders, Returns Order Organizer
• Enter your Requisition Number and Click on (B) Find
• Find the Sales Order
• Note the Sales Order Number here: ______________
• (Tab) Lines (bottom of the page next to Summary)
The Status of the Line should be Awaiting Shipping
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
• Create a standard purchase order for two defined items – one expense item and one inventory item.
• Create multiple shipment lines and multiple distribution lines for one or both of the items.
• Run select reports relevant to standard purchase orders.
Assumptions
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Responsibility selected to complete this practice is Purchasing, Vision Operations (USA).
• Replace XX with your terminal number or initials.
• Logon to the system using the XXUSER you created earlier.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Log on to the System − Responsibility = Purchasing, Vision Operations
Create Standard Purchase Order header
1. Navigate to the Purchase Orders window
• (N) Purchase Orders > Purchase Orders − Operating Unit = Vision Operations − Type = Standard Purchase Order − Supplier = Advanced Network Devices − Site = Santa Clara-ERS − Ship-to = M1-Seattle − Bill-to = V1-New York City
2. Navigate to the Terms and Conditions window
• (B) Terms − Payment = 45 Net (terms date + 45) − Confirming Order = Check box − Acceptance Required By = Document − By = One week from today − Supplier Note = Please call if there are any problems
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
• (B) Distributions − Num = 1 − Quantity = 2 − Charge Account = Allow to default
15. Add another distribution − Num = 2 − Quantity = 2 (should have defaulted) − Charge Account = Allow to default, then override the department value to 730
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
• (B) Approve − Submit for Approval = Check box − Uncheck all other options
32. (B) OK
33. Ensure that the status on the purchase order header is Approved
34. Close window back to Navigator.
Run the Printed Purchase Orders Report (Landscape)
35. Navigate to the Submit Request window
• (N) Reports > Run − Choose Single Request − Name = Printed Purchase Order Report(Landscape) − Operating Unit = Vision Operations − Print Selection = All
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
39. Monitor progress and view output when complete
• (M) View > Requests
40. (B) Find
41. Once the request completes, (B) View Output
Run the Purchasing Activity Register
42. Navigate to the Submit Request window
• (N) Reports > Run − Choose Single Request − Name = Purchasing Activity Register − (B) Submit − Operating Unit = Vision Operations − Creation Dates From and To = Today’s date − Supplier = Advanced Network Devices
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Practice - Create a Blanket Purchase Agreement and Blanket Release
Overview
In this practice, you will do the following:
• Create a blanket purchase agreement for two items, which will establish pricing for the items, although the quantity and delivery dates/locations are not known.
• Create a blanket release against the agreement for your first order of these items.
Assumptions
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Responsibility selected to complete this practice is Purchasing, Vision Operations (USA).
• Replace XX with your terminal number or initials.
• Logon to the system using the XXUSER you created earlier.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Enter notification controls so that you’ll be warned by the system of certain situations that are either expected or might occur with this blanket purchase agreement.
Submit your purchase agreement for approval
Issue a blanket release to place your first order against the agreement
Submit your blanket release for approval
Increase your quantity ordered to 3 so that the release will be above the minimum release amount
Submit your blanket release for approval
Return to the Blanket Purchase Agreement to view how it was updated as a result of the release
Run the Purchase Order and Releases Detail Report
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
10. Enter the following price breaks for this item
Num Org Ship-to Quantity Break Price
1 M1 M1-Seattle 5 $950.00
2 M1 M1-Seattle 10 $900.00
3 M1 M1-Seattle 15 $850.00
11. Save
Enter notification controls so that you’ll be warned by the system of certain situations that are either expected or might occur with this blanket purchase agreement.
12. Close the Price Breaks window
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
34. What would happen to this value if you issue another release with a value of $1,800?
Run the Purchase Order and Releases Detail Report
35. Navigate to the Submit Request window
• (N) Reports > Run − Choose Single Request − Name = Purchase Order and Releases Detail Report − Operating Unit = Vision Operations − Purchase Order Numbers From = Your blanket purchase agreement number − Purchase Order Numbers To = Your blanket purchase agreement number
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
• Create a contract purchase agreement to establish general terms and conditions with this supplier. Items, quantities and delivery dates/locations are not known.
• Create a standard purchase order referencing the contract.
Assumptions
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Responsibility selected to complete this practice is Purchasing, Vision Operations (USA).
• Replace XX with your terminal number or initials.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System
Create a contract purchase agreement
Submit your contract agreement for approval
Issue a standard purchase order referencing the contract
Enter an expense item that you need to order
Submit your standard purchase order for approval
Return to the Contract Purchase Agreement to view how it was updated as a result of the release
Run the Contract Status Report
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
• (N) Reports > Run − Single Request − Name = Contract Status Report − Operating Unit = Vision Operations − PO Numbers From and To = Your contract purchase agreement number
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice, you will use the AutoCreate form to return a requisition.
Assumptions
• Replace XX with your terminal number or initials.
• You created your own items in a previous practice.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System − Responsibility = Purchasing, Vision Operations
Requisition your Expensed Item
1. Add your expensed item to a requisition.
2. Navigate to the Requisitions window − Description = XXPurchases − Item = XXSoftware − Quantity = 10 − Need-by = Today’s Date + 1 week − Destination Type = Expense − Organization = Seattle Manufacturing − Location = M1- Seattle − Supplier = Blank − Site = Blank
Requisition your Inventory Item
3. Add your inventory item to a requisition − Item field on line 2 = XXMonitor − Quantity = 5 − Need-by = Today’s Date + 1 week − Destination Type = Inventory − Organization = Seattle Manufacturing − Location = M1 – Seattle
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice, you will use the AutoCreate form to return a requisition.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System − Responsibility = Purchasing, Vision Operations
Autocreate a Standard Purchase Order
1. Use the AutoCreate window to find the requisition you returned in the last practice. Use automatic creation mode to create a standard purchase order.
− Supplier = Advanced Network Devices − Site = SANTA CLARA-ERS
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Practice - Create Releases using the Create Releases Program
Overview
In this practice, you will create a release using the Create Releases Program.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System − Responsibility = Purchasing, Vision Operations
Create a Blanket Purchase Agreement
1. Create a blanket purchase agreement for your XXSoftware item.
2. Navigate to the Purchase Orders window − Supplier = Advanced Network Devices − Site = SANTA CLARA-ERS − Amount Agreed = 10000 − Description = XXSupplies
• Select items according to the following table:
Num Item Category Description UOM
1 XXSoftware MISC.MISC Expensed Item Each
O
racl
e U
nive
rsity
and
Ega
bi S
olut
ions
use
onl
y
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Specify price breaks according to the table and then submit your blanket purchase agreement for approval.
Num UOM Quantity Price Org Ship-To Discount%
1 Each 10 Defaults M1 M1 - Seattle 10
2 Each 25 Defaults M1 M1 - Seattle 15
3 Each 50 Defaults M1 M1 - Seattle 20
Create a Sourcing Rule
3. Create a global sourcing rule.
4. Navigate to the Sourcing Rules window − Name = XXComputer Purchases − All Orgs = Selected − Effective Date = From today − Supplier = Advanced Network Devices − Site = SANTA CLARA-ERS
Create a Sourcing Rule Assignment
5. Link your XXSoftware item to a sourcing rule by creating an Item assignment.
6. Navigate to the Sourcing Rule Assignments window
7. Choose Supplier Scheduling from the list of values − Assigned To = Item − Item/Category = XXSoftware − Sourcing Rule = XXComputer Purchases
Create an ASL Entry/Specify your Blanket as the Source Document
8. Create a global approved supplier list entry owned by M1 – Seattle Manufacturing for your XXSoftware item.
− Item = XXSoftware − Business = Direct − Name = Advanced Network Devices − Site = SANTA CLARA-ERS − Status = Approved − Supplier Item = XXOAPR11i
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Make the Approved Supplier List a Global Approved Supplier List
9. Set the Global attribute to Yes to ensure this is a global approved supplier list entry. − Global = Yes
Define the Attributes of the Approved Supplier List Entry
10. Set attributes for the approved supplier list entry. You want to be able to create blanket purchase agreement releases that are automatically approved.
11. Set the Release Method − Release Method = Automatic Release − Type = Blanket Purchase Agreement − Number = Your blanket purchase agreement number
Submit a Requisition
12. Create a requisition for your XXSoftware item. − Item = XXSoftware − Quantity = 10
13. Note that source document information has defaulted
14. Approve the requisition
Run the Create Releases Program
15. Navigate to the Standard Request Submission window
16. Submit the Create Releases Program
View the Release
17. Navigate to the Purchase Order Summary window
18. Find your blanket purchase agreement release. You can use the Related Documents tab and specify your requisition number to find the release.
− View Releases = Checked
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Practice - Automatically Create a Standard Purchase Order based on your Quotation
Overview
In this practice, you will create a standard purchase order based on your quotation.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the system − Responsibility = Purchasing, Vision Operations
Create a Catalog Quote
1. Navigate to the Quotations window − Supplier = Advanced Network Devices − Site = SANTA CLARA-ERS − Status = Active − Effectivity = Today to a year from today
Enter item information according to the following table:
Num Item Category Description UOM
1 XXMonitor MISC.MISC Inventory Item Each
Specify Price Breaks
2. Specify price breaks according to the following table:
Num UOM Quantity Price Org Ship-To Discount
1 Each 10 Calculates M1 M1-Seattle 10
2 Each 25 Calculates M1 M1-Seattle 15
3 Each 50 Calculates M1 M1-Seattle 20
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
4. Navigate to the Requisitions window − Item = XXMonitor − Quantity = 10 − Supplier Item = XXSVGA17 − Type = Quotation − Document = Your quotation number − Line = 1 Supplier = Advanced Network Devices (Use the list of values!) − Site = SANTA CLARA-ERS (Use the list of values!)
Note: Sourcing rules would automate the defaulting of a supplier and site!
Verify a Standard Purchase Order Was Created
5. Navigate to the Purchase Order Summary form and verify a standard purchase order was created.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Solution - Automatically Create a Standard Purchase Order based on your Quotation
Log on to the System − Responsibility = Purchasing, Vision Operations
Create a Catalog Quote
1. Open the Quotations window:
• (N) RFQs and Quotations > Quotations − Operating Unit = Vision Operations − Type = Catalog Quotation − Supplier = Advanced Network Devices − Site = SANTA CLARA-ERS − Status = Active − Effectivity = Today to a year from today
2. (T) Lines
Enter item information according to the following table:
Num Item Category Description UOM
1 XXMonitor MISC.MISC Inventory Item Each
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
8. (T) Lines − Item = XXMonitor − Quantity = 10 − Supplier = Advanced Network Devices (Use the list of values!) − Site = SANTA CLARA (Use the list of values!)
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Guided Demonstration - Introduce the Buyer’s Work Center
Buyer’s Work Center introduction
Responsibility: Purchasing, Vision Operations
1. (N) Buyer’s Work Center > Requisitions > (T) Requisitions. Important features on this page:
• The different views available and the Personalize button to create customized views.
• The Operating Unit field in Document Builder. This shows up because MOAC is enabled.
• Actions icons:
• Paper icon – replace with items from the unified catalog
• Paper icon with star – replace with items from your Favorites list
• Split icon – split requisition line
2. (T) Orders. While on this page review the following:
• Operating Unit column. With MOAC, the same buyer could see orders from multiple operating units.
• (H) Order number. Drill down to show details of an order. Note that once on an order, the Lines, Schedules, and Distribution tabs display additional information about that order. In addition, note the Actions LOV values.
• (H) Status for an order. Drill down to show the action history of this order.
• Create a personalized view for a particular supplier (Corporate Express Office Supply is a good candidate).
• Note that the Pay Items tab is used for Oracle Services Procurement complex services.
3. (T) Agreements. While on this page point out the following:
• OU column
• Drill down on an agreement number to display details. Display the Actions LOV values for the agreement.
4. (T) Deliverables. Note that this page is used to manage deliverables for Oracle Procurement Contracts.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
5. (T) Negotiations. Note that clicking the Negotiations tab takes you to the Oracle Sourcing home page from which you can create and manage Sourcing events.
6. (T) Suppliers. Note that clicking the Suppliers tab allows you to maintain the supplier base.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice you will use the Personalize feature of the Buyer’s Work Center to create a view of just your requisitions and make that view the default.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Create a Personalized View
Create a view for your XXUSER that returns all the requisitions where you are the buyer.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
• (N) Buyer Work Center > (T) Requisitions > Personalize
See a table of existing views. The views that come seeded with the product are NOT updatable as noted by the grayed out pencil icon.
2. Navigate to the Create View window.
• (B) Create View
3. Enter the following information: − View Name = XXUSER Requisitions − Number of Rows Displayed = 15 Rows − Check Set as Default (This sets this view as the default for your user.)
Note: There can be an "Oracle-seeded" end user view and an "Admin-seeded" end user view of the same region. However, if an end user also has a personalized view of the same region that he or she marks as the default, then the end user's personalized view takes precedence over any seeded views and is the default for that end user.
− Description = Requisitions for XXUSER − Columns Displayed = Leave as is for this practice. − Select Requisition as First Sort Column Name and ascending for Sort Order − Select Show table data when any conditions are met − (B) Add Preparer − Buyer (is) = Your last name, first − Preparer (is) = Your last name, first
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
You are returned to the Personalize Views window. Notice your new view and that it is set as default.
5. (B) Apply
(Your new view will be the default view the next time that you log in.)
6. (H) Close window.
Note: These same basic steps apply to creating personalized views for orders and agreements in the Buyer’s Work Center. An optional practice would be to create personalized views for your user as well.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
3. Enter a style name and description for standard purchase orders.
4. In the Document Type field, enter a Display Name.
5. In the Commodities field, deselect Goods and select Services. This will create a document style that only allows services lines.
6. (B) Apply
Create a Purchase Order Using the Document Style
7. (N) Buyers Work Center > (T) Orders
8. From the Create menu, select your document style, and click Go.
9. Note that the document style is used in the page title (Create document style name).
10. Choose Vision Operations as the Operating Unit.
11. (T) Lines
12. Click Go to add lines from the default option, the Catalog.
13. Save your work if prompted.
14. Search for “blue pen” from the Main Store.
15. (B) Go
16. Add 100 blue pens to the purchase order.
17. (B) Add to Document.
18. (B) Complete
19. You should receive an error that you’re trying to add a line that isn’t supported by the document style you are using.
Note that the document style has enforced the business rule built into the style. If you need to order the blue pens, you would have to start over and select the Standard PO document style.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Practice - Create a Purchase Order in the Buyer’s Work Center
Overview
You will now create a purchase order using the Buyer’s Work Center from a requisition created in Oracle iProcurement and by adding a line from the Procurement catalog.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Create a requisition in iProcurement
Create a purchase order from a requisition
.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
(B) Yes, when you receive message that order must be saved.
19. In Main Store, search for DVD-CR.
Note that you are back in the Procurement catalog. It is shared by all Procurement products. The stores and other shopping structures are created using tools in Oracle iProcurement.
20. Change the quantity to 10.
21. (B) Add to Document
22. (B) Complete
23. Pick the end of the month for the Need-By date.
24. (B) Save.
25. (B) Submit. O
racl
e U
nive
rsity
and
Ega
bi S
olut
ions
use
onl
y
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Practice - Create a Purchase Agreement in the Buyer’s Work Center
Overview
This practice provides an opportunity for you to create a purchase agreement in Oracle Purchasing’s Professional Buyer’s Work Center. Procurement professionals face a fast paced world of ever increasing technology changes for communicating and collaborating with suppliers. In this practice you will create a purchase agreement with lines created from the Oracle Procurement catalog and see how a supplier can help the buyer by adding to that agreement.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Buyer Creates Global Blanket Purchase Agreement
Supplier Loads New Items
Buyer Review and Approve New Supplier Items.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Solution - Create a Purchase Agreement in the Buyer’s Work Center
Buyer Creates Global Blanket Purchase Agreement
Purchasing, Vision Operations (USA)
1. Navigate to the Agreements page in the Professional Buyer’s Work Center.
• (N) Buyer Work Center > Agreements
2. Create Global BPA header
• Verify Create field LOV is “Blanket Purchase Agreement”, then click (B) Go
Note: The Agreement tab in the Buyer’s Work Center will ONLY create a global blanket purchase agreement (BPA). So you will NOT see any Global checkbox in the header section, as it is global by default.
3. On the Blanket Purchase Agreement page, enter the following information for the Header:
Field Vision Operations
Operating Unit Vision Operations
Supplier Office Supplies, Inc.
Supplier Site OFFICESUPPLIES
Buyer Your last name, first name
Description XX GBPA
Bill to Location V1- New York City
Default Ship to Location M1- Seattle
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
5. Note the BPA number #___________________________
6. ACTIONS field LOV, choose "Enable Supplier Authoring" and click GO button.
Note the confirmation that the supplier Office Supplies, Inc. can now edit this Blanket Purchase Agreement
VERY IMPORTANT NOTE: This action is to allow the supplier user to modify the BPA and add items. The supplier user cannot create their own BPA. The supplier’s access for this is Oracle iSupplier Portal.
7. (B) Save
At this point the agreement is created (but not approved or processed) and is accessible to the supplier for uploading of items.
Note: You can either choose to have the supplier or the Oracle iProcurement catalog administrator upload items to the purchase agreement. In addition, the buyer can upload items. For this practice we will have the supplier upload the items.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
8. Logout and log into Oracle iSupplier Portal − Username / password = supplier / welcome − Responsibility = iSupplier Portal Full Access
iSupplier Portal homepage opens. The Orders at a Glance table will only show Approved POs.
9. Navigate to the Update Blanket Purchase Agreement page for your agreement:
• Click the Notifications link on the Home tab related to your agreement number
• After confirming the information that indicates this is the agreement that you created, click (H) Edit Agreement
OR
• (T) Orders
• (T) Agreements > (B) Search
• Enter your agreement number in Agreement
• (B) Go • Open your agreement by clicking the Agreement link
• Select Edit Agreement in Actions list and click (B) Go 10. Prepare agreement to add new line items:
• (B) Add 5 Rows
Note: The supplier can manually add items to the GBPA or could upload a file of many items using the Via Upload action. In this practice the supplier has been asked to add two specialty papers that are not part of their basic catalog.
11. Add two new lines:
Line 1 Line2
Type Goods Goods
Item
Description HP Brochure Paper - Glossy 8.5x11" 150 Sheets
HP Presentation Paper - Glossy 8.5x11" 300 Sheets
Category SUPPLIES.OFFICE SUPPLIES.OFFICE
Unit Each Each
Price 9.00 16.00
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Note confirmation that Blanket Purchase Agreement #### has been submitted for approval. Also note that if you query the supplier’s agreements, the Status column is “Supplier Change Pending.”
14. Logout as supplier user
Buyer Review and Approve New Supplier Items
15. Logon to the system using the XXUSER you created earlier.
• Purchasing, Vision Operations (USA)
16. Navigate to the Agreements page.
• (N) Buyer Work Center > Agreements
17. Accept the supplier entered items:
• Select the “My Agreements With Pending Change Requests” View and click (B) Go
• (N) Select Agreement: Respond to Change Requests and click (B) Go
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
The Respond to Change Requests page allows the buyer to decide item by item to either accept or reject. You can also click on the Details icon to see all the attributes for each item (Image filenames, price breaks, and so forth).
18. (B) Accept All
19. Query your agreement, it is now or will be shortly displayed with a status Approved.
• (T) Agreements
• (B) Search
• Select “Show table data when any condition is met” and enter your agreement number.
• (B) Go
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice you will create a standard receipt against the purchase order you created in the prior practice.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System
1. Log on to the system using the following information. − Responsibility = Purchasing, Vision Operations
Find Expected Receipts
2. Open the Find Expected Receipts window: − Purchase Order = Your Purchase Order from the AutoCreate a Purchase Order
Fill in Receipt Header Details − Packing Slip = PS-XX − Freight Carrier = UPS
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Process a Standard Receipt − Quantity = 2 − Destination Type = Expense − Location = M1-Seattle − Requestor = Smith, Mr. Jonathan
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
• You can use iSupplier Portal to allow your suppliers to record ASNs. Deliveries must still be processed using this window, but much of the information will already be recorded and as a result, receipt processing cost and time will be lower.
• You can only override the default destination type if the RCV: Allow Routing Override is set to Yes.
• The RCV: Processing Mode profile option determines how receipts are processed: Setting Meaning
Online The user will not be able to perform any other application activities until the process completes.
Immediate The window will start running Receiving Transaction Processor as a background process. The system will not hold the screen and the user can do something else..
Batch Control is returned to the User immediately so other application activities may be performed. The transaction will be processed by running Concurrent Program Receiving Transaction Processor (RVCTP). Typically, customers will run this program periodically based on their processing and system requirements.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
1. Log on to the system using the following information. − Responsibility = Purchasing, Vision Operations
Find Expected Receipts
2. Open the Find Expected Receipts window:
• (N) Receiving > Receipts (M1 - Seattle Manufacturing) − Operating Unit = Vision Operations − Purchase Order = Your Purchase Order from previous practice. − Supplier = Advanced Network Devices − Item = XXSoftware
3. (B) Find
Fill in Receipt Header Details − Packing Slip = PS-XX − Freight Carrier = UPS
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Process a Standard Receipt
4. (M) Window > Receipts (M1)
5. Select the checkbox to the left of the Quantity field − Quantity = 2 − Destination Type = Expenses − Location = M1-Seattle − Requestor = Defaults
6. Save O
racl
e U
nive
rsity
and
Ega
bi S
olut
ions
use
onl
y
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
• You can only override the default destination type if the RCV: Allow Routing Override is set to Yes.
• You can use iSupplier Portal to allow your suppliers to record ASNs. Deliveries must still be processed using this window, but much of the information will already be recorded and as a result, receipt processing cost and time will be lower.
• The RCV: Processing Mode profile option determines how receipts are processed: Setting Meaning
Online The user will not be able to perform any other application activities until the process completes.
Immediate The window will start running Receiving Transaction Processor as a background process. The system will not hold the screen and the user can do something else..
Batch Control is returned to the User immediately so other application activities may be performed. The transaction will be processed by running Concurrent Program Receiving Transaction Processor (RVCTP). Typically, customers will run this program periodically based on their processing and system requirements.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
In this practice you will create an express receipt against the purchase order you created
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System
1. Log on to the system using the following information. − Responsibility = Purchasing, Vision Operations
Find Expected Receipts
2. Open the Find Expected Receipts window: − Purchase Order = Your Purchase Order from a previous practice − Supplier = XXIBM Corporation − Item = XXSoftware
Note: In order to process an express receipt, all expected receipts queried must be from the same supplier!
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Create the Express Receipt − Destination Type = Final Destination
3. Record your receipt number.
Note: If the Destination Type is Final Destination, to process the receipt as an express receipt, the requestor field must have been filled out on the purchase order or release!
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
1. Log on to the system using the following information. − Responsibility = Purchasing, Vision Operations
Find Expected Receipts
2. (N) Receiving > Receipts (M1 - Seattle Manufacturing) − Purchase Order = Your Purchase Order from a previous practice − Supplier = Advanced Network Devices
3. (B) Find
Note: In order to process an express receipt, all expected receipts queried must be from the same supplier!
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Create the Express Receipt
4. (M) Window > Receipts (M1)
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
5. (B) Express to create an Express receipt. − Destination Type = Final Destination −
6. (B) OK
7. Save
8. (B) Header
9. Record your receipt number.
Note: If the Destination Type is Final Destination, to process the receipt as an express receipt, the requestor field must have been filled out on the purchase order or release!
In this practice you will create a cascade receipt against the purchase order you created.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System
1. Log on to the system using the following information. − Responsibility = Purchasing, Vision Operations
Find Expected Receipts
2. Open the Find Expected Receipts window: − Supplier = Advanced Network Devices − Item = XXMonitor
Note: In order to process a cascade receipt, you must query expected receipts for a specific supplier and item.
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Create the Cascade Receipt − Cascade Quantity = 6 − Unit of Measure = Each
Note: Because the routing type was Standard Routing, these inventory items will show a destination type of Receiving. The items are delivered to inventory in a subsequent step.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Complete the Delivery for the a Line of the Cascade Receipt (we will inspect the other later)
3. Open the Receiving Transactions window:
4. In the Receipt field, enter the number of the Cascade Receipt.
5. Select PO Line 2, Shipment 2 (qty of 2 available to deliver) by selecting the checkbox to the left of the Quantity field. We will inspect the other item in a later lab.
Note: If you did not fill in requestor and subinventory information on the purchase order, you will need to do that now!
Review Receiving Transactions
6. Open the Find Receiving Transactions window.
7. In the Receipt field, enter the receipt number.
8. Review your receipt.
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
Note: The Receipt Header window opens on top of the Receipts window. When you have completed the Receipt Header window, click in the Receipt window, which is located behind the Receipt Header window to navigate to it.
Create the Cascade Receipt
4. (M) Window > Receipts (M1)
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
5. (B) Cascade to create a Cascade receipt. − Cascade Quantity = 6 − Unit of Measure = Each
6. (B) OK
7. Note that the 6 items are applied to the expected receipt.
8. Save
9. (B) Header
10. Record your receipt number.
Note: Because the routing type was Standard Routing, these inventory items will show a destination type of Receiving. The items are delivered to inventory in a subsequent step.
Complete the Delivery for the a Line of the Cascade Receipt (we will inspect the other later)
15. Select PO Line 2, Shipment 2 (qty of 2 available to deliver) by selecting the checkbox to the left of the Quantity field. We will inspect the other item in a later lab.
Note: If you did not fill in requestor and subinventory information on the purchase order, you will need to do that now!
In this practice you will inspect and deliver a receipt. Half of the items you found to be defective. You will deliver half to their final destination and the other half will be returned.
Assumptions
• Replace XX with your terminal number or initials.
• You must have access to an Oracle Application Vision database or comparable training or test instance at your site on which to complete this practice.
• Logon to the system using the XXUSER you created earlier.
Tasks
Log on to the System
1. Log on to the system using the following information. − Responsibility = Purchasing, Vision Operations
Perform a Quality Inspection
2. Open the Receiving Transactions window: − Receipt = Your receipt number
Note: If Oracle Quality is installed and at least one inspection plan exists for the transaction, both the Enter Quality Results option in the Tools menu and the Quality button on the menu bar will be enabled. If the QA: PO Inspection Profile option is set to Quality, when you click the Inspect button, it opens the Quality Inspection window that you defined, instead of the Purchasing Inspection window.
3. Enter inspection results according to the table:
Item Inspect
Result Quantity Quality
Code Reason Code
Comment
XXMonitor Accept 2 Above Average
Blank Passed inspection
XXMonitor Reject 2 Below Average
CompDefect Failed inspection
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED
1. Log on to the system using the following information. − Responsibility = Purchasing, Vision Operations
Perform a Quality Inspection
2. Open the Receiving Transactions window:
• (N) Receiving > Receiving Transactions (M1-Seattle Manufacturing) − Receipt = Your receipt number
3. (B) Find
4. (B) Inspect
Note: If Oracle Quality is installed and at least one inspection plan exists for the transaction, both the Enter Quality Results option in the Tools menu and the Quality button on the menu bar will be enabled. If the QA: PO Inspection Profile option is set to Quality, when you click the Inspect button, it opens the Quality Inspection window that you defined, instead of the Purchasing Inspection window. If the quality window is displayed instead of the Purchasing Inspection window, ask the instructor to change the QA: PO Inspection Profile option to Purchasing.
5. Enter inspection results according to the table:
Item Inspect
Result Quantity Quality
Code Reason Code
Comment
XXMonitor Accept 2 Above Average
Blank Passed inspection
XXMonitor Reject 2 Below Average
CompDefect Failed inspection
6. (B) OK
7. Save
Ora
cle
Uni
vers
ity a
nd E
gabi
Sol
utio
ns u
se o
nly
THESE eKIT MATERIALS ARE FOR YOUR USE IN THIS CLASSROOM ONLY. COPYING eKIT MATERIALS FROM THISCOMPUTER IS STRICTLY PROHIBITED