This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Fixtureworks® stocks a full-line of rollers from Fairlane® Products. No need to spec and wait for a custom roller tobe tooled up and molded. Our lineup is stocked and ready to ship. A lineup that now includes urethane coveredbearing and press fit rollers in addition to our solid, DuraSoft® and finned rollers. They are available in a variety ofstyles, mountings and durometers and can be custom modified to your specific application. And they’re readywhen you need them.
ROLLERS
Solid Rollers have asmooth surface and asolid body.
STYLES MOUNTING
Roller Only style features the rollerpermanently bonded to a steelinsert with snap ring grooves or aprecision press-fit I.D. We alsooffer rollers specifically designed tobe pressed onto a cam follower.
Shaft Drive style features theroller permanently bonded to asteel hub that is designed to bemounted to a round shaft withset screws.
Bearing Mount style featuresone or two bearings held in placewith snap rings or press-fit andbonded into place. Also availableas urethane covered bearings.
Stud Mount style includes theroller with bearings and mountinghardware. In addition, we alsooffer a Clutch Bearing StudMount style which allows theroller to only spin in one direction.
Finned Rollers aregrooved and provideself-cleaning as dirt,debris and liquid passunder the contactsurface of the roller.
MATERIALSRollers are available in three materials to meet a wide range ofapplications and environments. Polyurethane, White Nitrileand Black Neoprene offer different characteristics in terms ofstrength, chemical and environmental resistance and wear.
DUROMETERSRollers are available in different durometers (hardness) tomeet a wide variety of applications. Hardness ranging from astiff foam rubber to a hockey puck allow for use in light andheavy duty applications.
DuraSoft® Rollershave a smooth contactsurface with teardropholes to allow greaterroller compressionunder load.
Urethane Covered Bearing and Press Fit Rollers in 95A are black in color. All other rollers in 95A are orange.All Nitrile Rollers and Bumpers are white. Rubber gripper pads are made from black nitrile. All Neoprene Rollers and Bumpers are black.
Roller and Bumper Material Property Comparison Chart:4 = Excellent 3 = Good 2 = Fair 1 = Poor
Clutch BearingThe following table shows the maximum theoretical radial loads that can be applied to the respective bearings, at aspecified RPM, yielding 1,000,000 revolutions or 500 hours of life. The bearings are shielded and pre-lubricated for life withgrease.
Standard BearingThe following table shows the maximum theoretical radial loads that can be applied to the respective bearings, at aspecified RPM, yielding an average life of 2,500 hours.
BEARING TYPE AStandard Double RowPart # RRBG-D2268-3
Precision BearingThe following table shows the maximum theoretical radial loads that can be applied to the respective bearings, at aspecified RPM, yielding 1,000,000 revolutions or 500 hours of life. The bearings are shielded and pre-lubricated for life withgrease.
BEARING TYPE DPrecision Single RowPart # RRBG-1603-ZZ
Solid rollers have a smooth surface and are permanently bonded to a steel insert. The steel insert provides rigidity and allows the user to customize the mountingconfiguration based on the application. Rollers are available in neoprene, nitrile and urethane materials with hardness ranging from 20 to 95 durometer. See page 519 formaterial and durometer specifications. Line drawings shown are not proportional for all parts. For specific application requirements, custom modifications are availablefor this product line. View and download part CAD models at www.fixtureworks.net. To order part, add desired durometer (xx) to the part number. Sample RR-215-20-R.
DuraSoft rollers have a smooth surface and are permanently bonded to a steel insert. The steel insert provides rigidity and allows the user to customize the mountingconfiguration based on the application. The "teardrop" holes allow the roller to flex for firm yet non-damaging contact. Rollers are available in neoprene, nitrile andurethane materials with hardness ranging from 20 to 95 durometer. See page 519 for material and durometer specifications. Line drawings shown are not proportionalfor all parts. For specific application requirements, custom modifications are available for this product line. View and download part CAD models atwww.fixtureworks.net. To order part, add desired durometer (xx) to the part number. Sample DR-9502-35UR-RP.
Finned rollers have grooves on the surface and are permanently bonded to a steel insert. The steel insert provides rigidity andallows the user to customize the mounting configuration based on the application. The grooves create less surface contacton the work piece and allow dirt, debris and liquids to pass. Rollers are available in neoprene, nitrile and urethane materialswith hardness ranging from 20 to 60 durometer. See page 519 for material and durometer specifications. Line drawings shownare not proportional for all parts. For specific application requirements, custom modifications are available for this productline. View and download part CAD models at www.fixtureworks.net. To order part, add desired durometer (xx) to the partnumber. Sample RR-9250-2-20-RP.
Solid rollers have a smooth surface and are permanently bonded to a bronze insert. The SAE 660 bronze insert provides rigidity as well as self lubrication. Rollers areavailable in neoprene, nitrile and urethane materials with hardness ranging from 60 to 80 durometer. See page 519 for material and durometer specifications. Forspecific application requirements, custom modifications are available for this product line. To order part, add desired durometer (xx) to the part number. Sample RR-125-60.
Part # Material A B C xx = Durometer RR-125-xx Neoprene 2.50 1.125 .501/.504 60 RR-125-xxW Nitrile 2.50 1.125 .501/.504 60 RR-125-xxUR Urethane 2.50 1.125 .501/.504 60 / 80
Finned rollers have grooves on the surface and are permanently bonded to a bronze bushing. The SAE 660 bronze insert provides rigidity as well as self lubrication. Thegrooves create less surface contact on the work piece and allow dirt, debris and liquids to pass. Rollers are available in neoprene and nitrile materials with hardness of60 durometer. See page 519 for material and durometer specifications. For specific application requirements, custom modifications are available for this product line. To order part, add desired durometer (xx) to the part number. Sample RR-125-2F-60.
Part # Material A B C # of Fins xx = Durometer RR-125-2F-xx Neoprene 1.50 1.125 .501/.504 7 60 RR-125-2F-xxW Nitrile 1.50 1.125 .501/.504 7 60RR-125-F-xx Neoprene 2.50 1.125 .501/.504 7 60 RR-125-F-xxW Nitrile 2.50 1.125 .501/.504 7 60
Solid rollers have a smooth surface and are permanently bonded to a steel insert with the bearings held into place with snap rings. They are available with standardbearings, precision bearings and sealed precision bearings based on your application and environment. Rollers are available in neoprene, nitrile and urethane materialswith hardness ranging from 20 to 95 durometer. See page 519 for material and durometer specifications. Line drawings shown are not proportional for all parts. Forspecific application requirements, custom modifications are available for this product line. View and download part CAD models at www.fixtureworks.net. See pages520 and 521 for bearing type specifications. To order part, add desired durometer (xx) to the part number. Sample RR-215-20-B.
DuraSoft rollers have a smooth surface and are permanently bonded to a steel insert with the bearings held into place with snap rings. They are available with standardbearings, precision bearings and sealed precision bearings based on your application and environment. The "teardrop" holes allow the roller to flex for firm yet non-damaging contact. Rollers are available in neoprene, nitrile and urethane materials with hardness ranging from 20 to 95 durometer. See page 519 for material anddurometer specifications. Line drawings shown are not proportional for all parts. For specific application requirements, custom modifications are available for thisproduct line. View and download part CAD models at www.fixtureworks.net. See pages 520 and 521 for bearing type specifications. To order part, add desired durometer(xx) to the part number. Sample DR-9502-35UR-B.
(Ref) # of Bearing Part # Material A B C D E Bearings Type xx = Durometer DR-9502-xxUR-B Urethane 2.50 .92 .500/.505 1.252/1.256 3/8 1 B - Standard 35 / 60 / 80 / 95 DR-9502-xxUR-BP Urethane 2.50 .92 .4997/.5000 1.125/1.128 3/8 1 F - Precision 35 / 60 / 80 / 95 DR-9502-xxUR-BPC Urethane 2.50 .92 .4997/.5000 1.125/1.128 3/8 1 G - Precision Sealed 35 / 60 / 80 / 95 DR-502-xxUR-B Urethane 2.50 1.94 .500/.505 1.252/1.256 3/4 1 C - Standard 35 / 60 / 80 / 95 DR-502-xxUR-BP Urethane 2.50 1.94 .4997/.5000 1.125/1.128 3/4 2 F - Precision 35 / 60 / 80 / 95DR-502-xxUR-BPC Urethane 2.50 1.94 .4997/.5000 1.125/1.128 3/4 2 G - Precision Sealed 35 / 60 / 80 / 95 DR-9754-xx-B Neoprene 4.00 .92 .500/.505 1.252/1.256 3/8 1 B - Standard 20 / 35 DR-9754-xxW-B Nitrile 4.00 .92 .500/.505 1.252/1.256 3/8 1 B - Standard 20 / 35 DR-9754-xxUR-B Urethane 4.00 .92 .500/.505 1.252/1.256 3/8 1 B - Standard 35 / 60 / 80 / 95 DR-9754-xx-BP Neoprene 4.00 .92 .4997/.5000 1.125/1.128 3/8 1 F - Precision 20 / 35 DR-9754-xxW-BP Nitrile 4.00 .92 .4997/.5000 1.125/1.128 3/8 1 F - Precision 20 / 35 DR-9754-xxUR-BP Urethane 4.00 .92 .4997/.5000 1.125/1.128 3/8 1 F - Precision 35 / 60 / 80 / 95 DR-9754-xx-BPC Neoprene 4.00 .92 .4997/.5000 1.125/1.128 3/8 1 G - Precision Sealed 20 / 35 DR-9754-xxW-BPC Nitrile 4.00 .92 .4997/.5000 1.125/1.128 3/8 1 G - Precision Sealed 20 / 35 DR-9754-xxUR-BPC Urethane 4.00 .92 .4997/.5000 1.125/1.128 3/8 1 G - Precision Sealed 35 / 60 / 80 / 95 DR-754-xx-B Neoprene 4.00 1.94 .500/.505 1.252/1.256 3/4 1 C - Standard 20 / 35 DR-754-xxW-B Nitrile 4.00 1.94 .500/.505 1.252/1.256 3/4 1 C - Standard 20 / 35 DR-754-xxUR-B Urethane 4.00 1.94 .500/.505 1.252/1.256 3/4 1 C - Standard 35 / 60 / 80 / 95 DR-754-xx-BP Neoprene 4.00 1.94 .4997/.5000 1.125/1.128 3/4 2 F - Precision 20 / 35 DR-754-xxW-BP Nitrile 4.00 1.94 .4997/.5000 1.125/1.128 3/4 2 F - Precision 20 / 35 DR-754-xxUR-BP Urethane 4.00 1.94 .4997/.5000 1.125/1.128 3/4 2 F - Precision 35 / 60 / 80 / 95 DR-754-xx-BPC Neoprene 4.00 1.94 .4997/.5000 1.125/1.128 3/4 2 G - Precision Sealed 20 / 35 DR-754-xxW-BPC Nitrile 4.00 1.94 .4997/.5000 1.125/1.128 3/4 2 G - Precision Sealed 20 / 35 DR-754-xxUR-BPC Urethane 4.00 1.94 .4997/.5000 1.125/1.128 3/4 2 G - Precision Sealed 35 / 60 / 80 / 95
Finned rollers have grooves on the surface and are permanently bonded to a steel insert with the bearings held into place with snap rings. They are available withstandard bearings, precision bearings and sealed precision bearings based on your application and environment. The grooves create less surface contact on the workpiece and allow dirt, debris and liquids to pass. Rollers are available in neoprene, nitrile and urethane materials with hardness ranging from 20 to 60 durometer. Seepage 519 for material and durometer specifications. Line drawings shown are not proportional for all parts. For specific application requirements, custom modificationsare available for this product line. View and download part CAD models at www.fixtureworks.net. See pages 520 and 521 for bearing type specifications. To order part,add desired durometer (xx) to the part number. Sample RR-9250-2-20-B.
(Ref) # of Bearing # of Part # Material A B C D E Bearings Type Fins xx = DurometerRR-9250-2-xx-B Neoprene 2.00 .92 .500/.505 1.252/1.256 3/8 1 B - Standard 3 20 / 35 / 60RR-9250-2-xxW-B Nitrile 2.00 .92 .500/.505 1.252/1.256 3/8 1 B - Standard 3 20 / 35 / 60RR-9250-2-xxUR-B Urethane 2.00 .92 .500/.505 1.252/1.256 3/8 1 B - Standard 3 35 / 60RR-9250-2-xx-BP Neoprene 2.00 .92 .4997/.5000 1.125/1.128 3/8 1 F - Precision 3 20 / 35 / 60RR-9250-2-xxW-BP Nitrile 2.00 .92 .4997/.5000 1.125/1.128 3/8 1 F - Precision 3 20 / 35 / 60RR-9250-2-xxUR-BP Urethane 2.00 .92 .4997/.5000 1.125/1.128 3/8 1 F - Precision 3 35 / 60RR-9250-2-xx-BPC Neoprene 2.00 .92 .4997/.5000 1.125/1.128 3/8 1 G - Precision Sealed 3 20 / 35 / 60RR-9250-2-xxW-BPC Nitrile 2.00 .92 .4997/.5000 1.125/1.128 3/8 1 G - Precision Sealed 3 20 / 35 / 60RR-9250-2-xxUR-BPC Urethane 2.00 .92 .4997/.5000 1.125/1.128 3/8 1 G - Precision Sealed 3 35 / 60RR-250-2-xx-B Neoprene 2.00 1.94 .500/.505 1.252/1.256 3/4 1 C - Standard 6 20 / 35 / 60RR-250-2-xxW-B Nitrile 2.00 1.94 .500/.505 1.252/1.256 3/4 1 C - Standard 6 20 / 35 / 60RR-250-2-xxUR-B Urethane 2.00 1.94 .500/.505 1.252/1.256 3/4 1 C - Standard 6 35 / 60RR-250-2-xx-BP Neoprene 2.00 1.94 .4997/.5000 1.125/1.128 3/4 2 F - Precision 6 20 / 35 / 60RR-250-2-xxW-BP Nitrile 2.00 1.94 .4997/.5000 1.125/1.128 3/4 2 F - Precision 6 20 / 35 / 60RR-250-2-xxUR-BP Urethane 2.00 1.94 .4997/.5000 1.125/1.128 3/4 2 F - Precision 6 35 / 60RR-250-2-xx-BPC Neoprene 2.00 1.94 .4997/.5000 1.125/1.128 3/4 2 G - Precision Sealed 6 20 / 35 / 60RR-250-2-xxW-BPC Nitrile 2.00 1.94 .4997/.5000 1.125/1.128 3/4 2 G - Precision Sealed 6 20 / 35 / 60RR-250-2-xxUR-BPC Urethane 2.00 1.94 .4997/.5000 1.125/1.128 3/4 2 G - Precision Sealed 6 35 / 60RR-9250-xx-B Neoprene 2.50 .92 .500/.505 1.252/1.256 3/8 1 B - Standard 3 20 / 35 / 60RR-9250-xxW-B Nitrile 2.50 .92 .500/.505 1.252/1.256 3/8 1 B - Standard 3 20 / 35 / 60RR-9250-xxUR-B Urethane 2.50 .92 .500/.505 1.252/1.256 3/8 1 B - Standard 3 35 / 60RR-9250-xx-BP Neoprene 2.50 .92 .4997/.5000 1.125/1.128 3/8 1 F - Precision 3 20 / 35 / 60RR-9250-xxW-BP Nitrile 2.50 .92 .4997/.5000 1.125/1.128 3/8 1 F - Precision 3 20 / 35 / 60RR-9250-xxUR-BP Urethane 2.50 .92 .4997/.5000 1.125/1.128 3/8 1 F - Precision 3 35 / 60RR-9250-xx-BPC Neoprene 2.50 .92 .4997/.5000 1.125/1.128 3/8 1 G - Precision Sealed 3 20 / 35 / 60RR-9250-xxW-BPC Nitrile 2.50 .92 .4997/.5000 1.125/1.128 3/8 1 G - Precision Sealed 3 20 / 35 / 60RR-9250-xxUR-BPC Urethane 2.50 .92 .4997/.5000 1.125/1.128 3/8 1 G - Precision Sealed 3 35 / 60RR-250-xx-B Neoprene 2.50 1.94 .500/.505 1.252/1.256 3/4 1 C - Standard 6 20 / 35 / 60RR-250-xxW-B Nitrile 2.50 1.94 .500/.505 1.252/1.256 3/4 1 C - Standard 6 20 / 35 / 60RR-250-xxUR-B Urethane 2.50 1.94 .500/.505 1.252/1.256 3/4 1 C - Standard 6 35 / 60RR-250-xx-BP Neoprene 2.50 1.94 .4997/.5000 1.125/1.128 3/4 2 F - Precision 6 20 / 35 / 60RR-250-xxW-BP Nitrile 2.50 1.94 .4997/.5000 1.125/1.128 3/4 2 F - Precision 6 20 / 35 / 60RR-250-xxUR-BP Urethane 2.50 1.94 .4997/.5000 1.125/1.128 3/4 2 F - Precision 6 35 / 60RR-250-xx-BPC Neoprene 2.50 1.94 .4997/.5000 1.125/1.128 3/4 2 G - Precision Sealed 6 20 / 35 / 60RR-250-xxW-BPC Nitrile 2.50 1.94 .4997/.5000 1.125/1.128 3/4 2 G - Precision Sealed 6 20 / 35 / 60RR-250-xxUR-BPC Urethane 2.50 1.94 .4997/.5000 1.125/1.128 3/4 2 G - Precision Sealed 6 35 / 60RR-667-xx-B Neoprene 4.00 1.94 .500/.505 1.252/1.256 3/4 1 C - Standard 8 35 / 60RR-667-xxW-B Nitrile 4.00 1.94 .500/.505 1.252/1.256 3/4 1 C - Standard 8 35 / 60RR-667-xxUR-B Urethane 4.00 1.94 .500/.505 1.252/1.256 3/4 1 C - Standard 8 35 / 60RR-667-xx-BP Neoprene 4.00 1.94 .4997/.5000 1.125/1.128 3/4 2 F - Precision 8 35 / 60RR-667-xxW-BP Nitrile 4.00 1.94 .4997/.5000 1.125/1.128 3/4 2 F - Precision 8 35 / 60RR-667-xxUR-BP Urethane 4.00 1.94 .4997/.5000 1.125/1.128 3/4 2 F - Precision 8 35 / 60RR-667-xx-BPC Neoprene 4.00 1.94 .4997/.5000 1.125/1.128 3/4 2 G - Precision Sealed 8 35 / 60RR-667-xxW-BPC Nitrile 4.00 1.94 .4997/.5000 1.125/1.128 3/4 2 G - Precision Sealed 8 35 / 60RR-667-xxUR-BPC Urethane 4.00 1.94 .4997/.5000 1.125/1.128 3/4 2 G - Precision Sealed 8 35 / 60
These covered bearings have a smooth urethane surface that is cast directly to a precision sealed ball bearing. They provide smooth, quiet and non-marring operation.The urethane provides excellent abrasion resistance and durability. They are available with hardness ranging from 35 to 95 durometer. See page 519 for material anddurometer specifications. Line drawings shown are not proportional for all parts. For specific application requirements, custom modifications are available for thisproduct line. View and download part CAD models at www.fixtureworks.net.To order part, add desired durometer (xx) to the part number. Sample CB-041605-35UR.
Solid rollers have a smooth surface and are permanently bonded to a steel insert with the bearings held in place with snap rings. They come assembled with a sockethead cap screw, spacer and locknut for fast easy mounting. They are available with standard bearings, precision bearings and sealed precision bearings based on yourapplication and environment. Rollers are available in neoprene, nitrile and urethane materials with hardness ranging from 20 to 95 durometer. See page 519 for materialand durometer specifications. Line drawings shown are not proportional for all parts. For specific application requirements, custom modifications are available for thisproduct line. View and download part CAD models at www.fixtureworks.net. See pages 520 and 521 for bearing type specifications. To order part, add desired durometer(xx) to the part number. Sample RR-215-20-C.
These covered bearings have a smooth urethane surface that is cast to the precision sealed ball bearing. They provide smooth, quiet and non-marring operation. Theurethane provides excellent abrasion resistance and durability. They are available with hardness ranging from 35 to 95 durometer. They come assembled with a buttonhead cap screw, spacer and locknut for fast easy mounting. See page 519 for material and durometer specifications. Line drawings shown are not proportional for allparts. Urethane diameter can be turned down to meet specific application requirements. For specific application requirements, custom modifications are available forthis product line. View and download part CAD models at www.fixtureworks.net. To order part, add desired durometer (xx) to the part number. Sample CB-041605-35UR-C.
DuraSoft rollers have a smooth surface and are permanently bonded to a steel insert with the bearings held in place with snap rings. They come assembled with asocket head cap screw, spacer and locknut for fast easy mounting. They are available with standard bearings, precision bearings and sealed precision bearings basedon your application and environment. The "teardrop" holes allow the roller to flex for firm yet non-damaging contact. Rollers are available in neoprene, nitrile andurethane materials with hardness ranging from 20 to 95 durometer. See page 519 for material and durometer specifications. Line drawings shown are not proportionalfor all parts. For specific application requirements, custom modifications are available for this product line. View and download part CAD models atwww.fixtureworks.net. See pages 520 and 521 for bearing type specifications. To order part, add desired durometer (xx) to the part number. Sample DR-9502-35UR-C.
# Of Bearing Part # Material A B C D E Bearings Type xx = DurometerDR-9502-xxUR-C Urethane 2.50 .92 1/2-13x1.75 BHCS 1.10 .12 1 B - Standard 35 / 60 / 80 / 95DR-9502-xxUR-CP Urethane 2.50 .92 1/2-13x1.75 LHCS 1.10 .12 1 F - Precision 35 / 60 / 80 / 95DR-9502-xxUR-CPC Urethane 2.50 .92 1/2-13x1.75 LHCS 1.10 .12 1 G - Precision Sealed 35 / 60 / 80 / 95DR-502-xxUR-C Urethane 2.50 1.94 1/2-13x2.75 SHCS 1.41 .25 1 C - Standard 35 / 60 / 80 / 95DR-502-xxUR-CP Urethane 2.50 1.94 1/2-13x2.75 SHCS 1.41 .25 2 F - Precision 35 / 60 / 80 / 95DR-502-xxUR-CPC Urethane 2.50 1.94 1/2-13x2.75 SHCS 1.41 .25 2 G - Precision Sealed 35 / 60 / 80 / 95DR-9754-xx-C Neoprene 4.00 .92 1/2-13x1.75 BHCS 1.10 .12 1 B - Standard 20 / 35 DR-9754-xxW-C Nitrile 4.00 .92 1/2-13x1.75 BHCS 1.10 .12 1 B - Standard 20 / 35 DR-9754-xxUR-C Urethane 4.00 .92 1/2-13x1.75 BHCS 1.10 .12 1 B - Standard 35 / 60 / 80 / 95DR-9754-xx-CP Neoprene 4.00 .92 1/2-13x1.75 LHCS 1.10 .12 1 F - Precision 20 / 35 DR-9754-xxW-CP Nitrile 4.00 .92 1/2-13x1.75 LHCS 1.10 .12 1 F - Precision 20 / 35 DR-9754-xxUR-CP Urethane 4.00 .92 1/2-13x1.75 LHCS 1.10 .12 1 F - Precision 35 / 60 / 80 / 95DR-9754-xx-CPC Neoprene 4.00 .92 1/2-13x1.75 LHCS 1.10 .12 1 G - Precision Sealed 20 / 35 DR-9754-xxW-CPC Nitrile 4.00 .92 1/2-13x1.75 LHCS 1.10 .12 1 G - Precision Sealed 20 / 35 DR-9754-xxUR-CPC Urethane 4.00 .92 1/2-13x1.75 LHCS 1.10 .12 1 G - Precision Sealed 35 / 60 / 80 / 95DR-754-xx-C Neoprene 4.00 1.94 1/2-13x2.75 SHCS 1.41 .25 1 C - Standard 20 / 35 DR-754-xxW-C Nitrile 4.00 1.94 1/2-13x2.75 SHCS 1.41 .25 1 C - Standard 20 / 35 DR-754-xxUR-C Urethane 4.00 1.94 1/2-13x2.75 SHCS 1.41 .25 1 C - Standard 35 / 60 / 80 / 95DR-754-xx-CP Neoprene 4.00 1.94 1/2-13x2.75 SHCS 1.41 .25 2 F - Precision 20 / 35 DR-754-xxW-CP Nitrile 4.00 1.94 1/2-13x2.75 SHCS 1.41 .25 2 F - Precision 20 / 35 DR-754-xxUR-CP Urethane 4.00 1.94 1/2-13x2.75 SHCS 1.41 .25 2 F - Precision 35 / 60 / 80 / 95DR-754-xx-CPC Neoprene 4.00 1.94 1/2-13x2.75 SHCS 1.41 .25 2 G - Precision Sealed 20 / 35 DR-754-xxW-CPC Nitrile 4.00 1.94 1/2-13x2.75 SHCS 1.41 .25 2 G - Precision Sealed 20 / 35 DR-754-xxUR-CPC Urethane 4.00 1.94 1/2-13x2.75 SHCS 1.41 .25 2 G - Precision Sealed 35 / 60 / 80 / 95
Finned rollers have grooves on the surface and are permanently bonded to a steel insert with the bearings held in place with snap rings. They come assembled with asocket head cap screw, spacer and locknut for fast easy mounting. They are available with standard bearings, precision bearings and sealed precision bearings basedon your application and environment. The grooves create less surface contact on the work piece and allow dirt, debris and liquids to pass. Rollers are available inneoprene, nitrile and urethane materials with hardness ranging from 20 to 60 durometer. See page 519 for material and durometer specifications. Line drawings shownare not proportional for all parts. For specific application requirements, custom modifications are available for this product line. View and download part CAD models atwww.fixtureworks.net. See pages 520 and 521 for bearing type specifications. To order part, add desired durometer (xx) to the part number. Sample RR-9250-2-20-C.
1.50" Dia. x 1.25" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 20 BR-215-20-* BR-215-20W-* - 35 BR-215-35-* BR-215-35W-* BR-215-35UR-* 60 BR-215-60-* BR-215-60W-* BR-215-60UR-* 80 BR-215-80-* BR-215-80W-* BR-215-80UR-* 95 — — BR-215-95UR-**Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction. Note: Supplied with type H bearing.
2.00" Dia. x .92" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 20 BR-92020-20-* BR-92020-20W-* - 35 BR-92020-35-* BR-92020-35W-* BR-92020-35UR-* 60 BR-92020-60-* BR-92020-60W-* BR-92020-60UR-* 80 BR-92020-80-* BR-92020-80W-* BR-92020-80UR-* 95 — — BR-92020-95UR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
2.00" Dia. x 1.94" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 20 BR-2020-20-* BR-2020-20W-* - 35 BR-2020-35-* BR-2020-35W-* BR-2020-35UR-* 60 BR-2020-60-* BR-2020-60W-* BR-2020-60UR-* 80 BR-2020-80-* BR-2020-80W-* BR-2020-80UR-* 95 — — BR-2020-95UR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
Solid rollers have a smooth surface and are permanently bonded to a steelinsert with the bearing pack pressed in place. The clutch bearings allowthe roller to only turn in one direction. They come assembled with athreaded stripper bolt and snap ring for fast easy mounting. Rollers areavailable in neoprene, nitrile and urethane materials with hardness rangingfrom 20 to 95 durometer. See page 519 for material and durometerspecifications. For specific application requirements, custom modificationsare available for this product line. View and download part CAD models atwww.fixtureworks.net. All the rollers below have a type I bearing exceptthe 1.50 Dia. x 1.25 Width rollers which are supplied with type H bearings.See pages 520 and 521 for bearing type specifications. Available in eitherright or left hand rotation. With the stud pointed upward, right hand rotationturns clockwise and left hand rotation turns counter-clockwise.
2.50" Dia. x .92" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 20 BR-9502-20-* BR-9502-20W-* - 35 BR-9502-35-* BR-9502-35W-* BR-9502-35UR-* 60 BR-9502-60-* BR-9502-60W-* BR-9502-60UR-* 80 BR-9502-80-* BR-9502-80W-* BR-9502-80UR-* 95 — — BR-9502-95UR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
2.50" Dia. x 1.94" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 20 BR-502-20-* BR-502-20W-* - 35 BR-502-35-* BR-502-35W-* BR-502-35UR-* 60 BR-502-60-* BR-502-60W-* BR-502-60UR-* 80 BR-502-80-* BR-502-80W-* BR-502-80UR-* 95 — — BR-502-95UR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
4.00" Dia. x .92" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 20 BR-9754-20-* BR-9754-20W-* - 35 BR-9754-35-* BR-9754-35W-* BR-9754-35UR-* 60 BR-9754-60-* BR-9754-60W-* BR-9754-60UR-* 80 BR-9754-80-* BR-9754-80W-* BR-9754-80UR-* 95 — — BR-9754-95UR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
4.00" Dia. x 1.94" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 20 BR-754-20-* BR-754-20W-* - 35 BR-754-35-* BR-754-35W-* BR-754-35UR-* 60 BR-754-60-* BR-754-60W-* BR-754-60UR-* 80 BR-754-80-* BR-754-80W-* BR-754-80UR-* 95 — — BR-754-95UR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
2.50" Dia. x .92" Width Urethane Durometer Part # 35 DR-9502-35UR-BR-* 60 DR-9502-60UR-BR-* 80 DR-9502-80UR-BR-* 95 DR-9502-95UR-BR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
2.50" Dia. x 1.94" Width Urethane Durometer Part # 35 DR-502-35UR-BR-* 60 DR-502-60UR-BR-* 80 DR-502-80UR-BR-* 95 DR-502-95UR-BR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
4.00" Dia. x .92" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 20 DR-9754-20-BR-* DR-9754-20W-BR-* - 35 DR-9754-35-BR-* DR-9754-35W-BR-* DR-9754-35UR-BR-* 60 — — DR-9754-60UR-BR-* 80 — — DR-9754-80UR-BR-* 95 — — DR-9754-95UR-BR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
4.00" Dia. x 1.94" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 20 DR-754-20-BR-* DR-754-20W-BR-* - 35 DR-754-35-BR-* DR-754-35W-BR-* DR-754-35UR-BR-* 60 — — DR-754-60UR-BR-* 80 — — DR-754-80UR-BR-* 95 — — DR-754-95UR-BR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
DuraSoft rollers have a smooth surface and are permanently bonded to a steel insert with the bearingpack pressed in place. The clutch bearings allow the roller to only turn in one direction. They comeassembled with a threaded stripper bolt and snap ring for fast easy mounting. The "teardrop" holesallow the roller to flex for firm yet non-damaging contact. Rollers are available in neoprene, nitrile and urethane materials withhardness ranging from 20 to 95 durometer. See page 519 for material and durometer specifications. For specific applicationrequirements, custom modifications are available for this product line. View and download part CAD models atwww.fixtureworks.net. All the rollers below have a type I bearing. See pages 520 and 521 for bearing type specifications. Availablein either right or left hand rotation. With the stud pointed upward, right hand rotation turns clockwise and left hand rotation turnscounter-clockwise.
STUD MOUNT –ONE DIRECTIONAL CLUTCH BEARING –DURASOFT®
2.00" Dia. x .92" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 20 BR-9250-2-20-* BR-9250-2-20W-* - 35 BR-9250-2-35-* BR-9250-2-35W-* BR-9250-2-35UR-* 60 BR-9250-2-60-* BR-9250-2-60W-* BR-9250-2-60UR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
2.00" Dia. x 1.94" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 20 BR-250-2-20-* BR-250-2-20W-* - 35 BR-250-2-35-* BR-250-2-35W-* BR-250-2-35UR-* 60 BR-250-2-60-* BR-250-2-60W-* BR-250-2-60UR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
2.50" Dia. x .92" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 20 BR-9250-20-* BR-9250-20W-* - 35 BR-9250-35-* BR-9250-35W-* BR-9250-35UR-* 60 BR-9250-60-* BR-9250-60W-* BR-9250-60UR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
STUD MOUNT –ONE DIRECTIONAL CLUTCH BEARING – FINNED
How To Use
Finned rollers have grooves on the surface and are permanently bonded to a steel insert with the bearing pack pressed in place. The clutch bearings allow the roller toonly turn in one direction. They come assembled with a threaded stripper bolt and snap ring for fast easy mounting. The grooves create less surface contact on the workpiece and allow dirt, debris and liquids to pass. Rollers are available in neoprene, nitrile and urethane materials with hardness ranging from 20 to 60 durometer. Seepage 519 for material and durometer specifications. For specific application requirements, custom modifications are available for this product line. View and downloadpart CAD models at www.fixtureworks.net. All the rollers below have a type I bearing. See pages 520 and 521 for bearing type specifications. Available in either right orleft hand rotation. With the stud pointed upward, right hand rotation turns clockwise and left hand rotation turns counter-clockwise.
2.50" Dia. x 1.94" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 20 BR-250-20-* BR-250-20W-* - 35 BR-250-35-* BR-250-35W-* BR-250-35UR-* 60 BR-250-60-* BR-250-60W-* BR-250-60UR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
4.00" Dia. x 1.94" Width Neoprene Nitrile Urethane Durometer Part # Part # Part # 35 BR-667-35-* BR-667-35W-* BR-667-35UR-* 60 BR-667-60-* BR-667-60W-* BR-667-60UR-* *Add "R" to the end of the part number for right rolling direction. Add "L" to the end of the part number for leftrolling direction.
STUD MOUNT –ONE DIRECTIONAL CLUTCH BEARING – FINNED
Solid rollers have a smooth surface and are permanently bonded to a steel insert. Designed to be mounted on a shaft.A hub extends past the roller and is supplied with two set screws (90 degrees apart) to fasten onto the shaft. Rollers areavailable in neoprene, nitrile and urethane materials with hardness ranging from 20 to 95 durometer. See page 519 formaterial and durometer specifications. Line drawings shown are not proportional for all parts. For specific applicationrequirements, custom modifications are available for this product line. View and download part CAD models atwww.fixtureworks.net. To order part, add desired durometer (xx) to the part number. Sample RR-215-20-EX375.
Finned rollers have grooves on the surface and are permanently bonded to a steel insert. Designed to be mounted on a shaft. A hub extends past the roller and issupplied with two set screws (90 degrees apart) to fasten onto the shaft. The grooves create less surface contact on the work piece and allow dirt, debris and liquids topass. Rollers are available in neoprene, nitrile and urethane materials with hardness ranging from 20 to 60 durometer. See page 519 for material and durometerspecifications. Line drawings shown are not proportional for all parts. For specific application requirements, custom modifications are available for this product line.View and download part CAD models at www.fixtureworks.net. To order part, add desired durometer (xx) to the part number. Sample RR-9250-2-20-EX500.
DuraSoft rollers have a smooth surface and are permanently bonded to a steel insert. Designed to bemounted on a shaft. A hub extends past the roller and is supplied with two set screws (90 degrees apart)to fasten onto the shaft. The "teardrop" holes allow the roller to flex for firm yet non-damaging contact.Rollers are available in neoprene, nitrile and urethane materials with hardness ranging from 20 to 95durometer. See page 519 for material and durometer specifications. Line drawings shown are notproportional for all parts. For specific application requirements, custom modifications are available forthis product line. View and download part CAD models at www.fixtureworks.net. To order part, adddesired durometer (xx) to the part number. Sample DR-9502-35UR-EX500.