r e s Roof Edge Systems - Metal-Era, Inc.800-445-1500 • Presto-Tite Fascia Fully Adhered orMechanically Attached Single-Ply 24 ga. & .040”fascia cover System Benefits Johns Manville

Roof

Edg

e Sy

stem

s

www.jm.com

fasc ia coping gutter

downspout accessor ies

custom edges

fasc ia coping gutter

downspout accessor ies

custom edges

fasc ia coping gutter

downspout accessor ies

custom edges

fasc ia coping gutter

downspout accessor ies

custom edges

fasc ia coping gutter

downspout accessor ies

custom edges

fasc ia coping gutter

downspout accessor ies

custom edges

fasc ia coping gutter

downspout accessor ies

custom edges

fasc ia coping gutter

downspout accessor ies

custom edges

fasc ia coping gutter

downspout accessor ies

custom edges

fasc ia coping gutter

downspout accessor ies

custom edges

Presto-Lock Coping

Presto-Weld Drip Edge

Presto-Tite F

asci

a

Overview • Full system is covered under one warranty

• Custom & radius profiles available; can accommodate multiple nailers

• Slotted fastening holes for proper thermal movement & correct fastener placement

• Available in standard & custom finishes

Installation Benefits• Non-penetrating design eliminates

stripping in or heat-welding, typical of other designs

• Pre-fabricated miters & accessories ensure a proper fit & save time & labor by eliminating field fabrication

• 12’ lengths

• No unsightly cover plates

• Full snap on design for easy installation

• Arrives at the job site with all fasten ers, splice plates and drivers included (Sealant and fasteners provided by others for Presto-Lock Fascia)

Testing

800-445-1500 • www.jm.com

Presto-Tite FasciaFully Adhered or Mechanically Attached Single-Ply

24 ga. & .040” fascia cover

System Benefits

Johns Manville Roof Edges

Johns Manville’s line of roof edge systems is engineered and tested to withstand the harshest of conditions and is specifically designed to compliment the Johns Manville

line of roof systems. The roof edge is the most vulnerable part of the roof because it is subject to wind forces that greatly impact the integrity of the entire roof system. Johns Manville can provide a full system warranty that covers both the membrane and the roof edge. Check with your Johns Manville sales representative.

Presto-Tite Fascia Built-Up or Modified Version

24 ga. & .040” fascia cover

Presto-Tite Extended Fascia Single-Ply Version

Presto-Tite Canted Fascia Existing Beveled Wood Nailer Version

22 ga, 24 ga, .040, .050” & .063” fascia cover

Presto-Lock Fascia Fully Adhered or Mechanically Attached Single-Ply (shown) & Built-

Up or Modified Versions 24 ga., .040”, .050” & .063” fascia cover

Presto-Tite Extended FasciaFully Adhered or Mechanically Attached Single-Ply (shown) & Built-

Up or Modified Versions 22 ga., .050” & .063” fascia cover

Presto-Tite Canted Fascia Galvanized Waterdam Version

22 ga, 24 ga, .040, .050” & .063” fascia cover

Presto-Lock CopingTapered (shown), Flat or Existing Slope Versions

24 ga., .040”, .050” & .063” coping cover

Johns Manville Roof Edges

Presto-Tite Fascia HG Fully Adhered or Mechanically Attached Single-Ply (shown) & Built-Up or

Modified Versions.050” & .063” fascia cover

51 Lexington Street Lewiston, ME 04240p: 800-445-1500f: 207-784-0125

www.jm.com

© 2017. By presenting this catalog, Johns Manville does not claim to serve in any but an advisory capacity and can undertake no liability. If necessary, all recommendations contained herein regarding the use of our products should be modified to conform with local conditions and the materials employed. Johns Manville reserves the right to make changes or to amend any of the information contained in this publication, whether to present new information obtained, or as needed to conform to a specified project, job or climactic condition. 0416

Materials & Finishes

Johns Manville also offers standard coil anodized finishes in clear, medium bronze, dark bronze and black. In addition to our standard finishes, Johns Manville can provide custom color, postcoated Kynar paint finishes and batch anodized finishes on all mill aluminum gauges listed.

IMPORTANT NOTE: Due to shade variations in the anodizing process and mill finishes, it is recommended that the contractor work with the architect or building owner to sort and install products according to the owner’s preference. Johns Manville offers no warranty to anodized or mill finishes and will not be held responsible for shade variations inherent to the anodizing process.

Kynar based fluropolymer coating is a high-grade architectural finish offering excellent resistance to degradation caused by nature’s elements and airborne contaminants. A limited thirty (20) year warranty is available on the standard coil-coated colors shown. A limited thirty (30) year warranty is available on custom, postcoated aluminum applications.

These color samples are printer’s reproductions and may vary slightly from actual colors supplied. Finished color chip samples are available upon request. Johns Manville will not be held responsible for color selections chosen from printed literature.

Kynar 500® is a registered trademark of Elf Atochem, North America, Inc.

Other Available Finishes:Galvanized Steel: 16 ga., 20 ga., 24 ga. & 22 ga.110 Copper: 16 oz. & 20 oz.304-2B Stainless Steel: 24 ga., 22 ga. & 20 ga.

Almond

Matte Black

Champagne (Metallic)

Sandstone

Burgundy (Brandywine)

Weathered Zinc

Dark Bronze

Teal

Mansard Brown

Patina Green

Cityscape

Terra Cotta

Zinc

Slate Gray

Cardinal (Regal) Red

Silversmith

Hunter Green

Clear Anodized

Hartford Green Colonial Red

Hemlock Green Forest (Sherwood) Green

Stone White

Charcoal (Charcoal Gray)

(Classic) Copper Penny

Bone White

Midnight (Extra Dark) Bronze

Silver (Metallic)**

Sierra Tan

Sky (Military) Blue

Sand Stone *

Medium Bronze

Interstate (Regal) Blue

Express Colors –

Standard Colors –

Premium Colors –

Award Blue

EvergreenMusket GrayGranite Slate Blue

Aged Copper

Mill Finish