Quick Operation Guide

Quick Operation Guide

System Controller

WV-CU650Main FunctionsMain Functions

(1) WV-CU650 Start Up(1) WV-CU650 Start Up

Login

1. Turn on the power and wait for the Login standby display.

2. Press the CAM(SET) button, then enter the User ID by using the numeric buttons and press the CAM(SET) button.

Default Setting User ID: 650 Password: 650

3. Enter the password by using the numeric buttons and press the CAM(SET) button.

Display

Display

* After more than 5 seconds with no operation, display returns to Login standby.

CAM(SET)

Recording/Playback/Search Login ID input Camera and Monitor Select

HD300 recording or playback operation from CU650 is possible only when selecting “Monitor 2 output” of HD300.

ideas for life

Camera Setting and Operation

Move cursor

Display

3. Following filtering option can be selected by pressing the

CAM(SET) button after STEP 2 mentioned above.

2. Select a searching filter by moving the joystick to the left or right.

<Filtering option>

Filtering by time and date

Move the cursor by joystick and rotate jog dial to enter time and date. Press CAM(SET) button to determine.

Filtering by recording event

Move the cursor to select the event and rotate jog dial to select ON. Press CAM(SET) button to determine.

Filtering by text

Rotate jog dial to select OFF, with TEXT or without TEXT. Press CAM(SET) button to determine.

Filtering by camera channel

Select camera channel numbers with joystick and apply filtering with jog dial. Press CAM(SET) button to determine.

1. Recorded Event List is displayed when pressing the SEARCH button twice. Recorded Event List display

(2) WJ-HD300 Recording and Playback(2) WJ-HD300 Recording and PlaybackSearch Event Records11

* Select the UNLOCK FILTER and press the CAM(SET) button to cancel the selected filter.

3. Move the cursor by moving the joystick up and down and rotate the jog dial to select a recorded event to be played. Press the

PLAYBACK/SEARCH button to playback the recorded event.

Fast Forward / Fast Reverse Playback22

Skip33

* If there is no next or previous recorded image, current playback will be continued.

Rotate the Shuttle Ring during playbackRotating the Shuttle Ring clockwise: Fast Forward Rotated degree will change the speed. (1/2x, 1x, 2x, 5x, 10x, 20x, 50x)Rotating the Shuttle Ring counterclockwise: Fast Reverse Rotated degree will change the speed. (1/2x, 1x, 2x, 5x, 10x, 20x, 50x)

<SHUTTLE HOLD>Press the SHUTTLE HOLD button while holding the rotated shuttle ring to maintain a desired playback speed. To return to the normal playback speed, press the SET button.

Rotating the Jog Dial clockwise: Skip to the next recorded imageRotating the Jog Dial counterclockwise: Skip to the previous recorded image

Shuttle Ring

Jog dial

Joystick

SEARCH

CAM(SET)

PLAY/PAUSE

SHUTTLE HOLD

Jog Dial

* If wrong operation, press EXIT to return to normal screen.

Rotate the Jog Dial during playback

(3) Select Camera and Monitor(3) Select Camera and Monitor

Select Monitor11

Select Camera22

1. Select the monitor number to be displayed by numeric buttons and press the MON(ESC) button to determine.

* If an invalid monitor number is selected, it returns to the previously selected monitor.

* If an invalid camera number is selected, “Invalid” appears on the display and the previously selected camera is displayed.

2. Select the camera number to be monitored by numeric buttons and press the CAM(SET) button to determine.

<About Display>

Current Selected Monitor

Current Selected Camera

Numeric Key display and System Unit Number

MON(ESC)

CAM(SET)

(4) Camera Operation(4) Camera Operation

22

Pan / Tilt Operation11

2. Move the joystick to the desired direction for pan / tilt control.

Zoom Operation

11 Iris Adjustment

22 Focus Adjustment

Valid only for the Panasonic unitized camera such asWV-NS324/CS564/CS854B/CW864A etc.

1. Enter the camera number to be operated by pressing the numeric buttons and press the CAM(SET) button.

2. Move the zoom wheel to the desired position for telephoto image and wide image.

2. The Iris can be adjusted by pressing the Iris Open or Iris Close button.

* To reset the Iris press the “A” button

(5) Camera Adjustment(5) Camera Adjustment

Joystick

CAM(SET)

Joystick

Iris Button

“A” Button

Top Button

Focus Button

“B” Button

Zoom wheel

Numeric Keys

CAM(SET)

Numeric Keys

CAM(SET)

Numeric Keys

CAM(SET)

Numeric Keys

Numeric Keys

1. Enter the camera number to be operated by pressing the numeric buttons and press the CAM(SET) button.

Numeric Keys

1. Enter the camera number to be operated by pressing the numeric buttons and press the CAM(SET) button.

1. Enter the camera number to be operated by pressing the numeric buttons and press the CAM(SET) button.

2. Auto Focus can be set by pressing the “B” or “Top” button. * Manual focus adjustment is also possible by pressing the Focus Far or Focus Near buttons.

Other FunctionsOther FunctionsMulti Screen Display11

Electronic Zoom22

1. It is possible to display images in multi-screen format by pressing the MULTI SCREEN buttons. (4, 7, 9, 10, 13 and 16 screen for HD316, 4, 7 and 9 for HD309) * If single screen needs to be displayed, enter desired camera number by numeric keys and press CAM(SET) button.

2. Pressing EL-ZOOM button displays 2 times or 4 times zooming image.

* Displayed image position can be changed during electronic zoom by operating the joystick.

Note: The picture quality of the enlarged image by electronic

zoom will be lower than the standard image quality.

Project Big Bang, SSD GSG Version 1.0

MULTI SCREEN

1. Select desired camera and monitor to operate.

JoystickEL-ZOOM

Message in LCD DisplayMessage in LCD Display

InvalidWhen entering a wrong User ID or PasswordWhen entering invalid numbers

Note: “Invalid” will disappear after a few seconds.

ProhibitedWhen operating functions restricted by user management settings.

Unit ErrorWhen selected unit is not connected properly

Note: Make sure all connection on the rear panel of

WJ-HD300 series.

Controller No.1 No Exist Error

When Unit Address 1 is not created

Set Rotary Switch to position 1 and create Unit Address 1

Note: “Prohibited” will disappear after a few seconds.