IP ADDRESS: . . . MAC ADDRESS: - - - - - Quick Networking Guide Find Your IP and MAC Address Local Connection (PC) Record your information below: Press the INFO button on the remote control. OR Right-click and click Information. This guide will show you how to set up your new Lorex system for connection over the Internet using a PC, Smartphone, or Tablet. 1 2 3 Double-click your NVR in the list and click Yes. b d Double-click on the Lorex netHD Client icon on your desktop. When the client opens, click Enter Wizard. e Enter a name for your NVR of your choice under Nickname (e.g. Home NVR). If you have changed the User Name or Password, you must enter your new User Name or Password. Click Add. Manual Port Forwarding Manually forward ports 80, 8000 and 1025 to your NVR’s IP address. All routers are different. To port forward your router, please refer to your router’s user manual. An example of a port forwarding screen is shown for illustration purposes. OR EXAMPLE 80 80 HTTP 12 8000 12 Client 8000 1025 12 Mobile 1025 Before You Start: Make sure you have: • A router and high-speed Internet access (not included). • Connected your NVR to your router using an Ethernet cable. (See the Quick Connection Guide for details). • A PC connected to the same router as your NVR. For Mac users, please visit www.lorextechnology.com for instructions. Install Lorex Client Software for PC from the CD or from www.lorextechnology.com. a i Port Forwarding Easy Connect Wizard (PC Only) 80 NVR IP 8000 1025 You must have the following before using the software: 1. Your router’s model and version numbers 2. Your router’s user name and password 3. Your Lorex device’s IP address (recorded in Step 1) a Install the Lorex Easy Connect Wizard software from the CD or from www.lorextechnology.com and double-click the Desktop icon to open. b The Easy Connect Wizard automatically detects routers on your network. Click the Next button. NOTE: If more than one router is detected, additional setup steps may be required. See the Easy Connect Manual on CD for details. c Under the Router drop-down list, select the model of your router OR click the Search button to enter the name of your router model. Linksys or Netgear Routers: Click Try to Auto Detect (works with most models). d Under Router IP, click the Detect Router IP button. The router’s IP address is filled in. e Under Username and Password, enter the router’s username and password. f Under IP, enter the IP address of your Lorex device recorded in step 1. g Under Port , enter the system port number(s). By default: 80, 8000, and 1025. h Click Next to continue. 60 Minutes netHD LNR200 Series Quick Network Guide - English - R1 Congratulations! You can now view & playback video on your system via LAN. Continue the setup to enable Internet remote access. Click Update Router. The program updates the router settings. This may take around 30 seconds. You may need to manually save the router settings after the program makes the required changes. Close the update window once the update is finished. Network Video Surveillance Recorder netHD LNR200 Series Click Show Online Devices. The client software will scan for NVR’s on your network. c 192.168.5.109 Home NVR f Click Next 3 times, then click Finished to complete the Wizard. The Client Software opens to Main View and streams live video from your cameras.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
IP ADDRESS: . . . MAC ADDRESS: - - - - -
Quick Networking Guide
Find Your IP and MAC Address
Local Connection (PC)
Record your information below:
Press the INFO button on the remote control.OR
Right-click and click Information.
This guide will show you how to set up your new Lorex system for connection over the Internet using a PC, Smartphone, or Tablet.
1
2
3
Double-click your NVR in the list and click Yes.
b
d
Double-click on the Lorex netHD Client icon on your desktop. When the client opens, click Enter Wizard.
e Enter a name for your NVR of your choice under Nickname (e.g. Home NVR). If you have changed the User Name or Password, you must enter your new User Name or Password.
Click Add.
Manual Port ForwardingManually forward ports 80, 8000 and 1025 to your NVR’s IP address.All routers are different. To port forward your router, please refer to your router’s user manual.
An example of a port forwarding screen is shown for illustration purposes.
OR
EXAMPLE
80 80HTTP 12
8000 12Client 8000
1025 12Mobile 1025
Before You Start:Make sure you have:• A router and high-speed Internet access (not included).• Connected your NVR to your router using an Ethernet cable. (See the Quick
Connection Guide for details). • A PC connected to the same router as your NVR. For Mac users, please visit www.lorextechnology.com for instructions.
Install Lorex Client Software for PC from the CD or from www.lorextechnology.com.a
i
Port Forwarding Easy Connect Wizard (PC Only)
80NVR IP
8000
1025
You must have the following before using the software:1. Your router’s model and version numbers2. Your router’s user name and password3. Your Lorex device’s IP address (recorded in Step 1)
a Install the Lorex Easy Connect Wizard software from the CD or from www.lorextechnology.com and double-click the Desktop icon to open.
b The Easy Connect Wizard automatically detects routers on your network. Click the Next button.NOTE: If more than one router is detected, additional setup steps may be required. See the Easy Connect Manual on CD for details.
c Under the Router drop-down list, select the model of your router OR click the Search button to enter the name of your router model.
Linksys or Netgear Routers: Click Try to Auto Detect (works with most models).
d Under Router IP, click the Detect Router IP button. The router’s IP address is filled in.
e Under Username and Password, enter the router’s username and password.
f Under IP, enter the IP address of your Lorex device recorded in step 1.
g Under Port, enter the system port number(s). By default: 80, 8000, and 1025.
h Click Next to continue.
60 Minutes
netHD LNR200 Series Quick Network Guide - English - R1
Congratulations! You can now view & playback video on your system via LAN. Continue the setup to enable Internet remote access.
Click Update Router. The program updates the router settings. This may take around 30 seconds.
You may need to manually save the router settings after the program makes the required changes.
Close the update window once the update is finished.
Network Video Surveillance RecordernetHD LNR200 Series
Click Show Online Devices. The client software will scan for NVR’s on your network.
c
192.168.5.109Home NVR
f Click Next 3 times, then click Finished to complete the Wizard. The Client Software opens to Main View and streams live video from your cameras.
Register for Lorex DDNS Connect Over the Internet (PC)
iPhone Android
Enable DDNS on your NVR
Quick ReferenceMobile Connection
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology Inc. and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2013 LOREX. All rights reserved.
www.lorextechnology.com
It’s all on the Web
1-22022013
4 65
7
a
User Name Passwordadmin 000000
Default login:
b Configure the following:
Check Enable DDNS.
DDNS Type: Select LorexDDNS.
Device Domain Name: Enter the Domain Name/URL Request you received in the confirmation email after you set up your DDNS account.
User Name: Enter the DDNS User Name from the confirmation email.
Password: Enter the DDNS Device Password from the confirmation email.
c
c Click Warranties and click Activate Warranty. Fill in the registration form and click Save Warranty. Check the sticker under your NVR for the Product Model Number and Serial Number.
a Open your web browser and go to: http://www.lorexddns.net
Please allow 10~15 minutes for the DDNS servers to update with your new DDNS address before proceeding to Step 6.
Congratulations! You can now connect over the Internet to view and playback video. See Step 7 to connect to your NVR on your mobile phone or tablet.
Domain Name/URL Request: DDNS User Name: DDNS Device Password:
Need Help?See the complete Instruction Manual on the CD.
ORVisit www.lorextechnology.com/support
dClick Set Up a New DDNS
Record your information here:
An automated REGISTRATION CONFIRMATION E-MAIL will be sent to your email. Printand save this confirmation. You will need to enter it into your system to enable remote access.f
e Fill out the My DDNS form:Product Warranty: Select the product warranty you created in the previous steps.
Device Name: Enter a name for your device of your choice.MAC Address: Enter the MAC address of your Lorex system recorded in Step 1.
URL Request: Enter the web site address that will be used to connect to your Lorex system (e.g. tomsmith).Click Save to register your product for DDNS.
d Configure the following:
Nickname: Enter a name for your NVR of your choice (e.g. Home NVR).
IP/DDNS: Enter the Domain Name/URL Request from the confirmation email, followed by .lorexddns.net. For example, if your Domain Name/URL Request is tomsmith, enter tomsmith.lorexddns.net.
Click Add.
Install and run the Client Software for PC on a remote computer. See Step 2 for details.
ab Click Step 1 and create a new My Lorex account or sign in with
an existing account.
b The Add NVR Wizard opens. Click Enter Wizard.
NOTE: You must complete ALL previous steps before connecting using a mobile device.
Download the free Lorex netHD app from the App Store.aTouch the Lorex netHD icon.bTouch then to open the Device List menu.
c
Touch .dEnter the following:e
f
a Download the free Lorex netHD app from the Google Play Store.
b Touch the Lorex netHD icon.
c Touch Devices.
Touch (or ) then touch Add.dConfigure the following:e
g
Default system ports:• HTTP Port: 80• Client Port: 8000• Mobile Port: 1025
netHD LNR200 Series Quick Network Guide - English - R1
Network Video Surveillance RecordernetHD LNR200 SeriesQuick Networking Guide
60 Minutes
NOTE: If you have changed the Client Port, User Name, or Password from the defaults, you must update them to connect to the NVR.
e Click Next 3 times, then click Finished. The NVR opens in Main View and streams video from your cameras.
Right-click and then click Menu Configuration Network DDNS.
Check Enable DDNS
Select DDNS Type
Enter Domain Name/URL Request
Enter DDNS User Name
Enter DDNS Device Password
Click Apply to save changes. Right-click repeatedly to return to live view.
Use this login information for local system access, remote connection, and mobile connection.
All ports must be port forwarded to enable access to the system over the Internet. See Step 3 for details.
iPad Android Tablet
Congratulations! You can now view video from your cameras on your smartphone or tablet.
Alias: Enter a name for your NVR (e.g. Home NVR)IP/DDNS: Enter the Domain Name / URL Request you received via email after registering for DDNS, followed by .lorexddns.net. (e.g. tomsmith.lorexddns.net.)
Touch .
g Touch Start live view. The app opens the Live View screens and shows video from your cameras.
Download the free Lorex netHD Plus app from the App Store.aTouch the Lorex netHD Plus icon.bTouch then touch .c
d Enter the following:
ef
Alias: Enter a name for your NVR (e.g. Home NVR).
IP/DDNS: Enter the Domain Name / URL Request you received via email after registering for DDNS, followed by .lorexddns.net. (e.g. tomsmith.lorexddns.net.)
g
Tap Save.
Tap to enter Live View.
Drag the NVR or camera to the viewing area to open all connected cameras, or drag cameras to the viewing area to view them individually.
Device Name: Enter a name for your NVR (e.g. Home NVR).
Register Mode: Select Domain.
Address: Enter the Domain Name/URL Request you received via email after registering for DDNS, followed by .lorexddns.net. (e.g. tomsmith.lorexddns.net.)
Channel No.: Enter the number of channels.
Touch (or ) then touch Save.fTouch , then Live, then +.
h Select the NVR from the list, then select the camera you would like to view.
Download the free Lorex netHD Plus app from the Google Play Store.aTouch the Lorex netHD Plus icon.bTouch then touch Add.c
d Enter the following:
ef
Alias: Enter a name for your NVR (e.g. Home NVR).
IP/DDNS: Enter the Domain Name / URL Request you received via email after registering for DDNS, followed by .lorexddns.net. (e.g. tomsmith.lorexddns.net.)
g
Tap Save.
Tap to enter Live View.
Drag the NVR or camera to the viewing area to open all connected cameras, or drag cameras to the viewing area to view them individually.
NOTE: To open the Add NVR Wizard manually, click Help Open Wizard.
NOTE: To change keyboard type, click on the right-side of the screen.
c Click Add.
NOTE: If you have changed the Client Port, User Name, or Password from the defaults, you must update them to connect to the NVR.
NOTE: If you have changed the Client Port, User Name, or Password from the defaults, you must update them to connect to the NVR.
NOTE: If you have changed the Client Port, User Name, or Password from the defaults, you must update them to connect to the NVR.
NOTE: If you have changed the Client Port, User Name, or Password from the defaults, you must update them to connect to the NVR.
Related Documents
