QUICK INSTALLATION GUIDE SATV22HD-PRO ENGLISH With this Quick Installation Guide you can watch Satellite TV within 1 minute. Follow below steps and enjoy the most clear and sharp TV images !! After you have switched ON the TV, it will start up in the LANGUAGE Menu. 2. Select the required language and use the OK button. 3. You are now in the Satellite Auto Tuning Setting menu. Select with the ▲/▼ buttons FASTSCAN, JOYNE SCAN or one of the PRE- SET channel downloads and use the OK button to confirm. 4. FastScan menu > Select one of the required provider with the ◄ / ► buttons and the correct Satellite with the ▲ / ▼ and ◄ / ► buttons. Check if you have enough signal and use the ▲ / ▼ buttons to go to SEARCH and use the OK button to confirm. 5. Joyne Scan menu > Here you can download the JOYNE channels on Eutelsat 9° East satellite. Select Joyne Scan and use the OK button to confirm. 6. After confirming SEARCH a pop-up will occur on screen with the question: “ Do you want to start Satellite Autoscan? “. Use the ◄ button to go to YES and confirm with the OK button. 7. The selected TV and Radio channel scan (M7 Group, Joyne, one of the pre-set channel scan) will be loaded. 8. After the channel scan is finalized, the TV will start up on one of the TV channels. WE WISH YOU A LOT OF VIEWING AND LISTENING PLEASURE! 1. Your SATENNE LED TV DEFAULT start is in SATELLITE MODUS. Powered by Satenne / The Netherlands