Quanti-Tray/Legiolert · 2018-03-06 · Validated for use with IDEXX products only. Failure to use only IDEXX authorized products with this product will void any IDEXX warranty. IDEXX
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Validated for use with IDEXX products only. Failure to use only IDEXX authorized products with this product will void any IDEXX warranty. IDEXX does not support any claims made by other manufacturers regarding product compatibility, performance or outcome.
*Quanti-Tray and Legiolert are trademarks or registered trademarks of IDEXX Laboratories, Inc. or its affiliates in the United States and/or other countries.
†Download the IDEXX MPN generator software for automated Quanti-Tray results at idexx.com/mpngenerator.
* Quanti-Tray and Legiolert are trademarks or registered trademarks of IDEXX Laboratories, Inc. or its affiliates in the United States and/or other countries.
IntroductionIDEXX Quanti-Tray/Legiolert is designed to give quantitated bacterial counts of 100 mL samples using IDEXX Legiolert reagent only. Add the Legiolert reagent/sample mixture to a Quanti-Tray, seal it in a Quanti-Tray Sealer PLUS and incubate per the reagent instructions. Count the number of positive wells and use the attached Legiolert Most Probable Number (MPN) Table, or the IDEXX Automated MPN Generator Program found at idexx.com/water, to determine the MPN.
ContentsThis package contains sterile 96-well Quanti-Tray/Legiolert trays. Store at 4-30°C away from light and humidity.
User Instructions1. Use one hand to hold a Quanti-Tray/
Legiolert upright with the well side facing the palm.
2. Squeeze the upper part of the Quanti-Tray/Legiolert so that the Quanti-Tray bends toward the palm.
3. Open the Quanti-Tray/Legiolert by pulling the back away from the well side. Avoid touching the inside of the tray.
4. Pour the reagent/sample mixture directly into the Quanti-Tray/Legiolert, avoiding contact with the inside of the tray.
5. Place the sample-filled Quanti-Tray/Legiolert onto the rubber insert of the Quanti-Tray Sealer PLUS with the well side (plastic) of the Quanti-Tray facing down to fit into the insert.
6. Seal according to the Quanti-Tray Sealer PLUS instructions.
7. Large wells will not completely fill.
8. Incubate according to reagent instructions.
9. Count positive wells and refer to the Legiolert MPN table on the back of this instruction sheet, or the IDEXX Automated MPN Generator Program found at idexx.com/water to find the MPN.†
10. Dispose of media in accordance with good laboratory practices.
†Téléchargez le logiciel IDEXX MPN generator pour l’obtention de résultats automatiques Quanti-Tray à l’adresse idexx.com/mpngenerator.
*Quanti-Tray et Legiolert sont des marques ou des marques déposées de la société IDEXX Laboratories, Inc. ou de ses sociétés affiliées aux États-Unis et/ou dans d’autres pays.
Pour une assistance technique, veuillez contacter:
Europe: +00800 4339 9111
idexx.fr/eau
IntroductionIDEXX Quanti-Tray/Legiolert est conçu pour effectuer des numérations bactériennes dans des échantillons de 100 ml à l’aide du réactif Legiolert IDEXX uniquement. Ajoutez le mélange réactif Legiolert/échantillon dans un Quanti-Tray, fermez hermétiquement avec la scelleuse Quanti-Tray Sealer PLUS puis incubez conformément au mode d’emploi du réactif. Comptez le nombre de puits positifs et utilisez la table des Nombres les plus probables (NPP) Legiolert ci-jointe, ou le programme automatisé IDEXX Automated MPN Generator Program trouvé à l’adresse idexx.com/water, pour déterminer le NPP.
ContetuCe kit contient des Quanti-Tray stériles de 96 puits Quanti-Tray/Legiolert. Conservez entre 4-30°C, à l’abri de la lumière et de l’humidité.
Instructions d’utilisation1. Avec une seule main, prenez un
Quanti-Tray/Legiolert et tenez-le à la verticale en orientant les puits vers la paume de la main.
2. Appuyez sur la partie supérieure du Quanti-Tray/Legiolert afin qu’il vienne se loger dans la paume de la main.
3. Ouvrez le Quanti-Tray/Legiolert en écartant la languette des puits. Évitez tout contact avec la partie intérieure du plateau.
4. Versez directement le mélange réactif/échantillon dans le Quanti-Tray/Legiolert, en évitant tout contact avec l’intérieur du plateau.
5. Placez le Quanti-Tray/Legiolert rempli d’échantillons sur le porte-plateau en caoutchouc de la scelleuse Quanti-Tray Sealer PLUS en veillant à orienter les puits (parties en plastique) du Quanti-Tray vers le bas afin qu’elles viennent s’encastrer parfaitement dans le support à Quanti-Tray.
6. Fermez hermétiquement le Quanti-Tray conformément au mode d’emploi de la scelleuse Quanti-Tray Sealer PLUS.
7. Les grands puits ne seront pas complètement remplis.
8. Incubez conformément au mode d’emploi du réactif.
9. Comptez le nombre de puits positifs, et référez-vous à la table NPP au verso de cette fiche d’instructions, ou utilisez le programme automatisé IDEXX Automated MPN Generator Program trouvé à l’adresse idexx.com/water pour déterminer le NPP.†
10. Éliminez les réactifs conformément aux Bonnes pratiques de laboratoire.
†Scaricare l’applicativo IDEXX MPN generator, per ottenere i risultati Quanti-Tray automaticamente, da idexx.com/mpngenerator.
*Quanti-Tray e Legiolert sono marchi commerciali o marchi registrati di IDEXX Laboratories, Inc. o delle sue affiliate negli Stati Uniti e/o in altri Paesi.
Per l’assistenza tecnica, chiamare i seguenti numeri:
Europe: +00800 4339 9111
idexx.it/acqua
IntroduzioneIDEXX Quanti-Tray/Legiolert è stato formulato per calcolare cariche batteriche in campioni da 100 ml usando solo reagenti IDEXX Legiolert. Aggiungere in un Quanti-Tray il campione in cui precedentemente e’ stato aggiunto il reagente Legiolert , sigillare con un Quanti-Tray Sealer PLUS e incubare secondo le istruzioni accluse al reagente. Contare il numero di pozzetti positivi e usare l’acclusa tabella “Numero Più Probabile” (MPN), o il programma IDEXX Automated MPN Generator, reperibile in idexx.com/water, per determinare l’MPN.
ContenutoQuesta confezione contiene vassoi Quanti-Tray/Legiolert sterili, da 96 pozzetti. Conservare a 4 – 30 °C lontano da luce diretta e umidità.
Istruzioni per l’uso1. Tenere il Quanti-Tray/Legiolert in
posizione verticale con una mano, con la faccia dei pozzetti rivolta verso il palmo.
2. Comprimere la parte superiore del Quanti-Tray/Legiolert in modo da piegare il vassoio verso il palmo.
3. Aprire il Quanti-Tray/Legiolert tirando via il retro del vassoio dalla parte del vassoio con i pozzetti. Evitare di toccare l’interno del vassoio.
4. Versare la miscela di reagente/campione direttamente nel Quanti-Tray/Legiolert, evitando ogni contatto con l’interno del vassoio.
5. Posizionare il Quanti-Tray/Legiolert appena riempito con il campione, sull’inserto in gomma del Quanti-Tray Sealer PLUS con la parte dei pozzetti (plastica) del Quanti-Tray rivolta verso il basso in modo da adattarsi all’inserto.
6. Sigillare seguendo le istruzioni del Quanti-Tray Sealer PLUS.
7. I pozzetti di grandi dimensioni non verranno riempiti completamente.
8. Incubare seguendo le istruzioni sul reagente.
9. Contare i pozzetti positivi e calcolare l’MPN facendo riferimento alla tabella MPN Legiolert sul retro del foglio di istruzioni, o usando il programma IDEXX Automated MPN Generator reperibile a idexx.com/water.†
10. Smaltire i terreni secondo le Buone Prassi di Laboratorio.
Tabella MPN per Quanti-Tray*/Legiolert* a 96 pozzetti
†Faça o download do software gerador de MPN IDEXX para resultados automáticos do Quanti-Tray no idexx.com/mpngenerator.
*Quanti-Tray e Legiolert são marcas registradas ou marcas comerciais da IDEXX Laboratories, Inc. ou suas afiliadas nos Estados Unidos e/ou em outros países.
IntroductionIDEXX Quanti-Tray/Legiolert é projetado para fazer contagens bacterianas quantitativas de amostras de 100 ml usando exclusivamente o reagente IDEXX Legiolert. Adicione a mistura do reagente/amostra Legiolert ao Quanti-Tray, sele-o em uma seladora Quanti-Tray Sealer PLUS e incube de acordo com as instruções do reagente. Conte o número de cavidades positivas e use a Tabela do número mais provável (Most Probable Number, MPN) da Legiolert, ou o Programa gerador de MPN automático do IDEXX que pode ser encontrado no idexx.com/water, para determinar o MPN.
ConteúdoEste pacote contém cartelas estéreis de 96 cavidades Quanti-Tray/Legiolert. Armazene entre 4-30°C, longe da luz e da umidade.
Instruções para o usuário1. Use uma das mãos para segurar o
Quanti-Tray/Legiolert para cima com o lado onde estão as cavidades voltado para a palma da mão.
2. Aperte a parte superior do Quanti-Tray/Legiolert para que o Quanti-Tray se incline em direção à palma da mão.
3. Abra o Quanti-Tray/Legiolert puxando a parte de trás em direção oposta ao lado das cavidades. Evite tocar a parte interior da cartela.
4. Pingue a mistura do reagente/amostra diretamente no Quanti-Tray/Legiolert, evitando contato com o interior da cartela.
5. Coloque a amostra preenchida do Quanti-Tray/Legiolert no inserto de borracha da seladora Quanti-Tray Sealer PLUS com o lado das cavidades (plástico) do Quanti-Tray voltado para baixo, para que se encaixe no inserto.
6. Sele de acordo com as instruções da seladora Quanti-Tray Sealer PLUS.
7. As cavidades grandes não serão totalmente preenchidas.
8. Incube de acordo com as instruções do reagente.
9. Para encontrar o MPN, conte as cavidades positivas e consulte a Tabela MPN Legiolert na parte de trás deste folheto de instruções, ou no Programa gerador de MPN automático do IDEXX que encontra-se no idexx.com/water.†
10. Descarte os meios de acordo com as boas práticas de laboratório.
Se precisar de suporte técnico, ligue para:
Europa: +00800 4339 9111Madrid: 91 788 26 32
idexx.com/water
Tabela MPN Quanti -Tray*/Legiolert* de 96 cavidades
† Descargue el programa generador de Número más probable de IDEXX MPN para obtener resultados automáticos de Quanti-Tray en idexx.com/mpngenerator.
*Quanti-Tray y Legiolert son marcas comerciales o marcas comerciales registradas de IDEXX Laboratories, Inc. o sus empresas filiales en Estados Unidos y/o en otros países.
IntroducciónQuanti-Tray/Legiolert de IDEXX está diseñado para proporcionar recuentos bacterianos cuantitativos de muestras de 100 ml utilizando únicamente el reactivo Legiolert de IDEXX. Añada la mezcla del reactivo Legiolert y la muestra a un Quanti-Tray, séllelo en un sellador Quanti-Tray Sealer PLUS e incube de acuerdo con las instrucciones del reactivo. Cuente el número de pocillos positivos y utilice la tabla adjunta de Número más probable (NMP) de Legiolert, o el programa generador automatizado de Número Más Probable IDEXX que puede encontrar en idexx.com/water para determinar el NMP.
Instrucciones para el usuario1. Este envase contiene bandejas de
96 pocillos estériles Quanti-Tray/Legiolert.
2. Presione la parte superior de Quanti-Tray/Legiolert de modo que Quanti-Tray se doble hacia la palma de su mano en forma de embudo.
3. Abra Quanti-Tray/Legiolert tirando de la parte posterior hacia la parte opuesta de la cara de los pocillos. Evite tocar el interior de la bandeja.
4. Vierta la mezcla del reactivo y la muestra directamente en Quanti-Tray/Legiolert, evitando el contacto con la parte interior de la bandeja.
5. Coloque Quanti-Tray/Legiolert con la muestra en el molde de goma de Quanti-Tray Sealer PLUS con el lado de los pocillos (plástico) de Quanti-Tray mirando hacia abajo para encajar en el molde.
6. Séllelo según las instrucciones del sellador Quanti-Tray Sealer PLUS.
7. Los pocillos grandes no se llenarán completamente.
8. Incube de acuerdo con las instrucciones del reactivo.
9. Cuente los pocillos positivos y consulte la tabla de Número más probable de Legiolert en el reverso de esta hoja de instrucciones o del programa generador automatizado de Número Más Probable de IDEXX que encontrará en idexx.com/water para obtener el NMP.†
10. Deseche los medios según las buenas prácticas de laboratorio
Tabla NMP para Quanti-Tray*/Legiolert* de 96 pocillos
† Die IDEXX Software zur MPN-Ermittlung für automatisierte Quanti-Tray-Ergebnisse kann unter idexx.com/mpngenerator heruntergeladen werden.
*Quanti-Tray und Legiolert sind Marken oder eingetragene Marken der IDEXX Laboratories, Inc. oder ihrer Tochterunternehmen in den Vereinigten Staaten und/oder in anderen Ländern.
Technische Unterstützung erhalten Sie unter der Rufnummer:
Europe: +00800 4339 9111
idexx.de/wasser
EinführungIDEXX Quanti-Tray/Legiolert liefert quantifizierte Bakterienzahlen von 100-ml-Proben unter ausschließlicher Verwendung von IDEXX Legiolert-Reagenz. Die Legiolert-Proben/Reagenz-Mischung in ein Quanti-Tray geben, in einem Quanti-Tray Sealer PLUS versiegeln und gemäß den Anweisungen für das Reagenz inkubieren. Die Anzahl der positiven Vertiefungen zählen und die wahrscheinlichste Zahl (most probable number, MPN) mithilfe der beiliegenden Legiolert-MPN-Tabelle oder des IDEXX Programms zur automatischen MPN-Ermittlung auf idexx.com bestimmen.
LieferumfangDiese Packung enthält sterile Quanti-Tray/Legiolert-Trays mit 96 Vertiefungen. Bei 4–30°C und vor Licht und Feuchtigkeit geschützt lagern.
Gebrauchsanweisung1. Ein Quanti-Tray/Legiolert mit einer
Hand aufrecht halten, wobei die Seite mit den Vertiefungen zur Handfläche zeigt.
2. Den oberen Teil des Quanti-Tray/Legiolert so zusammendrücken, dass sich das Quanti-Tray zur Handfläche biegt.
3. Das Quanti-Tray/Legiolert durch Abziehen der Abdeckung von den Vertiefungen öffnen. Das Innere des Trays nicht berühren.
4. Die Probe/Reagenz-Mischung direkt in das Quanti-Tray/Legiolert geben; dabei Kontakt mit dem Inneren des Trays vermeiden.
5. Das mit der Probe gefüllte Quanti-Tray/Legiolert so auf die Gummieinlage des Quanti-Tray Sealer PLUS legen, dass die Seite des Quanti-Trays mit den Vertiefungen (Kunststoffseite) nach unten zeigt und in die Gummimatte passt.
6. Gemäß den Anweisungen für den Quanti-Tray Sealer PLUS versiegeln.
7. Große Vertiefungen werden nicht vollständig gefüllt.
8. Gemäß den Anweisungen für das Reagenz inkubieren.†
9. Die positiven Vertiefungen zählen und die MPN mithilfe der Legiolert-MPN-Tabelle auf der Rückseite dieser Anleitung oder des IDEXX Programms zur automatischen MPN-Ermittlung auf idexx.com bestimmen.†
10. Die Medien sind gemäß der Guten Laborpraxis zu entsorgen.
MPN-Tabelle für Quanti-Tray*/Legiolert* mit 96 Vertiefungen