TOOL-CATALOGUE | 99 IMPACT TOOLS, IMPACT BITS 04 QUALITY TOOLS MADE BY ELORA – EXCELLENT PRODUCT IN LINE WITH TRADITION AND INNOVATION. For a powerful grip – the full range of ELORA bits and impact sockets. The range was enlarged by impact sockets with 1½" drive.
15
Embed
QUALITY TOOLS MADE BY ELORA – EXCELLENT PRODUCT IN LINE ...niteh.com/images/pdf/6.3.9.pdf · quality tools made by elora – excellent product in line with tradition and innovation.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
TOOL-CATALOGUE | 99
IMPACT TOOLS, IMPACT BITS 04
QUALITY TOOLS MADE BY ELORA – EXCELLENT PRODUCT IN LINE WITH TRADITION AND INNOVATION.
For a powerful grip – the full range of ELORA bits and impact sockets. The range was enlarged by impact sockets with 1½" drive.
IMPACT TOOLS, IMPACT BITS
100 | IMPACT TOOLS, IMPACT BITS
04
1/4”
1/4”
1/4”
1/4”
1/4”
788 Impact Socket
Stock-No.
Tmm
Locking
gRing Pin
788- 4 24 7884-11 7883-11 6 14,0
788- 4,5 24 7884-11 7883-11 6 13,8
788- 5 24 7884-11 7883-11 6 14,2
788- 5,5 24 7884-11 7883-11 6 14,0
788- 6 24 7884-11 7883-11 6 14,0
788- 7 24 7884-11 7883-11 6 15,2
788- 8 24 7884-11 7883-11 6 15,0
788- 9 24 7884-11 7883-11 6 15,0
788- 10 24 7884-11 7883-11 6 17,0
788- 11 24 7884-11 7883-11 6 17,3
788- 12 24 7884-11 7883-11 6 17,6
788- 13 24 7884-11 7883-11 6 17,6
788- 14 25 7884-11 7883-11 6 24,0
Stock-No.
Tmm
Locking
gRing Pin
788A- 1/4 23 7884-11 7883-11 6 15,2
788A- 5/16 23 7884-11 7883-11 6 15,0
788A- 11/32 23 7884-11 7883-11 6 15,0
788A- 3/8 23 7884-11 7883-11 6 17,0
788A- 7/16 23 7884-11 7883-11 6 17,3
788A- 1/2 23 7884-11 7883-11 6 17,6
Rings and pins are not included in prices of sockets.
Application for locking Impact sockets and Impact socket parts on air or electric power toolsType oil resistant rubber
Application for locking Impact sockets and Impact socket parts on air or electric power toolsType special steel
IMPACT TOOLS, IMPACT BITS
110 | IMPACT TOOLS, IMPACT BITS
04
Stock-No.
Tmm
g
4130- PZ 0 50 12 7,6
4130- PZ 1 50 12 8,8
4130- PZ 2 50 12 10,8
4130- PZ 3 50 12 12,4
4130- PZ 4 50 12 18,0
Stock-No.
Tmm
g
4160- TX 10 2,74 70 6 10,4
4160- TX 15 3,27 70 6 10,4
4160- TX 20 3,86 70 6 11,6
4160- TX 25 4,43 70 6 14,8
4160- TX 27 4,99 70 6 13,2
4160- TX 30 5,52 70 6 15,2
4160- TX 40 6,65 70 6 17,6
Stock-No.
Tmm
g
3000- IS 0,5× 3 39 12 5,0
3000- IS 0,5× 4 39 12 5,3
3000- IS 0,6× 3,5 39 12 5,5
3000- IS 0,6× 4 39 12 6,0
3000- IS 0,6× 4,5 39 12 7,0
3000- IS 0,8× 4 39 12 7,0
3000- IS 0,8× 5,5 39 12 7,0
3000- IS 1,0× 5,5 39 12 7,5
3000- IS 1,2× 6,5 39 12 8,7
3000- IS 1,2× 8 39 12 11,6
3000- IS 1,6× 8 39 12 11,6
3000- IS 1,6×10 39 12 15,6
Stock-No.
Tmm
g
4150- 50 1/4” with spring
clip
1/4” 50 6 26
4150- 100 1/4”with magnet
1/4” 100 6 39
4100 Screwdriver Insert Bit
Stock-No.
Tmm
g
4100- IS 0,5×3 50 12 7,6
4100- IS 0,5×4 50 12 8,0
4100- IS 0,8×4 50 12 9,0
4100- IS 0,8×5 50 12 9,6
4100- IS 0,8×5,5 50 12 10,0
4100- IS 1,0×5,5 50 12 10,5
4100- IS 1,2×6,5 50 12 13,0
4100- IS 1,2×8 50 12 14,0
4100- IS 1,6×8 50 12 15,0
4100- IS 1,6×9 50 12 16,0
4100- IS 1,6×11 50 12 20,0
4100- IS 2,0×12 50 12 22,0
4110 Screwdriver Insert Bit
Stock-No.
Tmm
g
4110- IN 3 50 12 8,4
4110- IN 4 50 12 10,8
4110- IN 5 50 12 11,2
4110- IN 6 50 12 12,8
4110- IN 7 50 12 15,2
4110- IN 8 50 12 16,5
4110- IN 10 50 12 22,4
4120 Screwdriver Insert Bit
Stock-No.
Tmm
g
4120- PH 0 50 12 7,6
4120- PH 1 50 12 8,8
4120- PH 2 50 12 10,0
4120- PH 3 50 12 12,0
4120- PH 4 50 12 17,6
4130 Screwdriver Insert Bit
4160 Screwdriver Insert Bit
Screwdriver Insert Bits and Bit Couplers
with hexagon drive 1/4”, for use with air or electric power tools
Drive according to DIN 3126 Form E 6.3
Material: high grade tool steel, steelgrey
4140 Bit Coupler
Stock-No.
Tmm
g
4140- 50 1/4” 1/4” 50 6 15,6
4140- 100 1/4” 1/4” 100 6 38,0
4150 Bit Coupler
3000 Screwdriver Insert Bit
Screwdriver Insert Bits and Bit Couplerswith 1/4” hexagon drive ,
for use with air or electric power tools and manual drive
Drive according to DIN 3126 Form C 6.3/ISO 1173
Material: high grade tool steel, steelgrey
3010 Screwdriver Insert Bit
Stock-No.
Tmm
g
3010- IN 2 25 12 4,53010- IN 2,5 25 12 4,53010- IN 3 25 12 5,03010- IN 4 25 12 5,03010- IN 5 25 12 5,43010- IN 6 25 12 6,03010- IN 8 25 12 10,53010- IN 10 25 12 11,2
Application for plain slot screwsStandard according to DIN 3127/ISO 2351
Application for inside TORX screws
Application for cross slot screws Supa-Pozidriv
Application for use of 1/4” Impact sockets on air or electric power tools with 6,3 mm hexagon drive according to DIN 3126, form E 6.3
Standard according to DIN 7428
Application for hexagon socket head cap screwsStandard according to DIN 7426/ISO 3109
Application for plain slot screwsStandard according to DIN 3127
Application for hexagon socket head cap screwsStandard according to DIN 7426
Application for cross slot screws Phillips-RecessStandard according to DIN 3128
Application for use of 1/4” bits on air or electric power tools with 6,3 mm hexagon drive according to DIN 3126, form E 6.3
Standard according to DIN 7427
IMPACT TOOLS, IMPACT BITS
IMPACT TOOLS, IMPACT BITS | 111
04
3020 Screwdriver Insert Bit
Stock-No.
Tmm
g
3020- PH 1×25 25 12 4,8
3020- PH 2×25 25 12 5,2
3020- PH 2×32 32 12 6,9
3020- PH 2×50 50 12 11,6
3020- PH 3×25 25 12 5,2
3020- PH 3×32 32 12 7,2
3020- PH 4×32 32 12 8,2
3021 Screwdriver Insert Bit
Stock-No.
Tmm
g
3021- PZ 0×25 25 12 5,2
3021- PZ 1×25 25 12 5,5
3021- PZ 2×25 25 12 5,6
3021- PZ 2×50 50 12 12,0
3021- PZ 3×25 25 12 5,6
3021- PZ 3×32 32 12 7,4
3021- PZ 4×32 32 12 12,0
3030 Screwdriver Insert Bit
Stock-No.
Tmm
g
3030- XZN M5 25 12 5,2
3030- XZN M6 25 12 5,6
3040 Screwdriver Insert Bit
Stock-No.
Tmm
g
3040- RIB M5 32 12 5,0
3040- RIB M6 32 12 6,8
3040- RIB M8 32 12 10,0
3040- RIB M10 32 12 13,2
3050 Screwdriver Insert Bit
Stock-No.
Tmm
g
3050- TX 6 1,67 26 12 4,2
3050- TX 7 1,99 26 12 4,3
3050- TX 8 2,31 26 12 4,4
3050- TX 9 2,50 26 12 4,4
3050- TX 10 2,74 26 12 4,5
3050- TX 15 3,27 26 12 4,6
3050- TX 20 3,86 26 12 5,0
3050- TX 25 4,43 26 12 5,2
3050- TX 27 4,99 26 12 5,4
3050- TX 30 5,52 26 12 5,6
3050- TX 40 6,65 26 12 6,4
3060 Screwdriver Insert Bit
Stock-No.
Tmm
g
3060- TX 10 2,74 26 12 4,6
3060- TX 15 3,27 26 12 4,8
3060- TX 20 3,86 26 12 5,0
3060- TX 25 4,43 26 12 5,4
3060- TX 27 4,99 26 12 5,6
3060- TX 30 5,52 26 12 6,0
3060- TX 40 6,65 26 12 6,4
3070 Screwdriver Insert Bit
Stock-No.
Tmm
g
3070- TTX 10 2,74 26 12 4,4
3070- TTX 15 3,27 26 12 4,6
3070- TTX 20 3,86 26 12 4,6
3070- TTX 25 4,43 26 12 5,0
3070- TTX 27 4,99 26 12 5,4
3070- TTX 30 5,52 26 12 5,4
3070- TTX 40 6,65 26 12 6,0
3425 Bit Holder
Stock-No.
Tmm
g
3425 1/4 “ 1/4 “ 60 6 21
3080 Dual Use Screwdriver Insert Bit
Stock-No.
Tmm
g
3080- PZ 1 PZ 1 0,6×4,5 60 12 13
3080- PZ 2 PZ 2 0,8×5,5 60 12 14
3080- PZ 3 PZ 3 1,0×7,0 60 12 16
3085 Midget Screwdriver
Stock-No. Tmm
g
3085 75 12 21
Stock-No.
Tmm
g
3080- PH 1 PH 1 0,64,5 60 12 13
3080- PH 2 PH 2 0,8×5,5 60 12 14
3080- PH 3 PH 3 1,0×7,0 60 12 16
Application for cross slot screws Phillips-RecessStandard according to DIN 3128
Application for inside TORX screws
Application for inside TORX screwsType with conical tip
Application for use of 1/4”bits for electric power machines
Type with magnet
Application for use with power machinesPH: for plain slot screws and cross slot screws Phillips-RecessPZ: for plain slot screws and cross slot screws Supa-Pozidriv
Application for inside TORX safety screwsType with hole in tip
Application suitable for your advertising imprint for use with dual use screwdriver insert bit Stock-No. 3080
Type with dual use blade PH2 / IS 0,8 × 5,5 mmMaterial Polyamid holder
Application for B&S-XZN screws
Application for RIBE-CV screws
Application for cross slot screws Supa-Pozidriv
IMPACT TOOLS, IMPACT BITS
112 | IMPACT TOOLS, IMPACT BITS
04
Stock-No.
Tmm
g
3140- RIB 5 35 12 8,9
3140- RIB 6 35 12 9,6
3140- RIB 8 35 12 12,0
3140- RIB 10 35 12 15,6
3140- RIB 12 35 12 20,4
3140- RIB 14 42 12 35,0
3140- RIB 16 45 12 46,0
3450 Bit-Box
Contents Magnetic Bit Holder with 6 bitsType holder and bits with 1/4” hexagon drive, holder with
inside hexagon adaptor for 1/4” bitsStandard Bits according to DIN 3126, form C 6.3
3455/3460 Bit-Box
Contents Magnetic Bit Holder with 27 bitsType holder and bits with 1/4” hexagon drive, holder with
inside hexagon adaptor for 1/4” bitsStandard Bits according to DIN 3126, form C 6.3
Contents Magnetic Bit Holder with 18 BitsType Holder and bits with 1/4” hexagon drive, holder with
inside hexagon adaptor for 1/4” bitsStandard Bits according to DIN 3126, form C 6.3
3100 Screwdriver Insert Bit
Application for plain slot screwsStandard according to DIN 3127, form C 8/ISO 2351
Stock-No.
Tmm
g
3100- IS 0,8× 5,5 41 12 9,6
3100- IS 1,0× 5,5 41 12 10,4
3100- IS 1,2× 6,5 41 12 12,4
3100- IS 1,2× 8 41 12 16,0
3100- IS 1,6× 8 41 12 16,0
3100- IS 1,6×10 41 12 20,0
3100- IS 2,0×12 41 12 24,0
3100- IS 2,5×14 41 12 30,0
Screwdriver Insert Bitswith 5/16”hexagon drive, for use with air or electric power tools and manual drive
Drive according to DIN 3126, Form C 8 / ISO 1173
Material: high grade tool steel, steelgrey
3110 Screwdriver Insert Bit
Application for hexagon socket head cap screwsStandard according to DIN 7426, form C 8/ISO 3109
Stock-No.
Tmm
g
3110- IN 3 30 12 7,6
3110- IN 4 30 12 9,6
3110- IN 5 30 12 8,9
3110- IN 6 30 12 10,4
3110- IN 8 30 12 12,0
3110- IN 10 30 12 14,4
3120 Screwdriver Insert Bit
Application for cross slot screws Phillips-RecessStandard according to DIN 3128, form C 8
Stock-No.
Tmm
g
3120- PH 1×32 32 12 10,0
3120- PH 2×32 32 12 10,0
3120- PH 3×32 32 12 11,0
3120- PH 4×32 32 12 11,5
3120- PH 4×38 38 12 17,0
3121 Screwdriver Insert Bit
Application for cross slot screws Supa-Pozidriv
Stock-No.
Tmm
g
3121- PZ 1 32 12 10,0
3121- PZ 2 32 12 10,0
3121- PZ 3 32 12 10,4
3121- PZ 4 32 12 13,2
3130 Screwdriver Insert Bit
Application for B&S-XZN screws
Stock-No.
Tmm
g
3130- XZN 5 28 12 8,4
3130- XZN 6 28 12 8,4
3130- XZN 8 28 12 9,6
3130- XZN 10 32 12 15,2
3130- XZN 12 36 12 22,0
3130- XZN 14 38 12 31,0
3140 Screwdriver Insert Bit
Stock-No. Contents
g
3452S 1 Magnetic bit holder 1 1851 piece each Philips bit PH1; PH2; PH31 piece each Pozidriv bit PZ1; PZ2; PZ31 piece each TORX screwdriver bit TX10; TX15; TX20; TX25; TX30; TX401 piece each inside hexagon screwdriver bit 4; 5; 6mm1 piece each plain slot bit 4,5; 5,5; 6mm
Stock-No. Contents
g
3450S 1 Magnetic bit holder1 Phillips bit PH 11 Phillips bit PH 21 Pozidriv bit PZ 11 Pozidriv bit PZ 21 plain slot bit 5,0×0,81 plain slot bit 7,0×1,0
10 93
Application for RIBE-CV screws
IMPACT TOOLS, IMPACT BITS
IMPACT TOOLS, IMPACT BITS | 113
04
3150 Screwdriver Insert Bit
Application for inside TORX screws
Stock-No.
Tmm
g
3150- TX 25 4,43 35 12 10,2
3150- TX 27 4,99 35 12 10,4
3150- TX 30 5,52 35 12 10,8
3150- TX 40 6,65 35 12 11,8
3150- TX 45 7,82 35 12 12,9
3150- TX 50 8,83 35 12 14,4
3150- TX 55 11,22 35 12 20,4
3170 Screwdriver Insert Bit
Application for inside TORX safety screwsType with bore in tip
Stock-No.
Tmm
g
3170- TTX 25 4,43 35 12 10
3170- TTX 27 4,99 35 12 10
3170- TTX 30 5,52 35 12 11
3170- TTX 40 6,65 35 12 12
3170- TTX 45 7,82 35 12 13
3170- TTX 50 8,83 35 12 14
3170- TTX 55 11,22 35 12 20
3090 Ratchet Wrench
Application with female hexagon for screwdriver bits 1/4” and 5/16”
Type with magnet, chrome plated, polishedMaterial special steel
Stock-No. Tmm
g
3090 138 6 105
3090G Cranked Ratchet Wrench
Application with female hexagon for screwdriver bits 1/4” and 5/16”
Type with magnet, cranked, chrome plated, polishedMaterial special steel
Stock-No. Tmm
g
3090G 140 6 105
Bit Holderfor Bits with 1/4” hexagon drive according to DIN 3126 Form C and E
3430 Universal Bit Holder
Application for 1/4” or 5/16” bitsType with joint, bit adaption with spring clip, chrome plated,
polished, with plastic handleMaterial Chrome-Vanadium 31 CrV 3, Code No. 1.2208Standard bit adaption acc. to DIN 3126 form C 6.3 or form C 8
Stock-No.Tmm
g
3430- 1/4” 1/4” 160 6 84
3430- 5/16” 5/16” 180 6 122
3415 Universal Bit Holder
Application for 1/4” bitsType bit adaption with magnet, chrome plated, with plastic