Qualified Partner Program Outlets Felice Guarna, Training Program Manager Wetzikon, Dec. 2005
Qualified Partner Program
Outlets
Felice Guarna, Training Program Manager
Wetzikon, Dec. 2005
Outlets / Page 2Dec. 2005
R&Mfreenet OUTLETS – Large product range to meet different needs
FLAS H M O U N TED W A LL M O U N TED D U C T M O U N TED FLO O R B O XES S PE C IALM U T O A , C P
W O R K A R EAO U TLE TS
Outlets / Page 3Dec. 2005
R&Mfreenet faceplates – complete product range
Standard products Mounting plates Native adapters
Special applications
Local adapters
Outlets / Page 4Dec. 2005
R&Mfreenet faceplates characteristics
Labels with protection
Angled entrance of the cord
Interchangeable adapters
SMART HOLES
FLEXIBILITY
Outlets / Page 5Dec. 2005
Modularity at R&M
Outlets / Page 6Dec. 2005
Selection table for R&M jacks
Copper Cu - ISDN FO
1 Port
2 Port
Cat. 5e Cat. 6 Cat. 3 FO
Copper
Outlets / Page 7Dec. 2005
Faceplates installable features
No tools
Installable
Removable
Smart holes based
Outlets / Page 8Dec. 2005
Faceplate additional featuresthe new global range
Ready for IP54 protection due to special
groove which has been designed on the
box or frame
The WM outlet is mountable with R&M
DIN Rail mounting plate R311599
Outlets / Page 9Dec. 2005
DIN RAIL adapters
FOR MINI SURFACE OUTLET R 925728
FOR FO Outlet (R303458 /R303462 /
R303452/R303454/R303496/R304971) Splash
Outlet WM (R307038/ R307039)
DIN Rail Mounting plate 45x80mm
DIN Rail Mounting Plate 85x86mm
FOR NEW GLOBAL OUTLET R310786
Outlets / Page 10Dec. 2005
Shutter types
Metallic spring Spring-less
Outlets / Page 11Dec. 2005
FO connection options
FO outlets
Easy installation by adapter
Wall and flush mounted versions
Duct mounted
FO adapter can also be used in floor-boxes
Conversion from copper to fiber outlets is possible at all times
Up to two channels (four fibers)
Fiber management hardware advisable
Outlets / Page 12Dec. 2005
FO inserts for Global system
Up to 2 channels (4 fibers) per module holder
ST / ST SC / ST Duplex (Hybrid) SC / SC Duplex
Outlets / Page 13Dec. 2005
R&M outlets system
FM Outlet88x88mm
WM Outlet78x78mm
DM Outlet78x78mm
DM Outletø 62.5mm
503 Outlet
US StyleFaceplate
BS Faceplate
Global assortment
International assortment
Outlets / Page 14Dec. 2005
Adapters for Competitors faceplates
Adapter to install R&Mfreenet connection
module (screened and unscreened) into
Systimax™ faceplates
Adapter number 1
Outlets / Page 15Dec. 2005
Third-Party Suppliers
Tehalit Vimar LK
Bush-Jaeger GmbH bTicino
Peha Gewiss ABB s.r.o
Jung
Berker Cimabox
Gira MM Dataelectric
Merten
Legrand Schweiz Schneider
SAMPLES OF EXISTING FACEPLATES
Outlets / Page 17Dec. 2005
FM outlets (flush mounted) 88x88 mm
Features
For flush or duct installations.
Suitable for use with the "Data Safe
Lock" keying system.
Labeling window with exchangeable
labeling strips.
Angled housing (30°) for optimum
protection (only 1 or 2 ports).
4 port version (flush)
Outlets / Page 18Dec. 2005
WM outlets (wall mounted) 78x78 mm
Features Angled housing (30°) for optimum
protection of line cords. Suitable for use with "Data Safe
Lock" keying system. Labeling window with exchangeable
labeling strips. 1 Port and 2x1 Port versions
available. 2 versions with different mounting
depths available. - 67.5 mm- 52.5 mm
Outlets / Page 19Dec. 2005
DM outlets 80x86 mm
Features
For flush or duct installations.
Suitable for use with the "Data Safe
Lock" keying system.
Labeling window with exchangeable
labeling strips.
Angled housing (30°) for optimum
protection (only 1 or 2 ports).
4 port version (flush)
Outlets / Page 20Dec. 2005
DM outlets 62.5 mm
Features For installation in wall channels. Suitable for use with "Data Safe
Lock" keying system. Labeling window with exchangeable
labeling strips. Angled housing (30°) for optimum
protection of line cords
2x1 Port (angled) 4x1 Port versions (flush).
Outlets / Page 21Dec. 2005
FM and WM outlets MUTO 12 ports
Features For wall and flush mount
installations. Angled housing (30°) for optimum
protection. Suitable for use with the "Data
Safe Lock" keying system. Labeling window with
exchangeable labeling strips. Available only in 12 ports version Application: Open office cabling
Outlets / Page 22Dec. 2005
503 outlets
Features For installations on flush mounting
on walls, metal or plastic ducts and mounting boxes.
Angled housing (30°) for optimum protection of line cords.
Suitable for the use with "Data Safe Lock" keying system.
Labeling windows with exchangeable labeling strips.
Available are 2 ports and 4x1 ports versions.
Outlets / Page 23Dec. 2005
DIN outlets
Features For installation on flush-mount on
metal or plastic ducts, service poles and floor-boxes.
Designed for faceplates and duct covers with cut-outs of 50 x 50mm
Extendable to 80 x 80 mm with frame
Suitable for use with "Data Safe Lock" keying system.
Adhesive labeling strips.
Outlets / Page 24Dec. 2005
Mounting units DK
Features Accommodates two 1xRJ45
connection modules. Suitable for use with "Data Safe
Lock" keying system. Adhesive labeling strips. Designed to fit Third Party
Supplier LK
Outlets / Page 25Dec. 2005
BS faceplate (British standard)
Features For flush and surface mounting. Angled housing for minimum use
of space and for protection of the cord.
Includes labeling strips and labeling window.
UV resistant plastic material. Material according to VO
specifications. Available are 2x1 port and 4x1
port versions.
Outlets / Page 26Dec. 2005
Flap jack Module holder
Flap jack holder
Fitting 6C British cutout
Extremely slim for floor box and flush mount
applications
0Halogen material
Shuttered application without metallic parts
Fit only Rj45 specific part (see catalogue)
Wall plate
Outlets / Page 27Dec. 2005
Mini surface box
Features Accommodates one or two
1xRJ45 connection modules for surface mounting.
Two-part design: - self-locking housing- fixing plate
Cable entry from the rear with knock-out sections and cable entry from below for cable ducts.
Dust protected, exchangeable labeling strips.
Version for Rj11 (included) also available
Outlets / Page 28Dec. 2005
Mounting plate 45x45 mm
Features For mounting in cover frames and
duct covers with 45x45 mm cut-outs.
Snap-In, screw-less installation. RJ45 angled housing (40°) for
optimum protection of patch and line cords.
Suitable for use with the "Data Safe Lock" keying system.
Available are 1 Port and 2 Port versions.
Outlets / Page 29Dec. 2005
Mounting plate 45x45 mm
Features For mounting in cover frames and
duct covers with 45x45 mm cut-outs. Snap-in, screw-less installation. RJ45 angled housing (40°) for
optimum protection of patch and line cords.
Polyamide construction. Integrated shuttered
dust covers. Available are 1 Port and 2 Port
versions.
Outlets / Page 30Dec. 2005
Shuttered fascia, 25x50 mm
Features Designed for cover plates and floor-box
module holders, ducts and surface mounted installations.
Self-closing. Very low mounting profile with lock. Tool-free installation thanks to snap
holder. UL registered (File No. E174388). CSA certified (File No. LR110513).
Outlets / Page 31Dec. 2005
Fascia wallplate accessories
Outlets / Page 32Dec. 2005
6 Port compact box
Features
Flexible (installed in any place such as
duck, wall, table )
Suitable for Copper and/or Fiber media
Size 220 x 110mm (more space)
Bend Radius till 40 mm guaranteed
Outlets / Page 33Dec. 2005
US style faceplate
Features Designed for flush mounting on
walls, ducts, and floor-boxes. Angled housing (30°) for optimum
protection of line cords. Suitable for type 503 floor-boxes. Labeling window with
exchangeable labeling strips. Available are 2 and 6 port
versions.
Outlets / Page 34Dec. 2005
Mounting box for US style faceplate
Features
Matches with US style faceplates for 1, 2, and
6xRJ45 and type 503 outlets.
High-impact VO-rated thermoplastic construction.
UL registered (File No. R174388).
CSA certified (File No. LR110513).
Available in white and ivory.
Outlets Third Party Suppliers samples
Wetzikon, Dec. 2005
Outlets / Page 36Dec. 2005
Italy Vimar srl.
Contact address:
Vimar srl.Via IV Novembre, 32I-36063 Marostica VI
Phone: 0039 0424 488 100Telefax: 0039 0424 488 188Internet: http://www.vimar.it
Outlets / Page 37Dec. 2005
Spain Cimabox
Contact address:
CimaboxPotosi, 32 - 34E-08030 Barcelona
Phone: 0034 93345 33 50Telefax: 0034 93345 36 08Internet: http://www.cimabox.comE-mail: [email protected]
Outlets / Page 38Dec. 2005
Germany Busch - Jaeger Elektro GmbH
Contact address:
Busch-Jaeger Elektro GmbHP.O. BOXD-58505 Lüdenscheid / Germany
Phone: 0049- (0) 2351 / 956-0Fax: 0049- (0) 2351 / 95 66 94Internet: www.busch-jaeger.de
Outlets / Page 39Dec. 2005
Germany Hager Tehalit Vertriebs GmbH
Contact address:
Hager Tehalit Vertriebs GmbH
Zum Gunterstal
D-66440 Blieskastel / Germany
Phone: 0049 / 06842 945-0
Telefax: 0049 / 06842 945-5666
Internet: http://www.tehalit.com
E-mail: [email protected]
Outlets / Page 40Dec. 2005
Germany PEHA
Contact address:
Paul Hochköpper GmbH & Co. KGGartenstrasse 49 D-58511 Lüdenscheid / Germany
Phone: 0049 / 02351 185-0Telefax: 0049 / 02351 276 66
Outlets / Page 41Dec. 2005
Germany GIRA
Contact address:GiraGiersiepen GmbH & Co. KGCorrespondence to:Postfach 12 20D-42461 Radevormwald / Germany
Location:Industrial Area MermbachDahlienstrasseD-42477 Radevormwald / Germany
Phone: 0049 (0) 21 95 602-0Telefax: 0049 (0) 21 95 602-339E-mail: [email protected]: http://www.gira.de
Outlets / Page 42Dec. 2005
Germany Berker
Contact address:
Gebr. Berker GmbH & Co.Klagebach 38D-58579 Schalksmühle / Germany
Phone: 0049 02355 90 50Telefax: 0049 02355 905 - 111E-mail: [email protected]: http://www.berker.de
Outlets / Page 43Dec. 2005
Contact address:
Albrecht Jung GmbH & Co.Volmestrasse 1D-58579 Schalksmühle / Germany
Phone: 0049 / 02355 806-168 Telefax: 0049 / 02355 806-189(Sales Support)E-mail: [email protected]: http://www.jung.de
Germany Albrecht Jung GmbH & Co.
Outlets / Page 44Dec. 2005
ABB s.r.o., Elektro-Praga
Contact Address
ABB s.r.o., Elektro-Praga
Resslova 3
466 02 Jablonec nad Nisou
Czech Republic
tel.: +420 483 364 111
fax: +420 483 312 059
e-mail: [email protected]
web: http://www.abb-epj.cz
Outlets / Page 45Dec. 2005
Merten
Contact Address
Merten
Headquarter Wiehl
Fritz-Kotz-Strasse 8
Industriegebiet Bomig-West
D-51674 Wiehl
Phone: 02261/702-01Inserts for Artec, Trancent, Antik series