QUALIFICATION TEST STUDIO V1.02 2016 October Tool for Master and Recurrent Qualification Test (MQTG/RQTG) for FNTP certification simulators based on Flight Simulation / PREPAR3D http://www.fsinstructor.com Dan Guimbert – [email protected]The qualification test guide is the primary reference document used for the evaluation of a Flight & Navigation Procedures Trainer. It contains test results, statements of compliance and other information to enable the evaluator to asses if the device meets the test criteria described in the JAR STD 3A / 3H manual. Furthermore, the QTG includes both Aircraft and FNPT data used to support the validation. Preparation of recurrent qualification test guide (rQTG) for fixed wing and rotary wing aircraft type FNPT I, FNPT II and FNPT II MCC. Following satisfactory completion of the initial evaluation and qualification tests, a periodic check system must be established to ensure that the FNPT continues to maintain it’s initially qualified performance, functions and other characteristics. The operator shall run the complete QTG between each annual evaluation by the authority. Qualification Test Studio is delivered with an initial Qualification Test Guide and for recurrent QTG tests.
22
Embed
QUALIFICATION TEST STUDIO - FS Instructorfsinstructor.com/download/Qualification_Test_Studio/Qualification... · Lockheed Martin Prepa3D@ V1.x to V3.x ... Support is exclusively done
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
QUALIFICATION TEST STUDIO
V1.02 2016 October
Tool for Master and Recurrent Qualification Test
(MQTG/RQTG) for FNTP certification simulators
based on Flight Simulation / PREPAR3D http://www.fsinstructor.com
QUALIFICATION TEST STUDIO Contents 1 What’s new? ........................................................................................................................................................... 2
2 Install and start ....................................................................................................................................................... 3
2.2 Support ........................................................................................................................................................... 3
2.3 To check if the connection between WideFS and FSUIPC works ..................................................................... 3
2.5 How to update the software ........................................................................................................................... 4
2.6 The license ...................................................................................................................................................... 4
3 Process to record a test PDF/JPG files .................................................................................................................... 6
4 The main window ................................................................................................................................................... 7
4.2 Connection status of the flight simulator ........................................................................................................ 8
5 Create a Test Definition .......................................................................................................................................... 9
5.1 The form ......................................................................................................................................................... 9
5.2 Focus on a test definition file ........................................................................................................................ 10
6 Record a qualification test .................................................................................................................................... 10
6.1 Export to PDF result ...................................................................................................................................... 12
6.1.1 How to personalize the header ............................................................................................................. 14
6.2 Export to JGP files ......................................................................................................................................... 14
7 Export to raw data ................................................................................................................................................ 15
8 Open a recorded test ............................................................................................................................................ 16
9 Focus on offsets .................................................................................................................................................... 17
QUALIFICATION TEST STUDIO 3 Process to record a test PDF/JPG files In a first time, you have to create your test definition. The information can be found in QTG.
You choose graphs to analyze and the initial conditions.
When it’s done, you can record the data and send into PDF/JPG files. These files can be stored or printed.
These results can be add to your FNTP reports
You choose to record this test. you tart FS/Prepar3D
Record on Monday a result (PDF export file) Record on Tuesday another result (JPG export files)
This test definition appears now in your test definition list.
It will later be recorded
Create a test definition based on your mQTG/rQTG
Event to monitor: Engine 1 N1 (%) Event to monitor: Engine 1 ITT (°C) Initial condition: On ground
QUALIFICATION TEST STUDIO 4 The main window The main window is like a menu. You can:
List all qualification test available.
Edit or remove a definition of test
Create a definition of test
Record a test
Open a recorded test pdf file.
After the first start, one demo test definition exists. You can to create one or more (New Definition button).
Move the mouse on the test definition. All details appear.
QUALIFICATION TEST STUDIO 4.1 Interface details
If you remove a test definition, it will not delete the records (PDF file). To remove them too, you have to do it
manually (in the “RESULTS” directory).
4.2 Connection status of the flight simulator You can have 5 different status regarding the flight simulator (FSUIPC) connection:
Message Color Details
NOT CONNECTED Red FS is not UP or WideFS/FSUIPC are not working fine
LOADING OR MENU Orange FS is loading or a window is open (e.g. aircraft/fuel/sceneries window)
PAUSE Orange Pause mode in FS
SLEW Orange Slew mode activated
READY Green FS is ready to fly
List of all qualification
tests (definition)
When you select a report
definition, this part appears
Scroll to see all report
definition
Connection status to the flight simulator
Create a new report
definition
Open a previous result
To change the current report
definition
Delete the current report
definition
Go to record window
QUALIFICATION TEST STUDIO 5 Create a Test Definition
5.1 The form
In this screen, you create or modify a test definition.
A test definition contains:
A title (it has to be unique for each test).
QUALIFICATION TEST STUDIO Up to 8 graphs selected in list boxes
This lists contain the different events monitored from Flight Simulator/Prepar3D. If you need more, send us an
email and we will study your needs.
To remove a selected item, just use the backspace key (blank)
Up to 8 initial conditions. It’s the starting value when you begin a record.
E.g.: if you select “Aircraft True Heading (°)”, then, when you start to record, a line shows “Aircraft true Heading
= 34°” and this value won’t be updated during the test.
A free text to add input in the final report. Return carriages are allowed.
5.2 Focus on a test definition file When you create a definition file, it generates a
XML file stored in a directory named “TEST
DEFINITION”.
You can easily copy these files or move them on
another computer.
The Backup directory stored the REMOVED
report definition.
Beware: you don’t have a backup when you edit an existing report definition.
6 Record a qualification test Connected to FSX/Prepar3D, you can select a test definition and start to record all events. You obtain this kind of
window:
QUALIFICATION TEST STUDIO
The graphs are refreshed every 300 milliseconds.
Initial conditions are updated ONLY when you start the record or click on RESET button.
To save a pdf file, click on “EXPORT TO PDF” button. You can “Export to PDF” several times. Each time, it
saves a different file.
Buttons
Visible only if FS/Prepar3D is
ready
Selected qualification test
Real-time events (graphs
selected in the test definition)
Initial conditions (refresh only
when the record starts or is reset
Free text given in the test definition
QUALIFICATION TEST STUDIO 6.1 Export to PDF result
When you save the pdf:
You obtain a report split on one or several pages (it depends on the number of events to display).
It creates a pdf file stored in a directory called “RESULTS”
Each result PDF file is named “<Report Definition Title>-<Date of the record>_<random ID>.pdf.
You can have several records for a same report definition.
QUALIFICATION TEST STUDIO
QUALIFICATION TEST STUDIO 6.1.1 How to personalize the header
When you have insert a valid license, you can personalize the header.
Edit Header.png file.
You can change this image but don’t change width (1499 pixels)
Note: if you are in demo mode (no license), this file is ignored.
6.2 Export to JGP files
When you use “Export to JPG” it exports all graphs to jpg. They are compress into a zip file.
QUALIFICATION TEST STUDIO These zip files are stored in the same place than PDF files (RESULT directory).
7 Export to raw data
It creates a csv file containing:
- The test title
- The date of the record
- All events recorded
QUALIFICATION TEST STUDIO These csv file are stored in the RESULT directory
8 Open a recorded test If you select a test definition and records exist, a button appears and show the number of previous record
QUALIFICATION TEST STUDIO If you click on this button, it opens a window to choose to open a previous record:
9 Focus on offsets
9.1 Create customized offsets If you need more FSUIPC offsets, such as if you have a specific aircraft, you can create them via main menu > offsets
> Custom offset.
Example: we want to add X Acceleration (information found in FSUIPC documentation):
QUALIFICATION TEST STUDIO It gives:
QUALIFICATION TEST STUDIO
Field Details
Offset Distinct name A unique name (not used by default and other custom offsets)
Hexadecimal address 4 characters from 0000 to FFFF found in FSUIPC or aircraft editor documentation
Size Declare the size of the offset: 1 Byte_Size_1 2 Short_Size_2 4 Integer_Size_4 8 Long_Size_8 or Double_Size_8 (float)
Divide value Convert the FSUIPC value. EG. The FSUIPC values are between -16384 and +16384. If you want result in percent, use “168.84” for divide value. The range becomes -100 to 100
Post-Calcul FSUIPC post-Cacul. Select: - None to have float values - To_INT for integer (5.2 becomes 5) - Rankine_To_Celsius to convert Rankine to T° Celsius - FROM_0_TO_360 to limit a value from 0 to 360 (e.g. heading)
Unit It’s just words to display as legend in the chart
Description For now only use when you export all offset in a text
Mini/Maxi It will be used only in V2 version to limit chart range
Result in the pdf:
Note: if you don’t obtain correct value, please check result with FSInterrogate2std.exe (FSUIPC SDK).
QUALIFICATION TEST STUDIO 9.2 Offset export Obtain the complete offset list. It includes your own custom offset (tag [CUSTOM]).
10 Annexes
10.1 Regular Offsets provided in Qualification Test Studio
CONTROL INPUT Aileron (%) Aileron Axis input value, post calibration, just before being applied to the simulation
QUALIFICATION TEST STUDIO CONTROL INPUT Elevator (%) Elevator Axis input value, post calibration, just before being applied to
the simulation
CONTROL INPUT Rudder (%) Rudder Axis input value, post calibration, just before being applied to the simulation
CONTROL INPUT Throttle 1 Handle (%) Throttle 1 Axis input value, post calibration, just before being applied to the simulation
CONTROL INPUT Throttle 2 Handle (%) Throttle 2 Axis input value, post calibration, just before being applied to the simulation
CONTROL INPUT Throttle Handle (%) Throttle Axis input value, post calibration, just before being applied to the simulation
ENG ROTOR RPM for Helo (%) Engine 1 Rotor RPM % (16384=100%): for true helos
ENG1 ITT (°C) Engine 1 Turbine temperature: degree C (Turbine engine ITT)
ENG1 Mixture (%) Engine 1 Mixture lever, 0 to 100%
ENG1 N1 (%) Turbine Engine 1 N1 value (%) as a double (FLOAT64). This is for jets and turboprops—it has no meaning on reciprocating prop aircraft.
ENG1 N2 (%) Turbine Engine 1 N2 value (%) as a double (FLOAT64). This is for jets and turboprops—it has no meaning on reciprocating prop aircraft.
ENG1 Oil pressure (PSI) Engine 1 Oil pressure. Note that in some aircraft (eg the B777) this can exceed the 16-bit capacity of this location. FSUIPC limits to 220 psi
ENG1 Oil Pressure for Helo (PSI) Engine 1 Transmission oil pressure for helo models
ENG1 Oil temp (°C) Engine 1 Oil temperature
ENG1 Oil Temp for helo to test with FSX Engine 1 Oil temperature for helo models
ENG1 RPM for Helo (%) Engine 1 Jet N2. This also appears to be the Turbine RPM % for proper helo models (and now also for the FS2004 Robinson model and derivatives)
ENG1 TORQUE for helo (%) Engine 1 Torque % for helo models. Do not use for other prop-based models
ENG2 ITT (°C) Engine 2 Turbine temperature: degree C (Turbine engine ITT)
ENG2 Mixture (%) Engine 2 Mixture lever, 0 to 100%
ENG2 N1 (%) Turbine Engine 2 N1 value (%) as a double (FLOAT64). This is for jets and turboprops—it has no meaning on reciprocating prop aircraft.
ENG2 N2 (%) Turbine Engine 2 N2 value (%) as a double (FLOAT64). This is for jets and turboprops—it has no meaning on reciprocating prop aircraft.
ENG2 Oil pressure (PSI) Engine 2 Oil pressure. Note that in some aircraft (eg the B777) this can exceed the 16-bit capacity of this location. FSUIPC limits to 220 psi
ENG2 Oil Pressure for Helo (PSI) Engine 2 Transmission oil pressure for helo models
ENG2 Oil temp (°C) Engine 2 Oil temperature
ENG2 RPM for Helo (%) Engine 2 Jet N2. This also appears to be the Turbine RPM % for proper helo models (and now also for the FS2004 Robinson model and derivatives)
ENG2 TORQUE for helo (%) Engine 2 Torque % for helo models. Do not use for other prop-based models
ENVIRONMENT Abiant Wind Speed (kts) Ambient wind velocity in kts
ENVIRONMENT Air Temperature OAT (°C) Outside Air Temperature (OAT)
ENVIRONMENT Pressure QNH (hPa) Pressure (QNH) as millibars
ENVIRONMENT Runway Condition (Dry|Wet|Icy|Snow)
Surface condition: 0=normal, 1=wet, 2=icy, 3=snow
QUALIFICATION TEST STUDIO 10.2 Copyrights This software uses these components: FSUIPCClient.dll - version 2.4 by Paul Henty From FSUIPC SDK
FSUIPC and WideFS by Peter Dowson (Payware) http://www.schiratti.com/dowson.html
DotNetZip V1.9.8 http://dotnetzip.codeplex.com/
PDFSharp V1.3 http://pdfsharp.com
We are not associated with any aircraft manufacturers. It can NOT be used for the real flight. It is designed exclusively for training simulator sessions.