This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1 of 12 (Rev. 09/2020) QH2L_SS_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
ApprovalsProduct Modifications Please list modification requirements for review by factory:
LED WARRANTY
5YEAR
Quadro H2 LED
Project:
Type: Qty:
Date: Customer:
Date:
Series QH2L Quadro H2 LED
Light Engine 5G350 Nominal 33W
5G530 Nominal 49W
5G700 Nominal 64W
1 DM or HL only. Cannot be combined.2 120V, 240V, 277V only3 Type I, II, III & IV only4 Not available in combination with Motion Sensor
CCT 30 3000K
40 4000K
Optics R1 Type I Distribution
R2 Type II Distribution
R3 Type III Distribution
R4 Type IV Distribution
Mounting 1 Single
2 Double
W Wall Mount
Power Cord Length
Finish WH White
BK Black
BZ Bronze
SP Specify Premium Color
Voltage UNV120-277V
347* 480*
347V 480V
Options HS3 House Side Shield (180°)
QH2L
SV Silver
DM1 Dimming (0-10V)
Order Code:
Add 2’ if double mounting is used
- - - - - - -
Pole Order Code: - - -
Series Height Finish Options
QH2L -
R5R Type V (Round) Distribution
R5S Type V (Square) Distribution
5G105 Nominal 95W
5G140 Nominal 125W
12 15 18 20 25 XX12’ 15’ 18’ 20’ 25’ XX’
* IDA Approved with 3000K CCT*For other CCT, please consult factory.
BL Semi-Matte Black
*Equipped with step down transformer
HL301,2 Hi-Lo Switching Low Output 30%
HL501,2 Hi-Lo Switching Low Output 50%
Motion Sensor w/ Optional Photocell (Meets Title 24 Requirements) See Pole Spec Sheet for Order Code
TLR4 Twist Lock Receptacle7-pin
TLRP4 Twist Lock Receptacle w/Photocell
BUY AMERICAN
Page 2 of 12 (Rev. 09/2020) QH2L_SS_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
1. Luminaire Cover - Formed low-copper aluminum cover hinges open for easy access to LED light engine.
2. Gasketing - Continuous molded gasket pro-vides weatherproofing, dust and insect control at all luminaire connections.
3. Housing - Die-cast and spun low-copper aluminum components with stainless steel fasteners.
4. LED Array - High Flux LEDs mounted to metal core PCB and attached to external heat sink for maximum LED performance and life. CCT tolerance within a 3 step bin and provided with a minimum CRI of 80. LED light engine has a reported lumen maintenance of 98% at 50,000 hours. L70 calculated greater than 100,000 hours. Exposed face rated to IP65.
5. LED Optics - (not shown) Technical Optics (R1, R2, R3, R4, R5S and R5R) use Selux signature light pattern acrylic lens holder to secure propri-etary silicone optics. Internal micro house side shield available for distributions types I, II, III & IV.
6. LED Driver - (not shown) LEDs are driven by RoHS compliant constant current program-mable LED driver. Driver includes 0-10V dimming to 10%, meets the requirements of IP66. Driver assembly located inside head and accessible through the opening fixture cover.
7. Surge Protector - (Not shown) 3-Pole Surge protection device safeguards electrical compo-nents from indirect lighting strikes and surges up to (20kA standard). RoHS compliant.
8. Fixture Frame- (not shown) Four cast alu-minum arms attach to pole fitter with recessed stainless steel Allen head screws
9. Pole Fitter- Cast aluminum fitter secures to pole with two stainless steel Allen head set screws. For 3 1/2” (90mm) O.D. pole.
Exterior Luminaire Finish - Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylaccertified facility and undergo a five stage inten-sive pretreatment process where product isthoroughly cleaned, phosphated and sealed. Selux powder coated products provide excel-lent salt and humidity resistance as well as ultra violet resistance for color retention. All products are tested in accordance with test specifications for coatings from ASTM and PCI.
Standard exterior colors are White (WH), Black (BK), Matte Black (MB), Bronze (BZ) and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.
5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the Quadro H2 LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the fixture, LED driver and LED light engine when installed and operated according to Selux instructions. Fixture suitable for ambient tem-perature of 40° C (104° F). For details and exclu-sions, see “Selux Terms and Condition of Sale.”
Listings and Ratings: Tested to IESNA LM-79-08 and LM-80 test standards at 25° C ambient temperature. Rated for wet location.
Visit selux.us for our LED End of Life recycling policy.
Specifications
Quadro H2 LED
23 3/16” (589mm)
27 3/8” (695mm)
3 1/2” O.D. Pole (90mm)
QH2L
1
9
2
8
3
For Buy American compliance on poles, please consult the factory.
Page 3 of 12 (Rev. 09/2020) QH2L_SS_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
SENSOR ANGULAR ORIENTATION FROM HAND HOLE 0°IN 90° INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,18,27)
DREV.
DWG SIZE
TYPE 27 (270Ā)
TYPE 18 (180Ā)
TYPE 09 (90Ā)
HAND HOLDLOCATION
TYPE 00 (0Ā)
TOP VIEW
SENSOR ANGULAR ORIENTATION FROM HAND HOLE 0ĀIN 90Ā INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,18,27)
POLE DEPICTED IS GENERIC PLEASEREFERENCE CUSTOMER ORDER
FOR SPECIFIC POLE MODEL NUMBERTYPE 18 SHOWN
SCALE: 1:16
ADRAWN BY: FAH
DRW
JLJ
REVISIONSREV. ECN DESCRIPTION DATE BY APPR BY
01 XXXX CREATED FOR MARKETING 09/21/2016 FAH DRW
A 0017.17TO DETAIL MODIFICATION TOPOLES AND COLUMNS FOR
SENSOR MOUNTING ORIENTATIONLOGIC
07/12/2017 FAH DRW
12"305.00
NOMINALPOLE
HEIGHTMINUS 12"
NOMINALPOLE HEIGHT
HAND HOLELOCATIONA
4 X Ă .136 3.45 THRU8-32 UNC THRU
2 X Ă .188 4.76 THRU
2.00050.80
3.00076.20
1.00025.40
.50012.70
3.50088.90
3.25082.55
1.62541.28
1.75044.45
1.00025.40
DETAIL ASCALE 1 : 1
MATERIAL: SEE BOM
PRODUCT SERIES:
R
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND ISPROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED ORREPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THEPURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUXCORPORATION.
DWG. #: 6-48B323-00FINISH: PER SO
EXTERIOR SENSOR POLE MOD REFERENCE
T (845) 691-7723F (845) 691-6749
DATE: 9/21/2016
SHEET:1 OF 2
TOLERANCES UNLESS OTHERWISE NOTED:DECIMAL INCH:
.XX ā .02"
.XXX ā .010"
DECIMAL METRIC:
X.X ā .5X.XX ā .25
FRACTIONS: ā 1/32 [.79mm] ANGULAR: ā 1 1/2 Ā
5 LUMEN LANEP.O. BOX 1060HIGHLAND, NY 12528
CHECKED BY:
APPROVED BY:
ES01
A
General Pole Drawing For Example Only
NominalPole
Height
Motion Sensor Features
The Selux outdoor rated sensor incorporates Passive Infrared (PIR) technology for motion sensing and also includes a built in photocell. Designed to mount directly through a 1/2” KO in a single gang faceplate on pole/column, the SBO utilizes 100% Digital Passive Infrared (PIR) technology that is tuned for walking size while preventing false tripping from the environment.
Series Optics Hand Hole Orientation Program Color Photocell
Feature Voltage
MS
Motion Sensor
1 270° coverage - Single Sensor
00D0 (0V=0%)
WH WhiteY Yes UNV
09 D1 (1V=10%) BK Black N No 347
18 D3 (3V=30%)BZ Bronze
480
27 D5 (5V=50%)
NOTE: Motion sensor comes programmed at 30% dimmed level with a 5 min. delay as default. All programming required after shipping by others.
12”(305mm)
TYPE 27 (270°)
TYPE 18 (180°)
TYPE 09 (90°)
HAND HOLELOCATIONTYPE 00 (0°)
TOP VIEW
SENSOR ANGULAR ORIENTATION FROM HAND HOLE 0°90° INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,18,27)
Sensor angular orientation from hand hole 0°
90° increments clockwise around pole (Type 00,09,18,27)
Page 4 of 12 (Rev. 09/2020) QH2L_SS_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
SENSOR ANGULAR ORIENTATION FROM HAND HOLE 0ĀIN 90Ā INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,18,27)
POLE DEPICTED IS GENERIC PLEASEREFERENCE CUSTOMER ORDER
FOR SPECIFIC POLE MODEL NUMBERTYPE 18 SHOWN
SCALE: 1:16
ADRAWN BY: FAH
DRW
JLJ
REVISIONSREV. ECN DESCRIPTION DATE BY APPR BY
01 XXXX CREATED FOR MARKETING 09/21/2016 FAH DRW
A 0017.17TO DETAIL MODIFICATION TOPOLES AND COLUMNS FOR
SENSOR MOUNTING ORIENTATIONLOGIC
07/12/2017 FAH DRW
12"305.00
NOMINALPOLE
HEIGHTMINUS 12"
NOMINALPOLE HEIGHT
HAND HOLELOCATIONA
4 X Ă .136 3.45 THRU8-32 UNC THRU
2 X Ă .188 4.76 THRU
2.00050.80
3.00076.20
1.00025.40
.50012.70
3.50088.90
3.25082.55
1.62541.28
1.75044.45
1.00025.40
DETAIL ASCALE 1 : 1
MATERIAL: SEE BOM
PRODUCT SERIES:
R
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND ISPROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED ORREPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THEPURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUXCORPORATION.
DWG. #: 6-48B323-00FINISH: PER SO
EXTERIOR SENSOR POLE MOD REFERENCE
T (845) 691-7723F (845) 691-6749
DATE: 9/21/2016
SHEET:1 OF 2
TOLERANCES UNLESS OTHERWISE NOTED:DECIMAL INCH:
.XX ā .02"
.XXX ā .010"
DECIMAL METRIC:
X.X ā .5X.XX ā .25
FRACTIONS: ā 1/32 [.79mm] ANGULAR: ā 1 1/2 Ā
5 LUMEN LANEP.O. BOX 1060HIGHLAND, NY 12528
CHECKED BY:
APPROVED BY:
ES01
A
General Pole Drawing For Example Only
• 100% Digital PIR Detection, excellent RF Immunity
• 270° coverage pattern
• Up to 30ft mounting
• IP66 Rated for outdoor applications
• Built-in 1kV surge protection
• No minimum load requirements
• Made for LED light source
• Interchangeable hot and load wires - impossible to wire backwards
• Adjustable time delays, max/min dim levels and ramp rates
• Programming button accessible without opening sensor or removing gaskets
• No field calibration or sensitivity adjustments required
• Non-volatile setting memory
• Convenient test mode
• Suitable for Title 24 applications
Motion Sensor Wiring Diagram
Motion Sensor Features
LINECORD
BLKWHTBLKVIO
SBO SENSORGRY
GRN
WH
T
BLK
BLK
WH
TG
RN RED
ORG
BLK
WH
TG
RN
ORGRE
D
FIXT
URE
FEED
CO
RD
WEATHERPROOF WIRE CONNECTOR,600V 18-8GA
(SUPPLIED)
ATTACH CORD TO BACK OF SENSOR MOUNTING PLATEWITH 2 ZIP TIES (NOT SUPPLIED)
Page 5 of 12 (Rev. 09/2020) QH2L_SS_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Single (1) Die-cast aluminum fitter base secured to pole with three stainless steel, Allen head set screws.
Double (2) Die-cast aluminum double luminaire mounting arm secured to pole with four stainless steel, Allen head set screws. Outer slip fitter for 31/2” tenon.
Wall (W) Die-cast aluminum double round wall mount arm. Se-cured to wall with 1/4” diameter threaded fasteners (by others).
Ø27 3/8” (695mm)
Pole Height (12’ shown)
Ø3 1/2” (90mm)
74 3/4” (1898mm)
49 1/16” (1246mm)
35 7/8” (910mm)
35 1/8” (891mm)
Wall Arm Mounting Detail (Conduit and mounting hardware by others).
4 15/16” (121mm)
5 15/16” (151mm)
2 9/16” (65mm)
9 1/4” (235mm)
Pole Height (11’ shown)
23 1/32” (585mm)
EPA = 1.23ft2 (0.11m2)
Weight = 39lbs. (18kg)EPA = 2.79ft2 (0.26m2)
Weight = 116lbs. (53kg)
EPA = 1.94ft2 (0.18m2)
Weight = 63lbs. (29kg)
Page 6 of 12 (Rev. 09/2020) QH2L_SS_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Standard Wiring for UNVStandard wiring for 120-277V with no additional options.
FROMFEEDCORD
L1
N
DIM(+)
DIM(-)
BLACK
WHITE
GREEN
RED
ORANGE
SURGEPROTECTOR
0-10V Dimming Option (DM) Wiring for 347/480V100% light output at 10V, down to 1% light output at 0V.
Hi-Lo Switching Option (HL30 or HL50) Wiring120/240/277V. When red is energized, light output will beat "Lo" level.
SURGEPROTECTOR
BLACK
WHITE
GREEN
RED
L1
N
L2
FROMFEEDCORD
RELAY
AUTOTRANSFORMER
Standard Wiring for 347/480VStandard wiring for 347/480V with no additional options.
SURGEPROTECTOR
BLACK
WHITE
GREEN
L1
NFROMFEEDCORD
AUTOTRANSFORMER
0-10V Dimming Option (DM) Wiring for UNV100% light output at 10V, down to 1% light output at 0V.
SURGEPROTECTOR
BLACK
WHITE
GREEN
RED
ORANGE
L1
N
DIM(+)
DIM(-)
FROMFEEDCORD
DRIVER /LIGHT ENGINE
DRIVER /LIGHT ENGINE
DRIVER /LIGHT ENGINE
DRIVER /LIGHT ENGINE
Page 7 of 12 (Rev. 09/2020) QH2L_SS_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
GFCI Receptacle (REC) - 120V 15A GFCI duplex receptacle with weatherproof, self-closing cover; located 36” (915mm) o.c from base of pole, in-line with hand hole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel (120V only).
GFCI Receptacle (REC2) - 120V 15A GFCI duplex receptacle with weatherproof, self-closing, padlockable in-use cover; located 36” (915mm) o.c. from base of pole, in-line with hand hole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel (120V only).
USB & Duplex Receptacle (REC3) (not shown) - 120V 20A duplex receptacle with USB combination ports. (1) type A and (1) type C high power 5A, 5V USB outlets. With weatherproof, self-closing cover; located 36” (915mm) o.c from base of pole, in-line with hand hole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel.
REC3 does not incorporate GFCI (Ground Fault Circuit Interrupter) protection, and shall be powered by a GFCI protected branch circuit (by others).
USB & Duplex Receptacle (REC4) (not shown)- 120V 20A duplex receptacle with USB combination ports. (1) type A and (1) type C high power 5A, 5V USB outlets. With weatherproof, self-closing padlockable in-use cover; located 36” (915mm) o.c from base of pole, in-line with hand hole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel.
REC4 does not incorporate GFCI (Ground Fault Circuit Interrupter) protection, and shall be powered by a GFCI protected branch circuit (by others).
Page 8 of 12 (Rev. 09/2020) QH2L_SS_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Pole InformationRefer to pole specification sheets for construction details, anchor-age information and additional options.
Bolt Circle for A35 & S35 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown
Pole Height (8’ shown)
A35 & S35 Round Straight Aluminum
& Round Straight Steel Poles
S635 Round Stepped Steel Poles
24” (610mm)
24” (610mm)
44” (1118mm)
Shown with standard base covers.
A35/S35 POLE ONLY
Hand Hold Location
7 3/4” (197mm)
07 3/4” (197mm) Bolt Circle
03” (76mm) Conduit Opening
Note: Adequate drainage must be provided in concrete foundation.
Anchor Bolt Detail for A35 & S35
3 1/4” (83mm)
3/4 x 17” Galvanized Anchor Bolts
3/4 -10 Galvanized Heavy Hex Nut
3/4” (19mm) ID Galvanized Lock Washer
3/4” (19mm) ID Galvanized Flat Washers
Concrete footing designed and supplied by others
1/2” (13mm) for leveling
3/4 - 10 Galvanized Heavy Hex Leveling Nut
Bolt Circle for S635Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown.
S635 POLE ONLY
Hand Hold Location
8 1/2” (216mm)
09” (229mm) Bolt Circle
06 3/8” (162mm) Conduit Opening
Note: Adequate drainage must be provided in concrete foundation.
Anchor Bolt Detail for S635
Base Cover
3/4 x 17” Galvanized Anchor Bolts
2 3/4” (70mm)
1/4” (6mm) for leveling
3/4 - 10 Galvanized Heavy Hex Leveling Nut
3/4 -10 Galvanized Heavy Hex Nut
3/4” (19mm) ID Galvanized Lock Washer
3/4” (19mm) ID Galvanized Flat Washers
Concrete footing designed and supplied by others
Page 9 of 12 (Rev. 09/2020) QH2L_SS_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
REC2 GFCI Receptacle with padlockable in-use cover (120V only)
REC3 USB and Duplex Receptacle with weatherproof cover (120V only)
REC4 USB and Duplex Receptacle with weatherproof padlockable in-use cover (120V only)
MS Motion Sensor w/ Optional Photocell
(Meets Title 24 Requirements)
For PCT option, see p. 1
1 Weatherproof cover intended for portable tools or other portable equipment connected to the outlet only when attended. For other require-ments, please consult factory.
Base Cover InformationRefer to pole specification sheets for construction details, anchorage information and additional options.
Straight Poles (A35 & S35) BC5 Standard Base Cover Two-piece cast aluminum
Stepped Steel Pole (S635) BC6 Standard Base Cover One-piece cast aluminum
3 1/2” (89mm)
012 7/16” (316mm)
5 1/4” (134mm)
65/8” (168mm)
0153/4” (400mm)
45/8” (118mm)
* Other pole configurations available, consult factory.
Page 10 of 12 (Rev. 09/2020) QH2L_SS_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Maximum Candela = 3455.4 Located At Horizontal Angle = 45, Vertical Angle = 60# 1 - Vertical Plane Through Horizontal Angles (45 - 225) (Through Max. Cd.)
ISOFOOTCANDLE LINES OF HORIZONTAL ILLUMINANCE
0 1 2 2.25 3 3.75 4 5 6 75
4
32.75
21.75
1
0
1
2
3
House Side Street Side
Distance In Units Of Mounting HeightValues Based On 16 Foot Mounting Height
.1
.2
.5
1
2
R3 Optics / 64W LED / 3000K CCT
Page 12 of 12 (Rev. 09/2020) QH2L_SS_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.