Top Banner
Schweizerische Eidgenossenschaft Confëdëration suisse Confederazione Svizzera Confederaziun svizra 0 Swiss Confederation FederalOffice of Civil Aviation FOCA Maintenance Training and Examination Organisation Approval Cert ificate rOC 5 -/ PursuantttrReguIatiörf(EC) -Na'2018/1 139 of the European Parliament and of the Council and to Commission RwWE(ELI)No -1-321/2Ö14, for the time being in force and subject to the condition specified below, the Federal Office of Civil Aviation of Switzerland hereby certifies: Q.C.M Quality Control Management AG CH-3123 Belp, Eichholzweg 20-24 as a maintenance training organisation in compliance with Section A of Annex IV (Part-147) of Regulation (EU) No 1321/2014, approved to provide training and conduct examinatËonslisted in the approval schedule attached and to issue related certificates of recognitionto students using the above references. CONDITIONS nbBapprevaLiWr Iited to what is specified in the scope of work section of the approved maintenance training organisation exposition as referfa'tD-irbseQjion A of Annex IV (Part-147); and 2. this approval requires compliance Ü1th the p'rpcedures specified in the approved maintenance trainingorganisation exposition; 3. this apprb%Ft&valid whilstthe approved maintenance training organisation remains in compliance with Annex IV (Part-147) of _ 4. subject to compliance with the forë'going conditions, this approval shall remain valid for an unlimited duration unless the d-- Regulation (EU) No 1321/2014;and hpWLaJ_Das previously been surrendered, superseded, suspended or revoked. Date of original issue’ Date of this revision: huhn 03.03.2010 08.03.2021 Revision No: 18 of Safl Andreas Boss, Head of Section Technical Organisations Bern / =====:: d/ za;
2

Q.C.M Quality Control Management AG · 2021. 3. 8. · Q.C.M Quality Control Management AG CH-3123 Belp, Eichholzweg 20-24 as a maintenance training organisation in compliance with

Mar 14, 2021

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Q.C.M Quality Control Management AG · 2021. 3. 8. · Q.C.M Quality Control Management AG CH-3123 Belp, Eichholzweg 20-24 as a maintenance training organisation in compliance with

Schweizerische EidgenossenschaftConfëdëration suisseConfederazione SvizzeraConfederaziun svizra

0Swiss Confederation

Federal Office of Civil Aviation FOCA

Maintenance Training and ExaminationOrganisation Approval Cert ificate

rOC5-/

– PursuantttrReguIatiörf(EC) -Na'2018/1 139 of the European Parliament and of the Council and to CommissionRwWE(ELI)No -1-321/2Ö14, for the time being in force and subject to the condition specified below, theFederal Office of Civil Aviation of Switzerland hereby certifies:

Q.C.M Quality ControlManagement AGCH-3123 Belp, Eichholzweg 20-24

as a maintenance training organisation in compliance with Section A of Annex IV (Part-147) of Regulation (EU) No1321/2014, approved to provide training and conduct examinatËons listed in the approval schedule attached and toissue related certificates of recognition to students using the above references.

CONDITIONSnbBapprevaLiWr Iited to what is specified in the scope of work section of the approved maintenance training organisation

exposition as referfa'tD-irbseQjion A of Annex IV (Part-147); and2. this approval requires compliance Ü1th the p'rpcedures specified in the approved maintenance training organisation exposition;

3. this apprb%Ft&valid whilst the approved maintenance training organisation remains in compliance with Annex IV (Part-147) of

_ 4. subject to compliance with the forë'going conditions, this approval shall remain valid for an unlimited duration unless the

d--

Regulation (EU) No 1321/2014; and

hpWLaJ_Das previously been surrendered, superseded, suspended or revoked.

Date of original issue’Date of this revision:

huhn

03.03.201008.03.2021 Revision No: 18

of SaflAndreas Boss, Head of SectionTechnical Organisations Bern /

=====::d/

za;

Page 2: Q.C.M Quality Control Management AG · 2021. 3. 8. · Q.C.M Quality Control Management AG CH-3123 Belp, Eichholzweg 20-24 as a maintenance training organisation in compliance with

Schweizerische EidgenossenschaftConfëdëration suisseConfederazione SvizzeraConfederaziun svizra

0Swiss Confederation

Federal Office of Civil Aviation FOCA

Maintenance Training and Examination Organisation Approval Schedule

Reference CH.147.0012

-u-h

K\-_

Organisation name: Q.C.M Quality Control Management AG

Date: 08.03.2021

ClassBasic

Licence categoryB1

B2

B1

LimitationTBI.1TB2T1T1

AEROPLANES TURBINEAVIONICSBombardier BD-100-IAI 0 (Honeywell AS907)Bombardier CL-600-2B16 (604 Variant) (GECF34)Cessna 560XLJXLS (PWC PW545)Falcon 900 (Honeywell TFE731 )Falcon 900EX (Honeywell TFE731 )Falcon 900EX EASy (Honeywell TFE731 )Learjet 35/36 (Honeywell TFE731 )Learjet 60 (PWC PW305)Learjet Model 45 (Honeywell TFE731 )Learjet 31 (Honeywell TFE731Learjet 35/36 (Honeywell TFE731 )Learjet 45 (Honeywell TFE731 )Bombardier CL-600-2B16 (604 Variant) (GECF34)Falcon 900EX (Honeywell TFE731 )Learjet 35/36 (Honeywell TFE731 )Learjet 60 (PWC PW305)Learjet Model 45 (Honeywell TFE731 )

TypefTasks

T1T1

T1

T1

T1T1

T1

T1 +T2T1 +T2T1 +T2T4

Bl+B2

C

T4T4T4T4

This approval schedule is limited to those trainings and examinations specified in the scope of work section of theapproved maintenance training organisation exposition.

Maintenance Training Organisation Exposition reference: MTOE V 13.0 dated 28.02.2021

Date of original issue: 01 .11.2009Date of this revision: 28.02.2021 Revision No: 28.02.2021/V 13,0

Head o}4afety Division AircraftAndreas Boss. Head of SectionTechnical Organisations Bern

EASA Form 11 issue 6