Q3 Mechanic's Marketplace 2015 Canada

Pricing Good Through September 30, 2015

73312

73311

Fluorescent Angle Lights• Circuit breaker protection• On/Off switch and grounded outlet in handle • Two adjustable hanging hooks that swivel 360°• Magnetic clip for convenient under hood use• 16/3 grounded power cords

Outdoor Extension Cords• Standard outdoor extension cord• 16/3 SJTW single tap cord• Rated: 13 amps, 125 volt, 1625 watts• Flexible to -40°F, water and weather resistant• UL listed

Part No. Description Normally SPECIALKTI73342 25 Foot Extension Cord

KTI73343 50 Foot Extension Cord

KTI73311• 25 Foot 16/3 cord• 13 Watt• Single bulb• On/Off switch

KTI73312• 25 Foot 16/3 cord• 26 Watt• (2) 13 watt bulbs• (2) independent On/Off switches

50 Foot 13 WattFluorescent Tube Light Reel• 18/2 SJT Cord, • Swivel Hook, Outlet in Handle• UL and cUL approved

KTI73318

Hands Free 14 LED Headlamp • 14 LED (75 lumens) headlamp • Hi / Low / Off switch • Adjustable headband • Ratchets up/down for focus direction • Approximate 7 hour run time • 3-AAA batteries (included)

KTI73398

30 LED SMD Retrofit Light• Trouble Light 30 LED SMD Retrofit• Twist on module converts an incandescent trouble light into a LED • 30 high powered SMD LED (300 lumens)• A rubber bumper protects the unit • Folding hanging hook fits into the head

KTI73379

24 SMD LED Worklight• 24 SMD LED (800 lumen) • Heavy duty face plate • Foam insulated handle• On / Off switch• Multi-position ratcheting head

Cordless RechargeableCharge time: 2 hoursRun Time: 2 hours full strength

KTI73373

Corded• A/C Power with 3 foot 18/3 SJTW cord

KTI73374

Powerful Magnet for Hands-Free use

Rechargeable LED Floodlight with Spotlight• Bright, white LEDs illuminate large areas• Single-element LED spotlight (100 lumens) direct-focused light where needed• Magnetic base powerful enough to position the flashlight vertically or horizontally• Durable construction of military-grade aerospace aluminum• Rugged enough to be used in the toughest environments yet lightweight and easy-to-use• Anti-roll hexagon shaped base• Recharge with 120 volt AC adapter or a 12 volt DC adapter (both included)• Approximate 4 hour use on full charge

Part No. Description Flood SpotLight SPECIALKTI73393 30 LED Rechargeable Worklight 3.6 Volt 180 Lumens 100 Lumens

KTI73394 60 LED Rechargeable Worklight 7.2 Volt 360 Lumens 100 Lumens

Exclusive Folding Option

30 SMD LED Rechargeable Folding Underhood Worklight• 30 LED SMD worklight with 7.4 volt / 2000 mAh Li battery• 6 Hour charge time • 3.5 hour approximate run time• Aluminum and ABS housing• Telescopic ends slide to a maximum of 74.75” • Two soft rubber covered brackets allow attaching the light to work area• Hi / Low / Off operation modes • AC & DC chargers included• Full extension length: 50.375” • Folded length: 26.875”

KTI73386

LIGHTING

Mechanic’sMarketplace

Fluorescent Tube Light 25’ 13 Watt 18/2Fluorescent work lights are cool to the touchand energy efficient. All fluorescent lights areUL and cUL approved. Adjustable hanginghook swivels 360 degree for easy hanging.On/off switch located in handle. • Length: 25’ • Cord: 18/2 SJT• Bulb: 13 watt

KTI73303

Halogen Work Light 500 WattIluminate the workshop, garage or job site with the power of bright halogen light All KTI fixtures use a 500-watt quartz halogen bulb (included), which emits brighter, whiter light and uses less energy. Features include: 5-foot power cord and small floor stand• Length: 5’ • Cord: 18/3 SJTW

KTI73370

Slimline 6 LED Rechargeeable Inspection Light• Super slim head at 1/4” thick by 11/16” wide• Up to 7 hours of light on a single charge• Generates 200 lumens at 15 feet• Micro USB receiver allows for multiple charging options• 3.7 volt Li-ion / 2200 mah rechargeable battery

KTI73389

Number and Letter Stamp Set - Size 3/16”Combination set includes 3/16” set of numbers and 3/16” set of letters. Includes convenient storage case.

KTI73400

K-Tool International recommends that the working load never exceed 1/3 of the rated capacity. Any strap assembly is only as strong as its weakest component, including the point of attachment or anchor.

Tie Downs & StrapsKTI73870 Ratcheting Tie Down (PVC-coated hooks) (each)• 900 lb. capacity • 1” width • 15’ length • 4-pack

KTI73871 Universal Tie Down (PVC-coated hooks) • 900 lb. capacity • 1” width • 10’ length • 1-pac

9.75” Professional 8-in-1 Quick and Easy Wire Stripper• Wire cutter, bolt cutter, wire stripper, and bending wire• Crimps insulated, non-insulated, and pin terminals

KTI56207

2 Ton Trolley Jack• Lifting Capacity: 2 Tons• Lifting Range: 5.3” to 13.2”• Lightweight and compact design for easy

handling and storage• Load-limiting and bypass valves prevent

against over loading and over extension• Grab handle for easy positioning and carrying• 1 Year Warranty on material and workmanship• Complies With ASME PALD/2009

Safety Standards

KTI63103

NEW

Bottle Jacks• Thick steel hydraulic base for maximum strength• Three-piece snap-fit pump handle for easy pumping and storage• Carrying handle included• Load-limiting and bypass valves prevent against over loading

and over extension of ram• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63230 - 30 Ton• 30 ton bottle jack with lift range from 11.2” to 18.27”

KTI63250 - 50 Ton• 50 ton bottle jack with lift range from 11.8” to 18.8”

NEW

KTI73871

Folding Knife Stainless Steel Satin Finish Blade• Stainless steel blade partially serrated with assist opening• Folded knife length: 4.750”, width: 1.438, height: .563; blade shaft length:

3.6875”, open knife length: 8.4375”• G10 handle • Reversible pocket clip

KTI73155NEW

Rechargeable 3W COB LED with pivot head• Rechargeable 3W COB LED• 3.7 volt 2200 mAh Li battery • 5 hour charging time • 2 hour run-time • ABS and rubberized housing • Super strong magnetic base• Rotating hook at the top that can be turned down • Light head pivots 80 degrees from the base and rotates 180 degrees• AC & DC chargers included

KTI73387

Aluminum 16 LED Flashlight• 16 LED (96 lumens) flashlight• Aerospace grade aluminum body• Rubber grip handle• Belt holster included• 3 - AAA batteries included

KTI73396

25 Foot Incandescent Trouble lights• Switch and auxillary outlet

in handle. • Metal cage guard. • Use with up to a 75 Watt

bulb (not included).

KTI7335825 Foot, 18/3 cord.

KTI7336025 Foot, 16/3 cord.

SSKTIDLR9CAN

$48.95 $64.95

$6.95 $28.95

$96.95

$66.95

$57.95$70.95

$101.95

$25.95 $30.95

$21.95$34.95$62.95

$94.95

$18.95$33.95

$15.95$54.95

$23.95

$19.95$41.95

$34.95

$10.95

$110.63

$241.95

$49.95

2

1/2” Drive

Individual 1/2” Drive SocketsTorque lug nuts to specs every time. “DW” refers to Deep Well Socket.

3/4” Drive

1” Drive

Individual 3/4” Drive Heavy Duty TruckTorque Limiting SocketsTorque lug nuts to specs every time.

20-4100

72101

72100Ratcheting Torque WrenchesRatcheting style, “clicks” when torque is achieved. All wrenches complete with molded storage case.

4 Piece Heavy Duty Truck Torque Limiting SetsFor large trucks and heavy equipment. Includes Red (1-1/4” x 250 ft/lbs), Brown (33mm x 475 ft/lbs), Black (1-1/2” x 475 ft/lbs), and Yellow (13/16” square x 475 ft/lbs). Available in 3/4” and 1” Drive.

TORQUE WRENCHES

TORQUE LIMITING SOCKETS

Click-Style Torque WrenchesThese torque wrenches are extremely accurate and easy-to-use. Simply adjust the torque specification on the wrench by releasing the red knob and turning the handle of the torque wrench while holding the shaft of the torque wrench. Features a ball detent socket retainer with push-button release for quick socket changes. Manufactured for accuracy, strength and reliability.

Accurate easy-to-use adjustment

Locking Ring ensures accuracy

Push-Button Release

Accurately torque wheel lugs to manufacturers recommendations

Use with 1/2” Dr. Impact Sockets (Not included)

Use with 1/2” Dr. Ratchets (Not included)

Individual 1” Drive

SAFETY FLARES

Digital Torque Adaptor 1/2” drive• Use digital torque adaptor with 1/2” drive ratchet• Static torque measurement• Three standard functions: torque setting, measurement

setting and mode setting• Operates is clockwise and counter-clockwise directions• Torque range is 29.5 - 147.5 ft-lbs

KTI72138

COIL SPRING TOOLS

10 Piece O.E. Torque Limiting Socket SetCovers a completely different list of vehicles from Accutorq’s original 10 piece kit. Includes Orange, Light Blue, Off-White, Mud, Light Tan, Light Yellow, Red-Orange, Quartz Gray, Charcoal, and Light Purple plus case, application chart and instruction sheet. ISO 9001 Certified.

ACC10-0323

PART NO. Individual Sockets SPECIALACC10-0340 14mm Mud, 80 ft/lbs.

ACC10-0304 17mm Green, 55 ft/lbs.

ACC10-0305 17mm Red, 80 ft/lbs.

ACC10-0329 17mm Off-White, 90 ft/lbs.

ACC10-0334 17mm Lt. Yellow, 113 ft/lbs.

ACC10-0306 19mm Yellow, 65 ft/lbs.

ACC10-0307 19mm Blue, 80 ft/lbs.

ACC10-0342 19mm Lt. Tan, 90 ft/lbs.

ACC10-0308 19mm Gray, 100 ft/lbs.

ACC10-0335 19mm Luminous Red DW, 110 ft/lb

ACC10-0341 19mm Quartz, 120 ft/lbs.

ACC10-0313 7/8” Turquoise DW, 140 ft/lbs.

ACC10-0309 21mm Black, 60 ft/lbs.

ACC10-0310 21mm Lt. Brown, 80 ft/lbs.

ACC10-0311 21mm Brown, 100 ft/lbs.

ACC10-0343 21mm Red Orange, 110 ft/lbs.

ACC10-0328 21mm Charcoal DW, 147 ft/lbs.

ACC10-0336 22mm Orange, 75 ft/lbs.

ACC10-0337 22mm Dark Green, 60 ft/lbs.

ACC10-0327 22mm Light Blue, 100 ft/lbs.

ACC10-0312 22mm White DW, 120 ft/lbs

ACC10-0338 22mm Pearl Copper, 110 ft/lbs.

ACC10-0339 22mm Pink, 154 ft/lbs.

ACC10-3898 22mm Lt Purple DW, 160 ft/lbs.

ACC10-3899 24mm Lt. Green DW, 140 ft/lbs.

8 Piece Torque Limiting Socket SetCovers most cars and mini-vans. Includes Green, Red, Yellow, Blue, Light Brown, Brown, Gray, and Turquoise, application chart and instruction sheet. ISO 9001 Certified.

ACC10-0321

10 Piece Original Torque Limiting Socket SetCovers most cars and light trucks. Includes all Green, Red, Yellow, Blue, Gray, Light Brown, Brown, White, Turquoise, and Light Green, plus case, application chart and instruction sheet. ISO 9001 Certified. Lifetime guarantee.

ACC10-0322

ACC20-4100 3/4” Drive 4 Pc. HD Truck Set

ACC20-4000 1” Drive 4 Pc. HD Truck Set

Part No. Description Torque Range Over-all Length SPECIALKTI72140 3/8” Drive Click-Style Torque Wrench 50-250 in/lbs. 8-3/4”

KTI72143 3/8” Drive Click-Style Torque Wrench 10-100 ft/lbs. 16-1/4”



KTI72145 3/4” Drive Click-Style Torque Wrench 100-600 ft/lbs. 39”

Part No. Description SPECIALKTI72100 3/8” Dr. Torque Wrench Torque Range: 20 to 200 in/lbs.

KTI72101 1/2” Dr. Torque Wrench Torque Range: 10 to 150 ft/lbs.

KTI72102 1/2” Dr. Torque Wrench Torque Range: 25 to 250 ft/lbs.

Tire Inflator GaugeRange from 10 to 120 lbs. shown in 2 lb. increments, 15” air hose with 1/4” female NPT, 6” chrome-plated dual-head chuck and 3/8” - 24 thread air inlet. Weatherproof aluminum body with corrosion-resistant brass valve. Withstands everyday use and abuse. Gauge and valve cartridges are replaceable. Magnifying bubble lens. Angled tip makes it easy to inflate tires on trucks with dual wheels.

KTI89002

Locking Lug Nut Remover KitRemoves locking lug nuts and locking hubcaps on most vehicles. For use with impact wrenches.

KTI71910

4-Way Lug WrenchesSAE Wrench. Sizes: 11/16”, 3/4”, 13/16”, and 7/8”. Chrome plated.

KTI71940METRIC Wrench. Sizes: 17mm, 19mm, 21mm, 23mm. Chrome plated.

KTI71980

7 Piece Torque Extension Set• 1/2” Drive torque extension set • Set includes: 55 ft/lb red color, 65 ft/lb yellow color, 80ft/lb green color, 100 ft/lb light blue color, 120 ft/lb white color, 140 ft/lb black color, 175ft/lb orange color.

KTI33350

PART NO. 1” Drive Sockets SPECIALACC20-3908 1-1/4” Red, 250 ft/lbs.

ACC20-3909 33mm Brown, 475ft/lbs.

ACC20-3910 1-1/2” Black, 475 ft/lbs.

ACC20-3911 13/16” Square Yellow, 475 ft/lbs.

ACC20-3913 33mm Greyline, 550 ft/lbs.

Digital Air Inflator• Range of 2 to 150 psi with 0.1 psi resolution• Boasts a dual head chuck and is accurate to within ±1% + 0.5psi

at 100psi and ±2% + 0.5psi at 150psi• Programmed to work with various units of measurement (psi/bar/

kpa/kg/cm2)• Works on TPMS equipped wheels• Features include a large face

LCD digital display, anti-oil rubber casting and ergonomic grip

KTI89001

Emergency Safety Flare • Applications in automotive, industrial, and marine• Nine flash patterns including the USCG approved SOS • For emergency situations & awareness in work areas• Positive Buoancy• Shatter, crush, and water resistant• Runs up to 100 hours on replaceable CR-123 battery

KTI79800

Rechargeable Emergency Safety Flare• Runtime up to 50 hours depending on flash pattern• Charger adapter included

KTI79801

Digital Torque Wrenches• 72 Teeth• Comes in black blow-molded storage case

Part No. Description Torque Range Over-all Length SPECIALKTI72133 3/8” Drive Digital Torque Wrench 14.5-73.8 in/lbs. 15”

KTI72134 1/2” Drive Digital Torque Wrench 29.5-147.5 ft/lbs. 19.375”

KTI72135 1/2” Drive Digital Torque Wrench 25-250 ft/lbs. 22.250”

Single Action Coil Spring Compressor Fits most American and some import cars.

KTI70375

MacPherson Heavy Duty Strut Spring Compressor• Works with most MacPherson Strut assemblies to quickly assist

in replacement of bent struts, strut tubes and damaged filters• Works on or off the vehicles. Acme threaded screw for durability• Made in USA.

KTI70371

Universal Strut Spring CompressorService a wide range of MacPherson struts without any special adapter shoes. Jaws are held by safety locking pins. Springs 4” to 9” O.D. and wire diameter of 7/16” to 11/16”.

KTI70372

McPherson Strut Spring Compressor • Works on most MacPherson strut assemblies• Use the compressor when replacing bent strut or strut tube

and damaged spindles• Acme threaded screw for durability• Not for use on GM “A”, “C”, “J” or “X” body cars• Use on or off vehicle • Made in the U.S.A.

KTI70370

PART NO. 3/4” Drive Sockets SPECIALACC20-3918 1-1/4” Red, 250 ft/lbs.

ACC20-3919 33mm Brown, 475ft/lbs.

ACC20-3920 1-1/2” Black, 475 ft/lbs.

ACC20-3921 13/16” Yellow, 475 ft/lbs.

72780

Professional Crimping Tools• Crimps non-insulated terminals• Easy to grip handles

Part No. Description SPECIALKTI56203 Crimping Tool 0.5/1.5/2.5/4.0/6.0 MM2

KTI56204 Crimping & Wire Stripper 1.5/2.5/6.0/10/16 MM

8.5” Professional Multi Purpose Crimper and Wire Stripper• Wire cutter, bolt cutter, and wire stripper in one• Crimps open barrel terminals• 3.2mm thickness

KTI56202

Heavy Duty Circuit Tester• For all 6 or 12 volt systems. • 5 Foot Heavy gauge flexible wire with ground clip and spring strain relief. • Clear handle, lights up - test result.

KTI72780

6/12 Volt Circuit TesterExtra Long 48” Lead, Clear Handle.

KTI72770

9” Professional Multi Purpose Crimper and Wire Stripper• Wire cutter, bolt cutter, and wire stripper in one• Crimps insulated and open barrel terminals

KTI56201

TORQUE ADAPTER

1/4” Drive Torque Wrench• Ratcheting style torque wrench “clicks” when torque achieved• Capacity: 30-150 in./lbs. • Overall length: 7-3/4”• Packaged in a blow molded case

KTI72117

FIRE SAFETYPyro Torch ShieldSize: 10” X 18”. Protect surfaces from sparks or open flame from gas torches. Will withstand even the extreme heat of acetylene torches.

KTI70440

Self Adjusting Wire StripperAutomatic wire stripper, wire cutter and crimping tool for solderless terminals.

KTI56208

Digital Disc Brake Caliper 0-6”Digital display from 0-6” (150 mm). Accuracy to plus/minus .001” (0.1 mm). Stainless steel construction and shockproof. Thumb wheel for ac-curacy and ease of use. English/metric readout.

KTI70816

55-piece Tire Repair KitEasily and quickly repair punctures in tubeless tires. Simply prepare the hole with the spiral reamer, load the plug into the insertion needles, and plug the hole. Components designed for professional use in rugged shop environments. Kit includes handy carrying case and can be used to repair tires on cars, trucks, RVs, motor homes and more. Includes: 2 Allen wrenches; 1 steel insertion needle; 1 steel spiral reamer; 1 50-pack 4” tire string plugs; 1 tub of tire plug lube; 1 blow-molded carrying case.

KTI71930

ELECTRICAL

TIRE TOOLS

$54.95

$359.95

$280.95

$351.95

$782.95$749.95

$46.95 $79.95

Your Choice $16.95

$119.95

$133.95$134.95$135.95$131.95$133.95

$85.95

$24.95

$35.95

$59.95$78.95

$251.95$41.95

$139.95$139.95$153.95$144.95

$30.95$30.95$30.95$30.95$35.95$30.95$31.95$33.95$34.95$27.95$33.95$35.95$34.95$34.95$34.95$38.95$35.95$30.95$27.95$30.95$35.95$24.95$25.95$38.95$35.95

$47.95

$59.95

$88.95

$115.95$121.95$171.95

$83.95$85.95$109.95$119.95$479.95

$16.95

$5.95

$12.95

$16.95

$34.95

$51.95

$14.95

$88.95

$35.95

$28.95

$22.95

SHOP EQUIPMENT

3

Air Hydraulic Foot Pump• 10,000 PSI air/hydraulic foot pump requires

90 PSI air pressure• Designed to be used with single acting cylinders• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63716

Bottle Jacks• Ram extension screw adjusts low height to get full use of ram travel• Load-limiting and bypass valves prevent against over loading and over extension• Ductile iron hydraulic base for added strength• 1 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

Part No. Description SPECIALKTI63201 2 Ton Bottle Jack Lifting Range: 6.2” to 12.1”

KTI63207 6 Ton Bottle Jack Lifting Range: 7.75” to 15.04”

XD Bottle Jacks• Ram extension screw adjusts low height to get full use of ram travel• Load-limiting and bypass valves prevent against over loading and over extension• Ductile iron hydraulic base for added strength• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

Part No. Description SPECIALKTI63213 12 Ton XD Bottle Jacks Lifting Range: 8.46” to 15.75”

KTI63221 20 Ton XD Bottle Jacks Lifting Range: 9.6” to 16.65”

KTI63214 12 Ton SHORT XD Bottle Jacks Lifting Range: 7.48” to 13.78”

KTI63224 20 Ton SHORT XD Bottle Jacks Lifting Range: 7.25” to 11.75”

Ratcheting Action

3 Ton Compact Service Jack• Capacity: 3 Tons • Lifting range: 5.3” - 18.5 “• Sealed hydraulic power unit prevents contaminants from entering system• Load-limiting and bypass valves prevent use

beyond rated capacity & over extension of ram• Complies With ASME PALD/2009 Safety Standards• 1 Year warranty on material and workmanship

KTI63131

Transmission Jack Adapter for Service Jacks• Capacity: 700 lbs• Saddle Forward and Backward Tilt: 35°• Easily transforms your service jack into a transmission jack• 2 Year Warranty on material and workmanship

KTI63134

1.5 Ton Scissor Jack• Lifting range from 4.1” to 15.2”• Large base for added stability• Long crank handle for ease of turning under load• All steel construction in a compact design for storage• 1 Year Warranty on material and workmanship

KTI63100

• 45.25” long pump handle for easy pumping under load• Dual pump piston power unit• Load-limiting and bypass valves to prevent use beyond rated

capacity and over-extension of ram• Complies With ASME PALD/2009

Safety Standards• 2 Year warranty on material

and workmanship

2 Ton Extra Long Low Profile Service Jack• 2 ton capacity extra long low profile service jack for easy access

under low ground clearance vehicles• Lift range from 2.75” to 24”• Raises saddle to maximum height in 8 full pump strokes - no load• Saddle diameter 3.85”

KTI63105

2 Ton Low Profile Service Jack• 2 ton capacity low profile service jack for easy access under low

ground clearance vehicles• Lift range from 3.5” to 18.1”• Raises saddle to maximum height in 6.5 full pump strokes - no load• Saddle diameter 4.3” • Weighs: 67.2 lbs.

KTI63101

800 Lb. H-Style Engine Stand• Capacity: 800 lbs • Weight: 49.8 lbs• H-frame design base with four wheels provides stability• Stand made of structural steel tubing for strength and

light enough for easy maneuverability• Fully adjustable mounting head and adapter fingers• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI62108

Jack Stands• Designed to be used in pairs• Steel base with four feet pads for stability• Ratchet action design with ductile iron support column• Complies With ASME PALD/2009 Safety Standards• 2 Year warranty on material and workmanship

1250 Lb Capacity Car Dollies• Pair of 1250 pound capacity car dollies used to move a disabled vehicle• Made of steel structural tubing for durability• Four bearing mounted swivel caster wheels for easy maneuverability• Two locking caster wheels on each dolly to prevent vehicle from moving• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63820

3/4 Ton Utility Underhoist Stand• Support under car components• Height range from 53” to 79”• Acme threaded screw for self-locking positioning• Bearing mounted spin handle for easy raising

and lowering of screw• 12” diameter base with 1.63” x 5.5” saddle• Complies With ASME PALD/2009 Safety Standards• 2 Year warranty on material and workmanship

KTI61076

• 3/4 Ton Utility Underhoist Stand with Pedal• Foot pedal to raise screw another 1.25” under

400 pounds of load

KTI61077

1500 Lb. Engine Sling• 1500 pound capacity engine sling for use with an engine crane• Level a load or adjust at angle for engine installation and removal• Hand crank and bearing mounted drive screw for easy adjustment• 4 mounting chains and brackets for quick attachment to engine• Complies With ASME PALD/2009 Safety Standards• 2 Year warranty on material and workmanship

KTI62115

LIFTING

Fuel Tank Adapter• Quick and easy installation to all

underhoist transmission jack saddles• Length, width, and height adjustments to handle any fuel

tank configuration up to 40 gallon capacity• Four 3” by 5.5” foam support pads self adjust and protect

the tank from damage• Ground wire assembly can be used with older metal tanks

to prevent against static electric discharge• 2 Year Warranty on material and workmanship

KTI63136

Part No. Description SPECIALKTI61202 3 Ton Jack Stands - Pair Lifting Range: 11.6” to 16.75”. Weight: 16 lbs.

KTI61205 6 Ton Jack Stands - Pair Lifting Range: 15.75” to 24”. Weight: 32.5 lbs.

KTI61211 12 Ton Jack Stands - Pair Lifting Range: 19.63” to 30.25”. Weight: 75 lbs.

1000 Lb Single Stage Transmission Jack• Capacity: 1,000 lbs. • Lifting Range: 43.625”- 71”• Saddle tilt: 23 degrees forward

and 16 degrees backward• For automotive use up to light duty pickup trucks• Foot pedal activation easily raises single ram under load• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63502

63213 63214

Ductile iron support column

Hand Pallet Jack• High-quality welded steel construction• Powder-coated finish for added durability• High-quality integrated cast cylinder• Weight: 187 lbs. • 6,500 lb. capacity• Maximum lifting height: 7” • Lowered fork height: 3”• 27” fork width • 48” fork length • 210° turning radius

KTI63800 4 Drawer Locking Service Cart• 500 lb. load capacity• Ball bearing drawer slides • Drawer liners for all drawers and trays• 5” Heavy-duty casters• Side impact bumpers• Gas shocks for lid• Cart dimensions: 35.2” length, 20.6” width, 40.3” height• Weight: 148 lbs.• Top drawer depth (2) 3”, Middle drawer depth 3”,

Bottom drawer depth 6”

KTI75146

1.5 Ton Foldable Engine Crane With Fast Rise• 750 Lbs. /1,500 Lbs. /2,250 Lbs. / 3,000 Lbs. capacity engine crane with four different boom positions• Legs and boom fold quickly for storage • 4.25” low profile base• Fast rise pump without a load• 48” long boom with chain and swivel hook included• 2 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63421

2 Ton Trolley Jack• Lifting Capacity: 2 Tons• Lifting Range: 5.3” to 13.2”• Lightweight and compact design for easy handling and storage• Load-limiting and bypass valves prevent against over loading and over extension• Grab handle for easy positioning and carrying• 1 Year Warranty on material and workmanship• Complies With ASME PALD/2009 Safety Standards

KTI63103

$49.95$73.95$49.95$73.95

$17.95$29.95

$401.95

$557.95

$184.95

$133.95

$31.95

$311.95 $209.95

$128.95

$212.95

$128.95

$139.95

$59.95

$194.95

$40.95$80.95$181.95

$741.95

$419.95

$519.95

$49.95

BIT SETS

4

22801

22870

21500

22601

3/8” Drive Hex Bit SetsHeat treated, chrome vanadium steel. Includes socket rail organizer.

SOCKET SETS

Socket Only SetsAvailable in fractional and metric sizes short and deep lengths. 6 and 12 point sockets.

Part No. Description Pieces Drive SPECIALKTI21500 Tamperproof Torx® Set. MADE IN USA. 12 Piece 1/4”, 3/8” Drive 1/4” Drive: T10, T15, T20, T25, T27, T30. 3/8” Drive: T40, T45, T50, T55 plus 2 bit holders

KTI22601 Torx® Bit Set. MADE IN USA. 12 Piece 1/4”, 3/8”, 1/2” Drive 1/4” Drive: T10, T15, T20, T25, T27, T30. 3/8” Drive: T40, T45, T47, T50, T55 1/2” Drive: T60

KTI22870 External Torq Socket Set. 10 Piece 1/4”, 3/8” Drive 1/4” Drive: E4, E5, E6, E7, E8. 3/8” Drive: E10, E12, E14, E16, E18

KTI22801 Torq Socket Set. 12 Piece 1/4”, 3/8” Drive 1/4” Drive: T10, T15, T20, T25, T27, T30. 3/8” Drive: T40, T45, T47, T50, T55, T60

KTI22671 External Scoket Set . MADE IN USA. 10 Piece 1/4”, 3/8” Drive

1/4” drive: E-5, E-6, E7 and E8; 3/8” drive: E-10, E-12, E-14, E-16, E-18, E-20.

Handheld Impact Driver3/8” square handheld driver includes detachable bit holder and four 5/16” hex bits. Ideal for loosening rusted screws, nuts and bolts.

KTI71700

Part No. Description SPECIALKTI22970 7 Piece Fractional Hex Includes bit sizes: 1/8” to 3/8”

KTI27970 7 Piece Metric Hex Includes bit sizes: 3mm to 10mm

Part No. Description Pieces Points Sizes SPECIALKTI26100 1/4” Drive Metric Socket Set 8 Piece 6 Point 6mm to 13mm

KTI26200 1/4” Drive Metric DEEP Socket Set 8 Piece 6 Point 6mm to 13mm

KTI27401 3/8” Drive Metric DEEP Socket Set 15 Piece 12 Point 7mm to 21mm

KTI27501 3/8” Drive Metric Socket Set 15 Piece 12 Point 7mm to 21mm

KTI22100 3/8” Drive Fractional Socket Set, 10 Piece 6 Point 5/16” to 7/8”

KTI22201 3/8” Drive Fractional DEEP Socket Set, 9 Piece 6 Point 3/8” to 7/8”

KTI27101 3/8” Drive Metric Socket Set, 13 Piece 6 Point 7mm to 19mm

KTI27201 3/8” Drive Metric DEEP Socket Set, 9 Piece 6 Point 10mm to 18mm

KTI22401 3/8” Drive Fractional DEEP Socket Set 13 Piece 12 Point 1/4” to 1”

KTI22501 3/8” Drive Fractional Sort Socket Set 13 Piece 12 Point 1/4” to 1”

KTI23110 1/2” Drive Fractional Shallow Socket Set, 13 Piece 6 Point 7/16” to 1-1/4”

KTI23200 1/2” Drive Fractional DEEP Socket Set, 8 Piece 6 Point 1/2” to 15/16”

KTI28100 1/2” Drive Metric Shallow Socket Set, 14 Piece 6 Point 15mm to 28mm

KTI28200 1/2” Drive Metric DEEP Socket Set, 10 Piece 6 Point 15mm to 24mm

KTI24105 3/4” Drive Fractional Add-On Socket Set, 5 Piece 6 Point 2-1/16” to 2-3/8”

BATTERY SERVICE

Simulate actual cranking loads

Battery Testers• Extremely handy and portable

way to load test suspected low charging batteries

• 10-second test cycle• Extra heavy nickel-plated

ventilated case, heavy duty cable, copper-plated clamps, and load safety switch to prevent arcing

500 Amp Carbon Pile Load Tester• 500 AMP adjustable load carbon pile • Tests 12 volt batteries rated to 1000 CCA or 160 AMP hour• 500 AMP side terminal clamps, heavy-duty stranded copper cables• Can also test alternators, regulators and starters• 15 second test with audible tone

KTI70210

125 Amp Digital Battery Tester • 125 Amp Loading Capacity• For 12 Volt batteries

KTI70216

100 Amp Battery Tester• Test 6 and 12 volt DC batteries. • 100 AMP load capacity• 0-16 volt analog display meter

with zero adjust

KTI70215

SOCKET ONLY SETS

FILTER PLIERS

Cap Oil Filter Wrench • 64/65MM 14 Flute for most Toyota applications• Cap style design allows easy removal and installation

from the end of the filter, even in tight locations• Use with 3/8” square drive

KTI73613N

Oil Filter Wrench Toyota/Lexus• Fits Toyota, Lexus, Scion, Honda and Nissan filters• Aluminum oil filter wrench• 64.5mm diameter with 14 flutes• Use with 3/8” square drive

KTI73630

Adjustable Oil Filter PliersFor removing spin-on filters with diameters from 2-1/4” to 6”. Self adjusting spring action. Made in USA.

KTI73620

Truck Filter PliersCapable of removing all agricultural and construction equipment and automotive canister type filters. Ideal for loosening over-tightened or seized filters. 17” extended reach increases leverage. Spring loaded pliers work on auto filters as well as Cummins diesel filters. Range: 4” to 7” diameter.

KTI73621

17 Piece Master Oil Filter Wrench Set• 3/8” drive cap oil filter wrenches• Fits 95% of domestic and import automotive applications• Complete set comes in a handy 10” x 13” plastic case• Includes: 80mm 15 flutes, 82mm 15 flutes, 86mm 14 flutes,

65/67mm 14 flutes, 68mm 14 flutes, 73/74mm 14 flutes, 64/65mm 14 flutes, 74/76mm 15 flutes, 76mm 14 flutes, 93mm 15 flutes, 76mm 30 flutes, 86mm 16 flutes, 88.4mm 15 flutes, 93mm 36 flutes, 93mm 45 flutes, 96mm 18 flutes, 100mm 15 flutes.

KTI73635

FILTER WRENCHES

DRAIN PANSSuper Single Axle Drain PanCatches oil, axle nuts, bearings - most anything removed from the wheel end for service. Works with most dual and super single wheel sizes 22.5 and 24.5, steel or aluminum wheels, hub piloted or stud piloted, drive or trailer axles. Attaches with a hand tightened lug nut. Will not tip or spill - virtually eliminating clean-up. Durable, lightweight HDPE plastic. Made in USA.

KTI74640

Drip TrayChemically resistant polyethylene. Size: 22” x 22” x 1-1/2” deep. Made in USA.

KTI74641

Fluid Measures with Flex Spouts• Chemically resistant polyethylene• Color: Translucent• Quart/Liter markings• Removable flex spouts• Flip top lids

FLUID MEASURESFLUID PUMPS FUNNELS

Double Capped Flex-Funnels

Funnels with a Screen• Chemically resistant polyethylene• Color: Safety RED• Made in USA

Double Capped Funnels• Eliminate spills and contaminants • Reduces debris• Chemically resistant polyethylene

KTI74607• 1 Pint capacity • Color: Orange• 3” Top ID • 1/2” Spout OD

KTI74608• 1.25 Quart capacity • Color: Dark Blue • 4” Top ID • 3/4” Spout OD

KTI74609• 1.3 Quart capacity • Color: Black• 4” Top ID • 1-3/8” Spout OD

KTI74611• 1.5 Quart capacity • Color: Yellow• 4” Top ID • 3/4” Spout OD

KTI74613• 1.66 Quart capacity • Color: Dark Red• 4” Top ID • 1-3/8” Spout OD

Splash Ring Flex Spout Funnel• 5.5” x 5.5” x 14.5” with removal flex spout• 1 Quart capacity • Color: Black• Complete with metal screen

KTI74605

KTI74606• 2 Quart capacity

KTI74610• 6 Quart capacity

3-Quart Drum Funnel with Hinged Lid• Tough industrial quality • Fits 2” threaded drums• Chemically resistant polyethylene

KTI74612

“The Guzzler” Pivot Funnel • Large capacity funnel has ball pivot at base of funnel• Directs flow without spilling • Made in the USA.

KTI74603

Drum Funnel• Threaded end screws on to 55 gallon drum• Durable, flexible • Made in the USA.

KTI74604

3 Piece Funnel Set• Includes: 3.5”, 5.5” and 7.5” diameter funnels• Chemically resistant polyethylene

KTI74630

KTI74650• 2 Liter capacity

KTI74651• 5 Liter capacity

Lever Type Barrel Pump• Telescopic suction tube for pumping contents from 15 to 55 gallon drums. • Includes brass piston ring. • Pumps agricultural and industrial chemicals, and other non-corrosive liquids. • Cushioned vinyl grip handle. • Removable threaded spout. • Dispenses approximately 300cc of liquid per stroke.

KTI72205

Hand Rotary Barrel PumpHeavy Duty capacity. Cast iron head with steel inlet/outlet tubing. 2 inch bung adapter. Ideal for heavy oil, machine oil and non-corrosive liquids. Pumps one gallon per 14 revolutions.

KTI72200

Two Way Radio• 22 channels each with 38 privacy codes• Up to 18 mile range • Belt clip• 5 ringing tones • Key lock function• Automatic battery save • Ear/mic/charger jack• Operating frequency 4

62.5625 MHz-462.7250 MHz

KTI70099

Siphon PumpMulti-use pump transfers most liquids. Also pumps air for inflata-bles. Use for changing oil, siphoning gas, inflating sports balls and beach toys. Includes two 51” siphon hoses, 35” dipstick hose and adapter (for changing oil) and 17” air pressure hose.Warranty information: 90-day warranty.

KTI72250

4-in-1 Oil Filter Wrench• Stainless, plated and easily interchangeable steel bands• Includes bands sized from 2-3/8”-4-3/8” (61 mm-111 mm)

KTI73600

22671

Part No. Description Pieces Points Metric Sizes Fractional Sizes Extention SPECIALKTI21044 1/4” Drive Fractional & Metric Socket Set (Standard & Deep) 44 Piece 6 Point 6mm to 13mm 3/16” to 9/16 2” & 6”

KTI26000 1/4” Drive Metric Socket Set (Standard & Deep) 21 Piece 6 Point 4mm to 11mm - 2”, 4” Universal Joint & Spinner

KTI21000 1/4” Drive Fractional Socket Set (Standard & Deep) 21 Piece 6 Point - 3/16” to 1/2” 2”, 4” Universal Joint & Spinner

KTI22047 3/8” Drive Fractional & Metric Socket Set (Standard & Deep) 47 Piece 6 Point 6mm to 19mm 1/4” to 7/8” 3” & 6”

KTI22547 3/8” Drive Fractional & Metric Socket Set (Standard & Deep) 47 Piece 12 Point 6mm to 19mm 1/4” to 7/8” 3” & 6”

KTI27000 3/8” Drive Metric Socket Set (Short & Deep) 26 Piece 6 Point 8mm to 21mm - 3” & 5/8” Spark Plug

KTI22000 3/8” Drive Fractional Socket Set (Short & Deep) 20 Piece 6 Point - 3/8” to 7/8” 2” & 3”

KTI20045 3/8” Drive Fractional & Metric Spline Socket Set (Standard & Deep) 45 Piece 6 & 12 Point 7mm to 19mm 5/16” to 7/8” 3” & 6”

KTI24121 3/4” Drive Fractional Socket Set (Standard) 20 Piece 6 point - 3/4” to 2” 4”, 8” & T-Handle Driver

KTI28000 1/2” Drive Metric Socket Set (Short) 17 Piece 6 point 15mm to 26mm - 5” & 17” Breaker Bar

KTI23000 1/2” Drive Fractional Socket Set (Short) 16 Piece 6 Point - 7/16” - 1-1/4” 5” & 17” Breaker Bar

KTI21000KTI23000

KTI22000

$16.95

$30.95

$39.95

$28.95

$24.95

$34.95

$24.95

$24.95

$14.95$20.95$43.95$29.95$21.95$28.95$24.95$29.95$42.95$29.95$51.95$43.95$55.95$64.95$131.95

$123.95

$66.95

$44.95

$5.95

$16.95

$27.95

$43.95

$59.95

$39.95

$83.95

$26.95

$17.95

$3.95

$6.95

$6.95

$6.95

$7.95

$4.95

$3.95 $6.95

$37.95

$8.95

$14.95

$3.95

$11.95

$20.95

$53.95

$16.95

$26.95

$89.95$55.95$52.95$126.95$126.95$70.95$60.95$150.95$270.95$94.95$90.95

WRENCHES

5

Professional Series ScrewdriversNon-slip triangular comfort grips. Chrome vanadium blades. Popular slotted and Phillips tips with a variety of different length blades.

00081

00082

00080

00071

0007200077

00097

00074

00089

00086

KTI Service KitsThese are assortments of consumable items that must be purchased by complete kits. The items inside these service kits are NOT available individually. Kits are NOT refillable.

ABD6

300

INSTALLER KITS

SERVICE KITS

KTI0

0047

ABD6

100

Installer Assortments• Refillable assortments. • Each item has been assigned a part number. • These kits offer the flexibility to purchase

only the most popular items.

KTI0

0040

HAND TOOLS

2209522092

23092

23095

Pro Series RatchetsHigh polish chrome finish, knurled handle and push button release. Thumb lever directional switch. Fine tooth ratchet mechanism.

22093

PRO-SERIES RATCHETS

Professional Series Combination Wrench SetsHigh polish smooth surface. Longer than standard combination wrenches. Heat treated. Available in fractional and metric sizes. New larger sets do not have kit bag organizers

Raised Panel Combination Wrench SetsRaised panel design. High polished chrome plated protects and prevents corrosion. Heat treated. All sets include kit bag organizers. 12 point box end. Available in fractional and metric sizes.

15 Piece Assorted Punch and Chisel Set5 pin punches, 5 starter punches, 3 cold chisels and 2 center punches in plastic tray.

Screwdriver Sets• Made of Chrome Vanadium steel

Part No. Description SPECIALKTI11008 8 Piece Screwdriver Set Sizes: 4 Slotted (5/16” x 6”, 3/16” x 4”,1/8” x 3”, 1/4” x 1-1/2”), 4 Phillips (#2x6”, #1x4”, #0x3”, #2x1-1/2”)

KTI11018 18 Piece Screwdriver Set Sizes: 4 Slotted, 4 Phillips, 10 Precision, 2 Slotted and 2 Phillips

KTI11035 34 Piece Screwdriver Set Sizes: 7 Phillips, 8 Slotted, 4 Torx, 2 Square, Bits Driver, 12 Bits and 4 Phillips

11018

11008

7 Piece Professional Series Nut Driver Sets• Alloy steel sockets and shafts (3 inch hollow shafts)• Ergonomic soft grip handles for comfort• Packaged in handy plastic hanging organizer

KTI14400 Fractional SetSizes: 3/16”, 1/4”, 5/16”, 11/32”, 3/8”, 7/16” and 1/2”

KTI14500 Metric SetSizes: 5mm, 6mm, 7mm, 8mm, 9mm, 10mm and 11mm

Part No. Description Over-all Length SPECIALKTI22092 3/8” Drive Pro Ratchet 7-3/4” Long

KTI22093 3/8” Dr. Swivel Head Ratchet, 180° Flex Head, Locks in 5 positions. 10-1/2” Long

KTI22095 3/8” Drive Pro Ratchet - Long Handle 11-3/4” Long

KTI23092 1/2” Drive Pro Ratchet 9-7/8” Long

KTI23095 1/2” Drive Pro Ratchet - Long Handle 15” Long

Part No. Description Sizes SPECIALKTI41300 9 Pc. Fractional Pro Series Set with Kit Bag 3/8” to 7/8”

KTI41800 13 Pc. METRIC Pro Series Set with Kit Bag 7 to 19mm

KTI41801 9 Pc. METRIC Pro Series Set, No Kit Bag 20 to 28mm

Part No. Description Sizes SPECIALKTI41011 11 Piece Fractional Raised Panel Wrench Set 3/8” to 1”

KTI41013 13 Piece Fractional Raised Panel Wrench Set 1/4” to 1”

KTI41014 14 Piece Fractional Raised Panel Wrench Set 3/8” to 1-1/4”

KTI41016 16 Piece Fractional Raised Panel Wrench Set 1/4” to 1-1/4”

KTI41513 13 Piece METRIC Raised Panel Wrench Set 7mm to 19mm

KTI41006 6 Piece Fractional Raised Panel Wrench Set 1-3/8” to 2”

Part No. Description Normally SPECIALKTI16002 5 Piece Pro Phillips Set Sizes: Stubby, 3”, 4”, 6”, and 8” Long

KTI16001 5 Piece Pro Slotted Set Sizes: Stubby, 3”, 4”, 6”, and 8” Long

KTI16000 10 Piece Pro Series Set Includes all screwdrivers from both KTI16001 & KTI16002 (Phillips & Slotted Assortments)

8 Piece Screwdriver SetsAssortment of 3 Phillips and 5 slotted blades. 5 Screwdrivers feature hex bolsters for wrench assist.

KTI19000 Black Handles KTI19700 Orange HandlesKTI19800 Red HandlesKTI19900 Green Handles

Part No. Description SPECIALKTI00071 150 Piece Hitch Pin Assortment Six different sizes 1-3/16” to 2-15/16” Long

KTI00072 300 “E” Clip Assortment 9 sizes from 1/16” to 7/8”

KTI00075 555 Cotter Pin Assortment Small Pins from 1/16” x 1” to 5/32” x 2-1/2”

KTI00077 300 Snap Ring Assortment Wide assortment of 18 different sizes.

KTI00078 144 Cotter Pin Assortment Large Pins from 1/8” x 2” to 5/16” x 2-1/2”

KTI00080 120 Pc. Auto Fuse Assortment Color coded fuses from 5Amp to 30Amp

KTI00081 120 Pc. Mini Auto Fuse Assortment Color coded fuses from 2Amp to 30Amp

KTI00082 56 Pc. Maxi Auto Fuse Assortment Color coded fuses from 20Amp to 100Amp

KTI00084 170 Pc. U-Clip & Screw Assortment Nine popular products in a variety of sizes

KTI00085 200 Pc. Hex Head Washer Drill Assortment 8 popular sizes, ranging from #8 to #10

KTI00086 270 Pc. HNBR O-Ring Assortment 17 sizes High Temperature Green (for A/C)

KTI00089 110 Pc. Copper Washer Assortment 6 sizes from 1/4” to 5/8”

KTI00091 125 Pc. Grommet Assortment 18 different sizes

KTI00093 120 Pc. Roll Pin Assortment 30 different sizes

KTI00094 407 Pc. Universal O-Ring Assortment Sizes: 1/8” to 2” ID and 1/4” to 2-1/4” OD

KTI00095 419 Pc. Universal O-Ring Assortment Sizes: 3mm to 50mm ID

KTI00096 110 Pc. Metric Grease Fitting Asst. 6mm and 10mm fittings, straight, 45° and 90°

KTI00074 110 Pc. Fractional Grease Fitting Asst. 1/4-28 &1/8-27 fittings, straight, 45° and 90°

KTI00097 157 Pc. Wire Terminal Assortment Solderless wire connectors 18GA to 10GA

KTI00087 360 Pc. Wire Terminal Assortment Solderless wire connectors 18GA to 10GA

4 Piece Roll-End Pry Bar SetOne each: 6”, 12”, 16” and 20” pry bars.

KTI71600

Part No. Description SPECIALABD6000 90 Piece GM Body Retainer Kit Specifically for GM

ABD6100 82 Piece FORD Body Retainer Kit Specifically for FORD

ABD6300 65 Piece Push Type Body Retainer Kit For use on All vehicles

KTI00040 75 Piece Vacuum Tee Cap Kit 1/8”, 3/16”, 1/4”, 5/16” and 3/8” caps

KTI00047 95 Piece Brake Line Fittings Assortment For British, European and Japanese systems

Auto Loading Folding Utility Knife• Folded length is 4.3125 inches• Open length 6 inches

KTI73102

Extra Heavy Duty Hacksaw• All metal heavy duty frame• High leverage tensioner blade can be set at 45 degrees or vertical• Handle with blade storage compartment

KTI72802

12” Tubular Hacksaw • Adjustable tensioner • Includes one saw blade

KTI72801

5 Piece Chisel Set3/8”, 1/2”, 5/8”, 3/4” and 7/8” cold chisels.

KTI73000

6 Piece Pin Punch SetIncludes sizes: 3/32”, 1/8”, 5/32”, 3/16”, 1/4” and 5/16”.

KTI72900

Part No. Description SPECIALKTI72901 15 Piece Punch & Chisel Asst. Packaged in a plastic tray

KTI72901K 15 Piece Punch & Chisel Asst. with kit bag organizer

Jumbo Size, Designed for Heavy Duty Trucks and Commercial Equipment

Interchangeable Screwdriver Set• Includes: #1 phillips and 3/16” slotted; #2 phillips and 1/4” slotted;

#3 phillips and 5/16” slotted. Rubber o-ring provides a secure, non-slip grip

• Each screwdriver bit boasts a 2-5/8 ” blade at each end (6” overall bit length) and a hex bolster for wrench assist (7/16” fractional or 11mm metric

KTI11100

X-Long Double Box Ratcheting Flexible Reversible Spline Wrench Sets• Forged of chrome-vanadium steel and heat-treated for durability• Feature a 72-tooth design with a high polish finish and are nearly 40% longer• Ratcheting box end needs as little as 5 degrees to move fastener• Sleek head design and slim dimensions further ease of working in confined areas• All KTI wrenches carry a lifetime warranty• Packaged in a blow-molded case

KTI43100 - 4-Piece Fractional Set includes: 5/16” x 3/8”, 7/16” x 1/2”, 9/16” x 5/8” and 11/16” x 3/4”

KTI43500 - 5-Piece Metric Set includes: 8mm x 10mm, 12mm x 13mm, 14mm x 15mm, 16mm x 18mm and 17mm x 19mm

7-Piece Ratcheting Wrench Sets• Ratcheting box end needs as little as 5 degrees to move fastener• Designed to reduce fastener rounding • Lifetime warranty

KTI45400 - Fractional 5/16” to 3/4”KTI45500 - Metric 8mm - 18mm

Ratcheting Reversible Wrench Sets• Ratcheting box end needs as little as 5 degrees to move fastener• Lifetime warranty

KTI45900 - 13 Piece, Fractional 1/4” to 1”KTI45600 - 16 Piece, Metric 8mm - 24mm

4-Piece Pick SetIncludes four picks for removing, installing, aligning, probing and piercing. Use to ease removal of O-rings, split pins, seals and bushes and loose parts. Set contains orange-handled straight, 45 degree, 90 degree and hook picks.

KTI70070 - Neon Orange HandlesKTI70075 - Neon Green Handles

Sanding PenOver 20,000 glass fibers in a pen point reach where normal sand paper cannot. Includes one extra sanding point in rear cap. U.S.-made.

KTI70550KTI70551 - 2-pack refill for sanding pen

Ratcheting Hose and Pipe Cutter• Materials up to 1-1/2” in diameter• The ratcheting action makes cutting smooth and easy • A one-touch, quick release lever opens pliers instantly• Built-in clasp securely locks handles when not in use for added safety• Lifetime warranty

KTI72355

Folding Knife Stainless Steel, Black Finish Blade, Partially Serrated With Assist Opening• Stainless steel blade partially serrated with assist opening• Folded knife length: 4.750”, width: 1.438”, height: .563”;

blade shaft length: 3.6875”, open knife length: 8.4375”• G10 handle • Reversible pocket clip

KTI73150 NEW$32.95

$32.95

$35.95$46.95$40.95$44.95$49.95

$64.95$78.95$119.95

$55.95$68.95$94.95$110.95$49.95$206.95

$50.95

$10.95

$16.95

$11.95

$32.95

$24.95

$51.95

$51.95

$29.95

$31.95

$63.95

$9.95$9.95$7.95$7.95$10.95$12.95$16.95$68.95$9.95$9.95$23.95$15.95$9.95$9.95$15.95$15.95$20.95$19.95$12.95$31.95

$27.95$32.95$32.95$23.95$139.95

$16.95

$21.95

$40.95

Your Choice $21.95

Your Choice $12.95

$23.95

$10.95

$26.95

$6.95

$4.95

$73.95

$234.95

$174.95

$73.95

$263.95

$224.95

Create Double, Single and Bubble flares in seconds

TUBING TOOLS

TEST & BLEEDRIVET TOOLS

SERPENTINE BELT TOOLS

SPARK PLUG REPAIR

6

70301 70303 703067030470302

2 and 3 Jaw Reversible PullersThe reversible jaws feature a wide face on one end and a narrow face on the other. Jaws grip tighten as pressure is applied. Drop forged. Alloy steel, hardened to 45 HRc. Lifetime guarantee.

70305

71501 71502

PULLING TOOLS

BALL JOINT & TIE ROD TOOLS

Bearing SeparatorsRemove generator gears, bearing cones, bearings and other similar parts. Designed to reduce risk of damage to the part. Flush knife-edge blades get behind work when most puller jaws cannot fit or grip.

Universal Nut Splitter• Medium Duty Nut Splitter• Rugged drop forged frame• Splits rusted or frozen nuts 1/8” to 15/16” across flats• Parallel action of pusher cracks nuts on one side without

damage to bolt threads• Compound angle design with 360 degree rotating cutter

allows use in difficult to reach locations

KTI70715

Ball Joint Service Tool and Master Adapter Set• For removing and replacing ball joints• Remove and replace universal joints by using the C-Frame press• Includes one live center forcing screw, receiver tubes, and removing/

installing adapters• Works on most Ford, GM, and Dodge 2 and 4 wheel drive pickups,

vans and sport utility vehicles through 1997

KTI71556

Hydraulic Flaring Tool Kit• Create precision 45 degree double,

single and bubble flares in seconds• Brake flaring tool works with stainless

steel, steel, and soft metal tubing• Use for brake lines, transmission cooler lines, and fuel lines• Kit contains: brake flare forming tool, 3/16” and 1/4” tube retaining

dies, adapters, handle, user manual, and storage/carrying case

KTI70082

ADHESIVE

Bonds Almost Anything in Seconds

17” Super Duty Hand RiveterHand Riveter, Super Duty, with 5 Nosepieces. 17” Long Handles.Nose pieces: 1/8”, 5/32”, 3/16”, 7/32” and 1/4”.

KTI79110

Pulley Puller & Installer SetComplete set removes and installs most power steering and alternator pulleys on domestic vehicles. Works on V-shaped pulleys and serpentine belt system pulleys.

KTI70300

Harmonic Balancer InstallerEasily install balancers and drive pulleys. Includes eight threaded adapters: 7/16”-20, 1/2”-20, 9/16”-20, 5/8”-20, 3/4”-16, M12-1.5, M14-1.5 and M16-2.0. Made in USA.

KTI70343

Steering Wheel PullerPrevents damage to steering shaft threads. Will remove the steering wheel from most passenger cars & light/medium duty trucks. Contains five sets of side bolts. Made in USA.

KTI70330

Harmonic Balancer PullerThis puller will pull harmonic balancers on most automobiles. It will pull parts with tapped holes like flywheels, gears and pulleys. Tool includes 5 sets of side bolts. Made in USA.

KTI70344

Pitman Arm Puller - ProfessionalThe heavy duty yoke is drop forged from alloy steel. Both the yoke and the center screw are heat treated. Made in USA.

KTI70365

Part No. Description SIZE REACH SPREAD TONNAGE SPECIALKTI70301 2 Jaw Reversible Puller 3” 3-1/4” 4” 2 Ton

KTI70302 2-3 Jaw Reversible Puller 3” 3-1/2” 4-3/4” 2 Ton

KTI70303 2 Jaw Reversible Puller 4” 3-1/4” 6” 5 Ton

KTI70304 2-3 Jaw Reversible Puller 4” 3-1/4” 7” 5 Ton

KTI70305 2 Jaw Reversible Puller 6” 3-1/4” 6” 5 Ton

KTI70306 2-3 Jaw Reversible Puller 6” 3-1/4” 7” 5 Ton

Serpentine Belt ToolReleases tension on serpentine belts with a spring loaded idler pulley. Used to remove and install serpentine belts. Fits idler pulleys requiring 13mm, 15mm, 16mm, 18mm hex or 3/8” square drive socket sizes.

KTI70720

Rear Axle Bearing Puller SetMake easy work of removing semi-floating rear axle bearings. 3 sizes to service most domestic cars. Use with slide hammer.

KTI70380

Heavy Duty Dent Puller KitIncludes 10 lb. Slide Hammer, 2 Pipes (one 2 hole and one hex nut), chain with hook and 5 Plate puller attachments.

KTI70500

Tie Rod End ToolAble to remove the inner tie rod without removing the outer tie rod. Simply slide the tool over the tie rod end and tighten the collar to allow access with an extension. Works with a 3/8” drive extension. Fits most inner tie rods.

KTI71519

Part No. Description SPECIALKTI71501 Tie Rod Separator 11/16” Opening between tines

KTI71502 Ball Joint Separator 15/16” Opening between tines

Slide Hammer Puller KitEasy removal of flange-type axles, oil seals, bearings and other press fit parts. Includes 5 lb. Slide Hammer, 8 function 3 Jaw Puller, 2 Jaw Puller, Puller Hook, Rear Axle Puller, Dent Puller and Grip Wrench Adapter.

KTI70510

Tubing BenderBend copper, steel or aluminum tubing without collapsing or kinking. Bends 3/16”, 1/4”, 5/16” & 3/8”.

KTI72320

Double Flaring Tool KitIncludes 7 adaptors. For brake and fuel lines. Adapters: 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, and 5/8”.

KTI70060

Professional Double Flaring Tool KitProvides safer flare for brake and fuel lines. Center screw is made of high grade alloy steel and swivel is heat treated, precision ground and plated to reduce friction. Includes 5 adapters (3/16”, 1/4”, 5/16”, 3/8” and 1/2”) each stamped with the size for easy identification. Made in USA.

KTI70080

Miniature Tubing CutterCuts 1/8” to 5/8” OD tubing. Compact size for use in confined areas. Features rollers to ease operation.

KTI72310

Heavy Duty Tubing CutterCuts 1/8” to 1-1/8” OD tubing.

KTI72330

Heavy Duty Tubing BenderBends 1/4”, 5/16” and 3/8” OD aluminum, steel and copper tubing.

KTI72340

Heavy Duty Tubing Bender PlierBends 3/16”, 1/4”, 5/16” and 3/8” diameter copper and steel tubing without collapsing or kinking.

KTI72345

Metric Bubble I.S.O. Flaring Tool KitWill create the I.S.O. flare on brake lines without removing the brake line from the vehicle. Includes yoke assembly, flaring bar, gauge, wrench and 4 adapters: 4.75mm (3/16”), 6mm, 8mm and 10mm.

KTI70085

Professional Brake Flaring Tool KitThis brake flaring tool will pay for itself with the first project, and it’ll give you peace of mind knowing that your brake flares are of OE-precision quality and safety. Mounts in your vise to help you easily form 45° double, single and bubble flares in OE steel, stainless steel, and soft metal tubing. Use with 3/16”, 1/4”, 5/16” and 3/8” diameter lines...which means it will handle all your plumbing jobs from brake lines to transmission cooler lines and fuel lines. Turret-style design allows you to make those precision flares in minimal time. Brake flaring forming dies are mounted right on the turret, so there’s no fumbling for small parts or missing dies. T-handle screw clamp holds line in place while forming.

KTI70081

Part No. Description SPECIALKTI70382 Threaded holes 5/8”-18 Sizes: 0” to 4-1/4”, Made in USA.

KTI70383 Threaded holes 3/8”-16 Sizes: 0” to 2-1/4”

KTI70384 Threaded holes 5/8”-18 Sizes: 0” to 4-1/4”

Ford Spark Plug Porcelain Extractor Set • Extract broken porcelain from spark plug sleeves• For use on Ford Triton engines model year 2004 and later• Works in conjuction with KTI Spark Plug Extractor Set• Meets Ford TSB specifications

Uses a special bonding agent to extract porcelain from spark plug sleeve without pushing on the broken plug and potentially pushing it into the cylinder causing engine damage. Works in conjunction with the KTI spark plug extractor set (KTI75201). Meets Ford TSB specifications. Lifetime warranty.

KTI75202

Ford Triton Spark Plug Extractor• Extract frozen and broken off spark plug sleeves• For use on Ford Triton engines model year 2004 and later• Specially machined guide works with extra-long tap and extractor• Avoid potential engine damage• Saves time by doing the job right the first time!

Avoid engine damage by using the KTI spark plug porcelain extractor set (KTI75202) to remove broken porcelain before extracting spark plug sleeve. Lifetime warranty.

KTI75201Pilot Bearing Puller Slide HammerCenter and rod design spreads the forged steel jaws, pushing them out against the bearing. Jaw spread 1/2” to 1-1/2” capacity. Made in USA.

KTI70356

Pilot Bearing PullerUse to remove fly wheel pilot bearings 7-1/2” long. Also works as a bearing and bushing puller for generators and starters. 1/2” to 1-1/2” I.D. capacity. Made in USA.

KTI70355

Steel Line Stopper Kit• Universal steel line stopper• 5/16”, 3/8”, 1/2”, and banjo fittings (10.4mm and 18mm)• Clamp and seal steel lines for all automotive fluids• Provides an effective seal to steel lines

when disconnected• Prevents fluid loss and contamination

of the work area

KTI75306

Automotive Tester and Bleed Kit• Handy for troubleshooting and tune-ups• Dial gauge indicates pressure in inches and centimeters of mercury • Perform hundreds of automotive diagnostic tests including on fuel petcocks, carburetors & vacuum advance • One person brake bleeding kit: bleeds brakes, clutches or other hydraulic systems• Bleeding kit includes fittings, hose

and 114 page instruction manual

KTI72261

Q-Bond® Adhesive Repair Kit• Rock solid in 10 seconds!• Ultra-strong adhesive and reinforcing powders• Repairs can be grinded, filed, sanded and even painted!• Includes 2 Q-BOND adhesive; 1 black reinforcing powder; 1 grey reinforcing powder

KTI90002

Heavy-duty RiveterFeatures four different nose pieces to secure rivets: 3/32” (2.4 mm), 1/8” (3.2 mm), 5/32” (4.0 mm) and 3/16” (4.8 mm). Includes rivet samples.

KTI79100

$32.95

$178.95

$239.95$65.95

$53.95 $62.95

$22.95 $27.95

$25.95

$35.95

$46.95

$127.95

$19.95

$127.95

$16.95

$30.95

$39.95

$7.95

$12.95

$35.95$26.95

$45.95

$291.95

$21.95

$66.95

$40.95

$27.95

$43.95 $46.95

$14.95

$22.95$26.95$31.95$35.95$38.95$43.95

$13.95

$12.95

$55.95

$31.95

$54.95

$24.95

GRINDERS

Steel Bench Vises• Lockable swivel bases• 10 year warranty

Part no. description SPECIALKTI64105 5 inch Wide Bench Vise Opens to 7 inches

KTI64106 6 inch Wide Bench Vise Opens to 8 inches

KTI64108 8 inch Wide Bench Vise Opens to 9 inches

TAPES

AIR TOOLS

AIR HOSE

ELECTRIC IMPACT

Impact Socket Sets• Chrome Moly Steel construction• Thin wall impact quality sockets• Ideal for rugged, professional, environments• Laser engraved for quick identification• Heat treated 6 Point impact sockets• Blow molded cases, except KTI34200 and KTI34201 are shipped loose

38202

Big Pack Abrasive Cut-Off Discs

700133523339233

Individual Budd Wheel SocketsFor outer cap nuts on Budd style truck wheels. Manufactured from heat-treated chrome-moly steel for wear in professional, rugged environments.

33101

Rubber Air HoseSolid brass end MNPT fittings. Protective PVC bend restrictor ends. Abrasion-resistant rubber outer jacket. 300 PSI working pressure.

CUT-OFF DISCS BUDD WHEEL

Remove nut & stud with one socket

71303

Abrasive Cut-Off Discs25,000 Rpm maximum speed. Cut mufflers, light metals, fiberglass & more. 3 inch diameter discs with 3/8 inch hole for arbor.

7

IMPACT SOCKET SETS

Part No. Description SPECIALKTI72014 25 Foot Rubber Air Hose

KTI72015 50 Foot Rubber Air Hose

POLISHERSProfessional10 inch Waxer/ Polisher Powerful .65 amp motor. 2,580 rpm (no load). Ball bearing construction. High impact ABS housing. Includes 1 terry cloth bonnet. 110V.

KTI10210

7” Variable Speed Polisher11 Amp electric motor, dial speed control. Variable speed 1000 - 3000 RPM. Overload protection, 3 position side handle, rubberized for better grip and 7” diameter pad. UL listed.

KTI10215

tPart No. Description Pieces Drive Sizes SPECIALKTI32100 Fractional Impact Socket Set 9 Piece 3/8” Drive 3/8” to 7/8”

KTI32200 Fractional DEEP Impact Socket Set 9 Piece 3/8” Drive 3/8” to 7/8”

KTI37100 Metric Impact Socket Set 10 Piece 3/8” Drive 10mm to 19mm

KTI37200 Metric DEEP Impact Socket Set 10 Piece 3/8” Drive 10mm to 19mm

KTI33100 Fractional Impact Socket Set, 12 Piece 1/2” Drive 1/2” to 1-1/4”

KTI33101 Fractional Impact Socket Set 19 Piece 1/2” Drive 3/8” to 1-1/2”

KTI33200 Fractional DEEP Impact Socket Set, 12 Piece 1/2” Drive 1/2” to 1-1/4”

KTI33202 Fractional DEEP Impact Socket Set 19 Piece 1/2” Drive 3/8” to 1-1/2”






KTI34100 Fractional Impact Socket Set, 8 Piece 3/4” Drive 1” to 1-1/2”

KTI34200 Fractional DEEP Impact Set, no case 8 Piece 3/4” Drive 1” to 1-1/2”

18 Piece 1” Drive Fractional Impact Socket SetFractional short sockets 3/4” to 2”, impact extensions (3” and 6”), and replacement o-rings & pins. 6 Point. Heavy duty storage case.

KTI35100

15 Piece 3/4” Drive Metric Impact Socket SetIncludes metric short sockets from 17mm to 46mm and replacement o-rings & pins. 6 Point. Complete with heavy duty storage case.

KTI39100

Mini Die Grinder25,000 rpm. 1/4” Collet. Features rear exhaust, independent power regulator and variable speed throttle.

KTI87125

Die Grinder22,000 rpm. 1/4” Collet. 1/2 HP motor, built-in power regulator, variable speed throttle. 5-1/2” over-all length.

KTI87132

Gearless Angle Die Grinder25,000 Rpms. 1/4” collet excepts 1/8”, 1/4”, 3mm and 6mm shanks. Lightweight housing reduces vibration.Overall length: 6-1/4 inches.

KTI87128

Mini Angle Die Grinder20,000 rpm. 1/4” Collet. Features rear exhaust, independent power regulator and variable speed throttle.

KTI87126

Part No. Description SPECIALKTI71301 25 Pack Cut-Off Discs 3” x 1/16” x 3/8”

KTI71300 50 Pack Cut-Off Discs 3” x 1/16” x 3/8”

Part No. Description SPECIALKTI71303 6 Pack Cut-Off Discs 3” x 1/32” x 3/8”

KTI71306 6 Pack Cut-Off Discs 3” x 1/16” x 3/8”

KTI70013 Drill Arbor for Cut-Off Discs5 Piece 1” Drive Budd Wheel Service KitUse with 1” drive impact. Set includes 33mm Hex, 35mm Hex x 17mm Square Deep, 38mm Hex x 20mm Square Deep, 41mm Hex x 21mm Square Deep and 1-1/2” Hex x 3/4” Square Deep Budd Wheel Sockets.

KTI35005

PART NO. Description SPECIALKTI39233 3/4” Dr. 33mm Deep Hex

KTI35233 1” Dr. 33mm Deep Hex

3 Foot Rubber Whip Hose3/8” ID rubber hose with 1/4” NPT male brass fittings. 300 PSI. Color: RED.

KTI72000

Swivel End Whip Hoses3/8” ID rubber hose with 1/4” MNPT brass swivel on one end and 1/4” NPT male brass fitting on the other. 300 PSI. Color: RED. Available in 3 and 6 foot lengths.

KTI72007 3 Foot

KTI72008 6 Foot

Hose Reel 3/8” x 50 Foot• All steel contruction • Slotted mounting base - easy install • Spring powered auto recoil• 8 position ratchet system• 50 foot red rubber air hose 3/8” I.D. • PVC bend restrictor• Solid brass ferrule, 1/4” male NPT• 300 PSI

KTI71000

7 Piece 1/2” Drive Thin Wall Protective Socket Set• Sockets made of chrome moly steel• Complete set comes in a handy plastic case• Includes: 17mm blue , 19mm gold , 21mm red , 13/16” purple,

7/8” green , 1” titanium color, and 1-1/16” black

KTI33300

1/2” Drive Electric Impact7 Amp. 235 ft/lbs. of torque. 2,100 RPM. Complete with an extra set of screw in brushes.

KTI81380

Part No. Description Size Fittings SPECIALKTI72001 Rubber Air Hose - Red 3/8” x 25 Foot 1/4” MNPT

KTI72002 Rubber Air Hose - Red 3/8” x 50 Foot 1/4” MNPT





KTI72010 Rubber Air Hose - Yellow 3/8” x 25 Foot 1/4” MNPT



Stays flexible in extreme temperatures

Reinforced side plates are powder coated to resist corrosion

BluBird Rubber Air Hoses• 100% rubber air hose• Heavy duty, ultra light weight and super strong• BluBird 3/8” ID, 300 PSI, 1/4” NPT fittings with brass

ferrules and a bend restrictor to reduce kinking• Stays flexible in temperatures from

-50 degree to 180 degree Fahrenheit• Ozone and abrasion resistant EPDM blended cover

VISES

6” Heavy Duty Bench Grinder• Fully enclosed, pre-lubricated ball bearings• Adjustable acrylic eye shields deflect sparks. Adjustable tool rests.• Includes fine (60-grit) and course (36-grit) wheels• Cast iron motor housing• 3450RPM (no load). 1/3 HP, 115V motor. UL listed.

KTI60060

Electric 4-1/2” Angle Grinder5 amp; 11,000 rpm no-load speed; 120 volt AC rating. A spindle lock makes changing the wheel quick and easy. Includes a wheel guard, wrench and flange. Ergonomic, removable reversible side handle. UL listed.

KTI10010

00035 07740

Heat Shrink Tube AssortmentsAllows protection and insulation of automotive wires, electrical and mechanical components from heat, moisture, and corrosion. Quick and simple to shrink by heat gun.

00033 00034

400 Piece Cable Tie AssortmentConvenient dispenser type package allows access to each compartment separately. Made in USA. Color: UV Black.Includes: (200) 4 inch, (100) 7 inch and (100) 11 inch long cable ties.

KTI78004

Part No. Description Shrink Ratio Length Diameters SPECIALKTI00033 216 Piece Set - Black/Red 2:1 45 & 75mm 2.5, 3.5, 4.5, 6, 10mm

KTI00034 105 Pc Double Wall Set - Blk/Red 3:1 45 & 75mm 3.2, 4.8, 6.4, 9.5, 12.7mm

KTI00035 85 Piece Set - Black only 2:1 6 inch 1/8”, 3/16”, 1/4”, 3/8”, 1/2”

KTI07740 235 Piece Set - Assorted colors 2:1 6 inch 3/32, 1/8, 3/16, 1/4, 3/8, 1/2, 5/8, 3/4’

Nylon Tie Tightening Tool• Grips nylon cable ties and tightens with very secure grip• Also cuts excess with thumb lever

KTI76000

Thread Sealing TapeEach roll measures 1/2” wide x 260”. Ideal for sealing threaded pipe. 5-pack.

KTI73550

Duct TapeMultipurpose gray duct tape for numerous uses. Roll measures 2” wide x 60 yards. U.S.-made

KTI73560

Black Electrical TapeRoll measures 3/4” wide x 60’. Sold in sleeve of ten rolls.

KTI73510

$48.95 $142.95

$534.95 $256.95

$45.95

$51.95 $85.95

$90.95

$149.95

$7.95 $11.95

$14.95

$155.95

$76.95

$154.95

$20.95$37.95

$28.95$43.95$28.95$43.95$58.95$117.95$96.95$187.95$50.95$130.95$76.95$77.95$222.95$104.95$148.95

$32.95

$62.95

$8.95

$8.95

$5.95

$26.95

$25.95

$19.95$34.95$27.95$49.95$28.95$50.95$21.95$28.95$37.95

$160.95

$199.95

$261.95

$85.95$64.95

$20.95

$15.95

$12.95$34.95$36.95$21.95

$11.95$5.95

$15.95

NEW

8

Knife and Multi-Tool 2 Piece Combo Pack• Folding knife and 9-in-1 multi-tool set• Ergonomic aluminum handle with pocket clip• Stainless steel blade • Lightweight tools• Black finished 420 stainless steel blade• The multi-tool includes: plier, saw, saw for wood, flat screwdriver,

phillips screwdriver, knife blade, file, can opener and bottle opener

FMCFDK1

3 Piece Plier Set, 6” Slip Joint, Diagonal and Long Nose• 3 piece plier set, 6” slip joint, diagonal and long

nose are a good addition to any toolbox• Ergonomic soft grip Ford handle for gripping power• Made of carbon steel,

lightweight and easy to use• Machined jaws help

grip securely

FMCFHT0099

3 Piece Plier Set With 8” Combination, 6” Diagonal and Long Nose• 3 Piece plier set, 8” combination, 6” diagonal and long nose are a

good addition to any toolbox• Set includes multiple styles for a wide range of uses and applications• Made of carbon steel, lightweight and easy to use• Machined jaws help grip securely

FMCFHT0100

4 Piece Plier Set - 8” Universal, 6” Long Nose, Slip Joint, and Diagonal• 4 Piece Plier Set includes 8” universal, 6” long nose, slip joint, and

diagonal which make this set a good addition to any toolbox• Multiple styles for a wide range of uses and applications• Ergonomic soft grip Ford handle for gripping power• Made of carbon steel • Lightweight and easy to use

FMCFHT0101

5 Piece Plier Set With Locking Pliers and Adjustable Wrench• 5 Piece plier set with locking pliers and adjustable wrench

are a good addition to any toolbox• Ergonomic soft grip Ford handle for gripping power• Made of carbon steel, lightweight and easy to use• Machined jaws help grip securely• Set contains: 8” universal plier, 6” long nose plier, 6” diago-

nal cutter plier, 10” locking plier and 8” adjustable wrench

FMCFHT0102

Folding Stainless Steel Utility Knife• Lightweight stainless steel utility knife with interchangeable blades• Stainless steel blade holder • Back lock for folding• Quick exchange blade mechanism• Dimensions: Overall length 6.41”; Closed length 3.93”

FMCFHT0118

5 Piece Multi-Tool Gift Set• Includes: 9-in-1 multi-tool, 9-in-1 mini multi-tool, utility knife with storage/carrying pouch, 2-LED flashlight and key chain• Durable steel, lightweight tools• Ergonomic aluminum handles• Multi-tools are stainless steel• Utility knife has a stainless steel blade with a quick exchange

mechanism and a back lock for folding

FMCFHT0121

31 Piece Screwdriver Set• Ergonomic soft grip Ford handle for gripping power• S2 steel harder than CR-V steel• Handle holes to hang for storage• 3 slotted, 3 Phillips, 1 S2 bits driver, 13 (1”) S2 bits, 9

(1/4”) SAE CR-V sockets, 1” ADP and 4” magnetic dish

FMCFHTC0004S2

Rechargeable Spotlight 10W, 480 Lumen• 1 LED rechargeable spotlight 480 Lumens with

durable ABS housing and long lasting LED• Multiple lighting modes: High/Low/SOS mode• Waterproof and floats• Rechargeable 3.7V 2200mAh Lithium-Ion Battery with

charging and discharging protection• Charge time: 40-60 minutes• Run time: 1 hour on high mode and 3 hours on low mode• AC/DC adapter and 12V car charger included

FMCFL1001

Rechargeable 16 LED Worklight/Flashlight• 16 LED worklight 50 Lumens/1 LED flashlight 25 Lumens,

ABS housing with rubber cover and long lasting LED’s• Strong magnet in the bottom with a hanging hook at the

top which can be turned down when not in use• Multiple lighting modes: High / Low / SOS• Rechargeable 3.7V 1300mAh Lithium-Ion Battery

with charging and discharging protection• Charge time: 6 hours

Run time: 4 hrs worklight / 10 hours flashlight• AC/DC adapter and 12V car charger

FMCFL1002

250 Lumens, “C” Battery Operated• Requires 3 “C” batteries• Run time: 8 hours

FMCFL1003

250 Lumens, AAA Battery Operated• Requires 3 “AAA” batteries• Run time: 2 hours

FMCFL1004

65 Lumen, Battery Operated• Requires 1 “AA” battery• Run time: 1-1/2 hours• Wrist strap provided

FMCFL1006

Rechargeable 3W LED Spotlight• 1 LED rechargeable spotlight 120 Lumens 3 watt,

impact resistant ABS housing, and long lasting LED• Hanging hook at the top which can be turned

down when not in use• Rechargeable 3.7V 1300mAh Lithium-Ion battery• Charge time: 6 hours Run time: 2 hrs High Mode / 4 hrs Low Mode• AC/DC adapter and 12V car charger• Wrist strap provided

FMCFL1010

FMCFL1012 - 120 Lumens• Multiple lighting modes: High/Low/Flash

FMCFL1014 - 250 Lumens• Multiple lighting modes: High/Low/Flash/SOS

10W Aluminum Worklight, 700 Lumens• Aluminum body, 1 LED worklight, and 700 Lumens• Long lasting LED with 5500K light color• 10 watt, 18/3 AWG SJTW, 4.92 ft. cord• Water, steam, and dust resistant• On/off switch

FMCFWL1000

FMCFWL1001 - 20W, 1400 Lumens

600 Lumen Rechargeable Aluminum Worklight, 10W• Aluminum body, 1 LED, rechargeable worklight 600 Lumens• Long lasting LED with 5500K light color• Lumens adjustment with 3 levels of brightness

(maximum 10 watts) and SOS function• Charging time: 3-1/2 hours;

Work time: 3 hours• Cigarette lighter charger and

indoor adapter included• Indoor/Outdoor approved

FMCFWL1002

Worklight With Fast Clamp and Stand, 2 x 20W, 2 x 1400 Lumen• Aluminum body and stand, 1 LED dual head integrated worklight 2 x 1400 Lumens• Long lasting LED with 5500K light color with impact resistance glass lens• 2 x 20 watt, 2.5M H05RN-F 3G 1.00mm2; 40W 2800 Lumens• H-stand and telescopic tripod that extends up to 49” with fast clamp• Weather-protected sealed switches, indoor/outdoor approved

FMCFWL1003

12 Piece Combination Wrench Sets• Chrome vanadium• Mirror smooth polished steel wrenches wipe clean fast• Heavy duty plastic elliptical panel storage case that can

be used for carrying or hanging wrenches• Available in fractional and metric sizes

Part No. Description Sizes SPECIALFMCFHTEI078EPIN 12 Piece Fractional Elliptical Panel Combination Wrench Set 1/4” to 1”

FMCFHTEI078EPMM 12 Piece Metric Elliptical Panel Combination Wrench Set 6mm to 18mm

HAND TOOLS

2 x 1400 Lumens

Exte

nds

up t

o 49

”

Folding Knife and 9-in-1 Multitool

Good Addition to ANY Toolbox

NEW PRODUCTS

LIGHTING

160 Lumens, AA Battery Operated• Requires 2 “AA” batteries• Run time: 1-1/2 hours

FMCFL1005

Ford Tools

9-In-1 Multi-Tool• Ergonomic aluminum handle• 420 Stainless steel blade• Durable steel• Tool includes: plier, saw, saw for wood, flat screwdriver, Phillips

screwdriver, knife blade, file, can opener and bottle opener

FMCFDK4

4 Piece Snap Ring Pliers• Dipping handle for comfort• Made of carbon steel, lightweight and easy to use• Set contains: four 7” snap ring pliers• Set includes multiple styles for a wide range of uses and applications

FMCFHT0112DH

18 Piece Screwdriver Set• S2 steel harder than CR-V steel• Real magnetic tips• Handle holes to hang for storage• Set contains: 4 slotted 5/16” x 6”, 1/4” x 4”, 3/16” x 3”, 1/4” x 1-1/2”; 4

phillips #3 x 6”, #2 x 4”, #1 x 3, #2 x 1-1/2”; 10 2” precisions 6 Torx T5, T6, T7, T8, T9, T10, 2 slotted 3/32” 1/8”, 2 phillips #0, #00

FMCFHTC0048S2

34 Piece Ratchet Screwdriver Set, SAE and Metric• Durable and impact resistant with S2 shock resistant steel bits• Twist reverse and ratchet lock knob mechanism• Extended shaft, works well in hard-to-reach areas• Set contains: 1 ratchet screwdriver, 1 S2 bit adapter, 15 S2 bits, 5 holders,

6-1/4” metric sockets (CR-V), 6-1/4” socket SAE (CR-V)

FMCFHTC0051S2

45 Piece Ratchet Screwdriver Set• Impact resistant with S2 shock resistant steel bits providing

strength and durability• Twist reverse and ratchet lock wheel mechanism• Half-extended shaft and easy bit changing• Set contains: 1 ratchet screwdriver, 1 S2 bit adapter (1”), 29 S2

(1”) bits - 1/8”, 5/32”, 3/16” (2), 1/4” (2), PH0, PH1 (2), PH2 (2), PH3 - PZ2, T10 - T30, S0 - S3, H1/8” - H1/4”, 5 S2 (2”) 3/16”, 1/4”, PH1 - PH3, 9 (1/4”) SAE socket CR-V 5/32” - 1/2”

FMCFHTC0056S2

5 Piece Plier Set, 7” And 8” Assorted• Set contains: 7” diagonal, 8” long nose, 8” slip joint,

8” universal and 8” groove joint• Ergonomic soft grip Ford handle for gripping power• Made of carbon steel, lightweight, and easy to use• Machined jaws help grip securely

FMCFHT0103

Rechargeable Aluminum LED Flashlights• Aluminum housing, CREE XPE 1 LED rechargeable flashlight • Long lasting LED• Rechargeable 18650 Lithium-Ion

with a run time of 120 minutes• Wrist strap, battery, and charger included

Aluminum LED Flashlight, • Aluminum housing, CREE XPG 1 LED flashlight• Long lasting LED• Multiple lighting modes: High/Low/Flash

NEW

NEW

NEW

NEW

NEW

$22.95

$26.95

$42.95

$65.95

$92.95

$12.95

$12.95

$11.95

$26.95

$21.95

$36.95

$162.95

$75.95

$26.95

$20.95

$14.95

$16.95

$22.95

$30.95

$9.95

$53.95

$30.95$24.95

$15.95

$23.95

$35.95

$25.95

$10.91

$23.95

Q3 Mechanic's Marketplace 2015 Canada

Documents