PWB-200 Series Plasma/Flat Panel Display Wall Box Metal Products Group PWB-200 Series The PWB-200 series balance quality and cost, bringing fully featured wall boxes to you at an affordable price. We have kept the cost low while delivering the quality and ease of installation you have always experienced with FSR products. All models are ready to install and include a two part cover with mounting screws in either black or white, back box, screws for wood or steel stud mounting, grounding screws, tie wraps, and a rubber grommet. One of the single gang knockouts has a 1”x2” oblong internal knockout and can be used with the supplied grommet. There are three models designed to fit the individual appli- cation requirements: The PWB-200 is approximately 7”x7”x4” with two single gang knockouts, and one IPS knockout to mount up to six single IPS plates. The unit is designed to fit 2”x4” stud walls. At 7”x7”x3” the PWB-203 is specifically sized for installa- tion in 2”x3” stud walls. A steel duplex cover plate is includ- ed for convenience to ensure proper fit in the shallow back box. There are two single gang knockouts, and one IPS knockout to mount up to six single IPS plates. The largest and highest capacity model is the PWB-250. This unit is approximately 14.5”x7”x4” and has three single knockouts and one IPS knockout to mount up to six single IPS plates. In addition, a removeable passthrough enclo- sure provides an additional single gang knockout and can be used to isolate cables that the installer may need to pass through the backbox. The PWB-2X0-AVBB is an optional AV back box to enclose the exterior of the IPS knockout area. The PWB-20X-MNT is a set of adjustable bracket ears that allow the installer to mount PWB-200 or PWB-203 at differ- ent locations between the studs. The PWB-xxx-SLD abandonment covers, are available in black or white. They are used in place of the finish covers to protect the units during construction or when they are used as closed utility boxes not requiring external cable access. DESCRIPTION DESCRIPTION ACCESSORIES ACCESSORIES FSR Inc. 244 Bergen Boulevard, Woodland Park, NJ 07424 Phone: 973.785.4347 · Fax: 973.785.4207 Web: www.fsrinc.com · E-mail: [email protected]Order Desk: 1-800-332-FSR1 LIT1352 FEATURES FEATURES • Rugged 14 gauge steel back box with 1 / 16” front cover • Compatible with FSR’s IPS inserts • Can be installed in new or old work (mounting adapters included) • AC and low voltage back box included • Connectors are hidden behind an attractive cover • Multiple knockouts in a variety of sizes • UL listed AC back box provided APPLICATIONS APPLICATIONS • Anywhere a video display is wall mounted! • Digital Signage • Electronic Billboards • Conference Centers • Museums • Schools • General Meeting Facilities • Airports • Arenas PWB-250 PWB-200 PWB-203 PWB-250 PWB-200/203 CONFORMS TO UL STD 514A CERTIFIED TO CSA STD C22.2 NO. 18.1-04 The models above are shown with IPS plates and accessories that are not included.
4
Embed
PWB-200 Series Plasma/Flat Panel - AV-iQ | Audio … lit1352 pwb-20… · PWB-200 Series Plasma/Flat Panel ... IPS Audio / Video Inserts S e r i ... H D MI SS-USBB SS-LC SS-SWMOM
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PWB-200 SeriesPlasma/Flat Panel Display Wall Box Metal Products Group P
WB
-20
0 S
eri
es
The PWB-200 series balance quality and cost, bringing fullyfeatured wall boxes to you at an affordable price. We havekept the cost low while delivering the quality and ease ofinstallation you have always experienced with FSR products.
All models are ready to install and include a two part coverwith mounting screws in either black or white, back box,screws for wood or steel stud mounting, grounding screws,tie wraps, and a rubber grommet. One of the single gangknockouts has a 1”x2” oblong internal knockout and can beused with the supplied grommet.
There are three models designed to fit the individual appli-cation requirements:
The PWB-200 is approximately 7”x7”x4” with two singlegang knockouts, and one IPS knockout to mount up to sixsingle IPS plates. The unit is designed to fit 2”x4” stud walls.
At 7”x7”x3” the PWB-203 is specifically sized for installa-tion in 2”x3” stud walls. A steel duplex cover plate is includ-ed for convenience to ensure proper fit in the shallow backbox. There are two single gang knockouts, and one IPSknockout to mount up to six single IPS plates.
The largest and highest capacity model is the PWB-250.This unit is approximately 14.5”x7”x4” and has three singleknockouts and one IPS knockout to mount up to six singleIPS plates. In addition, a removeable passthrough enclo-sure provides an additional single gang knockout and canbe used to isolate cables that the installer may need to passthrough the backbox.
The PWB-2X0-AVBB is an optional AV back box to enclosethe exterior of the IPS knockout area.
The PWB-20X-MNT is a set of adjustable bracket ears thatallow the installer to mount PWB-200 or PWB-203 at differ-ent locations between the studs.
The PWB-xxx-SLD abandonment covers, are available inblack or white. They are used in place of the finish covers toprotect the units during construction or when they are usedas closed utility boxes not requiring external cable access.
• Rugged 14 gauge steel back box with1⁄16” front cover• Compatible with FSR’s IPS inserts• Can be installed in new or old work(mounting adapters included)• AC and low voltage back box included• Connectors are hidden behind an attractive cover• Multiple knockouts in a variety of sizes• UL listed AC back box provided
APPLICATIONSAPPLICATIONS
• Anywhere a video display is wall mounted! • Digital Signage • Electronic Billboards • Conference Centers • Museums• Schools • General Meeting Facilities • Airports • Arenas
PWB-250
PWB-200 PWB-203 PWB-250PWB-200/203
CONFORMS TO UL STD 514ACERTIFIED TO CSA STD C22.2 NO. 18.1-04
The models above are shown with IPS plates and accessories that are not included.
PW
B-2
00
Seri
es
PWB-200 ACCESSORIESPWB-200 ACCESSORIES
IPS Blank Inserts
IPS-B011QPass Thru .69" x 1.69"
ID Rubber Bushing
IPS-B020DPass Thru 2x .312"
ID Bushings
IPS-B000SSingle Space Blank
IPS-B000DDouble Space Blank
IPS-B010DPass Thru .812"
ID Bushing
IPS-B000QFour Space Blank
IPS-B030TPass Thru 2x .312" ID &
.812" ID Bushings
IPS Audio / Video Inserts
IPS Video Inserts
IPS Audio Inserts
IPS-AV922SRCA (YEL) to Solder Cup
w/3.5mm St. to Solder Cup IPS-AV923D9-Pin D Female toFemale Bulkhead
Most items above are available inwhite, ivory or black to match thedecor. We are always adding to our IPS and SS line. Please visit our website or contact sales for detailed information.
PW
B-2
00
Seri
es
PWB-200 SERIES DIMENSIONSPWB-200 SERIES DIMENSIONS
PWB-250 SERIES DIMENSIONSPWB-250 SERIES DIMENSIONS
OTHER FSR PRODUCT OFFERINGSOTHER FSR PRODUCT OFFERINGS
The Intelligent Plate Solution (IPS) line encompasses a wide varietyof interconnect solutions that satisfy any AV interface application.Create unlimited combinations of connector inserts with this diverseassortment of sleek wall plate and under table mounting styles.Customize your table, wall or floor box with our IPS plates.
FSR addresses the rising issue of network security with the newseries of locking wall boxes. With 18 different models, everythingfrom recessed to surface mounts are available for new or existingconstruction. Store any wall plate or connections safely and securely.
IPS-WP2Q-WHT (populated)
WB-PR26 (populated)MADE INTHE USA
Specifications are subject tochange without notice.