PW & PWe - Poclain · PDF file4 Hydraulic Pumps PW & PWe | High Performance Hydraulic Pumps PW & PWe | High Performance 5 Quality Power density 3850 rpm 500 bar B y...

PW & PWeHydraulic Pumps

2 Hydraulic Pumps PW & PWe | High Performance Hydraulic Pumps PW & PWe | High Performance 3

The PW & PWe range Used in hydrostatic transmis-sion systems composed of

motors, valves, and electronic controls, the PW & PWe range offers you the benefit of over 50 years of expertise gained by Poclain Hydraulics in the field of hydrostatic transmissions. The performance and added value they provide will help make your machines a commercial success.

The upcoming anti-pollu-tion standards impose new

constraints which must be taken into consideration. End users look for reliable, precise, high performance machines that mi-nimize energy expenditure and maximize comfort.

Designed with compactness, energy efficiency and high

power density in mind, the “Heavy Duty” PW & PWe pump range meets these require-ments.

Productivity, Comfort and Energy Efficiency

PWe 085 - 096PWe 085 - 096

PW 085 - 096PW 085 - 096


Quality

Power density

3850 rpm

500 bar

By making the most of the ins-talled components, you can

optimize your machines’ perfor-mance. The PW & PWe range allows maximum pressure levels and unrivalled levels of speed. In-creasing the accessible pressure and speed in this way improves your machines’ productivity, for greater customer satisfaction.

Reliability and durability are a “must” for your machines.

Drawing on 50 years of exper-tise in hydraulics, the PW & PWe range is the culmination of several years of design, deve-lopment and validation. It thus reinforces the brand image of your machines and contri-butes to customer satisfaction.

Energy efficiency

Precision

92% of efficiency

Your machines’ ecological and economic impacts are

a concern for you and your end users. The PW & PWe range has been designed with the aim of optimising all of these compo-nents. The result is a high level of operating efficiency which opti-mizes fuel consumption, a fea-ture which will be popular with your customers.

Power is nothing without precision. The PW & PWe

range has an exclusive electro-nic control unit, making it pre-cise and dynamic. Coupled with a dedicated electronic control system, your machines meet present and future requirements in terms of comfort, safety and reduction in fuel consumption.

SA Control


Compactness

264 mm(Axial length)

The technical solutions requi-red by the new anti-pollution

standards reduce the available space in diesel engine compart-ments. The PW & PWe range meets these new integration constraints perfectly by offering the best axial compactness on the market.

Plug & DriveTM byThe PWe is designed to meet

all your requirements, point by point. The on-board electro-nic control unit gives you access to a high level of safety for your control systems.

The control software, pre-ins-talled at the factory, contains

all the necessary functions to meet your needs in the area of performance, comfort and safety. Its communication capa-cities make it easy to install and it integrates seamlessly with the rest of your machinery.

Reduced development

cost

Reduced development

time

HIGH QUALITYHIGH POWERHIGH TECHNOLOGY HIGH VALUE ADDED

PW & PWe Hydraulic Pump


Level PL-d

Safety & comfort

Transmission features

The PW & PWe range gives you access to essential dri-

ving features (automotive mode and non-automotive mode) and safety features (Safety start ma-nagement, Operator presence detection...). The comfort fea-tures (Speed control, anti-stall...) improve productivity. Finally, the protection features (over temperature, over pressure, over power) will ensure the longevity of the hydrostatic transmission.

Operating safety

Any Off-Road machine sold on the market of the European

Community must comply with Machinery Directive 2006/42/EC and related standards such as ISO 13849-1. The PW & PWe range fitted with our electronic system allows you to reach a high level of safety for your control systems. Compatible with Per-formance Level d (Safety Level PL-d according to ISO 13849-1), it guarantees full compliance with the standards in force.

On-board electronic control unit

Standard software features

2 CAN bus

The software package pre-ins-talled on every PWe on-board

electronic control unit provides access to a set of features desi-gned to enhance the comfort and safety of the machine and individuals. They are activated on a strictly “as-needed” basis, thus removing the need for any addi-tional, costly software develop-ment. This helps you reduce your development time and lets you control costs.

The PWe’s on-board electronic control unit can withstand

the harshest environments, in-cluding proximity to the internal combustion engine. The IP69K type electrical connections and the factory-installed harness are tested at the end of the assem-bly line before delivery. The 2 integrated CAN bus allow you to share information with the rest of the machine (internal combus-tion engine, displays, hydraulic components...), configure and diagnose your machine.

Predefined softwares

Protection OfferDriving

OfferStandard

Offer

Basic functionalities

Standard Offer +

Enhanced driving

functionalities

Driving Offer+

Hydrostatic transmission protections

functionalities


Tech

nica

l Cha

ract

eris

tics

Tech

nica

l Cha

ract

eris

tics

Controls

PW / PWe 085 PW / PWe 096 PW / PWe 115 PW / PWe 130 PW / PWe 145 PW / PWe 164

Electronic 12V +feedback sensor and control pressure cut-off

- - - -

Electronic 24V + feedback sensor and control pressure cut-off

- - - -

DisplacementPW / PWe 085 PW / PWe 096 PW / PWe 115 PW / PWe 130 PW / PWe 145 PW / PWe 164

cm3/rev [in3/rev] 85,2 [5.20] 96,4 [5.88] - - - -

Auxiliary mounting pad


SAE-A - z = 9 - 16/32 D.P - - - -

SAE-B - z = 13 - 16/32 D.P. - - - -

SAE-BB - z = 15 - 16/32 D.P. - - - -

SAE-C - z = 14 - 12/24 D.P. - - - -

SAE-C - z = 21 - 16/32 D.P. - - - -

SpeedPW / PWe 085 PW / PWe 096 PW / PWe 115 PW / PWe 130 PW / PWe 145 PW / PWe 164

Continuous max. speed (rpm) 3 650 3 650 - - - -

Intermittent max. speed (rpm) 3 850 3 850 - - - -

PressurePW / PWe 085 PW / PWe 096 PW / PWe 115 PW / PWe 130 PW / PWe 145 PW / PWe 164

Continuous max. pressure (bar [PSI]) 450 [6527] 400 [5802] - - - -

Intermittent max. pressure (bar [PSI]) 500 [7252] 450 [6527] - - - -

Mounting flange & Shaft


SAE C Splined shaft

z=21 - 16/32 D.P - - - -

z=23 - 16/32 D.P - - - -

z=13 - 8/16 D.P - - - -

z=14 - 12/24 D.P - - - -

Main options


Speed sensor - - - -

Temperature sensor - - - -

Pressure sensor - - - -

2 bolts mounting flange - - - -

Flushing block - - - -

Integrated filter with pollution indicator

- - - -

WeightPW / PWe 085 PW / PWe 096 PW / PWe 115 PW / PWe 130 PW / PWe 145 PW / PWe 164

kg [lb] 71 [157] 71 [157] - - - -

Surpassing the individual performances of each componentWe combine our components within our hydrostatic transmission systems. Our combined

expertise in hydraulics, electronics and mechanics, along with our understanding of your applications, enables us to design, manufacture and offer you high added value solutions that meet present and future market expectations.

Minimising the environmental footprintThe intelligence of our systems, namely our experience and competence in electronic control

systems, enables the constant use at the optimum operating point of your machine. This guarantees the best performance whilst minimising fuel consumption.

Speeding up the integration of complex technologyWe place the full range of our know-how at your disposal through our offer of hydrostatic

transmission systems. You minimise your development costs and accelerate the time to market whilst improving the performance of your machines.

Optimising performanceSupplying exactly the right power required whilst maximising reliability, comfort, personal

safety and the safety of equipment: this is our definition of optimising performance, accessible to you thanks to our systems.

Pushing back the boundaries of innovationIn order to establish your competitive advantage on your markets, you are constantly seeking

to extend the range of your machines. The use of electronic transmission control helps to access a limitless panel of comfort, safety and energy-saving functions.

We are above all a partner you can rely on to accom-

pany you through the design and sizing of your hydrostatic transmission. We supply the complete transmission (from pumps to motors, including valves and electronic control) and can also test your machine on our proving ground, insuring you receive a reliable, long-term hydraulic solution.

Poclain Hydraulics specialises in the design, manufacture

and marketing of hydrostatic transmissions.

Our success is based on a wide range of products,

our high quality standards and a strong culture of innovation.

Poclain Hydraulics brings 50 years of experience to Agri-

cultural, Construction, Material Handling and On Road markets to name a few. We are specia-lized in the development and global production of high torque ground drives and related com-ponents.

www.poclain-hydraulics.com

PW & PWe - Poclain · PDF file4 Hydraulic Pumps PW & PWe | High Performance Hydraulic Pumps PW & PWe | High Performance 5 Quality Power density 3850 rpm 500 bar B y...

Documents