Bid Deadline: April 26, 2016 at 2:00pm 2323 North Broadway, Suite 109, Santa Ana CA 92706 •Phone 714.480.7370 •Fax 714.796.3907 Purchase of Lincoln Electric System 5 – 100iC/12 Robot Arm & Fanuc Arcmate 100iC/12 Robot Arm and Miscellaneous Accessories (or equal) Bid #1285 Community College District Purchasing Services
30
Embed
Purchase of Lincoln Electric System 5 100iC/12 Robot Arm ......Bid #1285 – Purchase of Lincoln Electric System 5 – 100iC/12 Robot Arm & Fanuc Arcmate 100iC/12 Robot Arm and Miscellaneous
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Bid Deadline:
April 26, 2016 at 2:00pm
2323 North Broadway, Suite 109, Santa Ana CA 92706 •Phone 714.480.7370 •Fax 714.796.3907
Bid Dea
Purchase of Lincoln Electric
System 5 – 100iC/12 Robot
Arm & Fanuc Arcmate
100iC/12 Robot Arm and
Miscellaneous Accessories (or
equal)
Bid #1285
Community College District
Purchasing Services
Bid #1285 – Purchase of Lincoln Electric System 5 – 100iC/12 Robot Arm & Fanuc Arcmate
100iC/12 Robot Arm and Miscellaneous Accessories (or equal)
Table of Contents
No. of Pages
Notice Calling for Bids ...................................................................................................................... 1
Information for Bidders ..................................................................................................................... 4
Business Enterprises .......................................................................................................................... 5
Statement of Compliance ................................................................................................................... 1
General Conditions ............................................................................................................................ 8
*Questionnaire……………………………………………………………………………………….1
*References…………………………………………………………………………………………..2
*Bid Form .......................................................................................................................................... .4
*Signature Page………………………………………………………………………………………1
*IF THE FOLLOWING ITEMS ARE NOT RETURNED AT THE TIME OF THE BID OPENING,
THE BIDDER WILL BE DECLARED NON-RESPONSIVE.
+ITEMS WHICH SUCCESSFUL BIDDER MUST SUBMIT AFTER THE AWARD.
Notice Calling for Bids
Page 1
RANCHO SANTIAGO COMMUNITY COLLEGE DISTRICT
Santa Ana, CA 92706
NOTICE CALLING FOR BIDS
The Board of Trustees of the Rancho Santiago Community College District is advertising for bids
to be received up to April 26, 2016 at 2:00pm in the Rancho Santiago Community College District,
Purchasing Department, 2323 N Broadway – Room 109, Santa Ana, CA 92706.
Bid #1284 – Purchase of Vertical Mill & Tooling Lathe
Bid #1285 – Purchase of Lincoln Electric System 5 – 100iC/12 Robot Arm & Fanuc Arcmate
100iC/12 Robot Arm and Miscellaneous Accessories (or equal)
Bid #1286 – Purchase of Laser Star Technologies Laser Welding Workstations &
Accessories (or equal)
Bid documents are available at www.rsccd.edu/bidopportunities. Bidders are responsible to
regularly check the District’s website for addendums. For further information, contact Marsha
Carmichael, at the above address, phone (714) 480-7379 or email [email protected].
THIS IS TO CERTIFY that I have read the General Conditions, Information for Bidders and
Special Conditions of the Contract Documents of the Rancho Santiago Community College
District and will comply therewith. It is further understood that where the term “Bidder” or
“Contractor” and “Contractor Documents” or “Projector Documents” appears throughout the
Contract Documents are hereby interchangeable.
_________________________________________
Name of Firm
By ______________________________________
Signature of Authorized Official
_________________________________________
Date
January, 2012 Non-Collusion Declaration Page 1
NON-COLLUSION DECLARATION TO BE EXECUTED BY
BIDDER AND SUBMITTED WITH BID
The undersigned declares:
I am the ___________________ of ________________________, the party making the foregoing
bid.
The bid is not made in the interest of, or on behalf of, any undisclosed person, partnership,
company, association, organization, or corporation. The bid is genuine and not collusive or sham.
The bidder has not directly or indirectly induced or solicited any other bidder to put in a false or
sham bid. The bidder has not directly or indirectly colluded, conspired, connived, or agreed with
any bidder or anyone else to put in a sham bid, or to refrain from bidding. The bidder has not in
any manner, directly or indirectly, sought by agreement, communication, or conference with
anyone to fix the bid price of the bidder or any other bidder, or to fix any overhead, profit, or cost
element of the bid price, or of that of any other bidder. All statements contained in the bid are true.
The bidder has not, directly or indirectly, submitted his or her bid price or any breakdown thereof,
or the contents thereof, or divulged information or data relative thereto, to any corporation,
partnership, company, association, organization, bid depository, or to any member or agent
thereof, to effectuate a collusive or sham bid, and has not paid, and will not pay, any person or
entity for such purpose.
Any person executing this declaration on behalf of a bidder that is a corporation, partnership, joint
venture, limited liability company, limited liability partnership, or any other entity, hereby
represents that he or she has full power to execute, and does execute, this declaration on behalf of
the bidder.
I declare under penalty of perjury under the laws of the State of California that the foregoing is
true and correct and that this declaration is executed on ____________[date], at
____________[city], _____________[state].
_________________________________
Signature
_________________________________
Print Name
April, 2014 District Insurance Requirements Page 1
DISTRICT INSURANCE REQUIREMENTS
It is required that every vendor and contractor working for the Rancho Santiago Community
College District meet the following insurance requirements. The vendor and contractor will be
required to file with the District certificates of such insurance and endorsements. Failure to furnish
such evidence will be considered default of the vendor and contractor.
The Rancho Santiago Community College District shall be named as an additional insured on the
Commercial General Liability and Comprehensive Automobile Liability policies, documented by
a written endorsement, and the policy must carry a 30-day cancellation clause.
Prior to commencing work, and continuing during the life of the project, vendor and contractor
shall take out, and require all subcontractors, if any, to take out and maintain: I. Commercial General Liability Each vendor and contractor shall supply a Certificate of Insurance showing evidence of
Commercial General Liability coverage with a limit of at least $1,000,000 combined single limit
per occurrence. The insurance shall be primary and non-contributory.
II. Workers’ Compensation and Employers Liability
Each vendor and contractor shall supply a Certificate of Insurance showing Workers’
Compensation and Employers Liability. The Employers Liability limits shall be at least
$1,000,000 each item. The vendor/contractor shall provide a waiver of subrogation.
III. Automotive Liability Each vendor and contractor shall supply a Certificate of Insurance showing Commercial
Automobile liability coverage in an amount no less than $1,000,000 combined single limit for
all owned, non-owned and hired vehicles. Commercial bus vendors must show evidence of limits
of at least $5,000.000.
IV. Umbrella or Excess Liability If the vendor’s and contractor’s primary or underlying limits of coverage do not meet the
requirements outlined above, additional limits of coverage may be provided by an umbrella
policy or an excess liability policy. Endorsements to the umbrella or excess policy which limit or
exclude coverage must be attached to the certificate of insurance.
V. Additional Requirements The insurers for all coverage lines shall have a minimum A.M. Best’s rating of A, VII and be
admitted in California. This can be amended by separate agreement by RSCCD.
May, 2002 Workers’ Compensation Certificate Page 1
WORKERS' COMPENSATION CERTIFICATE
Labor Code Section 3700.
"Every employer except the state shall secure the payment of compensation in one or more of
the following ways:
(a) By being insured against liability to pay compensation in one or more insurers duly
authorized to write compensation insurance in this state.
(b) By securing from the Director of Industrial Relations a certificate of consent to self-
insure either as an individual employer or as one employer in a group of employers, which may be
given upon furnishing proof satisfactory to the Director of Industrial Relations of ability to self-insure
and to pay any compensation that may become due to his or her employees.
(c) For any county, city, city and county, municipal corporation, public district, public
agency or any political subdivision of the state, including each member of a pooling arrangement
under a joint exercise of powers agreement (but not the state itself), by securing from the Director of
Industrial Relations a certificate of consent to self-insure against workers' compensation claims, which
certificate may be given upon furnishing proof satisfactory to the director of ability to administer
workers' compensation claims properly, and to pay workers' compensation claims that may become
due to its employees. On or before March 31, 1979, a political subdivision of the state which, on
December 31, 1978, was uninsured for its liability to pay compensation, shall file a properly completed
and executed application for a certificate of consent to self-insure against workers' compensation
claims. The certificate shall be issued and be subject to the provisions of Section 3702."
I am aware of the provisions of Labor Code Section 3700 which require every employer to be
insured against liability for workers' compensation or to undertake self-insurance in accordance with
the provisions of that code, and I will comply with such provisions before commencing the
performance of the work of this contract.
____________________________________
Name of the Contractor
By: _________________________________
Signature
____________________________________
Print Name
____________________________________
Title
____________________________________
Date
(In accordance with Article 5 [commencing at Section 1860], Chapter 1, Part 7, Division 2 of the Labor
Code, the above certificate must be signed and filed with the awarding body prior to performing any
work under the contract.)
May, 2002 Drug-Free Workplace Certification Page 1
DRUG-FREE WORKPLACE CERTIFICATION
This Drug-Free Workplace Certification is required pursuant to Government Code Sections 8350,
et seq., the Drug-Free Workplace Act of 1990. The Drug-Free Workplace Act of 1990 requires
that every person or organization awarded a contract for the procurement of any property or
services from any State agency must certify that it will provide a drug-free workplace by doing
certain specified acts. In addition, the Act provides that each contract awarded by a State agency
may be subject to suspension of payments or termination of the contract, and the contractor may
be subject to debarment from future contracting, if the state agency determines that specified acts
have occurred.
Pursuant to Government Code Section 8355, every person or organization awarded a contract from
a State agency shall certify that it will provide a drug-free workplace by doing all of the following:
a) publishing a statement notifying employees that the unlawful manufacture,
distribution, dispensation, possession or use of a controlled substance is prohibited in the person's
or organization's workplace and specifying actions which will be taken against employees for
violations of the prohibition;
b) establishing a drug-free awareness program to inform employees about all of the
following:
1) the dangers of drug abuse in the workplace;
2) the person's or organization's policy of maintaining a drug-free workplace;
3) the availability of drug counseling, rehabilitation and employee-assistance
programs;
4) the penalties that may be imposed upon employees for drug abuse
violations;
c) requiring that each employee engaged in the performance of the contract be given
a copy of the statement required by subdivision (a) and that, as a condition of employment on the
contract, the employee agrees to abide by the terms of the statement.
I, the undersigned, agree to fulfill the terms and requirements of Government Code Section 8355
listed above and will publish a statement notifying employees concerning (a) the prohibition of
controlled substance at the workplace, (b) establishing a drug-free awareness program, and (c)
requiring that each employee engaged in the performance of the contract be given a copy of the
statement required by Section 8355(a) and requiring that the employee agree to abide by the terms
of that statement.
I also understand that if the DISTRICT determines that I have either (a) made a false certification
herein, or (b) violated this certification by failing to carry out the requirements of Section 8355,
May, 2002 Drug-Free Workplace Certification Page 2
that the contract awarded herein is subject to suspension of payments, termination, or both. I further
understand that, should I violate the terms of the Drug-Free Workplace Act of 1990, I may be
subject to debarment in accordance with the requirements of Section 8350, et seq.
I acknowledge that I am aware of the provisions of Government Code Section 8350, et seq. and
hereby certify that I will adhere to the requirements of the Drug-Free Workplace Act of 1990.
____________________________________
Name of Contractor
____________________________________
Signature
____________________________________
Print Name
____________________________________
Title
____________________________________
Date
General Conditions Page 1
RANCHO SANTIAGO COMMUNITY COLLEGE DISTRICT
Santa Ana College
Rancho Santiago Community College District (“District”) is home to two colleges (Santa Ana
College & Santiago Canyon College), two continuing education centers (Orange Education Center &
Centennial Education Center) and several other facilities (the Digital Media Center, the Orange
County Regional Fire Training Center, the Orange County Sheriff’s Regional Training Academy &
the District Operations Center) throughout the Central Orange County area. In addition, the District
presents convenient community education courses in many other locations in cooperation with its
education and community partners.
Santa Ana College (“SAC”), located at the corner of W. 17th St. and Bristol in Santa Ana is on about
65 acres. The college turned 100 years old in 2015 and currently serves 29,318 credit and non-credit
students per semester. The mission of Santa Ana College is to be a leader and partner in meeting the
technological and workforce development needs of a diverse community. The college provides access
and equity in a dynamic learning environment that prepares students for transfers and careers in a
global community.
Ranked as one of the nation’s top two-year colleges awarding associate degrees to Latino and Asian
students, Santa Ana College is also recognized throughout the state for its comprehensive workforce
training programs for nurses, firefighters, law enforcement and other medical personnel.
GENERAL CONDITIONS
1.0 Scope of Bid
The SAC - Welding Technology Department’s mission is to provide students with high quality
welding instruction, using state-of-the art welding technology and equipment that meets
industry needs. The District is seeking bids from responsive and responsible bidders who can
provide, deliver and install Lincoln Electric System 5 – 100iC/12 Robot Arm & Fanuc Arcmate
100iC/12 Robot Arm and Miscellaneous Accessories (or equal). This equipment will allow the
welding technology program to continue the comprehensive instructor training program
promoting the development of the single, common curriculum. The single curriculum allows
students to become proficient with advanced technologies for learned coursework and
equipment. The existing training and curriculum is based on one Lincoln Electric System 5
Robotic Welding System and one Lincoln Electric Robotic Educational Cell. This new
equipment will be installed at Santa Ana College, 1530 W. 17th St. – Bldg T-107, Santa Ana,
CA 92706.
1.1 The District intends to award the bid to a single bidder who is able to provide all
provisions of the specifications in this bid
2.0 Due Date/Time
2.1 Sealed bids are due April 26, 2016 at 2:00pm and to be returned in a sealed envelope,
clearly labeled with the name of the bidder, bid name and number, and addressed to
Rancho Santiago Community College District, Purchasing Department, 2323 N.
General Conditions Page 2
Broadway – Room 109, Santa Ana, CA 92706. Bids will not be accepted after the
date and time stated above. The District is not responsible for late or misdirected
bids. Bids received after the date and time will be considered non-responsive and
returned unopened.
2.2 Bids shall be good for one hundred twenty (120) calendar days from the date of the bid
opening.
3.0 Bid Form and Enclosure Instructions
3.1 Place your bid amounts ONLY on the form provided. Provide information and answer
all questions in sections where required. Fill in all blanks. Any bid that deviates from
the format specified herein may, at the District’s option, be rejected.
3.2 Bidder shall respond to the Warranty Questionnaire which will become part of the bid.
Failure to do so may deem your bid non-responsive.
3.3 The Signature Page must be signed and returned, along with the following documents:
- Statement of Compliance
- Non-Collusion Declaration
- Questionnaire
- References
- Bid Form
- Signature Page (unsigned bids shall be deemed non-responsive)
3.4 After the bid award has been approved by the District’s Board of Trustees, the
successful bidder shall execute and return to the District within five (5) business days
after the notification of the award, the following documents:
- Drug-Free Workplace Certification
- Certificate of Workers’ Compensation Insurance
- Certificate(s) of Insurance
- Request for Taxpayer ID Number and Certification
- Form W-9
4.0 Substitutions
4.1 Whenever in the specifications any material, process, service, software or equipment is
indicated or specified by brand name, trade name, proprietary name or by name of the
manufacturer, such specification shall be deemed to be used for the purpose of
facilitating description of the material, process, service, software or equipment desired
and shall be deemed to be followed by the words “or equal”. Bidder may offer any
material, process, service, software or equipment that is compatible with the existing
Lincoln Electric equipment, meets the required comprehensive instructor training and
which shall be substantially equal or better in every respect to that so indicated or
specified subject to District approval.
General Conditions Page 3
4.2 Should the bidder wish to request any substitution for the material, process, service,
software or equipment indicated or specified by brand name, trade name, proprietary
name or by name of the manufacturer, the bidder shall submit a written request to the
District by April 12, 2016. If the substituted item is acceptable, the District will approve
it in an Addendum issued to all bidders of record. Request for substitution received
after April 12, 2016 will not be considered. There will be no exceptions made to these
timelines.
4.3 With respect to a proposed substitution of an “equal” item, the bidder shall submit all
pertinent and appropriate data substantiating its request for substitution by April 12,
2016. The District shall only consider substitution requests from the bidder submitting
the bid. The District is not responsible for locating or securing any information which
is not included in such substantiating data. The burden of proof as to the quality or
suitability of a proposed substitution shall be borne by the bidder. The District shall be
the sole judge as to the quality and compatibility of the proposed substitution, and the
decision of the District shall be final and conclusive. The District shall notify all bidders
of the decision concerning the proposed substitution.
4.4 It is expressly understood and agreed to by the bidder that the District reserves the right
to reject any such proposed substitution. If the material, process, service, software or
equipment offered by the bidder is not, in the sole opinion of the District, compatible
with the existing Lincoln Electric equipment, does not provide the required
comprehensive instructor training and is not substantially equal or better in every
respect to that specified, and is rejected by the District, then bidder expressly
understands and agrees that bidder shall furnish the material, process, service, software
or equipment specified by the District.
4.5 In the event bidder furnishes material, process, service, software or equipment other
than what was specified by the District and which was approved by the District and
which later is defective, then bidder, at its sole cost and expense, shall furnish the
District specified material, process, service, software or equipment or fully replace with
new the defective material, process, service, software or equipment, at District’s
discretion.
5.0 Evaluation Process
5.1 The Board of Trustees will award this bid to a single bidder according to the best
interest of the District, and their decision will be final. The Board of Trustees, as
represented by the evaluation team has reserved the sole right to evaluate the
bidder’s compliance with the bidding requirements for the purpose of selecting the
successful bidder. Bidders will be evaluated on their material content and
responsiveness to the requirements of the bid, price quoted, compatibility with all
existing Lincoln Electric and FANUC equipment, meeting the requirements of the
comprehensive instructor training program and references.
6.0 District Rights
6.1 The Board of Trustees reserves the right to reject any or all bids, to accept or reject any
one or more items of the bid, to decrease or increase quantities or to delete items
General Conditions Page 4
entirely, or to award items in any combinations; or to waive any irregularities or
informalities in the bids or in the bidding whichever is in the best interest of the District.
6.2 The District reserves the sole right to evaluate the Bidders’ compliance with bidding
requirements and product specifications for the purpose of selecting the successful
bidder.
6.3 The Board of Trustees will make its award on this bid according to the best interest of
the District, and its decision as to whether or not items submitted are the equal of items
specified will be final.
7.0 Bid Structure
7.1 To expedite and simplify the bid evaluation and to ensure that each bid receives the
same orderly review, all bids shall adhere to the format provided. Bids shall contain all
elements of the information without exception. Place your amounts only on the Bid
Form provided. To do otherwise may result in your bid being non-responsive.
8.0 Signature Page
8.1 The Signature Page must be signed by an authorized representative and returned
in a sealed envelope. To do otherwise will result in your bid being non-responsive.
9.0 Clarifications/Communications
9.1 Questions regarding the bid, or the intent thereof or any discrepancies, omissions or
inconsistencies in the bid documents shall be submitted in writing ONLY via fax,
19.15 Unit must be shipped on air ride truck and trailer
General Conditions Page 8
20.0 Fanuc Educational Software Bundle includes:
20.1 4D Graphics
20.2 Torch Guard
20.3 Touch Sensing and TAST
20.4 Auto Error Recovery with Fast Fault Recovery
20.5 Bump Box
20.6 Constant Path
20.7 Weld Equipment Library
20.8 Integrated PMC
20.9 KAREL
20.10 DCS Position & Speed Check
20.11 Fault & Incident Report
20.12 Menu Utility
20.13 Panel Wizard
20.14 Password Protection
21.0 Fanuc 300/500kg Hollow Single
21.1 Fanuc modular headstock positioners with Fanuc hollow-bore servo motors and
encoders. Positioner characteristics:
21.1.1 300/500 kg nominal load capacity
21.1.2 3,125/5,204 in*lb. workload torque
The overall performance of this positioner will be governed by part eccentricity and
load inertia.
22.0 15’ Conduit Kit
23.0 Xiris Camera
24.0 Risers for Headstock
25.0 Gas Regulator
26.0 Small Spool Dereeler
Bid Form Page 1
BID FORM – Lincoln Electric System 5 – 100 iC/12
Robot Arm (or equal)
ITEM
QTY/
UNIT
DESCRIPTION
UNIT
COST
EXT
COST
TAX (Y or N)
1 1 ea Lincoln Electric System 5 - 100iC/12 Robot
Arm incl 6-axis arm, 12 kg payload, 56.0” reach,
Fanuc R-30iB Robot Controller, Arctool
Software, 440-575VAC (±10%), 50/60Hz, 3
Phase, 30A Service and ANSI/RIA Compliant
Mechanical Unit/Controller (or equal)
Substitution:
$ $
2 1 ea Power Source and Feeder $ $
3 1 ea Powerwave R350 $ $
4 1 ea 4R220 Wire Feeder $ $
5 1 kit Arclink 25 ft Cable Kit $ $
6 1 kit .035 Drive Roll Kit $ $
7 1 pkg Magnum Pro Torch, MIG, Air Cooled Package incl 350 or 500A Air Cooled Torch with consumables and cable for through-arm mechanical units; Single Tool Center Point (TCP) - Changing between 350A and 550A expendables does not alter the robot TCP; Robust Cable System - Cables exceed industry standards by a factor of two in durability testing, Simplified Expendable Parts Selection - 350A and 550A rated consumables are inter-changeable across all gun models; Hex-Connect™ Gun Bushing - Ensures better electrical conductivity through full face contact as opposed to rotating connections that have single line contact; Extended Reach - Mounting bracket is designed to optimize clearance for tough to reach welding applications (or equal) Substitution:
$ $
8 1 lot Robot Hardware - Model A IO AID16D $ $
9 1 lot Robot Hardware - Model A IO AOR16G $ $
10 1 lot Fanuc Education Software Bundle incl 4D
Graphics, Torch Guard, Touch Sensing and
TAST, Auto Error Recovery with Fast Fault
Recovery, Bump Box, Constant Path, Weld
Equipment Library, Integrated PMC, KAREL,
DCS Position & Speed Check, Fault & Incident
$ $
Bid Form
Page 2
Report, Menu Utility, Panel Wizard, and
Password Protection (or equal)
Substitution:
11 1 lot System 5 Description – Single station workcell
with the Arcmate 0iB, 50iD and 100iC robot
arms. This package includes a palletized
workcell base and surround enclosure, plus a
single pneumatic pop-up curtain to provide
external arc flash protection. A single operator
palm station with cycle start, fault reset and E-
stop. Overall system dimensions of the workcell
design shall be approximately 72” x 128”. The
work table surface measures 24” x 70”.
Substitution:
$ $
12 1 ea Enclosure, completely painted steel, flash and
safety barrier
$ $
13 1 kit 15’ Conduit Kit $ $
14 1 ea Small Spool Dereeler $ $
15 1 ea Xiris Camera $ $
16 1 ea Gas Regulator $ $
17 1 lot Educational Discount (if any)
$ $
18 1 lot Freight & Delivery to Zip Code 92706
$ $
19 1 lot Installation
$ $
Subtotal
$
CA Sales Tax (8%)
$
Total
$
Bid Form
Page 3
BID FORM – Lincoln Electric System 5 - Fanuc Arcmate 100iC/12
Robot Arm (or equal)
ITEM
QTY/
UNIT
DESCRIPTION
UNIT
COST
EXT
COST
TAX (Y or N)
1 1 ea Lincoln Electric System 5 – Fanuc Arcmate
100iC/12 Robot Arm incl 6-axis arm, 12 kg
payload, 56.0” reach, Fanuc R-30iB Robot
Controller, Arctool Software, 440-575VAC
(±10%), 50/60Hz, 3 Phase, 30A Service and
ANSI/RIA Compliant Mechanical
Unit/Controller (or equal)
Substitution:
$ $
2 1 ea Power Source and Feeder $ $
3 1 ea Powerwave R350 $ $
4 1 ea 4R220 Wire Feeder $ $
5 1 kit Arclink 25 ft Cable Kit $ $
6 1 kit .035 Drive Roll Kit $ $
7 1 pkg Magnum Pro Torch, MIG, Air Cooled Package incl 350 or 500A Air Cooled Torch with consumables and cable for through-arm mechanical units; Single Tool Center Point (TCP) - Changing between 350A and 550A expendables does not alter the robot TCP; Robust Cable System - Cables exceed industry standards by a factor of two in durability testing, Simplified Expendable Parts Selection - 350A and 550A rated consumables are inter-changeable across all gun models; Hex-Connect™ Gun Bushing - Ensures better electrical conductivity through full face contact as opposed to rotating connections that have single line contact; Extended Reach - Mounting bracket is designed to optimize clearance for tough to reach welding applications (or equal) Substitution:
$ $
8 1 lot Robot Hardware - Model A IO AID16D $ $
9 1 lot Robot Hardware - Model A IO AOR16G $ $
10 Fanuc Education Software Bundle incl 4D
Graphics, Torch Guard, Touch Sensing and
TAST, Auto Error Recovery with Fast Fault
Recovery, Bump Box, Constant Path, Weld
Equipment Library, Integrated PMC, KAREL,
DCS Position & Speed Check, Fault & Incident
$ $
Bid Form
Page 4
Report, Menu Utility, Panel Wizard, and
Password Protection (or equal)
Substitution:
11 1 ea Fanuc 300/500kg Hollow Single (or equal)
Substitution:
$ $
12 1 kit 15’ Conduit Kit $ $
13 1 ea Xiris Camera $ $
14 1 ea Risers for Headstock $ $
15 1 ea Gas Regulator $ $
16 1 ea Small Spool Dereeler $ $
17 1 lot Educational Discount (if any)
$ $
18 1 lot Freight & Delivery to Zip Code 92706
$ $
19 1 lot Installation $ $
Subtotal
$
CA Sales Tax (8%)
$
Total
$
SIGNATURE
We (I) hereby agree to furnish the referenced items at the prices and terms stated, subject to the