2 19 FLUID HANDLING ACCESSORIES Graco provides a complete line of pump mounting hardware – from clamps, wall brackets, covers, elevators and rams to a variety of stands and carts. So whether you need to mount your pump on the wall, on a drum, or move it to another location, Graco gives you rugged hardware to fit your Graco pump for every application. • Sturdy wall mount brackets save floor space and enable container changes. • Elevators conveniently raise and lower heavy pumps. • Rams provide pump support while pressure-feeding pumps. • Carts and dollies make your pumps portable. • Stationary stands, wheel kits and bases provide added flexibility. • Reinforced, heavy gauge drum covers support pumps on open drums. • Drum and tank clamps stabilize your pumps on the fluid container. Pump Mounting Hardware ™ CATALYST PRIMER 1 PRIMER 2 COLOR 1 COLOR 2 SOLVENT AMR AMR
14
Embed
Pump Mounting Hardware - genmar.com.tr · 241988 3” ram without a plate C50007 3” ram without a plate or rods 55 Gallon (210 Liter) Drum Clamps Part No. Features Material 206537
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
2
19FLU ID HANDLING ACCESSOR IES
Graco provides a complete line of pump mounting hardware – from clamps, wall brackets, covers, elevators and rams to a variety of stands and carts. So whether you need to mount your pump on the wall, on a drum, or move it to another location, Graco gives you rugged hardware to fit your Graco pump for every application.
• Sturdy wall mount brackets save floor space and enable container changes.
• Elevators conveniently raise and lower heavy pumps.
• Rams provide pump support while pressure-feeding pumps.
• Carts and dollies make your pumps portable.
• Stationary stands, wheel kits and bases provide added flexibility.
• Reinforced, heavy gauge drum covers support pumps on open drums.
• Drum and tank clamps stabilize your pumps on the fluid container.
Pump MountingHardware
™
CATALYST
PRIMER 1
PRIMER 2
COLOR 1
COLOR 2
SOLVENT
AMR
AMR
2
20 FLU ID HANDLING ACCESSOR IES
Pump Mounting Hardware
Wall Brackets & PlatesQuality-made wall shelf brackets support pumps and free-up floor space.
Graco InstructionPart No. Pump Support Features Material Manual
203987 Fast-Flo 1:1 Mounts pumps with Steel, 306508Fire-Ball 5:1 2-1⁄8 in (54 mm) dia. cast ironDyna-Star™ 1:1 riser tubes. Steel Eagle™ 3:1 strap for securing pumpPresident 10:1 to cast iron V-Block.
236778 Dyna-Star 1⁄4:1 Mounts pumps with Steel, 308394Power-Star™ 1:1 4 in (102 mm) dia. cast ironPresident 3:1 riser tubes. Steel
strap for securing pumpto cast iron V-Block.
206778 Monark, President, Includes all screws, Painted 306783Viscount in-line washers and nuts for steeland 3-tie-rod divorced fastening pump to stubby pumps bracket.
207365 Monark, President, Includes all screws, Painted 306783Viscount in-line washers and nuts for steeland 3-tie-rod divorced fastening pump to stubby pumps bracket.
206220 Monark, President Includes all fittings for Painted 306783and Viscount II mounting pumps and steelstanchion tube paint filter. Order 206108 divorced pumps adapter plate separately
to mount 3-tie-rod divorced stubby pumps.
206221 Husky 1040, Senator, Includes gasket, screws, Painted 306783Bulldog, King, Viscount II, washers and nuts for steel3-tie-rod divorced fastening pump to bracket.stubby pumps, Glutton andmid-range High-Flo™
206108 Monark and Adapts Monark 3-tie-rod Painted 306783Viscount I divorced stubby pump steel
to fit 206220 bracketor 207373 drum cover.
205740 Dual stanchion tube for Provision for mounting Steel —Monark, President and paint filter/outlet manifold.Viscount to either stand 205640 or 205700
184140 Check-Mate™ pumps Used with 222781 ram. Painted steel 308026
162225 Monark and President Used with 206450 ram. Painted steel —pumps
210881
224835
203987236778
207365
206778
206221
2
21FLU ID HANDLING ACCESSOR IES
Pump Mounting Hardware
Elevators, Tubes and ControlsProvides pump support when pump is raised and lowered to change pails or drums.
Part No. Pump Support Features Material Manual205332 Use with 10 gal (38 l) Air fitting for quick coupler Steel 306466
cover 207704 and restrictor valve.
203664 10 gal (38 l) pail elevator Order pail truck 203650 Steel 306472not good for divorced separately to use with Fire-Ball, units (will not clear tierods) Monark and President pumps.
204124 Fast-Flo, Fire-Ball Includes cover 204123 Painted 306522and elevator 205332. steel
Part No. Pump Support Features Material Manual237747 Fire-Ball, Monark, Includes elevator 206231, Steel 306287
President pump support 237578, and air control kit 237579.
237746 Fire-Ball, Monark, Includes elevator 204385, Steel 306287President cover- air control valve 237579,mounted pumps floor mount base and
drum cover support 237578.
204352 Fire-Ball, Monark, Includes elevator 204385 Steel 306568President in-line and and bracket 204510.divorced design pumps without drumcover or bung adapter
204385 Fire-Ball, Monark Elevator only with Steel 306287President stationary base.
237902 Bulldog, King Includes elevator 207408, Steel 306287pump support 237578, and air control kit 237579.
237525 Elevator Retrofit Kit Designed to adapt elevators with Steel 308467old support ring to fit newSST drum covers 237306 thru237310, 190206, 238008 andothers. Drum support not included.
55 Gallon (210 Liter) Drum Elevator Base PlatesInstruction
Part No. Features Material Manual205339 Provides stable surface if floor is too Steel 306556
irregular for proper operation. Use with 207408 and 204385.
55 Gallon (210 Liter) Drum Inductor AssemblyInductor assemblies include elevator, pump bracket, inductor plate, up/down control, air hose and floor base plate.
InstructionPart No. Features Material Manual204490 Monark (224350) and President (224348). Steel 306556
Includes elevator, inductor plate, pump bracket, up/down control, air hose and steel base. Requires pump adapter 161251. Also requires flange (160754).
207039 Bulldog 5:1, 33:1 and Steel 306882King 45:1. Features same as 204490.
Part No. Pump Support Features Material Manual204510 Fire-Ball, Monark, Wishbone support and — 306568
President in-line pump controls for up/down.
206232 Bulldog, King Adjustable bracket attaches to Zinc-plated steel 306287elevator tube 207408.
55 Gallon (210 Liter) Air Control KitsGraco Instruction
Part No. Pump Support Features Manual206276 Bulldog or King pump Includes air regulator with gauge —
mounted on a heavy- restrictor valve, push-pull valve,duty elevator air-assist valve, hose and fitting
for directing air to pump, elevator and inductor plate.
207561 — Elevator up/down control. 306287
237579 — Air control kit similar to 206276; 306287plus includes air tube and mountingbracket to locate push-pull control onfront edge of stainless steel drum cover.
206232
207561
237579
2
24 FLU ID HANDLING ACCESSOR IES
Pump Mounting Hardware
Pail CartsFor job site mobility, Graco offers compact, stable carts and dollies. Available with various frame and tire sizes.
Portable CartsGraco Instruction
Part No. Pump Support Features Material Manual203650 5 and 10 gallon Two wheel cart with handle. Painted steel, 306436
(19 and 38 liter) pails Holds pail with pump. Use rubber wheelswith 203664.
238938 Monark, President, Compact, stable cart with Painted steel, 308136Viscount II with pneumatic tires, double rubber wheels3-tie-rod design and grip handle, heavy-duty displacement pump support pads. Handlelength less than supports large hose coil.20.5 in (52 cm)
240223 Monark Stubby, Light duty cart features Painted steel, 308762Husky 307 single handle, hose hook rubber wheels
pump/air control bracket.
244530 Senator, Bulldog, Similar to 240223 Painted steel, 308136(Xtreme) King, Viscount II but more strength rubber wheels
with fluid displacement for heavier pumps andpump length less than large hose coils.30 in (76 cm)
224137 Exclusively for Same as 203650 plus Painted steel, 308092Check-Mate pumps air lift elevator for raising rubber wheels
pump.
236943 Premier Welded frame. Painted steel, —rubber wheels
Band DollyGraco Instruction
Part No. Pump Support Features Material Manual205054 5 gallon (19 liter) pails Attaches to pail base. Painted steel, –
Large swivel wheels. rubber wheels
204144 10 and 16 gallon Attaches to pail base. Painted steel, 307879(38 and 61 liter) Large swivel wheels. rubber wheelsdrums.Also 5, 10, 15 gallon(19, 38, 56.8 liters)pressure pots.
203650
244530
204144
2
25FLU ID HANDLING ACCESSOR IES
Pump Mounting Hardware
Pump RamsStable, secure ram designs hold pumps in place during operation or above container while changing containers. Available in pail and drum styles. Puts pressure on high viscosity fluid surface to force material into pump inlet.
5 Gallon (19 Liter) Single Post Pail RamGraco Instruction
Part No. Pump Support Features Material Manual206450 Senator, Bulldog, Supports pump on CS 306838
King. Use adapter pneumatic post. Pump plate 162225 to bracket, air regulator, support Monark and 5 gallon (19 liters) pail ram, President. welded floor plate and
ram wiper plate.
222781 Exclusive use with Same as 206450. CS 306838Check-Mate pumps. Use adapter plate 184140 to support Monark and President.
237636 Bulldog Mount Narrow tie rod CS 306838
237561 Bulldog Mount Wide tie rod CS 306838
5 Gallon (19 Liter) Two Post Pail RamGraco Instruction
Part No. Pump Support Features Material Manual918495 Bulldog, King, Extra sturdy design. Dual Painted 310525
Viscount II pneumatic posts for extra steelpressure needed for viscous fluid evacuation through pump inlet. Air controls included. (Order air regulator and ram follower plate separately.)
5 Gallon (19 Liter) Plate ShieldsPart No. Features Material223689 Ten disposable shields Polyethylene
for 5 gallon (19 liter) pails.
55 Gallon (210 Liter) Two Post RamGraco Instruction
Part No. Pump Support Features Material Manual233087 34:1, 39:1, 45:1, 80:1 Premier; Dual pneumatic 6.5 in (165 mm) CS 310523
24:1, 50:1, 65:1 King; posts. 125 psi (8.6 bar, 0.8 MPa) max. 12:1, 31:1 Bulldog; inbound air pressure. (Order air 19:1 Senator; controls, ram plates, cross-overViscount Hydraulic kit separately.)
206450
222781
233087
2
26 FLU ID HANDLING ACCESSOR IES
Pump Mounting Hardware
55 Gallon (210 Liter) Two Post Drum RamsGraco Instruction
Part No. Pump Support Features Material Manual207279 Monark, President, Includes ram unit, 3 in (76.2 mm) Painted steel 306934
Senator, Bulldog, diameter posts, adjustable pump mount, King, Check-Mate, 55 gallon (210 liter) ram plate Dura-Flo pumps. Requires with double wiper rings, air 222776 mounting kit. controls, and 42 in x 25 in Adapter plate 162225 (107 cm x 63 cm) base plate. required to mount Monark (Order air regulator separately.)and President.
236726 Wiper Ring Replacement Kit. Easy to install. Superior wiping performance. Kit for 207279 ram plate includes two wiper rings and four retainer bands.
241988 3” ram without a plate
C50007 3” ram without a plate or rods
55 Gallon (210 Liter) Drum ClampsPart No. Features Material206537 Sturdy clamps hold drum Grey iron casting
centered on base plate in alignment with ram for properoperation. Clamps hold empty drum down while ram is being lifted out. 206537 is a set of 2 clamps.
55 Gallon (210 Liter) Double Ram ChangeoverPart No. Features918468 Pneumatic control automatically switches air supply
from one pump to a second pump when supply container empties. Allows uninterrupted supply.
55 Gallon (210 Liter) Low Level Cut-Off AlarmPart No. Features511270 Provides audible alarm to alert operator that drum
is empty.
55 Gallon (210 Liter) Plate ShieldsPart No. Features Material222792 Ten disposable shields for Polyethylene
55 gallon (210 liter) drums.
207279
206537
511270
2
27FLU ID HANDLING ACCESSOR IES
Pump Mounting Hardware
Stands and BasesPump support in a wide variety of sizes to match your installation requirements.
BasesGraco Instruction
Part No. Pump Support Features Material Manual203622 Fits 5, 10, 16 gallon Four swivel wheels support Painted steel 306409
(19, 38, 61 liters) sturdy platform. Hold-down containers clamps and secure pail to platform.
StandsGraco Instruction
Part No. Pump Support Features Material Manual205640 Pumps with threaded intake Sturdy, wide stance Cast iron, 306720
and fluid displacement pump support. Need adapter steelcylinder length less 206108 to fit Monark andthan 22 in (150 mm) President pumps.
205700 Pumps with threaded intake Sturdy, wide stance Cast iron, 306720and fluid displacement pump support. Need adapter steelcylinder length of 22 to 33 in 206108 to fit Monark and(550 to 840 mm) President pumps.
218742 High-Flo with high volume Extra sturdy floor stand. Painted steel –and high flow surge tanks
220581 High Flo mid-range Extra sturdy floor stand. Painted steel 307837with 220xxx part no.
217296 Foam-Cat proportioning Sturdy and stable design. Steel 307551pump and heater
203622
218742
220581
217296
2
28 FLU ID HANDLING ACCESSOR IES
Pump Mounting Hardware
Pail & Drum CoversGraco sturdy covers support a wide array of pumps. Choose from pail or drum covers.
5 Gallon (19 Liter) Pail CoversGraco Instruction
Part No. Pump Support Features Material Manual205786 Monark 23:1 Agitator mounting port. Secure Painted —
Part No. Pump Support Features Material Manual• 237306 President, Includes inspection port plug, 304 SST 308466
Monark, bolts, nuts, and gaskets.Standard and Fits agitator 206758 and siphonFast-Flo tube 206266.
• 237307 President and Includes inspection port plug, 304 SST 308466Monark bolts, nuts, and gaskets.
Fits agitators 204995 and 203711.
• 237308 President (two bolt mounting) Includes inspection port plug, 304 SST 308466bolts, nuts, and gaskets.Fits agitators 204995, 206219and filter 214724.
• 237309 King, Bulldog, Includes inspection port plug, 304 SST 308466Senator, and bolts, nuts, and gaskets.President Fits agitator 205715 and
air regulator 207651 (King), andair regulator 205712 (Bulldog).
• 237310 Standard Includes inspection port 304 SST 308466plug, bolts, nuts, andgaskets. Fits agitators 204995,206219 and filter 214724.
• 237949 Glutton Features inspection port plug, 304 SST 308466agitator port; return tube ports, Glutton bolt holes and siphon tube port.
• 238008 Most Graco pumps Features only inspection port with 304 SST 308466except Premier plug. No other holes. Additional
holes cut to fit particular application.
• 190206 Most Graco pumps Blank cover with no holes. 304 SST 308466except Premier Heavy duty 12 gauge SST.
Not passivated.
• 238283 Fits agitator 238157 Includes inspection port, 304 SST 308609return port and mounting holes for agitator.
• Waterborne compatible
Drum Cover AccessoriesGraco
Part No. Pump Support Features• 237524 Optional Handle Kit Includes two SST handles and fasteners.
• 112924 Drum Lip Gasket Disposable “snap-fit” gasket provides seal between top of drum andunderside of drum cover to minimize evaporation.
Note: See elevators and drum cover support accessories on pages 21-23. For bung adapter flanges see page 31.
• Waterborne compatible
237306
237307
237308
237309
237310
2
31FLU ID HANDLING ACCESSOR IES
Pump Mounting Hardware
Drum Bung Adapters & FlangesGraco adapters allow pumps to be threaded into 2 in npt bung openings. Supports a wide array of Graco pumps.
Drum Bung AdaptersGraco Instruction
Part No. Pump Support Features Material Manual204076 Mount lightweight lever Use with Sturdi-Clamp Steel —
pumps with 2-1⁄8 in (54 mm) 204095. Includesdiameter riser tubes O-ring seal.
224579 Same as 204706 except — Steel —224579 is air tight.
205573 Stainless steel pumps Includes thumbscrew Steel —with 2-1⁄8 in (54 mm) to secure pump riser tube diameter riser tubes at adjusted height. (Order
non-corrosive Sturdi-Clamp 204858 to mount pump on side of open head drum or tank separately.)
214583 Carbon steel pumps 2 in npt(m) thread. Use with Carbon 307427with 2 in diameter. Sturdi-Clamp 204858 to steel
mount pumps on open head drum or tank. (Order separately.)
222308 Fits Fast-Ball, Eagle, Includes bolt. Steel —Fire-Ball, President 2.15” diameter
217359 Fits Fast-Flo 1:1 Air tight, includes O-ring, 2” diameter Steel —
239966 Fits Fire-Ball 15:1, 50:1 and 80:1
Drum FlangeGraco Instruction
Part No. Pump Support Features Material Manual160754 Mounting for bung adapter 2 in npt(f) opening for Aluminum 306538
equipped with carbon steel bung adapter.pumps on open head drum Four bolt holes.when used with drum covers204574 or 200326 (orderseparately).
206258 Use with drum cover 237306 Three bolt holes Cast iron 308466
• 237571 Use with drum cover 237306 Three bolt holes 304 SST 308466
• Waterborne compatible
224579
214583
222308
217359
237571
2
32 FLU ID HANDLING ACCESSOR IES
Pump Mounting Hardware
Sturdi-ClampsGraco clamps hold pumps secure and upright in drum or tanks.
Graco InstructionPart No. Pump Support Features Material Manual210880 Fast-Flo 1:1 For 2 in (50.8 mm) tube, in-line only. CS 307427
203156 Carbon steel pumps U-bolt to clamp pump CS 306305with 2-1⁄8 in (54 mm) dia. at proper depth.riser tubes. For in-linepumps only.
204095 Carbon steel pumps U-bolt to clamp pump CS 306521with 2-1⁄8 in (54 mm) at proper depth. In-linedia. riser tubes in pumps only.bung hole of closed head drums when used with bung adapter 204076.
204858 Stainless steel pumps 2 in npt(f) opening for Cast iron, —using SST bung open head drums. nickel-plated,adapter 205573. CS
Grounding ClampGraco
Part No. Pump Support Features222011 Grounding wire and clamp 7.6 m (25 ft), 1.5 mm2 (10 gauge)