Packet Tracer 6 Building a VoIP Network
Packet Tracer 6Building a VoIP NetworkPart 1Eric KwokTechnical Manager 2014 Cisco Systems, Inc. All rights reserved.Cisco Networking AcademySession 1 AgendaResources for VoIPVoIP support in PTSimulation Mode
2014 Cisco Systems, Inc. All rights reserved.Cisco Networking AcademyVoIP Sample in PT
2014 Cisco Systems, Inc. All rights reserved.Cisco Networking AcademyVoIP Endpoint Devices in PTIP Communicator
Cisco 7960
Analog PhoneVoIP Adapter 2014 Cisco Systems, Inc. All rights reserved.Cisco Networking AcademySwitches supportCisco 3560Voice VLAN24 Ports PoE
Switch#show power inline Available:370.0(w) Used:6.3(w) Remaining:363.7(w)
Interface Admin Oper Power Device Class Max (Watts)--------- ------ ---------- ------- ------------------- ----- ----Fa0/1 auto on 6.3 IP Phone 2 15.4Fa0/2 auto off 0.0 n/a n/a 15.4Fa0/3 auto off 0.0 n/a n/a 15.4Fa0/4 auto off 0.0 n/a n/a 15.4Fa0/5 auto off 0.0 n/a n/a 15.4Fa0/6 auto off 0.0 n/a n/a 15.4Fa0/7 auto off 0.0 n/a n/a 15.4Fa0/8 auto off 0.0 n/a n/a 15.4Voice VLAN SupportedCatalyst 2950(T)/2960
Voice VLAN not SupportRouter Switch Module in PTNM-ESW-161 HWIC-4ESW 2014 Cisco Systems, Inc. All rights reserved.Cisco Networking AcademyObserving VoIP Packet Flow
2014 Cisco Systems, Inc. All rights reserved.Cisco Networking Academy
Making CallsSend Voice PacketsMake Calls
Enable SoundReceive and Playback Voice Packets 2014 Cisco Systems, Inc. All rights reserved.Cisco Networking AcademyVoIP Supported for Network Devices
Cisco 2811CME built-inCisco 2901/2911IOS 15 UCK9 2014 Cisco Systems, Inc. All rights reserved.Cisco Networking AcademyIOS 15 UCK9 activation2911(config)#teleph?% Unrecognized command
2911(config)#license boot module c2900 technology-package uck9
ACCEPT? [yes/no]: yes% use 'write' command to make license boot config take effect on next boot%IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = C2900 Next reboot level = uck9 and License = uck9%LICENSE-6-EULA_ACCEPTED: EULA for feature uck9 1.0 has been accepted. UDI=CISCO2911/K9:FTX15240JBR; StoreIndex=2:Evaluation License Storage
2911#reloadProceed with reload? [confirm]
2911(config)#telephony-service2911(config-telephony)#? auto Define dn range for auto assignment auto-reg-ephone Enable Ephone Auto-Registration create create cnf for ethernet phone 2014 Cisco Systems, Inc. All rights reserved.Cisco Networking AcademyCLI SupportRouter(config)#telephony-service Router(config-telephony)#? auto Define dn range for auto assignment auto-reg-ephone Enable Ephone Auto-Registration create create cnf for ethernet phone exit Exit from telephony config mode ip Define IP address and port for Telephony-Service/Fallback keepalive Define keepalive timeout period to unregister IP phones max-dn Maximum directory numbers supported max-ephones Define max number of IP phones no Negate or set default values of a command
R1# show runip dhcp pool its network 1.0.0.0 255.0.0.0 default-router 1.1.1.1 option 150 ip 1.1.1.1CME SupportDHCP Support 2014 Cisco Systems, Inc. All rights reserved.Cisco Networking AcademyEnd of Session 1 2014 Cisco Systems, Inc. All rights reserved.Cisco Networking AcademyThank you! 2014 Cisco Systems, Inc. All rights reserved.Cisco Networking Academy
