PT240 PNEUMATIC TIRE ROLLER TIER 3 CERTIFIED

ENGINEMake Cummins QSB 3.3 - C99

Type Tier 3 certified Turbocharged / Charge-air cooled

Rated horsepower 99 hp (74 kW) @ 2200 RPM

ELECTRICAL

Voltage 12 volts

Batteries 1

Amp hour 100

Cold cranking amps 640

STEERING

Steering type Hydrostatic

Axles 2 x independent axles

Front axle Isostatic w/ 2-pivot points

Rear axle Driven 2 tire pairs w/ Diff. lock as option

Steering angle (+/-) 32°

Oscillation angle +/- (front axle) 5°

Inside turning radius (l/r) (243/239 in) (6180/6065 mm)

Outside turning radius (l/r) (392/344 in) (9960/8735 mm)

OpERATOR’S COMpARTMENT

Operator work stations 2

Seats (vinyl/suspension) 2

Seatbelt (retractable) 2 in (51mm)

Rearview mirrors 2 (side mounted)

pRESSURIZED WATERING SYSTEM

Water tank 122 gal (460 L)

Tank type Polyethylene

Watering pumps 1

Water filtration stages 1

TRAVEL

Drive Powershift

Speeds 3 speed powershift

Maximum speed 12 mph (19 km/hr)

Oscillation +/- (front axle) 5°

Independent front axles 2

Gradeability % 25%

BRAkES

Service brake Hydro-pneumatic disc

Parking Disc

Emergency Disc

TIRES

Tires (smooth) 4 + 4 - 11.0 x 20 18PR

Tire overlap 2 in

Tire inflation system Central (AOR*) *(AOR) Air-on-the-run

CApACITIES

Fuel tank 66 gal (250 L)

Engine oil 1.85 gal (7 L)

Hydraulic reservoir 5.81 gal (22 L)

OpERATING WEIGHTS & CApACITIES

Operating weight 20,525 lbs (9310 kg) w/ cab option (add) 617 lbs (280 kg)

Maximum operating weight 52,910 lbs (24 000 kg)

Maximum ballast 32,386 lbs (14 690 kg)

One wheel load minimum 2,566 lbs (1164 kg)

One wheel load maximum 6,614 lbs (3000 kg)

Compaction width (max.) 78.2 in (1986 mm)

STANDARD EqUIpMENT

Fixed ROPS Open Platform with hand railsAnti-vandal coverHalogen worklights x 4 (55 watt / front and rear)Turn signal indicator (left and right)BreaklightsTilt open hoodPowershift Transmission (3-speed)Backup alarmRetractable seat belt - 2 in (51 mm) Dual operator stationsSuspension seats with foldable arm restsPressurized water systemWater filtration - single stageEmergency stop buttonMaster disconnect switchHornHourmeterLift and tie down provision - 4-pointWatering system drainsElectric fuse protectionSteering wheel spinner knobSpin-on fuel, engine oil and hydraulic filtersTool boxIndicator lights Battery Engine oil pressure Intake preheater Engine temperature Parking brake Sprinkler system ON/OFFMulti-function display Engine RPM Engine hours Fuel rate System voltage % engine load at current RPM Coolant temperature Oil pressure Fuel economy Current fuel consumptionBrush scrapers on each tire

OpTIONAL EqUIpMENT

Cab w/ heatCab air-conditioningRadio mounting w/ 2 speakers and antennaCocoa mat scrapersThermal apronsScrap metal for ballastRotating beaconEngine prefilterChock blocksSpare tire with rimRadial tiresWater tight chassis ballast compartment 460 liters - 122 gallonsEdge cutterPage 1 of 2

PT240 PNEUMATIC TIRE ROLLERTIER 3 CERTIFIED

DIMENSIONSA. Wheelbase 149.6 in (3800 mm)

B. Overall length 197.6 in (5020 mm)

C. Overall length w/ thermal aprons 227.6 in (5780 mm)

D. Overall height 122.4 in (3110 mm)

E. Seat height 96.5 in (2450 mm)

F. Compaction width 78.2 in (1986 mm)

G. Overall width of fixed parts 82.7 in (2100 mm)

G. Overall width of fixed parts w/ thermal aprons 90.9 in (2310 mm)

H. Ground clearance 13.4 in (340 mm)

H. Ground clearance w/ ballast plate under machine 10.2 in (260 mm)

A

DE

B

C

F

G

Form No. CCE201105PT240 Printed in U.S.A. © 2011 CNH America LLCReplaces form no. CCE201102PT240 PT240 • Page 2 of 2 All Rights Reserved

NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices, where applicable.NOTE: All engines meet current EPA emissions requirements.IMPORTANT: Case Construction Equipment Inc. reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Case Construction Equipment Inc. does not warrant the safety or reliability of attachments from other manufacturers.Case is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC, are the property of those respective companies.

www.casece.com

All Case construction equipment is biodiesel ready.

H

PNEUMATIC TIRE COMPACTORPT240

Achieve uncompromising results with the Case PT240 pneumatic tire compactor. The eight-tire PT240 delivers operating and application versatility. Operating versatility: through a wide range of ballast options, an on-board managed tire inflation control system, and an isostatic front axle required for a broad range of surfaces and applications. Application versatility: the rubber-tire “kneading effect” produced by the PT240 make it ideal for hot mix asphalt treatments, wear courses, chip - seal applications, and soil stabilization using asphalt emulsions, calcium chloride, fly ash, lime, Portland Cement modifiers and other road building materials.

The Case PT240 is the time-tested and proven solution for uniform density and smoothness throughout your full range of compaction requirements.

Simple to operate / highly productiveThe 99 net hp (74 kW), turbocharged engine, gives the Case PT240 pneumatic tire compactor the power-to-perform long passes on soil and provide smooth direction changes during finishing and sealing applications. Standard features include

power-shift transmission, hydrostatic steering, independent axles, and dual (left-and-right-side) operating positions provide optimal operator sight-lines.

Floating and oscillating dual front axles are designed to minimize bridging and maximize compaction performance on uneven surfaces. The four-plus-four tire configuration, with two-inch tire overlap, provides 78 inches of compaction width. Optional thermal aprons provide heat retention to minimize asphalt build-up on the tires.

VERsATIlITy-TO-PERfORM IN dEMANdINg AsPhAlT ANd sOIl APPlICATIONs

Case provides a broad range of solutions for all of your compaction needs.

The PT240 central tire inflation system (“air-on-the-run”) ensures proper tire inflation at all times and allows easy alignment of ground contact pressures (GCP) to job requirements. Tire brushes are standard equipment, cocoa mat scrapers are optional for asphalt applications.

Ballast options maximize performanceEasily adjustable operating weight ballasting enables the PT240 compactor to adapt to a full range of soil and asphalt production requirements. The base / unballasted operating weight is 20,525 lb (9,310 kg). Flexible combinations of ballast, or the optional water-proof ballast tank, allow for an operating weight range of up to 52,910 lb (24,000 kg) to meet specific application requirements.

Stays on the job longerThe PT240 compactor includes high-capacity water and fuel tanks to stay on the job for long work days. The corrosion-proof, pressurized water system features a 122-gal (460 L) polyethylene water tank. A 66-gal (250 L) fuel tank is standard.

VERsATIlITy-TO-PERfORM IN dEMANdINg AsPhAlT ANd sOIl APPlICATIONs

Comfort, control and convenienceThe PT240 pneumatic tire compactor is designed for operator comfort and convenience. In addition to dual work stations and automotive style controls, the PT240 offers suspension seats with foldable arm rests as standard equipment and an optional cab with heat and air-conditioning for all-weather use.

Multi-function equipment displays include engine RPM, engine hours, fuel rate, system voltage and engine load at current RPM. Standard travel controls include three-speed powershift drive with maximum speed of 12 mph (19.3 km/hr).

See for yourselfWant more information? Visit www.CaseCE.com or www.CompareCase.com. Then see your Case dealer for a demonstration, and put a Case PT240 pneumatic tire compactor to work.

www.casece.com

Always read the operator’s manual be-fore operating any equipment. Inspect equipment before using it, and be sure

it is operating properly. Follow the product safety signs and use any safety features provided.

All engines meet current EPA emission regulations.

All specifications are stated in accordance with SAE standards or recommended practices, where applicable.

IMPORTANT: Case Construction Equipment Inc. reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Availability of some models and equipment builds vary according to the country in which the equipment is used. The illustrations and text may include optional equipment and accessories and may not include all standard equip-ment. Your Case dealer/distributor will be able to give you details of the products and their specifications available in your area.

Form No. CCE201108PT240PrelimContains 10% post-consumer fiber

Case construction equipment is biodiesel friendly.

©2011 CNH America LLC. All rights reserved. Case is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC, are the property of those respective companies. Printed in U.S.A.

Full Tilt-Up Hood Provides Exceptional ServiceabilityCase has a reputation for easy-to-maintain and easy-to-service equipment – resulting in less down time and more profitability. The Case PT240 pneumatic tire compactors are no exception, with all drive train components accessible at ground level for quick daily service checks.

Coast-to-coast customer supportIn North America, Case equipment is sold and serviced by more than 375 dealer locations. No matter where you work, we’re here to support and protect your investment and exceed your expectations.

To locate a Case dealer or learn more about Case equipment or customer service, go to www.CaseCE.com or call 1-866-54CASE6.It all adds up. You can count on Case.

sPECIfICATIONs PT240

Weights

Unballasted weight 20,525 lb (9310 kg)

Fully ballasted weight 52,910 lb (24 000 kg)

Performance

Compaction width 78.2 in (1987 mm)

Tires

Tire configuration (front/rear) 4/4

Tire size 11.0 x 20 18PR

Capacity

Water tank capacity 122 gal (462 L)

Engine

Engine make Cummins

Engine model QSB3.3-C99

Gross power 99 hp (74 kW)

Drive Train

Transmission type 3-Speed Powershift

Max speed 11.8 mph (19 km/h)

Theoretical gradeability 25%

Dimensions

Length 16 ft 5.6 in (5020 mm)

Width 6 ft 10.7 in (2101 mm)

Height 10 ft 2.4 in (3109 mm)

Inside turning radius 19 ft 11 in (6071 mm)

Outside turning radius 28 ft 8 in (8738 mm)

Shown with optional cab.