AMCOL CORPORATION PRECISION LUBRICATION FOR BANDSAWS AMCOL pioneered MQL and refined the 6000 Series Applicator for bandsawing over decades. With our T60A Posi‐pump, biaxial hose, push‐to connect fittings, and pressure with flow regulated spray, our system is the most rugged, reliable, and user friendly system on the market. The Bandsaw Spray Assembly equally lubricates both sides of the blade; it is mounted above the blade where it is protected from blade breakage and does not interfere with blade replacement. 344 CANMIST and 305 E CANMIST handle the extreme temperatures and pressures of high speed band sawing. They are thermally stable and resist oxidation with no smoke or tacky residue. 344 CANMIST is used for steel, stainless, Inconel, titanium and other hard to cut metals. 305 E CANMIST is recommended where ferrous and non‐ferrous metals are interchanged and is especially effective in cutting aluminum. Phone: 248-414-5700 Fax: 248-414-7489 E-mail: [email protected] 21435 Dequindre Hazel Park, MI 48030 Made in the USA www.amcolcorp.com AMCOL CORPORATION MQL is Minimum Quantity Lubrication. MQL matches high performance lubricants with extremely accurate spray systems. With MQL, a minute quantity of lubricant is dispensed on the saw blade just prior to entering the cut. The lubricant is consumed with the cut. The result: dry parts, dry chips, and a dry machine. W H Y A M C O L ? W H Y A M C O L ? W H Y A M C O L ? PS01 AMCOL Precision Lubrication for Bandsaws (R1), 7/2013, AFU, P1 W H AT I S M Q L ? W H AT I S M Q L ? W H AT I S M Q L ? Benefits of MQL: Eliminate Coolant Mixing or Maintenance ‐ CANMIST is used as received. Simply fill the reservoir. No Coolant Mess ‐ Spray is directed at the side of the blade with no overspray. You’ll have dry parts and a dry floor. Eliminate Rust and Corrosion ‐ CANMIST is compatible with most metals. Dry Chips Get Better Value ‐ This is money in your pocket! MQL is high performance precision lubrication. AMCOL has an MQL system specifically for bandsaws.