1/4/2016 1 Shrub Pruning Kathy Zuzek Extension Educator, Horticulture University of MN Reasons to Prune Shrubs 1. Remove winter-injured, diseased, dead, crossing, or rubbing stems 2 Crossing branches Winter injury 07/10/2009 Reasons to Prune Shrubs 2. Rejuvenate or renovate old & overgrown shrubs 3 10/4/2009 06/03/2009 Reasons to Prune Shrubs Reasons to Prune Shrubs: 3. Create a unique plant habit: hedge, climbing plant, espalier. 4 Reasons to Prune Shrubs Reasons to Prune Shrubs: 4. Improve stem color 5 Reasons to Prune Shrubs Reasons to Prune Shrubs: 5. Increase flower or leaf size and/or intensify leaf color 6
7
Embed
Pruning Trees and Shrubs - Master Gardeners of Dakota County€¦ · Types of Shrub Pruning Cuts –Shearing •Used to remove new shoots on coniferous or deciduous shrubs in a formal
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1/4/2016
1
Shrub Pruning
Kathy ZuzekExtension Educator, Horticulture
University of MN
Reasons to Prune Shrubs
1. Remove winter-injured, diseased, dead, crossing, or rubbing stems
2Crossing branches
Winter injury
07/10/2009
Reasons to Prune Shrubs
2. Rejuvenate or renovate old & overgrown shrubs
3
10/4/200906/03/2009
Reasons to Prune Shrubs
Reasons to Prune Shrubs:3. Create a unique plant habit: hedge, climbing
plant, espalier.
4
Reasons to Prune Shrubs
Reasons to Prune Shrubs:4. Improve stem color
5
Reasons to Prune Shrubs
Reasons to Prune Shrubs:5. Increase flower or leaf size and/or intensify leaf
color
6
1/4/2016
2
Reasons to Prune Shrubs
6. Reduce or maintain plant size
7
Right Plant, Right Space
• Avoid crisis pruning with proper plant spacing at planting time:– Know the dimensions
of your planting space– Choose a plant whose
mature height and width fits that space so you aren’t forced to prune to maintain or reduce plant size
8
Tools of the Trade
• Scissors action of bypass pruner is a cleaner, healthier cut than the cut of an anvil pruner
• Long handle provides leverage & access into center of plant
Pruning & bow saws
• Used to cut branches larger than 1 ½”
Lopping shears
Folding saw
• Long flat blades used to shear hedges or other plants where a neatly trimmed, formal appearance is desire
Tools of the Trade
Hedge shears
Tools of the Trade
• Pruning equipment can spread disease.
• If you are removing diseased wood, disinfect pruning tools between cuts and between plants by soaking/spraying tool in full strength Lysol disinfectant to prevent spread of disease.
12
1/4/2016
3
Types of Pruning Cuts
1. Shearing
2. Heading Cuts
3. Thinning Cuts
4. Rejuvenation
5. Renovation
Types of Shrub Pruning Cuts – Shearing
• Used to remove new shoots on coniferous or deciduous shrubs in a formal hedge.
• Clip while new growth is green & succulent to within an inch or so of the last shearing.
• Be sure to prune so the bottom of the hedge is wider than the top. 14
Types of Shrub Pruning Cuts – Heading Cut
• Cutting a shoot or stem back to ¼” above a bud or to its attachment point with another shoot somewhere within a plant canopy.
Back to a bud
Good Bad Bad
Heading cut back to buds: promotes new shoot growth below the cut for a bushier look
plantphys.info/apical/apical.html
When the apical bud is removed, you eliminate the auxin source & lateral buds grow.
Auxin produced in the apical buds suppresses growth of lateral buds
Types of Shrub Pruning Cuts – Heading Cut
• Removal of branches at attachment point: reduces plant size or plant density without affecting plant’s natural shape
Back to another shoot
• Cutting a shoot or stem back to a bud or to its attachment point with another shoot somewhere within a plant canopy
Types of Shrub Pruning Cuts – Heading Cut
• Heading cuts are common on shrubs with only a few main stems (burning bush, witch hazel, rhododendron, conifer shrubs, etc.)
Back to existing shoot
Back to a bud
burning bush
1/4/2016
4
1) Before pruning 2) Red = heading cuts made w/I plant crown
3) Outward growing branches left 4) Natural habit retained
Graphics Credit: University of Florida
Heading cuts are common on soneconiferous shrubs (arborvitae, yews,
junipers, hemlocks)
Heading cuts are also used to maintain size of an informal hedge
Thinning–Rejuvenation Pruning
In late winter or early spring:• Remove dead stems• Cut the oldest 1/3 of
the main stems (in the center of the plant) back to 3-6” above the ground.
22
Reduces plant density and stimulates new stem growth in old shrubs
Restoring bright stem color in a ‘Bud’s Yellow’ dogwood with a rejuvenation cut
4. Heading cuts can be used to reduce height 23
1. Notice older brown branches 2. Removal of older brown older branches
3. New stems will grow from plant crown
Rejuvenation & heading cuts are often combined to manage shrub
size and shape
24
1/4/2016
5
Thinning–Renovation Pruning
• The most extreme form of thinning is cutting EVERY stem back to 3-6”.
• Often done on forsythia, weigela, dogwoods and other enormous and fast-growing shrubs.
25
10/4/2009
07/10/2009
06/03/2009Removal of every stem to 3-6” to renovate large unhealthy azaleas.
26
Pruning Conifers
Pines don’t produce shoots from older wood because:
• they have buds only at branch tips.
• So pruning consists of:
– pruning back to a lateral branch or the main stem.
– Pinching ½ of a “candle” off only in spring to slow the growth rate or produce more branches.
– Anything else will leave a stump with no buds
27
Pruning Conifers
• Branches can be removed back to a lateral branch or to the main stem
or
28
Spruce, & Fir don’t produce shoots from older wood
buds
Pruning Conifers
• Branch tips can be pruned back to anywhere on the current season’s growth because there are buds all along this growth for next year’s growth.
• Anything else will leave a stump with no buds
29
Spruce, & Fir don’t produce shoots from older wood
No buds
buds
Pruning Conifers
• Branches can be removed back to a lateral branch or the main stem.
• Branch tips can be pruned back into 1- or 2-year old wood where dormant buds will generate new foliage