Scaling Workshop Provisioning and Capacity Planning Brian Brazil Founder
Scaling WorkshopProvisioning and Capacity Planning
Brian BrazilFounder
Who am I?Engineer passionate about running software reliably in production.
● TCD CS Degree● Google SRE for 7 years, working on high-scale reliable systems such as
Adwords, Adsense, Ad Exchange, Billing, Database● Boxever TL Systems&Infrastructure, applied processes and technology to let
allow company to scale and reduce operational load● Contributor to many open source projects, including Prometheus, Ansible,
Python, Aurora and Zookeeper.● Founder of Robust Perception, making scalability and efficiency available to
everyone
GoalsAt the end of the workshop you will be able to:
● Estimate how much spare capacity you have in less than 5 minutes● Estimate how much runway that capacity provides● Determine how many machines you need● Spot common potential problems as you scale
This should set you up for your first 1-2 years, if not more
AudienceThis is an introductory workshop to teach you the basics.
Your company:
● Uses Unix in production● Has a relatively simple setup/small number of machines● Operations primarily performed by developers● Performance has not been a primary consideration in your product
I’m also going to focus on webservices-type systems rather than offline processing or batch.
Capacity
Estimate your capacity in 3 easy steps!
1. Measure bottleneck resource at peak traffic2. Divide to get fraction of limit3. Multiply by peak traffic
Estimate your capacity in 3 not so easy steps!
1. What’s your bottleneck? How do you measure it?2. What’s your bottleneck’s limit?3. What’s your peak traffic?
Step 1: What’s the bottleneck?The most common bottlenecks:
1. CPU2. Disk I/O
Less common: network, disk space, external resources, quotas, hardcoded limits, contention/locking, memory, file descriptors, port numbers, humans
Step 1: Where’s the bottleneck?Look at CPU % and Disk I/O Utilisation on each type of machine.
If you’ve monitoring, use that.
Failing that:
sudo apt-get install sysstat
iostat -x 5
Step 1: Iostatavg-cpu: %user %nice %system %iowait %steal %idle 4.24 0.00 1.18 0.98 0.00 93.60
Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %utilsda 0.00 1.40 0.00 3.80 0.00 45.20 23.79 0.00 1.05 0.00 1.05 0.84 0.32sdb 0.00 1.40 0.00 21.00 0.00 267.20 25.45 0.09 4.11 0.00 4.11 4.11 8.64sdc 0.00 1.40 0.00 20.00 0.00 267.20 26.72 0.06 3.24 0.00 3.24 3.24 6.48md0 0.00 0.00 0.00 2.00 0.00 8.00 8.00 0.00 0.00 0.00 0.00 0.00 0.00
The numbers you care about are %idle and %util.
%idle is the amount of CPU not in use. %util is the amount of disk I/O in use, take the biggest one.
Step 2: What’s the limit?We now know the CPU and disk I/O usage on each machine at peak.
Which is the bottleneck though?
Need to know the limit. Rules of thumb:
● 80% limit for CPU● 50% limit for Disk I/O
Step 2: DivisionFind how full each CPU and disk is.
Say we had a disk 10% utilised, and a CPU 20% utilised (80% idle).
0.1/0.5 = 0.2 => Disk IO is at 20% of limit
0.2/0.8 = 0.25 => CPU is at 25% of limit
CPU is our bottleneck, with 25% of capacity used.
Step 2: Utilisation Visualisation
Step 3: Peak trafficNow that we know how full our bottleneck is, we need to know how much capacity we have.
Figure out how much traffic you were handling around the time you measured cpu and disk utilisation.
You might do this via monitoring, or parsing logs or if you’re really stuck tcpdump.
Step 3: The 2nd divisionLet’s say our queries per second (qps) was 10 around peak.
Our CPU was our bottleneck, and about 25% of our limit.
10/0.25 = 40qps
So we can currently handle a maximum traffic of around 40qps
Step 3: Capacity Visualisation
Now you can estimate your capacity in 3 easy steps!1. Measure bottleneck resource at peak traffic
○ Use monitoring or iostat to see how close you are to the limit, say 20% full
2. Divide to get fraction of limit○ With a limit of 80% for CPU, you’re 20/80 = 25% full
3. Multiply by peak traffic○ Traffic was 10qps, so 10/0.25 = 40qps capacity
Runway
How much runway do you have?You now have a rough idea of how much capacity you have to spare.
In the example here, we’re using 10qps out of 40qps capacity.
How long will that 30qps last you?
The two main factors are new customers and organic growth.
New CustomersNew customers/partners are your main source of traffic.
Look at your traffic graphs around the time a new customer started using your system.
If the customer had say 1M users and you saw 10qps increased peak traffic, you can now predict how much traffic future customers will need.
Based on sales predictions, you can tell how much capacity you’ll need for new customers.
Organic growthOver time your existing customers/partners will use the system more and more, new employees are hired, they get new customers etc.
Look at your monitoring’s traffic graphs over a few months to see what the trend is like. Do your best to ignore the impact of launches.
Calculate your % growth month on month.
Starting out, it’s likely that organic growth will not be your main consideration.
Calculating runwayOnce again in the example here, we’re using 10qps out of 40qps capacity.
Each 1M user customer generates 10qps of additional traffic.
You also expect a negligible amount of organic growth.
This means you can handle 3M more users worth of new customers.
If you’re signing up one 1M user customer per month, that gives you 3 months.
Provisioning
Provisioning vs Capacity PlanningCapacity Planning:
In 6 months I will have 7 new customers, and need to be able to handle 100qps in total
Provisioning:
To handle 100qps I need X frontends and Y databases
Provisioning: What can a machine handle?Continuing our example, let’s say we had 4 machines and each reported being at CPU 20% (25% of the 80% limit) while dealing with 10qps each.
The key metric is qps per machine.
10qps/.2 machines = 50qps/machine
Can only safely use 80% of the machine, so 50*.8 = 40qps
So we can handle 40 qps per machine.
Provisioning: How many machines do I need?If we want to handle 100qps, we need 100/40 = 2.5 machines. So 3 machines.
For each type of machine, calculate the incoming external qps it can handle and how many you need.
Don’t fret about $10/month worth of cost, it’s not worth your time.
Provisioning: Visualisation
Review: The Basics
● Estimating capacity:○ Measure bottleneck at peak○ Find how near bottleneck is to the limit○ Calculate spare capacity based on peak traffic
● Keep an eye on new customers/partners and organic growth to track runway● For provisioning, calculate qps/machine for each type of machine
Life is not Basic
A few wrinklesI’ve glossed over a lot of detail so you can go away from today’s workshop with something you can immediately use.
Some questions ye may have:
● Why measure at peak traffic?● What if I don’t have much traffic?● Why 80% limit on CPU and 50% on disk?● What if a machine fails?● What if things aren’t that simple?● Doesn’t autoscaling take care of all this for me?
Why measure at peak traffic?As your utilisation increases: ● Latency increases● Performance decreases
In addition skew due to background of constant CPU usage is decreased
Measuring at peak helps allow for these factors.
Beware the knee.
What if I don’t have much traffic?If you don’t have enough traffic to show up in top or iotop, then these techniques won’t help you much.
You could loadtest, but that takes time. Or use rules of thumb.
Easier way: Use latency to estimate throughput.
If your queries take 10ms, then you can probably handle 100/s
Why 80% limit on CPU and 50% on disk?For CPU due to utilisation/latency curve you want to avoid having too high utilisation.
If you have the CPU to yourself 90-95% is safe in a controlled environment with good loadtesting. This is uncommon, so leave safety margin for OS processes etc.
For spinning disks the impact of utilisation tend to be more problematic, and background tasks tend to use a lot of disk.
What if a machine fails?You generally should add 2 extra machines beyond that you need to serve peak qps. This is commonly known as “n+2”.
This is to allow for one machine failure, and to let you take down a machine to push a new binary, perform maintenance or whatever.
This also gives you some slack in your capacity. As you grow, more sophisticated math is required.
What if things aren’t that simple?Lots of other issues can throw a spanner in the works.
● Heterogeneous machines● Varying machine performance● Varying traffic mixes● Multiple datacenters● Multi-tiered services
As a general rule try to keep things simple. A perfect model is brittle and usually takes more time than it’s worth.
Doesn’t autoscaling take care of all this for me?
Short answer Long answer
Doesn’t autoscaling take care of all this for me?
Short answer
No
Long answer
Doesn’t autoscaling take care of all this for me?
Short answer
No
Long answer
Haha, Haha.
No
Doesn’t autoscaling take care of all this for me? EC2 Autoscaling can eliminate some of the day-to-day work in provisioning servers.
There’s operational and complexity overhead, as you have to maintain images and systems that can be spun up.
You have to wait for instances to spin up - can’t rely on it completely for sudden spikes. You need to do math to tune it to be able to handle a spikes.
You still have to tune everything. Control systems are hard.
Wrapping Up
Monitoring MattersA common thread through this workshop is that monitoring is what should be providing you the information you need to make operational decisions.
Make sure you have a good monitoring system.
Logs are not monitoring, though better than nothing.
I recommend Prometheus.io: If it didn’t exist I would have created it.
Production MattersProvisioning and Capacity planning is just one aspect of production. There’s many others involved with running your company:
Robust Perception can help you with all of this and more.
● Deployment● Change Management● Configuration Management● Reliability● Architecture● Design Feasibility● Cost Management
● Performance Tuning● SLAs● Contract Sanity Check● Debugging● Alerting● Oncall● Incident Management
Questions?
Blog: www.robustperception.io/blog
Twitter: @RobustPerceiver
Email: [email protected]
Linkedin: https://ie.linkedin.com/in/brianbrazil