SECURITY SYSTEMS USING MOBILE UNIT Functionality: - This is security device that detects change in IR radiations. A PIR sensor is installed for this purpose. When an intruder enters in its area of influence it detects the IR radiations from his body and can trigger the actual circuit. A microcontroller is placed that receives the signal from PIR sensor and functions as per the program embedded in it. A mobile unit is placed at one of the output ports of MC, which gets appropriate signals for making a call. It makes a call multiple number of times to make sure that the call is made even in the presence of some network problems. After the PIR detects the intruder, it activates the mobile via MC to make a call to number already fed in it. This even triggers a buzzer that makes continuous noise until the PIR gets reset. Future developments: - These PIRs are places at different corners of a room/hall and can be connected in a network. Depending upon the volume of the room/hall we can use any no.of sensors. We can develop a distributed security system by placing a central system to monitor all the sensors placed in different rooms/halls. Feedback mechanism for the call through mobile can be developed. The mobile unit is removed and the entire setup can be integrated in a single chip, which makes the more effective.
Prototype of Security Systems Using Mobile Unit
Nov 24, 2014
Security system for detecting intruders into houses,offices.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SECURITY SYSTEMS USING MOBILE UNIT
Functionality: -
This is security device that detects change in IR radiations. A PIR sensor is installed for this purpose. When an intruder enters in its area
of influence it detects the IR radiations from his body and can trigger the actual circuit.
A microcontroller is placed that receives the signal from PIR sensor and functions as per the program embedded in it.
A mobile unit is placed at one of the output ports of MC, which gets appropriate signals for making a call. It makes a call multiple number of times to make sure that the call is made even in the presence of some network problems.
After the PIR detects the intruder, it activates the mobile via MC to make a call to number already fed in it.
This even triggers a buzzer that makes continuous noise until the PIR gets reset.
Future developments: -
These PIRs are places at different corners of a room/hall and can be connected in a network. Depending upon the volume of the room/hall we can use any no.of sensors.
We can develop a distributed security system by placing a central system to monitor all the sensors placed in different rooms/halls.
Feedback mechanism for the call through mobile can be developed. The mobile unit is removed and the entire setup can be integrated in a single
chip, which makes the more effective. The system can be programmed to perform various actions after detection
like locking of doors, to control alert lights etc.
BY: -
SREE NILENDRA GADRE(Y7EC305)
N.S.KRISHNA KUMAR(Y7EC234)
GOPALA SARMA AKSHINTALA(Y7EC222)
A.ALEX VIKAS(Y7EC202)
P.SREYASH(Y7EC306)
Related Documents
