Top Banner
Lightning connector port Headphone jack Mute switch ONLY AT BEST BUY Back Front SEULEMENT CHEZ BEST BUY This protective case lets you use your iPhone in a variety of adverse conditions. It provides easy access to all buttons and ports, while providing outstanding protection against normal wear and tear. Package contents Protective case for iPhone 5/5S Quick Setup Guide Features Compatible with iPhone 5 and 5S Easy access to all ports and buttons Touch sensitive screen protector 4 Place the front cover, with the iPhone inside, face-down on a flat surface, then slide the bottom end of the back cover (the end with the two port covers) into the front cover so that the grooves fit together. 5 Press the two halves together until they snap closed, then slide your fingers up both sides to make sure the case is tightly closed. 6 Close the covers for the mute switch, headphone jack, and lightning connector port. Removing a phone from the case 1 Open the upper-left corner slot with your finger or a coin. 2 Gently pull the sides to release the back cover. Maintenance after using the case As needed, rinse the case with tap water and dry with a paper towel or soft cloth. When the case is completely dry, store the case in protective material to make sure that the screen is properly protected. Keep the case away from heat, corrosive chemicals, and sharp objects. One-year limited warranty Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2013 BBY Solutions, Inc. All Rights Reserved. Putting a phone in the case 1 Open the upper-left corner slot with finger or coin. 2 Open the back cover. 3 Put the iPhone inside the case. PROTECTIVE CASE FOR iPHONE 5/5S QUICK SETUP GUIDE Cet étui de protection permet d'utiliser l'iPhone dans plusieurs conditions difficiles. Il permet un accès à toutes les touches et tous les ports, tout en fournissant une protection totale contre l'usure normale. Contenu de l'emballage Étui de protection pour iPhone 5/5S Guide d’installation rapide Caractéristiques Compatible avec l’iPhone 5 et 5S Accès complet à tous les ports et toutes les touches Protecteur d'écran tactile Insertion du téléphone dans l'étui 1 Ouvrir la fente du coin supérieur gauche avec le doigt ou une pièce de monnaie. 2 Ouvrir le couvercle dorsal. 3 Mettre l'iPhone dans l'étui. ÉTUI DE PROTECTION POUR iPHONE 5/5S GUIDE D’INSTALLATION RAPIDE Before using your new product, please read these instructions to prevent any damage. Avant l’utilisation de ce produit neuf, lire ces instructions afin d'éviter tout dommage.
2

PROTECTIVE CASE ÉTUI DE PROTECTION FOR iPHONE 5/5S …

May 29, 2022

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: PROTECTIVE CASE ÉTUI DE PROTECTION FOR iPHONE 5/5S …

Lightning

connector port

Headphone jackMute switchONLY AT BEST BUY

Back

Front

SEULEMENT CHEZ BEST BUY

This protective case lets you use your iPhone in a variety of adverse conditions. It provides easy access to all buttons and ports, while providing outstanding protection against normal wear and tear.

Package contents• Protective case for iPhone 5/5S• Quick Setup Guide

Features• Compatible with iPhone 5 and 5S• Easy access to all ports and buttons• Touch sensitive screen protector

4 Place the front cover, with the iPhone inside, face-down on a flat surface, then slide the bottom end of the back cover (the end with the two port covers) into the front cover so that the grooves fit together.

5 Press the two halves together until they snap closed, then slide your fingers up both sides to make sure the case is tightly closed.

6 Close the covers for the mute switch, headphone jack, and lightning connector port.

Removing a phone from the case1 Open the upper-left corner slot with your

finger or a coin.2 Gently pull the sides to release the back

cover.

Maintenance after using the case• As needed, rinse the case with tap water

and dry with a paper towel or soft cloth.• When the case is completely dry, store the

case in protective material to make sure that the screen is properly protected.

• Keep the case away from heat, corrosive chemicals, and sharp objects.

One-year limited warranty

Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.©2013 BBY Solutions, Inc. All Rights Reserved.

Putting a phone in the case1 Open the upper-left corner slot with finger

or coin.

2 Open the back cover.

3 Put the iPhone inside the case.

PROTEC TIVE CASE FOR iPHONE 5/5S

QUICK SETUP GUIDE

Cet étui de protection permet d'utiliser l'iPhone dans plusieurs conditions difficiles. Il permet un accès à toutes les touches et tous les ports, tout en fournissant une protection totale contre l'usure normale.

Contenu de l'emballage• Étui de protection pour iPhone 5/5S• Guide d’installation rapide

Caractéristiques• Compatible avec l’iPhone 5 et 5S• Accès complet à tous les ports et toutes les

touches• Protecteur d'écran tactile

Insertion du téléphone dans l'étui1 Ouvrir la fente du coin supérieur gauche

avec le doigt ou une pièce de monnaie.

2 Ouvrir le couvercle dorsal.

3 Mettre l'iPhone dans l'étui.

É TUI DE PROTEC TION POUR iPHONE 5/5S

GUIDE D ’INSTALL ATION R APIDE

Before using your new product, please read these instructions to prevent any damage.

Avant l’utilisation de ce produit neuf, lire ces instructions afin d'éviter tout dommage.

PT-A5UP2B_13-0492_QSG_V3_Final Press.ai 1 10/9/2013 1:57:42 PMPT-A5UP2B_13-0492_QSG_V3_Final Press.ai 1 10/9/2013 1:57:42 PM

Page 2: PROTECTIVE CASE ÉTUI DE PROTECTION FOR iPHONE 5/5S …

V3 13-0492

Partie

arrière

Partie

avant

Parte

posterior

Parte

frontal

SOLO EN LAS TIENDAS BEST BUY

Port du connecteur

Lightning

Prise pour casque

d'écouteTouche de mise

en sourdine

Conector

Lightning

Toma de auricularesConmutador de

silenciar

4 Placer le couvercle frontal, avec l'iPhone à l'intérieur, tourné vers le bas sur une surface plate, puis faire glisser la partie inférieure du couvercle dorsal (l'extrémité avec les deux obturateurs de ports) dans le couvercle frontal afin que les rainures s'ajustent ensemble.

5 Exercer une pression sur les deux moitié jusqu'à enclenchement, puis vérifier en glissant les doigts vers le haut de chaque côté que l'étui est bien fermé.

6 Fermer les obturateurs de la touche de mise en sourdine, de la prise casque et du port du connecteur Lightning.

Retrait du téléphone de l'étui1 Ouvrir la fente du coin supérieur gauche

avec le doigt ou une pièce de monnaie.2 Tirer délicatement sur les côtés pour

extraire le couvercle dorsal.

Entretien après avoir utilisé l'étui• Si besoin est, rincer l'étui avec de l'eau du

robinet et le sécher avec du papier essuie-tout ou un chiffon doux.

• Quand l'étui est complètement sec, le ranger dans un matériau de protection afin que l'écran soit correctement protégé.

• Conserver l'étui à l'écart de la chaleur, des produits chimiques corrosifs et des objets pointus.

Garantie limitée d’un an

Distribué par Best Buy Purchasing, LLC, 7601 Penn Av. South, Richfield, MN 55423 É.-U.© 2013 BBY Solutions, Inc. Tous droits réservés.

Este estuche de protección le permite usar su iPhone en varias condiciones difíciles. Permite un acceso cómodo a todos los botones y puertos, mientras proporciona una excelente protección contra el desgaste normal.

Contenido del paquete• Estuche de protección para iPhone 5/5S• Guía de instalación rápida

Características• Compatible con el iPhone 5 y 5S• Acceso cómodo a todos los puertos y

botones• Protector de pantalla táctil

4 Coloque la cubierta frontal, con el iPhone adentro, con la parte frontal hacia abajo, en una superficie plana y deslice la parte inferior de la cubierta posterior (la parte con los dos tapones de puertos) en la cubierta frontal de tal modo que las ranuras se alineen.

5 Junte las dos partes hasta que se encajen, después deslice sus dedos en cada lado para asegurarse de que el estuche esté bien ajustado.

6 Cierre los tapones del conmutador de silenciar, de la toma de auriculares y del puerto del conector Lightning.

Extrayendo un teléfono del estuche1 Abra la ranura del ángulo superior

izquierdo con su dedo o una moneda.2 Tire de los lados delicadamente para

liberar la cubierta posterior.

Mantenimiento después del uso del estuche• Cuando es necesario, enjuague el estuche

con agua y séquelo con un papel toalla o un paño suave.

• Cuando el estuche está completamente seco, almacénelo en un material de protección para asegurar que la pantalla sea correctamente protegida.

• Guarde el estuche fuera del calor, de los químicos corrosivos y de los objetos afilados.

Garantía limitada de un año

Distribuido por Best Buy Purchasing, LLC, 7601 Penn Av. South, Richfield, MN 55423 E.U.A.© 2013 BBY Solutions, Inc. Todos los derechos reservados.

Colocando un teléfono en el estuche1 Abra la ranura del ángulo superior

izquierdo con su dedo o una moneda.

2 Abra la cubierta posterior.

3 Coloque el iPhone en el estuche.

ESTUCHE DE PROTECCIÓN PARA iPHONE 5/5S

GUÍA DE INSTAL ACIÓN R ÁPIDA

Antes de usar su producto nuevo, lea estas instrucciones para evitar cualquier daño.

PT-A5UP2B_13-0492_QSG_V3_Final Press.ai 2 10/9/2013 1:57:45 PMPT-A5UP2B_13-0492_QSG_V3_Final Press.ai 2 10/9/2013 1:57:45 PM